General :: Host Key Verification Failed / Resolve This?
Mar 29, 2011
I know that there are multiple threads with problems like this, but still i didn't found my answer.
The situation is like this:
I have a local server and a remote server, i did a ssh key swap so i can log on to the remote server with no problems (automatically logging on, no need to enter pass or login).
I've made a script that copies (with SCP) a file FROM the REMOTE server TO the LOCAL server (NOT FROM the LOCAL server to the REMOTE server !!!!), and then i get an error like code...
View 2 Replies
ADVERTISEMENT
Feb 6, 2010
i'am running:
Distributor ID: Ubuntu
Description: Ubuntu 9.10
Release: 9.10
Codename: karmic
kernel: 2.6.31-16-generic
pc and laptop are connected via switch. hard wired and static ip on ubuntu side is a wlan running connected to the internet. on my laptop: i am running:
Distributor ID: SuSE
Description: SuSE Linux 9.0 (i586)
Release: 9.0
Codename: n/a
kernel: 2.4.21-99-default ( year 2004 )
on unbuntu side i use: SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2. on suse side i use: SSH-1.99-OpenSSH_3.7.1p2. both sides are using: Protocol 2 and ServerKeyBits 768 and now my problem. i can connect from ubuntu to suse using ssh without a problem. when i try to connect from suse to ubuntu i always get: Host key verification failed and nothing else. no hint about middle man attack or so. no change to answer -> save the new key. the permissions of ~/ssh my both sides are id_rsa.pubcorrect i think ( drwx------) and the permissions of : authorized_key, id_rsa, known_hosts are all - -rw------- 1 ( not linked or so ).
View 2 Replies
View Related
Jan 30, 2011
I just installed openssh-server, and all tutorials say it should work out of the box. But it doesn't, it dies with "Host key verification failed."
Here is the log:
Code:
nick@rilmir:~$ ssh -vv localhost
OpenSSH_5.1p1 Debian-5ubuntu1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[Code].....
View 9 Replies
View Related
Jul 14, 2011
I have Slack 64 bit installed on my desktop, sshd is running. From my netbook running Ubuntu I can not connect through ssh, I always get 'Host key verification failed' message. I have tried a lot of things, I got to a point where I could not ssh either way. So today I removed and re-installed Openssh on both systems. I made sure I was using the new ssh_config and sshd_config files on both systems. Right now I can ssh from the desktop ( Slack ) to Ubuntu ( netbook ) but not the other way around. I do not get a known_hosts file created on Slack, I do get one on Ubuntu. I don't understand why Openssh server on Slack is not accessible, and why the known_hosts file is not getting created.
[code]...
is what I have installed. Most of the suggestions I have found suggest deleting the entry for the remote host. Problem is it never gets created. How do I go about fixing this? This is a link to the last howto I followed, after the re-install of Openssh. [URL]...
View 13 Replies
View Related
Sep 27, 2010
Im trying to do a remote execution of scripts through SSH in PHP. What im doing:
-Use PHP in conjunction with nagios' check_by_ssh script to execute the script.
-I used
[code]...
-It gives me a 'Host key verification failed' error even though i enabled it to ssh from my server to server01 without password. My Qn: How do i get it to work?
View 3 Replies
View Related
Mar 12, 2010
I am running 5.4 64 bit I am trying to connect via ssh on a laptop running Ubuntu. I receiving this error. Cannot display locations "sftp://10.66.77.201" Host key verification failed I searched around the web and some say that I should have a .ssh folder but I don't see one under the home folder. I re-installed ssh but I am still having problems.
View 2 Replies
View Related
Mar 29, 2010
I get the following prompt everytime I try to connect a server using SSH.
I type "yes", but is there a way to aovid this?
The authenticity of host '111.222.333.444 (111.222.333.444)' can't be established.
RSA key fingerprint is f3:cf:58:ae:71:0b:c8:04:6f:34:a3:b2:e4:1e:0c:8b.
Are you sure you want to continue connecting (yes/no)?
View 3 Replies
View Related
Apr 1, 2011
I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):
Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!
Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).
View 9 Replies
View Related
Aug 6, 2010
I am having an issue with HTTPS certification using curl. My curl is configured with OpenSSL. If the certification verification is failed I dont want to terminate the operation, instead I want to continue by just putting a log message. For this I have used OpenSSL SSL_CTX_set_verify() function to set my static C callback function. During HTTPS transaction, my callback is also getting called with first parameter 0 or 1 (depending upon of the certificate verification is success or failure). But even if my certification verification is failure, I want to continue. So I have hard coded to return value as 1 always from my callback function. But still I see the certification error and I don't get the page.
View 1 Replies
View Related
Mar 10, 2011
why does a machine try to resolve host when I issue 'sudo -i' or some other command prefixed with sudo.What is happening in the background?
View 11 Replies
View Related
May 17, 2011
I recently reinstalled my workstation from OpenSuse 11.2 to 11.4. After the installation, I found that I could not run zypper anymore. A few things to note first.
- OpenSuse 11.4 x64 - behind corporate firewall (which worked fine with zypper as long as a proxy was configured with previous versions
- used that ZYPP_ARIA=0 variable previously to help). - proxies configured in /etc/sysconfig/proxy. - all other network utilities I normally use (browser, ssh) all work fine. - I have removed all repositories and added them again several times. I have also done "zypper clean" several times not that I would expect that to be better than removing and re-adding the repositories. When I attempt to run "zypper ref" or "zypper in foo" I get the following:
[code]...
If I manually use wget to grab the package and either run it directly or insert it into the /var/cache/zypp tree (replacing the metalink version zypper complains about) it always works and gives me the right file.....
View 1 Replies
View Related
Dec 9, 2008
I got the below copied error while the openSUSE Updater wanted to make 2 security updates today.
[code]...
What should be the correct URL. My system has taken the URL from the YAST/Software/Add-On-Product/Community Repository and now it looks like it is not valid anylonger.
View 9 Replies
View Related
Aug 24, 2011
I'm trying to install an Ubuntu cloud on my home network - I've been following this guide. When I arrived at STEP 6: Install an image from the store PART 3: Click on the Store tab I get the following error message on the page: Error 60: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none
View 1 Replies
View Related
May 24, 2010
LDAP server failed to start.. Please check error log for problems.
View 2 Replies
View Related
Jan 22, 2011
I have a Dell Precision 330 with (the latest) A09 BIOS and 1 TB SATA hard drive. There is a SATA-IDE converter between the SATA HD and the ATA133 cable. The OS was Window XP Professional SP3.
When adding RH Enterprise Linux 6 onto the computer, I created two additional partitions, one 400 GB for Linux's storage and a 10 GB swap space. I chose Window XP as the default OS.
After the installation, when the system started up, I can hit a key to have two optional OS: Window XP and Linux. If I chose Linux, the system would boot up. If I chose Window XP, the boot failed with a message that windowssystem32configsystem was missing or corrupted. I read some articles that the problem can be fixed in window's recovery console with fixboot. After entering the fixboot command and restarting the computer, Window XP still failed to boot with an error message that another file was missing.
I thought I might have made some mistakes in the installation procedure and it would be cleaner to reinstall both OS. So I tried to install Window XP Professional again. Unfortunately, after booting from Window XP CD and formating the MBR and copying the window XP files, the computer can not restart with the installed XP. Instead, the computer boot from Window XP's CD repeatedly. If I remove Window XP's CD, the computer simply can not boot at all.
I began to wonder whether RH's Enterprise Linux made some change on the MBR of the HD that Window XP can not format.
View 11 Replies
View Related
Apr 29, 2010
I'm having an issue where some of my machines hostnames are no longer able to be resolved after setting up a mythbuntu backend to allow netboot. Also it seems that which machines hostnames get resolved is not consistent. (ie sometimes one gets resolved and sometimes it doesn't) I suspect that it has something to do with the changes I made to "/etc/ltsp/dhcpd.conf" to get the netboot running.
I have a Verizon DSL modem/router as 192.168.1.1. Up until playing with the "/etc/ltsp/dhcpd.conf" I saw hostnames of all of my machines show up in its network map. Now, some of my machines still get network access but their hostnames are no longer resolved. What did I do wrong? Here is my dhcpd.conf file:
Code:
# Default LTSP dhcpd.conf config file.
authoritative;
subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.2 192.168.1.250;
[Code]...
View 4 Replies
View Related
Jan 26, 2011
I have a strange problem with using curl function in php on slackware machines. So far I tested this on 2 PCs. I din't test it on any other distributions, so I don't know if it's only slackware problem.
Problem is that I can't use php curl in normal way. It can be tested wit simple code:
Code:
$ch = curl_init("url");
$content = curl_exec($ch);
if (curl_error($ch)) {
echo(curl_error($ch) . "<br>");
}
echo($content);
When I'm opening this php script in browser I'm getting error message:
Code:
Couldn't resolve host 'google.lv'
but I can use curl command in terminal, also it works when I run this php script in terminal like:
Code:
php ./curl_test.php
So problem is not in curl or php itself, but in apache, because this happens only when this script is running in apache.
Searching google a lot, I got to conclusion that apache can't read /etc/resolve.conf file during startup. Strange thing is that it happens only when httpd starts during system startup, but if I'm stopping httpd and starting it again manually, it works as it should until I'll reboot my PC. Restarting httpd also do not work, I need to do start -> stop.
I think that apache reads /etc/resolve.conf only when it starting up and as I have DHCP, maybe network is still not ready at the moment of httpd startup.
I didn't try to configure php as php-cgi instead of apache module, I think then it would work normally because each php script would be separate process and it would read dns information each time, so the same like starting php script in terminal with command:
Code:
php ./curl_test.php
I think there are some ways to workaround it, e.g. delay somehow start of httpd during system startup, or something like that, but I want to find reason of this problem and make it work without any workaround.
View 1 Replies
View Related
Mar 29, 2011
I've just installed Debian Squeeze from a live CD. When I open a web browser (be it iceweasel or epiphany) and try to go to google.com, it tells me it can't resolve the host name. [Edit: They do, however, allow me to go anywhere on debian.org, minus the search feature] I also get the same error when I try to go to my website running on a local server. However, when I type the server's IP address (192.168.0.10), it goes to the website fine. Basically, any program I run that needs to resolve a host name returns an error, with the exception of the host command:
I've tried changing my DNS server IP from 192.168.0.1 (my router, configured to provide DNS) to 192.168.1.254 (my internet modem, also configured to provide DNS). That didn't help any. Then I changed my DNS server IP to the same one used by the modem, and now everything works.
I've tried googling my way out of the issue, and I've found where someone had the same issue as I've got and fixed it by adding "blacklist ipv6" to their /etc/modprobe.d/blacklist.conf file, but that didn't work for me.
So, recap: Why does resolving domain names fail for certain applications (except the "host" program) when the DNS server IP is that of my router or modem (which works fine for all of my other computers), but suddenly works when I point the computer straight to my ISP's DNS servers, and how can I permanently fix the problem?
View 4 Replies
View Related
Dec 19, 2009
i get the following error when i try to install autoten: root@Tex dan]# rpm -Uvh [URL]... curl: (6) Couldn't resolve host 'dnmouse.org'
error: skipping [URL]... - transfer failed from reading other posts, it sounds like a dns error, but i don't know what to do to fix it.
View 14 Replies
View Related
Sep 3, 2011
It's been a while since I've use linux (specifically suse). But my wife and I are expecting our first child and our office/second bedroom is now being converted into the baby room. I built the computer that is currently in there and it is a really nice one that I do not want to get rid of. Two 500GB Sata2 drives and 8Gigs of RAM (not to mention my quad-core Phenom AMD processor and sweet asus motherboard) -- I just can't get rid of it. So what I planned to do was turn it into a small home server. I did some research and kept coming back to using opensuse as the server. I read this article The Perfect Server - OpenSUSE 11.4 x86_64 [ISPConfig 2] | HowtoForge - Linux Howtos and Tutorials and it seemed to have just about everything I'd like to do (maybe some extras that I don't really need, but might in the future). Everything was going fine until I got to a certain point. The install went fine, and I was starting to customize some of the settings for my own home setup. Now, the problem...
I've gotten to page 3 of the tutorial The Perfect Server - OpenSUSE 11.4 x86_64 [ISPConfig 2] - Page 3 | HowtoForge - Linux Howtos and Tutorials
and I am installing packages through yast2, and all the packages installed fine except for 'compat-readline4'. I think this is a form of command line editor or something to do with that. I am sure I am going to need it to finish the server set up, but I can't get it installed anywhere. I've tried to install it by pointing directly to the mirror found at rpm.pbone.net and still I get nowhere.
Yast2 auto refresh seems to fail everytime I run it. Even though I installed all the other packages, I get an error message that says it can't get the medium. When I look at the details of the error it says it can't resolve the host for downloads.opensuse.org.
View 9 Replies
View Related
May 25, 2010
I just built out an Ubuntu Server 10.04.
My problem is setting the hostname. I cloned the machine, then normally on the clone, I would change the /etc/hostname and /etc/hosts file.
However, when I do this, upon restart, I get the message, "init hostname main process (some process number) terminated with status 1"Then, when the machine finally boots, the hostname is set to (none). Literally has braces like: user@(none):
I've tried: sudo hostname machine_name but it says can't resolve hostname (none).
I've Google'd around a lot but can't get it. It may have something to do with 10.04? I have been using 9.04, 9.10 with no problems.
eric@(none):~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
code....
View 9 Replies
View Related
Aug 11, 2010
i am having a problem in the terminal window. When i try to do various operations i get the following message before the operation starts.
sudo: unable to resolve host Tims-Laptop
View 6 Replies
View Related
Jul 17, 2010
when tring to install (AssaultCube, UrbanTerror) i get this: unable to resolve host address `dls.urt.voxel.net'
View 2 Replies
View Related
Nov 26, 2010
When I try to launch something from terminal, it shows this error.
gksudo gedit /etc/hosts
Quote:
127.0.0.1localhost
127.0.1.1matt-laptop
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
My computer always had this name and I never had concerns related to his name. So, what's wrong now?
View 8 Replies
View Related
Mar 10, 2010
I'm trying to troubleshoot some strange networking problems. The pattern seems to be that only newer distributions are affected. CentOS 5.4 and Ubuntu 8.04 work fine out-of-the-box. But Arch, Sidux, AntiX, Fedora, etc. show the same pattern of errors.Certain websites cannot be found unless I disable ipv6 in Firefox. And certain addresses cannot be resolved using various terminal commands (wget, apt-get, yum, etc.). What I would ideally like is a permanent solution, perhaps changing some settings on my router, so that I don't have to deal with this each time I test-drive a new distro. I have a hunch the issue has something to do with my DSL provider (Fairpoint) filing for bankruptcy.
One more piece of information that may or may not be relevant: I recently switched a website from one hosting company to another. I noticed there was a delay of several days where I saw the old version at the old host, but viewing the site at a friend's house or the coffee shop showed the new site on the new host. This leads me to suspect DNS issues perhaps, but this is not an area of expertise.
View 3 Replies
View Related
May 21, 2010
I am having a problem with Ubuntu 10.04. I was setting up network sharing with Samba. Set up went fine, then I decided to change the hostname.
Following instructions I found on the web, I edited etc/samba/samba.conf to reflect my desired hostname.
Now I have to use superuser to run synaptic or update center. I don't know what else I have "broken".
I would like to change my hostname, if I did it incorrectly for 10.04 please enlighten me.
View 2 Replies
View Related
Nov 4, 2010
Whenever I try to use the sudo command in the terminal I get the message unable to resolve host, then my computer name. Here's some command line output with some files which I think may be causing the problem. I have Operating Systems homework and need sudo
steve@steve-laptop:~$ sudo gedit /etc/resolv.conf
sudo: unable to resolve host steve-laptop
steve@steve-laptop:~$ cat /etc/resolv.conf
# Generated by NetworkManager
domain domain_not_set.invalid
search domain_not_set.invalid
nameserver 68.237.161.12
[Code].....
View 1 Replies
View Related
Jan 18, 2011
I have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.
[code]...
I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.
View 9 Replies
View Related
May 19, 2010
I'm using "Xubuntu" on a bit dell laptop, i have installed everything i see to do with Java in the software center and in the synaptic package manager and no Java sites work sill i have downloaded every package from adobe for Linux and after extracting them to my desktop and clicking on them it dose nothing Ive tried a few lines in the terminal but always have a destination error..
View 7 Replies
View Related
Mar 24, 2010
I have a 64 bit Karmic system with two drives. One is mounted as / and the other is mounted as /home. I just put the video card from my system into my son's system and got a new video card. (Don't see how it's related but still...)Now I am getting the following message when I turn on the system. code...
View 1 Replies
View Related
