Recently, after upgrading from FC11 to FC14 I checked my bluray burner (relevant lines from dmesg):
[code]...
got empty output, which means: all files are identical. I can set the post-write verification to "off" but I prefer it "on" when backing up important data. Does this error familiar? how to solve it or, at least, where to look for messages that might have a hint as to what's wrong
I have a machine with a fresh install of fc14. When I first created the machine about 3 weeks ago I could attache my iPhone 3GS and FC14 (gnome) would detect it and I could use shotwell and rhythmbox fine. Ya!
Now as of about 1.5 weeks ago, when I plug in my phone I get a pop up with : Unable to mount Brian's iPhone DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) dmesg doesn't show any errors, just that an iPhone was attached. Is this just me or are others seeing this? Any ideas as to what might be wrong?
seems im getting this error when i update.I searched the forums for similar errors but i found no solution that worked for me. this is the error>>>>>
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: [URL]: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <ftpmaster@ubuntu.com>
W: Failed to fetch [URL]
W: Some index files failed to download, they have been ignored, or old ones used instead
How do i get the correct key?
Every time I try to update Ubuntu via the Update manager, I get the following error messages.
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: [URL] stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A2019EA84E7532C8
W: Failed to fetch [URL]
W: Some index files failed to download, they have been ignored, or old ones used instead.
I already tried sudo apt-get update:
Code:
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: [URL] stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A2019EA84E7532C8
W: Failed to fetch [URL]
W: Some index files failed to download, they have been ignored, or old ones used instead.
sudo apt-get upgrade
Code:
Err [URL] opera 11.00.1176
404 Not Found
Failed to fetch [URL] 404 Not Found
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
and sudo apt-get upgrade --fix-missing
Code:
Err [URL] opera 11.00.1176
404 Not Found
Failed to fetch [URL] 404 Not Found
I also tried changing my software sources server from United States to Main Server, but it didn't make any difference.
when i was updating my ubuntu 10.04 using update manager i got the error"W.A error occurred during the signature verification.the post is not updated and teh previous index files are used .GPG error: http://deb.playonlinux.com lucid release.
View 2 Replies View RelatedIm trying to do a remote execution of scripts through SSH in PHP. What im doing:
-Use PHP in conjunction with nagios' check_by_ssh script to execute the script.
-I used
[code]...
-It gives me a 'Host key verification failed' error even though i enabled it to ssh from my server to server01 without password. My Qn: How do i get it to work?
I have moved from MS directX to OpenGL on Linux Debian. My computer is running Jessie version with Gimp. I am trying to use several of the gl 4.0 functions but getting compiler error. I check for OpenGL version and appears to be version 1.5 .... How can I verify the correct openGL version and how can I upgrade to a moder version of at least 4.0?
View 4 Replies View RelatedI got the below copied error while the openSUSE Updater wanted to make 2 security updates today.
[code]...
What should be the correct URL. My system has taken the URL from the YAST/Software/Add-On-Product/Community Repository and now it looks like it is not valid anylonger.
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: url karmic Release: The following signatures were invalid: NODATA 1 NODATA 2
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: url karmic-updates Release: The following signatures were invalid: NODATA 1 NODATA 2
W: GPG error: url karmic-backports Release: The following signatures were invalid: NODATA 1 NODATA 2
W: Failed to fetch cdrom://Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)/dists/karmic/main/binary-i386/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
W: Failed to fetch cdrom://Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)/dists/karmic/restricted/binary-i386/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
W: Failed to fetch url...karmic/Release
W: Failed to fetch url/ubuntu/...pdates/Release
W: Failed to fetch url/ubuntu/...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
code....
W: Some index files failed to download, they have been ignored, or old ones used instead.
I've had a problem doing updates to Ubuntu 9.10 Karmic for months. I'd like to upgrade, but figure I should solve the update issue first. The output of "apt-get update" is:
[Code]....
after upgrading to FC14, i'm getting this when I run emacs file.sh:
GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)
Fatal error (6)Aborted (core dumped) This only happen when i'm logged in as root, on the Terminal session. As a regular user, or launching emacs from task bar icon don't happen.
when i want run "ltsp-build-client" command i get this error: ERROR: fc14 is unsupported i want know there is any plan for ltsp 5.2 support in fedora 14 and how i can solve this problem for use ltsp in fedora 14.
View 2 Replies View RelatedI have work through fedora project guides and got these messages beneath.
[code]...
I upgrade from FC12 to FC14 on Monday last. Yesterday, I noticed that CUPS wasn't running, so I looked at services and started it manually. The services appeared to be set to start CUPS automatically, but today again it wasn't running. Looking at messages, I now have the following 'errors' that appear to be disabling CUPS due to some form of load dependency.
Message log extract:
[code]....
Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) I'd tried
Code:
# akmods --force
5.100.82.38-1-for-2.6.38.6-27.fc15.i686.PAE.failed.log is attached. How to build akmods?
Having trouble with ffmpeg install using fc14. [solved]#yum install ffmpeg . . . gives the following error:
Finished Dependency Resolution Error: Package: libavcodec52-0.6.1-38_git20110115.fc14.i686 (atrpms) Requires: libva-0.31.1.1.so.1
it's the installation media or the ISO is broken because i have reburned / redownloaded the fedora14 multiple times with the same result. I even tried burning the disc on a different computer just to make sure the burner is still working. This is the error i am getting when the "Starting installation Process" dialog displayed.
"The file upstart-sysvint.0.65.9.fc14.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source" I remember fedora 13 and below i have to use nousb command or something similar to get fedora installed properly but not for fedora 14. It just pops up with the message above.
I'm trying to install an Ubuntu cloud on my home network - I've been following this guide. When I arrived at STEP 6: Install an image from the store PART 3: Click on the Store tab I get the following error message on the page: Error 60: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none
View 1 Replies View Relatedi'am running:
Distributor ID: Ubuntu
Description: Ubuntu 9.10
Release: 9.10
Codename: karmic
kernel: 2.6.31-16-generic
pc and laptop are connected via switch. hard wired and static ip on ubuntu side is a wlan running connected to the internet. on my laptop: i am running:
Distributor ID: SuSE
Description: SuSE Linux 9.0 (i586)
Release: 9.0
Codename: n/a
kernel: 2.4.21-99-default ( year 2004 )
on unbuntu side i use: SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2. on suse side i use: SSH-1.99-OpenSSH_3.7.1p2. both sides are using: Protocol 2 and ServerKeyBits 768 and now my problem. i can connect from ubuntu to suse using ssh without a problem. when i try to connect from suse to ubuntu i always get: Host key verification failed and nothing else. no hint about middle man attack or so. no change to answer -> save the new key. the permissions of ~/ssh my both sides are id_rsa.pubcorrect i think ( drwx------) and the permissions of : authorized_key, id_rsa, known_hosts are all - -rw------- 1 ( not linked or so ).
I've been plagued with this problem for weeks. It finishes writing the DVD but after it ejects and reloads, it doesn't go through the verification process. Yet I never fail to hand-verify the DVD using 'cmp'.
In this case today I created a multi-directory DVD and had an .iso image made first. It's still sitting there in /tmp (with a backup copied to /opt so I can close out k3b). How would I verify the .iso against what's on the DVD? How does k3b do it? Hopefully this means a command line solution.
BTW what are the command line apps for burning and verifying a DVD? I'm not so hot on graphical apps for this task anymore.
i have Ubuntu10.10 (kernel-2.6.35-22-generic) installed. struct stat StatBuff;
[Code]...
I have mounted a windows share folder on /mnt. When i gave any directory within /mnt/ to stat function it fails with errorno 75. perror shows "Value too large for defined data type". Example 1 is fail but Example 2 works fine.
I get the following prompt everytime I try to connect a server using SSH.
I type "yes", but is there a way to aovid this?
The authenticity of host '111.222.333.444 (111.222.333.444)' can't be established.
RSA key fingerprint is f3:cf:58:ae:71:0b:c8:04:6f:34:a3:b2:e4:1e:0c:8b.
Are you sure you want to continue connecting (yes/no)?
I've searched and searched and my googlefu has failed me. code...
View 9 Replies View RelatedI just installed openssh-server, and all tutorials say it should work out of the box. But it doesn't, it dies with "Host key verification failed."
Here is the log:
Code:
nick@rilmir:~$ ssh -vv localhost
OpenSSH_5.1p1 Debian-5ubuntu1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[Code].....
I know that there are multiple threads with problems like this, but still i didn't found my answer.
The situation is like this:
I have a local server and a remote server, i did a ssh key swap so i can log on to the remote server with no problems (automatically logging on, no need to enter pass or login).
I've made a script that copies (with SCP) a file FROM the REMOTE server TO the LOCAL server (NOT FROM the LOCAL server to the REMOTE server !!!!), and then i get an error like code...
I have Asterisk 1.2 running on a SPARC Solaris machine with a number of extensions, queues and so on configured and working well. Recently I wanted to create an IVR including a PIN verification system, enabling a user to call the number, hear a message (welcome, enter your PIN, etc), enter his PIN in the DISA application and hear another message afterwards without any further input. I can call the extension (IVR), hear the message and input my PIN, though after that I'm left with a dialtone and Asterisk waiting for me to enter a number(extension to call). If I do this, it forwards me correctly, though I'd prefer an intermediate step including a message for the user.
User calls number.
User is greeted with 'Enter your PIN,etc'.
User enters PIN code, followed by a '#'.
User hears another message 'Thank you. Now you can...etc'.
User then provides further input, etc.
Here's an excerpt from my extensions.conf:
Code:
; Lights control
exten => 9994,1,Answer
exten => 9994,2,Playback(welcome)
exten => 9994,3,Playback(beep)
[code]....
There is a mail server formed by debian4 + postfix 2.3.8 . Some messages aren't received or take too loong to be received. Here is a example or error in mail.log:
Code:
Mar 24 10:30:42 myserver postfix/smtpd[7467]: NOQUEUE: reject: RCPT from n7b.bullet.mail.re1.yahoo.com[69.147.103.218]: 450 4.1.7 <sentto-733423426-11-134235567-myname=mydomain.com@returns.groups.yahoo.com>: Sender address rejected: unverified address: Address verification in progress; from=<sentto-733423426-11-134235567-myname=mydomain.com@returns.groups.yahoo.com> to=<myname@mydomain.com> proto=SMTP helo=<n7b.bullet.mail.re1.yahoo.com>
[Code]...
I wrote a code for login verification..I got output with GET. But I need output with POST since it is more secure. Any error in my code.
javascript code:
var xml;
function verifyusernamepasswd(pass)
{ //pass is password that will be passed as parameter
xml=new XMLHttpRequest();
var url="http://localhost/loginvalidate.php";
var para="q="+username+"&p="+pass;//username is global
xml.setRequestHeader("Content-type", "application/x-www-form-urlencoded");
xml.setRequestHeader("Content-length", para.length);
xml.setRequestHeader("Connection", "close");
xml.open("POST",url,true);
xml.onreadystatechange=statechanged1;
xml.send(para);
} .....
The verification does not return anything, cos my alert is not displayed at all.
I have Slack 64 bit installed on my desktop, sshd is running. From my netbook running Ubuntu I can not connect through ssh, I always get 'Host key verification failed' message. I have tried a lot of things, I got to a point where I could not ssh either way. So today I removed and re-installed Openssh on both systems. I made sure I was using the new ssh_config and sshd_config files on both systems. Right now I can ssh from the desktop ( Slack ) to Ubuntu ( netbook ) but not the other way around. I do not get a known_hosts file created on Slack, I do get one on Ubuntu. I don't understand why Openssh server on Slack is not accessible, and why the known_hosts file is not getting created.
[code]...
is what I have installed. Most of the suggestions I have found suggest deleting the entry for the remote host. Problem is it never gets created. How do I go about fixing this? This is a link to the last howto I followed, after the re-install of Openssh. [URL]...
I just bought a recently-released Toshiba CB35-B3340 Chromebook, and I'm trying to install Debian on it (I want to wipe out CrOS and give all harddrive space to Debian). However, I'm having problems booting from USB. When I press Ctrl+U at boot, the screen flashes back, the computer beeps, and I'm brought back to the same "OS Verification is Off" screen. If I press Ctrl+L to get to what is supposed to be the SeaBios screen, the computer beeps twice and nothing else happens.
I followed steps 1-4 and 8 of this guide: [URL] .... and I just downloaded the amd64 netinstall image from the Debian website and dd'd it to the USB stick.
I've tried two different USB sticks and successfully booted another computer from them, but neither work on the Chromebook. I've also tried both USB ports, since I've heard some Chromebooks can only boot from one, but to no avail.
I have looked into things like ChrUbuntu and crouton, but they look like they just set up a dual-boot or chroot system. I want neither of these, my goal being to have a normal Linux laptop at the end.