okay, I've gotten a bit overzealous and now my file system is getting a bit full. I found some candidates that may need to move out, just, are they still needed elsewhere?I'd use Quote:pacman -Sr simgear...but what is that stuff is needed elsewhere?
View 2 RepliesI would like to create a full systembackup to a ISO/IMG-file. I've been searching and found mondorescue.org, but something is wrong with package for debian 6.
View 14 Replies View RelatedI can't login due to my file-system being full. I found the main area with the large usage. Var/log is taking 99.5% of my var folder. On a full file-system scan Var/log is taking up 85% of disk use. File-system capacity is 36 gig. Temp is cleared after each boot.
What can I do to clean up any unnecessary files. I can only boot in safe mode and have limited navigation skills. To get scan results I booted a live-disc.
Opensuse 11.2 gnome 64 bit.
formatted a 64g usb memory stick with gparted use fat32 file system and recognized full 64gig drive plug in and is on /media/usb this is what i got on my fstab UUID=24AF-1E67 /media/The-Hive defaults,nosuid,nodev,locale=en_US.UTF-8 0 0 i want all user access to this memory stick to write delete and execute. am I going nuts i cant make it to do that..
View 2 Replies View RelatedI'm new here, hope to not be obnoxious... I've been using linux systems for a long time (work in science), but have only minimal experience as administrator. And today, following insomnia, I found myself typing (as root):
Code: yum remove `package-cleanup --leaves` I am not usually quite so stupid... (I had intended to upgrade from fedora 12 to 15) But now I can't login at all (either as the normal user or root), though the machine seems to boot properly. Currently I'm using a live distro on a usb key. Can this be undone?
If you really want to learn C/C++, get set up on a Linux box with a full gcc dev system. I fixed up an old P4 Machine with 2gig ram and 80gig HD to install Linux on. Don't know anything about Linux yet but installing several distros for evaluation, but a thought occured to me. Is there a particular distro that has this "full gcc dev system" in the initial install or is this something that I will have to install after the OS is up and running on the machine? Is one distro better suited for programming than another?
View 2 Replies View RelatedI bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
My Redhat Enterprise Linux 4 with 6x partitions (/, /boot,/home, /usr, /var, /tmp) of 6.0 GB IDE Hardisk was working quite fine. I decided to create LVM on /home and /var partitions but due to some errors occured and I delete the /home partitions. That's why partition table altered. I then delete 4,5,and 6th partitions (/home, /var, /tmp) partitions and now try to create one by one but following error is coming:-
[Code]....
The Super block could not be read or do not describe a clear ext2 file system. E2fsck b 8193 <device> I have tried following commands,but could not successful:- e2fsck -p /dev/hda7 (where hda7 was created but afterthat it was deleted) e2fsck -a /dev/hda7
I come from a PCLinuxOS tradition (about two years), and a great full backup program was mklivecd, where I would use a GUI to make a bootable livecd/dvd with all my system which was handy in case something went wrong. Every week or so I would create a DVD ready for emergencies. After looking at the options in Debian (using Squeeze, and very happy with it for a few months now), I'm wondering if there is something similar. Remastersys, it seems, doesn't work with GRUB2 (only with GRUB-legacy), and Partimage makes images, not bootable CDs/DVDs. What is your full-backup/bootable system strategy, something, if possible, as easy/straightforward as mklivecd?
View 8 Replies View RelatedI just moved to Ubuntu. I have been configuring and installing applications so I can finally call this OS my new home. Still not there yet but have been doing alot of work on it. I was originally with Windows XP. I am a back up freak. I backed up my documents, firefox bookmarks and other important information every 5 mins to another drive when I was using Windows XP. Also, every 24 hours I would have this program Acronis True Image back up the whole Windows partitiong (Drive C). This was so if my hard disk died, I know I could restore the partition from an image and only lose the last 24 hours of configurations/modifications made to the OS.
And for personal data such as bookmarks, messenger chat logs, documents, pictures etc, I would only lose the last 5 minutes of this data, since it was always backed up every 5mins. It was very fast too.
So my question is: 1. Whats the best application to save a whole image of the Ubuntu partition so that it can be restored with minimal (hopefully only 24 hours) of data loss?
2. Whats the best application to save selected directories and have it configured such that those directories are backed up periodically?
3. Whats the best application to do Number 2 (above question) with versioning? That is, if it is backing up periodically, it will save file changes, so we can revert back to an older version of a file.
I have tried SimpleBackUp suggested by the Ubuntu site and did not like it at all. It just said it would run in the background and you couldnt even cancel it or monitor it!
What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
View 1 Replies View RelatedI am setting up a mail server on debian. Once it's done, I'd like to have an indentical server on another machine, where debian will also be installed. The solution has to be hardware agnostic, so source machine is different than destination machine. I was reading on some wiki page that one can simply copy the root filesystem via rsync to the computer that he'd like to install the system on, then chroot to it and test if everything works. I'm guessing I'd have to change a couple things before, like :
- The network config
- The /etc/fstab file (disks and partitions may be different)
This article is about using rsync to transfer a copy of your "/" tree, excluding a few select folders. This approach is considered to be better than disk cloning with dd since it allows for a different size, partition table and filesystem to be used, and better than copying with cp -a as well, because it allows greater control over file permissions, attributes, Access Control Lists (ACLs) and extended attributes. [1]
I have automated backups running on my ubuntu box using rsnapshot (rsync) basically following this tutorial. My concern is how to restore if everything is lost. Since it does not seem that I can backup the entire drive and that I have to choose individual folders and some like proc/ cause problems.
Currently in my rsnapshot.conf I have (see below). Is there a way to just clone the entire drive? Or should I not do this? Questions:
1, Can I backup in a way such that it is a clone of the drive so that it can be swapped with the current drive?
2, If not yes to clone, If I had a total drive failure would I install a basic ubuntu and then replace all the files with the backups?
3, Anything I might not know about that I should.
[Code]...
I want to be able to recover from a disaster by simply inserting a CD of my entire system, boot from it, and reinstall my system back to the way it was before the disaster. After much research here, I feel the need to ask this question directlybut as a new user, I find it somewhat difficult locating information.
I have seen references to all sorts of backup software. I am trying to use Simple ackup.Each time I run this utility, it gives me a process ID and then apparently vanishes. I don't see the process running in System Monitoror see anything recognizable in var/backups.Perhaps, being as new to Linux as I am, I am simply overlooking something. I must say though, that these are the friendliest user groups I have ever seen. It amazes me that so many people are so willing to post long, complicated solutions to someones problem
Well I've decided to move all my data from one VPS to another, and Iwanted to know if there was a way from within Ubuntu to make a full system image backup,ch I can then just transfer to the new Ubuntu VPS, and restore it there ..Unfortunately my VPS control does not have any working backup option right now, so I can only make the backup manually from within Ubuntu, if there is a way to do it
View 9 Replies View RelatedIs there any Full form of LINUX ?
View 4 Replies View RelatedI wonder if I can backup files from an ext partition to a ntfs partition and keeping all kind of metadata and file infos?!
With other words:
Can I backup a full linux system from a ext file system to a external ntfs partitioned disk using rsync -a (keeping all file permissions)?
Is something getting lost of a file (like permissions or anything... flags...) when copied / rsynced from ext to ntfs?
The thing is, that when I restore the stuff back from ntfs to ext, can I still use my system properly?
And can I backup files like photos from ext to ntfs without loosing any meta data?
Or asked more in general: What is the difference of a file on a ext partition compared to the same file on a ntfs partition?
i have a RAM of 1 Gb & swap of 1Gb with fedora11 installed, initially in RAM programme memory uses around 300 Mb & cache uses 600-700 Mb , but after some time it starts using swap memory though my programme memory is still around 300 mb, it keeps on increasing swap memory as a result my system keeps on slowing down & finally when swap memory is 100% system almost stops responding but programme memory is still around 300mb.
View 7 Replies View RelatedI am using OpenSuse 11.2 (64 bits) with KDE 4.3.1. My hard disk partition contains 3 areas : / + /home + swap. Frequently the / area is filling with, I suppose, temporary files until it is full (15 Go) and that in a very short time, typically about 5 mn. Then, these files are cleaned by the system, when disk space is needed I suppose. The point is that during this time, the system goes slower and slower until the "cleaning". That seems to occur only when Firefox (3.5.6) is running so I suppose that these files are temporary internet files.
View 9 Replies View RelatedI have a problem that I can't login to SUSE in graphical mode. I get to the login prompt; enter my username and password; SUSE starts to do the login but then crashes back to the login prompt. Looking in /var/log/messages doesn't tell me anything useful. However, I noticed that my SUSE system partition is full (at 20 GB). So I think this is the culprit that is stopping my login.
Unfortunately, I can't extend my system partition as it is ext4 (SUSE default) but parted (from SUSE 11.2 live cd) complains that it can't do anything with ext4.
I'm using
OpenSUSE11.2 x86_64
KDE 4.3.5
Linux 2.6.31.14-0.1-desktop
I would like to make a bootable Ubuntu system on a USB stick from a full install, so I can update the packages/kernel etc, and I would also like to have the ability to Install ubuntu from the USB stick onto other computers. What package allows you to run the installer that is found on the LiveCD?
Also, is it possible to have a Ubuntu installer that uses updated packages rather than the LiveCD so they are current when installed rather than the release packages to save on the download/updating time?
Checking the process table for the running sendmail, I would like to know the full path to the sendmail binary a la the ps -ef on a Sun or other servers. How do I get ps to give me the actual path, or should I use a different tool on my Linux servers?
View 2 Replies View RelatedI'm a student and I'm already able to access the university's Linux machines from Windows using a combination of Putty and Xwindows with Cygwin. The computers I'm ssh-ing into have Ubuntu on them. Is there a way to remote access them to get the entire desktop? Like having a virtual OS window, but be using a remotely accessed computer. Is there anyway to do this or should I just settle with the X11 forwarding through Putty? Thanks!
EDIT - Just wanted to mention that these are public lab computers so I can't just have myself logged in with a remote desktop set up and waiting. I'd need something that allows me to log in remotely as well on the server without needing to to change what's on the computer there.
Have just assembled a new computer and thought I would install the 64 bit version of openSUSE 11.2 in a "Windows free zone". After a hiccup or two I have managed to get a system of sorts running but on trying to copy files from my old computer(via a memory stick) it tells me that Vfat is an unknown file system.On my old computer I am running 32 bit openSUSE 11.2 as a dual boot system with Windows XP and have no problems moving files between the two different file systems.Is it possible to get a 64 bit file system to read 32 bit file system drives and if so how do I do it?
View 7 Replies View RelatedIs there a way to get the full path of a file in C? I have a method that accepts a file name as an argument and is supposed to read the content of the file. The file name might include "../" so this might lead to accessing files outside of the current directory. I tried to use fstat but I could not figure out how to get the full path.
[code]...
I used to know how to access and rw other linux drives and do the fstab magic. For some reason I've lost my touch. I just want the drive to automount and have full access. I don't need a beginners tutorial on mkdir and fdisk -l. Is there a foolproof way to get my drives to do what I want? I dual boot fedora and ubuntu, but have the same issues on both.
View 1 Replies View RelatedI have an XP laptop, currently running very low on HDD space and RAM capacity, waiting to be replaced. Very slow indeed. It recently had problems booting up, and now takes about 20 minutes to get fully started. Is it safe/advisable to run the demo version of Ubuntu from the LiveCD? I really can't afford to trash or crash my computer, it's got lots of important data on it etc.
View 4 Replies View RelatedThis question has been raised several times I am sure but...
I would like to create a FULL recovery CD/DVD of my system with a boot restore...
Any recommended for Ubuntu 10LTE Server.
I'm trying to install a luks enabled grub for full system encryption. What modules are required by grub to load a normal ubuntu linux system and what is the type to use?
View 2 Replies View RelatedI'm using the default GNOME file manager. But as a user I don't have any privileges to move files to/from the user folders to the system. I elevated my user to admin privileges, but this has no effect; I can't do any file management in the system area.
I can use the 'root terminal', but it would be much easier to use a GUI file manager--even drag 'n drop.How do I get the file manager to open up? I guessed one way to do this is to log in as 'Root' instead of user. But login won't allow an 'other' login when I try to use 'root' as a username. Is this the wrong approach? Dave