Software :: Firewall Script Interferring With Boot Process?
May 14, 2010
i got a script from the internet to setp a centos as an gateway server for my lan. after installing the script, every thing worked fine. and in fact it does work well but what beats me is that when ever i restart the machine, upon booting and service startup, the systems hangs on starting up networking service. since i had not experience this ever before using this script, am confused as to if the script could be the cause. below is the exact script.my distro is centos 4.6
#!/bin/bash
# Author: Muhammad Kamran Azeem ( kamran@wbitt.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it )
[code]....
View 12 Replies
ADVERTISEMENT
Aug 23, 2015
I've been trying to make the switch from windows to debian (mate), but I am utterly lost trying to find a replacement for my firewall (Outpost). I have become dependent on features like:
- per application outgoing/incoming TCP/UDP rules
- per application outgoing/incoming IP rules
- per application outgoing/incoming PORT rules
What i seek is a graphical firewall, (or Iptables-) GUI) that will popup a notification that a cirtain program wants to connect to the internet with a cirtain IP over a cirtain PORT and connectiontype.
It seems like FireFlier is what I want, but i was not able to get that running because it is most likely to old and no longer compatible:
(small update on FireFlier, Martin Maurer, the compiling error could be fixed by changing the order of lines 4 and 5 in server/backend.h which would then be
Code: Select all#include <netinet/in.h>
#include <linux/netfilter.h>
And although i'm still to clueless to get the rest working, [URL]....
Also from what I understand is that I should be able to achieve this with AppArmor or Selinux, but I was unable to do so. For the rest, all I could find where firewalls like Douane, that are just not powerfull enough [URL]...
View 9 Replies
View Related
Apr 29, 2011
Basically my problem can be neatly summed up as the problem described at both here and here. I can only presume it's a rather uncommon problem to do with a particular hardware setup since I can't find any widespread bug reports of it, but it is (on my system at least) highly replicable. I can reboot my system from Natty and it either one of two scenarios. It can reboot the system (as first asked) then reboot again in the middle of POST and splurge an error about interrupting POST at me (and keep giving me this error every reboot till I go into the bios and resave some settings).
Alternatively, it can get all the way into grub, where I can dual boot into Windows, windows will get some arbritary point in (usually the login screen give or take 10 seconds) and then reboot at random. It's not even a windows crash since I've disabled auto-reboot.I'm not sure what's causing it but I can only presume it's something at the kernel level, since I'm not sure anything else would have the kind of power needed to interfere with the system at an 'outside the OS' level. As such I wouldn't have any idea how to go about fixing it, but I can hope that someone here may be able to point me in the direction of potential settings I can change (probably BIOS I guess) that might aleviate the issue till a fix is found.
View 3 Replies
View Related
Jan 16, 2010
when i try to boot from the disk i burned, the screen show to lines of code, then pauses and never continues with any process.
View 1 Replies
View Related
May 13, 2011
I installed the ferm firewall with aptitude in the debian squeeze, the ferm init script is installed to the /etc/init.d and it's enabled in the /etc/default/ferm:
# configuration for /etc/init.d/ferm
# Enable the ferm init script? (i.e. run on bootup)
ENABLED=yes
View 3 Replies
View Related
Mar 25, 2011
I suspect this is an initial configuration bug. All firewall logs seem to be going to all
three files. That causes a lot of clutter in the log files, and makes it difficult to see whether there are any serious problems being logged.
View 9 Replies
View Related
May 18, 2010
I am learning to setup firewall in my home for that i have selected four system(sys1,sys2....sys4) for testing .I have configured sys2 to act as a firewall with two NIC. sys3 and sys4 are inside the firewall . sys1 is not connected to firewall for testing purpose.
the IP assignments are follows :
sys1 : ( fedora, not connected to firewall i am thinking, But i am not sure )
IP : 192.168.2.1 ,
gateway : blank
dns1 : blank
dns2 : blank
sys2 firewall ,IPTABLES )
code....
what happened is that sys1(not connected to firewall) can ssh to sys4(connected,inside firewall),since the rules are written not to ssh form sys1 to sys4..
then I came to know whatever the request I give, It directly goes as sys1 --> sys4. Not as sys1-----> sys2(firewall)---> sys4 .and the firewall is not filtering and processing anything for both inbound and outbound (i think it's my mistake some where). the requests are directly going inside without firewall.
View 3 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
May 27, 2011
I'm trying to build firewall on Debian with 'Firewall Builder'. But it won't let me compile and run unless one interface is set as management. There are two interfaces on my computer: 'eth0' and 'lo'
I don't want to be able to configure firewall remotely, so could I use 'lo' as 'management interface'?
View 1 Replies
View Related
May 9, 2011
Can we use iptables as firewall instead of Juniper firewall
View 2 Replies
View Related
Jun 15, 2009
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
View 3 Replies
View Related
Jun 5, 2010
I upgraded to 10.04 weeks ago and have been running it fine.Now when I start up my computer it gets to the GRUB loading stage (counts down to 0), then the monitor goes blank for a moment and then several thin scratchy lines about an inch wide in total appear across the top of the monitor and it just freezes there.The boot process just stops.I've had these lines appear ever since I upgraded, but they were always momentary and the boot process just continued. Where do I start in diagnosing and fixing this?
View 2 Replies
View Related
Sep 1, 2011
So I (being an idiot) screwed up my boot process. While tinkering around with random things I was reading here and there, trying to get my Burg and Plymouth resolutions to look normal, I think I tried something, not realizing that it was intended for intel graphics (I am running ati). During boot I get a "FATAL; Error inserting i915 (/lib/modules/2.6.38-10-generic/kernel/drivers/gou/drm/i915/i915.ko): No such device
View 2 Replies
View Related
Jul 25, 2010
Can u tell me, how does the linux boot process?
View 8 Replies
View Related
Oct 17, 2010
My system after installing Ubuntu 10.04 has an annoying 30 second pause during the boot process. It comes after BIOS checks and before the splash screen, the monitor is just black with a flashing cursor. The system has two IDE drives (/boot and /home) and a SCSI drive (/). There is a SCSI MO drive on it's own controller.
Partial lspci:
01:09.0 SCSI storage controller: Adaptec AIC-7892B U160/m (rev 02)
01:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 23)
I attached a clip from bootchart and a boot log file.
View 9 Replies
View Related
Nov 11, 2010
I've some file with .sh extensions that runs some softwares.Now,how do I stop running that filesI know we run the command ./start_tomcat.sh to start the apache.Is there any command to stop that file/process or is it just kill the process to stop the process
View 2 Replies
View Related
Jul 24, 2009
Everything seems to be fine and everything boots up in fedora 11 still; However, the recent updates to my system really hangs my boot time up and it takes a while for it to boot strangely... don't know what exactly could be going on really, but it's doing this for the current and previous kernel of F11. I'm on Fedora 11 32bit x86. My log file: [URL]
View 14 Replies
View Related
Nov 9, 2009
The boot process fails using; 2.6.30.9-96.fc11.x86_64. I am able to successfully boot by selecting 2.6.30.5-43.fc11.x86_64 from GRUB. The last few messages I receive when booting using 2.6.30.9-96.fc11.x86_64;
ADDRCONF (NETDEV_UP): eth0: link is not ready
Sky2 eth0 link is up at 100 mps, full duplex flow control rx
ADDRCONF (NETDEV_CHANGE):eth0: link becomes ready
audit (1257757711.701:20095): auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 op=remove role key=null list=2 res=0
audit (1257757711.701:20096): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
View 1 Replies
View Related
May 5, 2010
im looking to boot a PC104+ from a linux floppy...
a) what version should i use that would fit and boot on a floppy?
b) is there any place i can still easily find that version?
c) what is the process (if any) to make the disk bootable (like msdos boot format)
d) can this boot floppy then be installed on a local drive?
i know that seems like a lot but they all kind of go hand in hand from my experience using DOS in such a way. im still out there searching but kudos to anyone who can help.
View 1 Replies
View Related
Jun 5, 2010
I did a minimal install of Fedora 13 (i686), added X Window & LXDE groupinstalls, and xorg-x11-fonts-base, switched to level 5 in /etc/inittab.When rebooting, the First Process indeed starts, but any character seems to be replaced with squares. What am I missing ?
View 2 Replies
View Related
Apr 14, 2011
I have recently installed Suse 1.4_64 on my system. During the boot process I experience two delays of about 30 seconds, every time I boot up.
View 9 Replies
View Related
May 11, 2011
Using OpenSUSE 11.4 on a backup server. At boot, it needs to connect to the main server's NFS share. Watching the text scroll up the screen, it's obvious that the system waits for anything up to several minutes showing 'mounting NFS...'. Once it (eventually) passes that point, the rest of the boot procedure is as fast as expected.
If NFS is disabled at boot, normal boot times are restored. If the NFS client is restarted via 'rcnfs restart' once the system is up and running, it's instant. If NFS is disabled at boot and started manually afterwards, it start instantly. Once running, NFS behaves normally. The backup server has two ethernet ports, connected via a switch to the main server, which also has two ethernet ports. All ports are configured via DHCP from a router, with all addresses reserved on the router so that all important devices are kept at the same locations.
View 2 Replies
View Related
Feb 8, 2010
I have OpenSUSE 11.2. I removed bootchart and forgot to run mkinitrd. Now, right at the start of the boot process, I get boot/93-bootchart.sh: line 17: 462 Terminated stopinitrd 5
I Can't find any 93-bootchart.sh anywhere. Earlier I got an error message about non existing /sbin/bootchartd, but I just copied /bin/cat to /sbin/bootchartd using a GParted boot disk. I tried to use chroot with an OpenSUSE boot disk, but mkinitrd can't find the root device, which is there actually (/dev/sda5). How can I make my system boot again? now I managed to re-install the bootchart rpm, using OpenSUSE boot disk and chmod. The system starts again. But that annoying bootchart is still there. I will not try again to remove it. First I will try to figure out, how to disable it during the boot process.
View 1 Replies
View Related
Apr 19, 2010
I'm using CentOS 5.3. After booting up, where can I find the log file that contains if all services where successfully loaded or not? For example when computer boots you get a list of start services and they can be OK or FAILED. Is there a log file where this information is kept? I had a look in the following directory /var/log/ but not sure which one will contain the informaiton that I need.
View 2 Replies
View Related
Jan 2, 2010
I got a problem. At the day of New YEar, i got a virus, that my antivirus big time. When i started Windows, i instantly got BSoD. I managed to format my HDD, and now i wanna try to install Ubuntu. It has been working before, but after an update, I can't get further then the logo in the boot process. Now, I don't have any OS. Ubuntu & Kubuntu both just gives me the logo/loading screen, and then goes black..
windows 7 also just goies to "Starting windows"... Prretty annoying.
Think i got 3 GB RAM, 950gb HDD, and 2x 128 MB ATI X-Fire video.
View 2 Replies
View Related
Jan 5, 2010
I would like to customize my bootprocess on Karmic Koala.on <= jaunty i have been using the bootupmanager but on karmic it does not list all the processes and their state properly. so i think the internal changes within the karmic bootprocess have made bum inoperable. which is not that bad since karmic boots much faster but still i would like to make some changes to karmics boot.
View 1 Replies
View Related
Jun 6, 2010
Fighting against Grub2 boot troubles, i've seen on screen that the problems comes when detecting internal SATA devices.
But logs dont help about the scanning boot process, so i search a way to log this verbose process by adding some code into /etc/default/grub or something else.
View 6 Replies
View Related
Jul 30, 2010
I tried the google and browsing the known bugs in the sticky before posting this thread.On boot the machine is pegged at 100%. It is a dual-core with 4GB of ram and is running 10.04, 64bit. Also, as time goes on it eats up all the ram till theres maybe 32mb free. What happens is there are multiple 4-10+ identical processes running. seem to be gnome related.The machine sits idle on my floor and runs samba and apache/mysql/gallery for my test website that no on but myself visits.
View 5 Replies
View Related
Mar 8, 2011
Still on lucid, I am trying to configure a decent console based boot process. I had to figure out some startup script errors and was upset what I had to fix just to see all messages properly. For me, having a 'talking' OS in favour of a Colourful-but-Black-Box-Liar without even one single record of a good logging policy is just one, but big plus of running Linux - please stop to windooze Linux
What I want:
- add 'text' to the kernel parameters (fixed or grub editor)
- have all messages issued during the boot process on the console
[code]...
View 8 Replies
View Related
Mar 15, 2011
I have installed kernel 2.6.35-23-generic. Everything works fine, even better than 2.6.32. But i have one problem. Every time i select kernel 2.6.35-23-generic
in grub menu i get some error message, than disappers and boot process continue normally. And everything works fine. But i don't know what this message is. I checked dmesg, boot.log, CTRL-S doesn't work to hold the error message - this error is not logged anywhere.
So, what can i do?
View 1 Replies
View Related