So I (being an idiot) screwed up my boot process. While tinkering around with random things I was reading here and there, trying to get my Burg and Plymouth resolutions to look normal, I think I tried something, not realizing that it was intended for intel graphics (I am running ati). During boot I get a "FATAL; Error inserting i915 (/lib/modules/2.6.38-10-generic/kernel/drivers/gou/drm/i915/i915.ko): No such device
View 2 RepliesOn my hard disk I have ubuntu 9.10 (/dev/sda6) and Slackware 13 (/dev/hda1). Since Ubunutu was installed second, it replaced Slackware's lilo with grub. Anyway I modified grub and got Slackware 13 booting also, I has been this way for a couple of months. Tonight slackware would not boot, it kernel panic'ed.Complained about no device /dev/sda1 and listed possible devices, /dev/hda1 (What it is supposed to be) being one of them. What the heck, what changed???
A quick check of /boot/grub.cfg first showed that the las cahnged date was 2010-1-30. What? I have not touched grub.cfg since the Ubuntu 9.10 install. But, I remember that about that date I did a system update. there were four Slackware menuentries, and I remember only one. Strange. Anyway I changed Slackware's grub menu entry to root=/dev/hda1 and rebooted. Now it complained about no known file system, Slackware 13 is ext4. Here is the Slackware menuentry:
[Code]...
when i try to boot from the disk i burned, the screen show to lines of code, then pauses and never continues with any process.
View 1 Replies View RelatedI have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies View RelatedMy desktop is screwed and there is no button to close my session and open a new session with a working desktop. How can I do that?
View 2 Replies View RelatedIs there a way to fix this. I know once a theme is applied it's suppose to take affect on everything. But, my folders (and the stuff that you see below, folders and icons etc..) stay the same no matter what theme I use
View 2 Replies View RelatedSo, I ran an apt-get update, and got these error messages:
Code:
Err http://us.archive.ubuntu.com karmic/main Packages
404 Not Found [IP: 91.189.88.45 80]
[code]....
I have a older dell inspiron laptop running xubuntu 9.10. It has run fine for quite a while. I recently hooked it up to my plasma tv to watch some some movies and now it crashes when I try to log in. The process I used to hook it to the TV was: connect VGA cable then boot into the external monitor, then shutdown. I have done this in the past with other laptops and it always went back to normal when I boot without the VGA cord attached.
What happens now is I try to log in then the screen flashes and sends me back to the login screen. One more thing to add, I didn't have to use the login screen prior to this problem, it was set for auto-login.How can I fix this? I can get to the terminal via CTRL + F2 and via SSH.
I actually wanted to create partitions on my usbstick, but instead I fdisked new partitions onto my boot + datadrive. It is still running. Is there a chance I can recover that?
View 5 Replies View RelatedI plugged in a second monitor to my new Meerkat installation and xorg stopped working.
When I took the monitor away it still wouldn't work, so I tried entering with safe graphics and that wouldn't work.
I uninstalled xorg and reinstalled and ran the dpkg-reconfigure xserver-xorg but still no luck.
I have tried reverting the vesa driver but it still won't work. The screen flashes like it's trying but just gives up.
I don't know what to do now except reinstall the partition.
This hasn't happened to me before, but I develop for the Android platform and (perhaps needless to say) I really need to be able to debug on a real device. On past installs, my device was recognized automatically and debugging was as easy as checking "debug" in the Android's settings, but now (after updating to Maverick from Lucid) the phone registers with adb as?It mentions some necessary tasks for set-up on Ubuntu, but only mentions this process for Dapper/Gutsy/Hardy. Is there any personal experience out there that can confirm that this works and/or is necessary on Maverick?
View 1 Replies View RelatedI updated my version of ubuntu to 11.04 I think and installed my ati drivers. Then tried to change some settings, rebooted and when I try to log in it acts like it will but exits back to the loging. How can I access console? Alt+Shift+F1 is not taking me there..
View 1 Replies View RelatedI have a HP ZE2000 laptop with an ATI XPress 200M graphics card that worked great with 10.04, but when I upgraded to the 11.04 the screen is now all screwed up and I cannot figure out what happened. I even downloaded the .iso and booted up on the LiveCD and it is still screwed up. I am assuming something is screwed up in the graphics setting, but how do you change it if you cannot see it?
View 1 Replies View RelatedI'm back on my iPad because I deleted the partitions and this is what came up
Error: no such partition
Grub rescue> _
I have 2x 2TB drives for data storage in my system. I placed both drives in a volume group and made 1 big 4TB partition on it. I made it ext4 and mounted it in my Ubuntu Server environment and used it for a while without any problems. Just now I wanted to work a little with Windows 7 and I installed it on a separate hard drive (a 500GB one). This went fine but the (f***ing!) Windows 7 installer automatically made a 100MB system reserved partition on one of the 2TB drives (because the freaking MS OS saw them as unallocated space). That basically scewed up the volume group.
Running vgchange -ay gives an error that device with UUID (..) couln't be found. Running vgchange -ay --partial works and activates my volume group as read only. When I try to mount my logical volume inside that volume group mount gives the error that I need to specify the file system. When I do so with mount -t ext4 it returns the error that it's the wrong file system. Is there a way for me to fully restore my volume group? Or a way to mount what's left of it so that I can backup as much data as possible?
I upgraded to 10.04 weeks ago and have been running it fine.Now when I start up my computer it gets to the GRUB loading stage (counts down to 0), then the monitor goes blank for a moment and then several thin scratchy lines about an inch wide in total appear across the top of the monitor and it just freezes there.The boot process just stops.I've had these lines appear ever since I upgraded, but they were always momentary and the boot process just continued. Where do I start in diagnosing and fixing this?
View 2 Replies View RelatedMy system after installing Ubuntu 10.04 has an annoying 30 second pause during the boot process. It comes after BIOS checks and before the splash screen, the monitor is just black with a flashing cursor. The system has two IDE drives (/boot and /home) and a SCSI drive (/). There is a SCSI MO drive on it's own controller.
Partial lspci:
01:09.0 SCSI storage controller: Adaptec AIC-7892B U160/m (rev 02)
01:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 23)
I attached a clip from bootchart and a boot log file.
Vista won't start but Ubuntu will, all her documents are gone because my sister stepped on our disk, I can't bring files over to Ubuntu for them because the entire partion for Vista deleted itself automatically.
View 9 Replies View RelatedI had Ubuntu 9.10 installed and working great. I wanted to check out SUSE because i heard it was better for laptops and wanted to test it out. Went through the install, which was a bit more complicated partition wise than I'd like, asking the begin and end segment shell or something. I changed them to give me a 5GB partition, deleted an old partition of gNewSense (wireless was just too difficult to implement ie. work) and tada... stuff broke. gNewSense still shows up in SUSE's "GRUB" but I can't boot to it. When I threw in my 9.10 cd to fix everything, it showed that 9.10 was still installed and gNewSense was not.
So, how can I fix this. Is there a way to just reinstall the 9.10 GRUB for the Ubuntu I already have installed? The sooner the better, Ubuntu was my primary OS and all my stuff is on it! FYI, do not recommend SUSE as far as installation goes
local network access ok, no internet access.......... weird. IFCONFIG shows my static IP, but I cant access the internet at all.
View 2 Replies View RelatedI had it working perfectly everything worked including my headset. The only problem was certain programs were too quiet for my taste and seeing as i have a laptop and cant manually turn up the speakers i looked for a solution and found
Code: [URL] I followed those directions to try and boost the poor sound volume that has plagued me in ubuntu distros. Instead sound sparsly works. It is quieter than was, and if chrome is open at all no sound will play at all in rhythmbox or amarok(the play button dont even works it just sits at 0:00) Only after chrome closes does it play my music files again but only on this partition. As now my windows partition thats also located on this fakeraid just magically disappeared.
how to fix this as i dont even know what i did to begin with. how i can trash kde and start over from within gnome(havent tried to see if it works there yet though) EDIT: Logged back in to gnome and everything works fine. The missing partition is auto mounted like i wanted, the sound is perfectly fine. Obviously something got screwed up in the kde config but i dont know what or what to look for as i have never used kde before.
I had ubuntu, mint and win 7 now i cant boot non of em having pclinuxos installed in a newly created partition. grub only shows pclinuxos and nothing else.i cant even see my other partitions .. installed pclinuxos as root.
View 9 Replies View RelatedI really don't know what to say or begin, my drive was working fine and then I installed dvdshrink via Wine and backed up a DVD using Brasero to burn the image created. However, upon completing the copy and trying a new disk it wouldn't read it at all other than recognizing it's there in places, the desktop, and with a startup window.But nothing will play it, making it very frustrating since it had worked prior to completing the burn. I don't get it
View 4 Replies View RelatedI got a problem. At the day of New YEar, i got a virus, that my antivirus big time. When i started Windows, i instantly got BSoD. I managed to format my HDD, and now i wanna try to install Ubuntu. It has been working before, but after an update, I can't get further then the logo in the boot process. Now, I don't have any OS. Ubuntu & Kubuntu both just gives me the logo/loading screen, and then goes black..
windows 7 also just goies to "Starting windows"... Prretty annoying.
Think i got 3 GB RAM, 950gb HDD, and 2x 128 MB ATI X-Fire video.
I would like to customize my bootprocess on Karmic Koala.on <= jaunty i have been using the bootupmanager but on karmic it does not list all the processes and their state properly. so i think the internal changes within the karmic bootprocess have made bum inoperable. which is not that bad since karmic boots much faster but still i would like to make some changes to karmics boot.
View 1 Replies View RelatedFighting against Grub2 boot troubles, i've seen on screen that the problems comes when detecting internal SATA devices.
But logs dont help about the scanning boot process, so i search a way to log this verbose process by adding some code into /etc/default/grub or something else.
I tried the google and browsing the known bugs in the sticky before posting this thread.On boot the machine is pegged at 100%. It is a dual-core with 4GB of ram and is running 10.04, 64bit. Also, as time goes on it eats up all the ram till theres maybe 32mb free. What happens is there are multiple 4-10+ identical processes running. seem to be gnome related.The machine sits idle on my floor and runs samba and apache/mysql/gallery for my test website that no on but myself visits.
View 5 Replies View RelatedStill on lucid, I am trying to configure a decent console based boot process. I had to figure out some startup script errors and was upset what I had to fix just to see all messages properly. For me, having a 'talking' OS in favour of a Colourful-but-Black-Box-Liar without even one single record of a good logging policy is just one, but big plus of running Linux - please stop to windooze Linux
What I want:
- add 'text' to the kernel parameters (fixed or grub editor)
- have all messages issued during the boot process on the console
[code]...
I have installed kernel 2.6.35-23-generic. Everything works fine, even better than 2.6.32. But i have one problem. Every time i select kernel 2.6.35-23-generic
in grub menu i get some error message, than disappers and boot process continue normally. And everything works fine. But i don't know what this message is. I checked dmesg, boot.log, CTRL-S doesn't work to hold the error message - this error is not logged anywhere.
So, what can i do?
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....