Fedora :: What Is Process To Make Disk Boot-able?
May 5, 2010
im looking to boot a PC104+ from a linux floppy...
a) what version should i use that would fit and boot on a floppy?
b) is there any place i can still easily find that version?
c) what is the process (if any) to make the disk bootable (like msdos boot format)
d) can this boot floppy then be installed on a local drive?
i know that seems like a lot but they all kind of go hand in hand from my experience using DOS in such a way. im still out there searching but kudos to anyone who can help.
View 1 Replies
ADVERTISEMENT
Jun 15, 2009
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
View 3 Replies
View Related
Aug 24, 2009
There is a disk 500 gb, it is broken on /boot and on /root and on /dev/sda1 and /dev/sda2. Whether prompt it is possible to redistribute a disk without loss of data namely it is necessary to make/boot and two equivalent on disk volume.
View 3 Replies
View Related
Jan 16, 2010
when i try to boot from the disk i burned, the screen show to lines of code, then pauses and never continues with any process.
View 1 Replies
View Related
Apr 24, 2010
I have OS9 and a PC with Win7. what is the best tool to burn the CD in Windows or OS9? I used Transmac on the PC but the G4 Cube won't boot from the disk though it reads it in OS9.
View 9 Replies
View Related
Jul 22, 2009
I've just installed LAMPP on F11 I wanted to share the process to make Xampp work on linux (fedora) 64 bit.
1- Download Lampp : [URL]../en/xampp-linux.html#374
2- log as root, and unzip the archive file in "/opt" : it is installed !
3- to launch lampp : log as root (or sudo), and use "/opt/lampp/lampp start"
You should have error messages ! So do the following : - modify "/opt/lampp/lampp" : comment this part of the script [URL]..it-rhel.html):
# XAMPP is currently 32 bit only
#case `uname -m` in
# *_64)
# if /opt/lampp/bin/php -v > /dev/null 2>&1
# then
# :
# else
[Code]...
View 6 Replies
View Related
Nov 11, 2009
I have made out a little software as to talk with my friends through network . there are two parts : one is listening to receive messages ,the other will send messages. but the firewall is bothering .so I want to know if I can make my software listen to port 80 while apache is also running .
View 11 Replies
View Related
Sep 1, 2009
Nothing is working,[URL] My bootable pendrive is not seen by grub. The tab in grub, e, gives my 3 partitions only
[URL]
View 2 Replies
View Related
Oct 16, 2009
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
View 2 Replies
View Related
Jan 9, 2010
I currently using Ubuntu 9.10 last update formated with on a ext3 format. I have been a very happy ubuntu user for about 1 year. I have a win7 but I really do not see the point in installing it any more (only when I feel like playing a game).
Any my question: Some time ago I read somewhere that it is possible to make a customised boot "disk/DVD" so the programs etc. is intallled/deleted like you what from the beginning. ex. late week one of my harddrives crasched - and therefore I created a new and had to go find everything again. (codecs - program - visulizations and so on) I more or less use the same basic thing everytime for everything to work probably to my liking, but this takes me about a day (more or less) and this time wasted.
View 5 Replies
View Related
Jul 24, 2009
Everything seems to be fine and everything boots up in fedora 11 still; However, the recent updates to my system really hangs my boot time up and it takes a while for it to boot strangely... don't know what exactly could be going on really, but it's doing this for the current and previous kernel of F11. I'm on Fedora 11 32bit x86. My log file: [URL]
View 14 Replies
View Related
Nov 9, 2009
The boot process fails using; 2.6.30.9-96.fc11.x86_64. I am able to successfully boot by selecting 2.6.30.5-43.fc11.x86_64 from GRUB. The last few messages I receive when booting using 2.6.30.9-96.fc11.x86_64;
ADDRCONF (NETDEV_UP): eth0: link is not ready
Sky2 eth0 link is up at 100 mps, full duplex flow control rx
ADDRCONF (NETDEV_CHANGE):eth0: link becomes ready
audit (1257757711.701:20095): auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 op=remove role key=null list=2 res=0
audit (1257757711.701:20096): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
View 1 Replies
View Related
Jun 5, 2010
I did a minimal install of Fedora 13 (i686), added X Window & LXDE groupinstalls, and xorg-x11-fonts-base, switched to level 5 in /etc/inittab.When rebooting, the First Process indeed starts, but any character seems to be replaced with squares. What am I missing ?
View 2 Replies
View Related
Dec 28, 2009
I'm attempting to install F12 64 bit. I currently have F10 running on this system. I'd like to do a clean install. I'm using the DVD. I boot the computer with the DVD in. I choose the first option (Install or upgrade). It starts the boot process and then it hangs. [URL]
After asking at #Fedora I was given the advice to boot with `intel_iommu=off`. That gets me slightly further in the process. It gets to the point where anaconda is starting. Then all heck breaks loose. It appears the monitor loses the signal from the computer (power light turns red just like if the computer was off). The caps lock and the scroll lock lights on the keyboard blink about once a second. The DVD drive continues to spin for about a minute and then stops. Since I have no display, I have no idea what's going on.
View 2 Replies
View Related
Jun 4, 2009
This doesnt really bother me at all, Im more curious than anything but- When I first installed fedora 9, during startup there was a bootsplash during the boot process. When the kernal was updated, the bootsplash was replaced with scrolling text (I have done several kernal updates, it was after the first one the scrolling text happened). Is there a way of reverting back to the bootsplash or is it more trouble than what its worth?
View 5 Replies
View Related
Jul 19, 2010
For a diskfull node (the OS installed in a disk), I can use the 'insmod' command to insert a kernel module into the kernel. And after the reboot, the module is still in the kernel. I have a question here: how, when and which kernel module will be loaded in the boot up process for a diskfull node?And for the diskless node, can I use the chroot or some other ways to install the kernel modules into ramdisk, so that kernel module can work when the diskless node boot up? I think it needs certain mechanism to load the kernel like the boot up of diskfull node.
View 8 Replies
View Related
Sep 4, 2010
Ever since the kernel update to 2.6.34.6-47.fc13.x86_64, my boot process hangs at about startx time. I boot cleanly at runlevel 3 in either this or the previous 2.6.33.8 kernel. If I execute startx from here (in either kernel), the system hangs at the same place. During the early troubleshooting, I read in another thread (250929) about installing xorg-x11-drv-catalyst, which I did using yum. This led to the failure of the 2.6.33 kernel; yum remove did not fix this. I have carefully followed the instructions in the fglrx HOWTO (updated a week ago by Hlingler) as they relate to a PAE kernel (including reinstalling mesa-libGL), and that fixed earlier difficulties. Hence, I felt I needed a new thread.
dmesg tells me
Code:
microcode: CPU0: patch_level=0x2000032
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
Linux video capture interface: v2.00
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
microcode: CPU1: patch_level=0x2000032
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 .....
But the program itself reports
Code:
# microcode_ctl -h
This program is for updating the microcode on Intel processors belonging to the IA32 family - PentiumPro upwards (x86-64 included). It depends on the Linux kernel driver. The website urbanmyth.org/microcode (mentioned by yum info microcode_ctl) clearly indicates that Intel has taken over this microcodecode distribution, and suggests that it is no longer valid for AMD processors.
I found a reference to a kernel configuration flag CONFIG_MICROCODE_AMD (as a plausible subsititute for CONFIG_MICROCODE_INTEL) that possibly belongs in a script in /etc/init.d - but the above context leads me to suspect this is not true any more. In any event, those flags are not mentioned anywhere in my init.d scripts - in fact nowhere in the entire /etc tree. My microcode file exists, and is dated March 23. How do I get it installed? Or is this completely unrelated to my hanging boot problem, as suggested by the "platform microcode" line in the dmesg output? If so, where should I be looking?
View 4 Replies
View Related
Jan 24, 2011
eCouldnyone help me out to put the right configuration parameters in the grub.conf file so I can enable or disable the Fedora Logo on boot time ?
Currently I'm seeing 3 bars being filled on boot time. I need to get back the Fedora Logo during the boot time process.
How can I do this?
View 10 Replies
View Related
Mar 31, 2011
I am able to retrieve data off a RAID5 array. History: My system disk was partitioned to 10 gigs and over time was filled up to 100% locking me out of the GUI (I am a casual user). Now that I am relegated to the CLI, I need help to see if rebuilding the array and keeping the data intact is possible. I have three sata hard drives in the array and now it appears during the boot process, it fails and can't find the array.
I did the following:
mdadm -D /dev/md0
and here's some of the output:
State: active, FAILED, Not Started
And out of three drives, it states that two have failed. I find this hard to believe as I have had no issues until my system disk was full. A coworker today helped me find some files to delete and now have the system disk down to 97%/8.8 gigs yet I can still not enter the GUI due to the array issue.
Out of the three discs, here are the results (taken also from mdadm -D /dev/md0):
Number Major Minor RAID device STATE
0 8 1 0 active sync /dev/sda1
1 0 0 1 removed
2 0 0 2 removed
Sorry for providing so little, but I am in (Repair Filesystem) mode and only have local access to the machine meaning all outputs will need to be retyped.
I am able to do anything to the box as its only purpose was media storage and serving.
View 14 Replies
View Related
Jun 6, 2011
While booting my fedora15, it gets stuck for about 5-6 minutes. Previously there was no problem. I don't know what made this problem. After going through the boot process, error occurred during network process. Using following command I got the result.
Code: # systemctl status network.service
network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: failed since Sun, 05 Jun 2011 21:13:55 +0545; 11h ago
Process: 845 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/network.service
Also right after the long pause following messages are printed
Code: 261.742053 usb4-1: device not accepting address 4 error -7
261.794087 hub4-0.1.0: unable to enumerate usb device on ports
I noted it down as soon as I saw the message after that long pause.
View 4 Replies
View Related
Mar 24, 2010
I'm not sure what caused it, but it happened right after running 'yum update'. It may be because it installed a new kernel, and there are now two kernels listed in my grub.conf and at boot; 2.6.31 and 2.6.32. System boots through a list of things it's starting up and stalls out at ATL or ADL or ADM maybe. It hangs there for a minute or so then flickers. This happens every time at boot. It's a bit difficult to post more information since I can't get past that part of the boot process, and I can't seem to be able to skip it either. It may be worth mentioning that this is a mini-itx motherboard. Intel Atom 330 1.6, 2GB DDR2, onboard GeForce 9400m. It's a zotac ionitx-a-u. I've installed a fresh copy of Fedora 12 lxde.
View 3 Replies
View Related
Nov 11, 2010
I've some file with .sh extensions that runs some softwares.Now,how do I stop running that filesI know we run the command ./start_tomcat.sh to start the apache.Is there any command to stop that file/process or is it just kill the process to stop the process
View 2 Replies
View Related
Dec 6, 2010
Is there a way to know that process using highest disk i/o.
iostat only displays about the disk utilization.
View 1 Replies
View Related
May 13, 2010
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
View 5 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
May 18, 2011
I am doing a program that reads data from a gps and some other devices and writes some files with all the information. When I run it normally it works fine, but if I run the program in the background (with the ampersand) files are not created until I bring it to foreground or close it. I am confused, the program should run the same way with and without the ampersand. (Could it be that the main process that creates all the threads does not create them when it is executed in background? It seems like if the program is stopped until I take it to the foreground).
View 4 Replies
View Related
Jan 24, 2011
how to check which process consuming a lot of HDD I/O ? Do You know any good command which can show me which process saving something big on the storage system ? "iostat" or maybe "ps" ? Would be great if somebody could past me here nice command.
View 3 Replies
View Related
Aug 17, 2011
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
View 4 Replies
View Related
Feb 2, 2010
I have a hp laptop with two internal drives and I also have a large USB drive. When I boot normally the internal boot drive is /dev/sda, the second internal drive is /dev/sdb, and the USB drive is /dev/sdc. I used Acronis True image to clone the internal boot drive onto the USB drive. I would like to be able to boot the Fedora 12 instance on the USB drive but do not seem to be having much luck... Here is what I have tried so far... The following is an entry in grub.conf
title Fedora (2.6.31.12-174.2.3.fc12.i686.PAE)
root (hd0,5)
kernel /boot/vmlinuz-2.6.31.12-174.2.3.fc12.i686.PAE ro root=UUID=101b1556-d097-4d85-9bc5-fac2f9abe5d8 LANG=en_US.UTF-8
[code].....
and tried to boot....Got a no such device error.While in grub I tried the grub command setup (hd2) and then got in the bios and set the boot order to USB drive before internal drive.In this case a reboot does nothing I just get a flashing cursor, grub is not entered.
View 1 Replies
View Related
Jul 15, 2010
I am running Fedora Core 13 and I am having problem creating a bootdisk. As I enter the command mkbootdisk, I receive the error "command not found". I even tried to enter the full path i.e /sbin/mkbootdisk while logged in as root and I still get the same error.
View 4 Replies
View Related
