i am runnin slackware 64 bit and trying to install eiskaltdcpp. i am new to slackware and i dont understand how it should be installed. i have found the eiskaltdcpp-2.1.1-i486-1sl.txz package but it seems it is not for my arch. i also cant find all the dependencies.
View 3 RepliesI installed eiskaltdc++ from the software center and occasionally when I launch the application, it does not load. No error is produced at all, so I tried launching from terminal to see if any errors are produced and the following comes up --
[Code]...
I have installed multilib support in my 64bit slackware 13.37 installation than I proceed it to install google earth from slackbuilds... and did ln -sf /lib/ld-linux.so.2 /lib/ld-lsb.so.3Now when I try to run google earth I get:[ 760.092745] googleearth-bin[3647]:segfault at 984f7d31 ip 00000000984f7d31 sp 00000000ffbfe100 error 4
View 14 Replies View Relatedusing Slackware 13 64bit, 2.6.29.6-smp, KDE desktop. i installed the flash-player-plugin using sbopkg. when i try [URL], it says i'm missing the flash plugin. i copied the. so file to
/usr/lib/mozilla/plugins
/usr/lib64/mozilla/plugins
and i still get the same result. what am i doing wrong?
I bought a new laptop HP Pavillion dv3-4170ee that has Core i5 2.53ghz dual core with hyper threading, intel hd graphics and Ati Radeon HD 5470 512 mb dedicated. It came with windows 7 64bit. It also has 6 gb ram(2gb in first slot + 4 gb in the second one).I installed slackware 13.37 64 bit. It installed just fine. installed lilo onto mbr. When it boots up it shows the slackware screen. I am able to boot into windows just fine. When I select Linux it boots into linux bios data check successful. lots of stuff goes on the screen the normal linux boot stuff. and then it goes to the next screen and stays blank
Nothing happens and even the hard disk light is not blinking.By the way the HDD is Western Digital.
I have a couple questions about Xfoward.
1: How much does it affect securty, over a lan network?
2: Will it cause any other security issues?
3: The most important is can I forwad X11 from a 32 bit slackware to a 64bit slackware
I'm trying to upgrade KDE from 4.2 to 4.3 since I encountered couples of problem with it and some people suggested me to upgrade it to 4.3.
Questions:
1. Is KDE 4.3 available in 64 bit?
2. KDE consists of bunch of packages, what is the best way to start? Should I uninstall the whole current packages in my machine and then install the new ones?
3. Using pkgtool, how do I know if I remove the whole KDE packages? Are all KDE packages named that begin with word "KDE"?
4. How to do this safely so to avoid corrupting the system?
just wondering has anyone gone through ATI Radeon HD 4830 with Slackware 13 64bit, can it be recognized correctly by HAL with built-in open source radeon drivers or it should be installed with fglrx.
View 14 Replies View Relatedi am trying to install Slackware 13.1 64bit on my HP Desktop. right now i am writing from a debian.
on the installation they ask me if i want to setup network right now.. when i press "yes" they need: name, domain, proxy etc... what is that things? :S slackware create new connection that i am going to pay extra? (pay extra money for that connection slackware create?) if i press "No" after the log in my network is not working..
my Questioni is: while i am complete the boxes on network setup (name,domain etc) slack creates new internet line that its going to pay? or not?
i have DSL Internet Acccess.
I want to use the BU-353 GPS Receiver with Kismet in a Slackware 13 64bit install. I'm holding off on buying it because, even though they have linux drivers, the only distro listed in the linux drivers section is Redhat.Will the Redhat drivers work with Slack?[URL]..
View 5 Replies View Relatedtried install kchmviewer (5.1) from slackBuilds, but it seems like it's not compatible with slackware13.0 64bit. Also tried to install firefox chm reader add on, but its also 32bit available only! Has anyone installed any kinda of chm reader on slackware 13.0 64bit.
View 8 Replies View RelatedI'm trying to install pdksh-5.2.14 in my Slackware-13.0-64 machine. Does this mean the software is not for 64bit machine? How can I fix this? The info file doesn't show me the location of the 64bit version, therefore I assume this one worked on such machine.
View 4 Replies View Relatedi'm fairly new to linux and i'm having a slight problem with Plane Shift. it seemed to install ok and gave no errors but every time i try to run ./pslaunch from the game dir i get this:
Code:
./pslaunch: line 5: /home/deyna/Games/PlaneShift/pslaunch.bin: No such file or directory
./pslaunch: line 5: /home/deyna/Games/PlaneShift/pslaunch.bin: Success
yes i am using the 64bit installer
I have installed (twice) slackware 13.37 64 bit on a virtual machine (vmware workstation 7). But when i try to startx the kde window starts to load and the harddrive on the kde startscreen shows and then it crashes. Anybody that running slackware 13.37 on a virtual machine?
View 10 Replies View RelatedI've opened a topic here: [URL]
View 16 Replies View RelatedI have several server (mailserver, webserver and lot of fileserver) all are 32 bit slackware and I am satisfied! My company plan to upgrade our server and buy a 64 bit server maybe amd x3 or opteron? Is slackware 64 bit will help boost my server performance? Or will I stick to 32 bit for now?
View 7 Replies View RelatedThe new file can be downloaded here. (32 bit is available as well) I have installed it already, and it works on vimeo and ......
View 14 Replies View RelatedI have a Brother MFC3360C printer that I would like to use. Has anyone had any success getting this printer working.? I've had it working on Fedora and Mandriva in the past but haven't been able to get it going on slackware. Printer setup recognizes it correctly but It's not in the list of available drivers for it and Brother only has 32 bit drivers for Deb and .rpm on their website, no 64bit.
View 6 Replies View RelatedI have searched around but found no solution to my problem so here it goes. I can't have any sound on a recently (re)installed Slackware 13.1 64bit. Running alsaconf shows me an option of:hda-intel Nvidia Corporation High Definition Audio Controller hda-intel Intel Corporation 5 Series/3400 Series Chipset High Definition then I get an ok from ALSA but still no noise... alsactl store tells me that there are no soundcards found. I also get a notification from KDE telling me that the device HDA Intel (ALC269 analog) does not work. See attached KDE1.png
View 14 Replies View RelatedLooking for moral support and guidance. Currently have 13.1 running nicely with the following partitions:
/swap
/
/home
/var
/usr/local
/notlinux (my name for a storage partition when I want to start all over again)
I have decided to tinker with Slack64-current with multilibs. My intent is to shrink /notlinux an add a new partition for 64's / . Then dual boot the system.
/swap and /usr/local
I see no problem with mounting these partitions in Slack64. I would have two 'tgz' directories [ tgz & tgz64 ] in /usr/local where I would seperate SBo packages (for my benefit). Don't know what having separate /tmp directories would have on sbopkg but that's not a material issue. confirm I can share these partitions.
/home
99 & 44/100 % sure if I changed/added my name from 'dad' to 'dad64' it would not be a problem sharing the /home directory. But what about keeping the same name/uid#, would things get fubared when I jump back and forth between 13.1 and current-64. Comments?
/var
Think I might be getting into trouble here. Suspect pkgtool, installpkg, upgradepkg ... would all continue to work because /var/log/packages would actually have different names [_64] for the 'same' package. At a minimum I want to share the mysql database so might have to create this as its own partition. Other than it would be a mess reading log file would sharing this directory be a major issue.
I've been using Slackware 13.0 32-bit because of a problem supporting RAID 0 metadata for Intel Matrix Storage Manager. I would like to move to 64-bit with Slackware 13.1 but I can't see any way to use a 64-bit kernel with my RAID setup. Because the "mdadm" in Slackware does not support the "-e imsm" option to read Intel Matrix Storage Manager Metadata I have been using "dmraid". Unfortunately I'm having trouble finding a way to make "dmraid" (a 32-bit application) work on 64-bit Linux. It appears that "dmraid" may be unsupported now, and I can't find a good place to get current source to compile on a 64-bit system. Essentially "dmraid" is only a program to interpret metadata and then configure the standard Linux device mapper to set up the required mirror or stripe mapping. So, it actually does not have to interact directly with the kernel.
I believe it only issues I/O requests to read disks and configure "dm" devices. So far I have not had to rebuild "dmriad" since Slackware 10. I don't know if 32-bit libraries are an option, or if those can be added to an initrd image (required to use dmraid before booting). People claim that "mdadm" will work with Intel Matrix Storage RAID 0 but I have never found any detailed information about how to do that. When I've tried the few examples I've run across on Slackware I just get an error that the "imsm" metadata format is not supported. I have not been able to locate a site to browse Slackware packages. I was hoping to find "dmraid" in the 64-bit packages. I think "dmraid" was at one time in Slackware but perhaps not any longer.
I installed latest 64bit updates from current and it broke direct rendering for my radeon 9550 card using X11 drivers.Xorg.0.log:
Code:
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
[code]....
64bit Slack doesn't recognize my ethernet device. ifconfig -a show no eth0. It's an onboard nvidia MCP55 ethernet nic. Never had this problem using 32 bit Slack.
When I try to modprobe forcedeth I get the following error:
repeats those two statements 3 times
I just recompiled my kernel with every possible 10/100 ethernet device included in the modules. Still no go.
After trying without success change from windows to ubuntu (dual-boot unsolved problems), I decided to try slack as I have seen that user to user support for slack is usually best oriented and faster.But I am having some problems in order to install slack because of GPT support. As I know its a bad idea to start to asking for help without speak what I have tried, lets to this first:
At first I tried just to boot from DVD and went through the install using the help inside the disk. It doesn't work because either fdisk and cfdisk that are suggested in help doesn't offer support to GPT.
After that first try i looked to:url
But also it suggest the use of fdisk. However, it suggested too that I could use another partition application and since I have the live cd for ubuntu, I tried to partition from there and use those partitions for installation.
At first I tried to format as ext4, but i discovered that slack still dont offer support to this format (at least the version that I downloaded).So I tried again but this time using ext3 as format to my / and /home and use the swap offered in the application for use as swap (duh!)But every time I try to install using the dvd it doesnt find my partitions with fdisk, only with the parted command I can see my partition table displayed correctly.However, every time I try to run setup it say that it didnt found and linux partition (swap also when i try to target).So this is my dilemma, I cant use fdisk, in the parted manual (url) it only says that it supports ext2 (not mention ext3) and also i dont find any command to use with parted to mark the partition as 82.I ran through this 2 other posts (url), but as I am still waiting for some update there I decided to ask it here hoping to discover that this is an easy problem.
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedDownloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies View RelatedI have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?