I installed latest 64bit updates from current and it broke direct rendering for my radeon 9550 card using X11 drivers.Xorg.0.log:
Code:
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
[code]....
After applying the 31st Jan and 1st Feb updates to -current (32 bit), alt-tab to switch between windows is no longer working in kde. It seems to lock the desktop and then after a few seconds kde goes back to the login screen. If I disable all desktop effects then alt-tab works again.
View 10 Replies View RelatedI installed ubuntu 10 just yesterday. Everything was working just fine. The auto-update function advised me to download and install the latest updates and so I did. It was over 300 MB. I installed it, did a reboot and my internet connection was lost. I tried a few things I found on this forum yesterday. Nothing worked. I can go on-line on the same computer using windows 7. But I always have to reboot to try the different solutions. All right that's fixed! But now I just have to fix Firefox...
View 1 Replies View RelatedLost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View RelatedI have noticed that recently, cannot tell after which update, my mplayer does not scale to full screen. It just shows the movie in the center of the screen with black frame around it.I do not know how tightly it may be related, but xine-check says my X server does not support YV12 overlays (twice, BTW, so there must be a bug in its message file) and has no XVideo support.Is it normal in current for now? The card is X1200 (R690)
View 4 Replies View Relatedjust wondering has anyone gone through ATI Radeon HD 4830 with Slackware 13 64bit, can it be recognized correctly by HAL with built-in open source radeon drivers or it should be installed with fglrx.
View 14 Replies View Relatedlibgmp If you found slackpkg failed for this upgrade because of libgmp not found you will need to grab the gmp package and install manually. This way ought to work:
[Code]....
I just wanted to make sure the latest mdadm hasn't escaped the attention of the Slackware gurus for -current. I bet it hasn't I'm basically in the same situation as described here:[URL]...
View 2 Replies View RelatedI looked at the security adviseries page on slackware.org, and noticed only 1 listing for 2010. I'm currently using alien bob's slackware-current script to make a dvd iso (x86_64.) So is this patch already applied or what? How do I go about maintaining a secure system from here? I've tried to search for clues about this but I'm a little confused (very new to slackware,) so I apologize if this question has been answered many times. Also, when a security advisery arrives, do I need to download the updated package? Or can I simply find a patch from a single source and download / apply them? What would you do concerning this issue? I guess easily applying security updates is where debian shines. I'm really starting to like Slackware though, I must admit.
View 2 Replies View RelatedX crashes and reports a segmentation fault, address nil. I've been using the generic Radeon driver without any problems, until now.
View 14 Replies View RelatedLooking for moral support and guidance. Currently have 13.1 running nicely with the following partitions:
/swap
/
/home
/var
/usr/local
/notlinux (my name for a storage partition when I want to start all over again)
I have decided to tinker with Slack64-current with multilibs. My intent is to shrink /notlinux an add a new partition for 64's / . Then dual boot the system.
/swap and /usr/local
I see no problem with mounting these partitions in Slack64. I would have two 'tgz' directories [ tgz & tgz64 ] in /usr/local where I would seperate SBo packages (for my benefit). Don't know what having separate /tmp directories would have on sbopkg but that's not a material issue. confirm I can share these partitions.
/home
99 & 44/100 % sure if I changed/added my name from 'dad' to 'dad64' it would not be a problem sharing the /home directory. But what about keeping the same name/uid#, would things get fubared when I jump back and forth between 13.1 and current-64. Comments?
/var
Think I might be getting into trouble here. Suspect pkgtool, installpkg, upgradepkg ... would all continue to work because /var/log/packages would actually have different names [_64] for the 'same' package. At a minimum I want to share the mysql database so might have to create this as its own partition. Other than it would be a mess reading log file would sharing this directory be a major issue.
Well since tonight, after the upgrade to the latest current today, it was about a month I didn't upgrade, I cannot "git push" from my windows workstation (through msysgit shell)... I can pull, at least it tells me I'm up to date, but it keeps blocked on the 'push' command, returning only after a long timeout:
[Code]....
With Karmic there's some support for the ati radeon 7000 ve, but it's the default driver with limited or no 3d function. Previous distros supported radeon 7000 ve. Is it likely to expect that Lucid will not support this video card.
View 2 Replies View RelatedCan anyone update me a little on the current styate of Radeon Drivers? I have a laptop with an RS690M video card on Slackware64 & Slamd64
There is
1. Kernel driver (drm/radeon.ko) but I am finding it difficult to find comments on it, except that it does some power management stuff
2. Proprietary fglrx had a recent significant update, and now talks to my card after a fashion (Experimental support)
3. OSS Radeonhd for X, which I gather is probably the worst atm but it's what I have in xorg.conf
4. OSS radeon driver, which is supposed to have more work done on it.
I don't need framebuffer stuff - the screen is hard enough for me to read as it is, but I do like to watch the occasional tv program or dvd and I'd like the video to be keeping up in full screen. ATM, Xvid, Opengl, and just about everything fails to, except sdl.
Is there any way to keep a local install of Fedora current will all the latest releases? example If I'm running F13, is there a failsafe method to have F13 become F14 with out all the drama of reformatting and installing off the dvd? In the past all my attempts have failed, possibily due to having multiple repos is use and kernel patches applied (nvidia central).
View 8 Replies View RelatedHas anyone successfully installed 3D drivers for HD 5750 on Fedora 13? I've tried ATI Catalyst 10.7 and mesa-experimental drivers, but they wasn't working.
View 11 Replies View RelatedI have an MSI U100 Winbook with Ubuntu Workstation 10.04 LTS newly installed (about 4 days ago).
The update manager displayed about 15 or so updates for my 10.04 installation which I installed. Upon reboot, I can not successfully login to the desktop. It will take my username/password, the screen will go black for a couple of seconds, then the error sound, and back to the login dialogue.
A tail on /var/log/messages displays:
atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0)
atkbd.c: Use 'setkeycodes e077 <keycode>; to make it known.
composit sync not supported
These messages keep repeating. I am able to login at the console just fine. I have enabled root login but get the same issues logging in as root. I have googled and found several articles and postings involving these messages but they are all in reference to upgrading from 9.x to 10.04. I did not upgrade and did not experience the freezing of applications as noted in those posts.
I've got a problem when i try apt-get update I get the following in the report:
Failed to fetch http://ftp.uk.debian.org/debian/dist...86/Packages.gz 404 Not Found
Failed to fetch http://ftp.uk.debian.org/debian/dist...rce/Sources.gz 404 Not Found
R
Network is OK, what is going wrong?
1. Which XFCE on install. dvd Fedora 12? 4.4, 4.6?
2. Can I download installation dvd with latest updates?
3. Is it possible to see content of installation dvd Fedora 12?
Consider the following scenario: you have two disks that are kept synchronized by some method. Could be RAID, could be LVM snapshots, could be a script. However, something has gone wrong. The disks are out-of-sync and you don't know which disk received which updates. You want to manually re-sync the disks but how do you figure-out which file to copy where?
I'm thinking of saving recursive directory-listings of the entire disks to text-files. Sorting them on last-update and removing all identical entries from the files.
I have a feeling that this is something that can be done with just a few command's but I need some help to get me started.
I am trying to use an ATI Radeon x300 graphics card with my current system setup with fedora 12 but i am having an openGL issue. I am trying to create a 3D model using comsol and i get an error like:
Failed to initialize 3D graphics. OpenGL not fully supported.
This is a hardware/software issue with the graphics card... not the program COMSOL. How could i enable openGL support to correct this issue?
So, it's 2010 and I already though I got rid of coding my own drivers & compiling my own kernel in normal use... After installing latest Fedora 14 updates, my system won't boot anymore into fedora. Just continuous loop no matter if I select previous kernel system won't boot.
Anyone any ideas? I think it might be ATI driver but not 100% sure since I didn't see any D/A related or Kernel updates wasn't upcoming...
Anyways I will figure out this sooner or later but this kind of updates sucks a bit that your system goes suddenly totally unuseable or system won't reboot, sooo , time to move on with an another distro or is Fedora just RedHat's playaground?
openSuse 11.4 + Gnome 3 (upgraded from oneclick install). A couple of ago I ran zypper update and there were some updates available for chromium (and a few other things). I installed them, did some work in libreoffice (dint use chromium then) and turned the computer off. Today I needed to do some web surfing, so boot up my computer, launch chromium and get the following message (I translated it from spanish as I use the spanish version of opensuse)...
Failed to launch <<Chromium web browser>>
Failure executing child process <<chromium>> (The specified file or folder doesn't exists)
Before the "update" chromium worked perfectly. Now it doesn't even start.
Chromium doesn't start after latest updates(15.0.854.0-2.1)
Distro: openSUSE 11.4 x86_64
chromium, chromium-desktop-kde
Version: 15.0.854.0-2.1
Repo: obs://build.opensuse.org/openSUSE:11.4:Contrib
libv8-3
Version: 3.5.5.0-2.1
[Code]...
opensuse v11.3
linux 2.6.34.4-0.1-desktop x86_64
After the latest round of updates approx Sep 10, sound has stopped working. (I rarely need sound for anything so it took a while to notice.) In Yast :: Hardware :: Sound it lists all of the devices that were previously defined.
- 0: SBx00 Azalia (Intel HDA)
- 1: RS780 Azalia controller
- 2: Logitech USB headset
- 3: USB Audio
Yet when I go to Gnome :: Control Center :: Hardware :: Sound and select the tab Hardware, nothing is listed. I suspect this is why there is no sound. How do I go about reloading the hardware into the hardware listing?
A first for me with Ubuntu. The system has hung. Well almost hung.
After installing the latest automatic updates - I'm sorry, I don't know how to identify which ones they were, but it was on 29 January 2010 - when selecting almost any application the system almost hangs. By almost hangs, I mean, the cursor will move very slightly once every 10 seconds or so, but even if it can be manipulated to a certain point, no action can be taken.
The only way out of this situation that I have been able to find is a hard reboot. (I was used to this type of thing with Windows XP, but had never seen it before with Ubuntu).
Reverting to Ubuntu Linux 2.6.31-17-genereic-PAE at the GRUB boot up option screen solves the problem.
Any suggestions on what might be happening, how to fix it, or if it is even worth bothering with? It is working just fine (so far) on the older generic-PAE.
Ubuntu has been great and it is a great Linux distro. Unfortunately, the update of 9.10 desktop edition to release 10.4 failed on a couple of fronts.
1) Xserver is no longer working;
2) An upgrade of grub-pc causes an exception.
The system ran perfectly before the update was performed. The update resulted in Attempting to install GRUB to a partition instead of MBR. This is a BAD idea. usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and is use is discouraged.
Based on information found at [URL]... an attempt was made to execute the following command. sudo aptitude dist-upgrade But that resulted in E: dpkg was interrupted, you must manually run sudo dpkg configure ato correct the problem The later launches an upgrade of grub-pc. This routine requests the selection of which devices are to be used to store grub-install. When that was done ... GRUB failed to install to the followed devices: /dev/sdb1 /dev/sdc1 /dev/sdd4
Do you want to continue anyway? If you do, your computer may not start up properly. GRUB installation failed. Continue? Questions:
1) Can / should the upgrade of grub-pc be bypassed in order to get the system running?
2) If not, what values should be selected when selecting the devices to store grub-install?
3)Because the computer is a RAID configuration, would someone advise are there special considerations which should be considered?
4) Once grub-pc is resolved or bypassed, should the commands found in the aforementioned article be used to repair xserver.
5) Are there additional measures which will be needed to in order to complete the update to release 10.4?
Here are some helpful details on the system configuration
The computer has four disk drives using RAID 1 and RAID 5.In the following configuration RAID5 Device #0 750.2 GB Sotfware RAID device
#1 750.2 GB ext4
SCSI1 (0,0,0) (sda) 320.1 GB ATA WDC WD3200AAKS-2
#4 primary 250.1 GB K raid
#3 primary 16.0 GB F swap
[Code]...
I had sound before but after one of the latest updates the sound quit working. I read other threads and they suggested to type. Code: alsamixer on terminal. I did that and unmute everything and pumped each setting to the highest possible. When I boot the laptop again everything is muted, How can I save settings or what other solutions are there for this problem.
View 1 Replies View RelatedWe are running CentOS 5.4 x86 on ESX 4 Server. We have a busy Help Desk, a Forum and several name-based websites running. Weve been using CentOS for this 'purpose for several years (different versions) and so far we have never had a problem. On Saturday, I applied all the latest updates including the Kernel updates. I rebooted the server and all seemed well until Sunday morning when I didn't get my Logwatch in the mail. Then I got a telephone call from a customer asking me why I hadn't responded to a Trouble Ticket he had created on Saturday afternoon (creating a TT sends an email via sendmail to all the support staff). I did a few tests and sendmail has just stopped working. The Logwatch had been created and had been sent to root, but all mail for root is redirected to my Mail Server on e different box (GroupWise). There was nothing wrong with the mail server, but sendmail has just stopped.
Fortunately I had created a snapshot before I applied the updates, so I reverted back to the snapshot and mail started working again, but I lost 2 days info because I had run the backup before I applied the patches. Now I see there are 132 Updates available, but there is obviously a problem somewhere in there!
i have a acer aspire one (zg5) with a 2 week old installation of unr. shortly but not immediately following my last update my wifi no longer functions. when i go to the network connections tab in my toolbar it does not list available wifi networks. does not apparently recognize wifi capability at all. but the wifi worked right off the rip on new install.
View 3 Replies View Related
