Software :: Compiling Vlc-1.1.2 Failed
Aug 18, 2010
I just compiled vlc-1.1.2 from source, and it plays video files but without reacting to keyboard input (Setting esc to global does not help; I have to click on the fullscreen panel to minimize it), and when I try to play DVDs, either from disk images or from DVD, vlc opens briefly and then just sits there in the top left corner of the screen. Do I have to recompile for libdvdcss support? And is there a complete list of dependencies to install at one go before running ./configure? I had to install tons of crap, running ./configure over & over again until it threw only a moderate number of errors and ran through. I tried the c-korn ppa but it broke synaptic on my other box (I was able to fix it but don't want to use the ppa again.)
I use lucid on an iMac 7.1. The attempt to upgrade to maverick failed; I should have to completely reinstall which I don't want to do just for vlc.
I still have the generic vlc installed (1.0.6). Can I uninstall it in synaptic without pouring out my new baby with the bathwater?
View 2 Replies
ADVERTISEMENT
Feb 1, 2011
On compiling open-vm-tools-8.4.2-261024 on Fedora 13 x86_64. When I run make, it failed on stage 2 with these error messages:
I think I have to compile these modules into the kernel.
View 1 Replies
View Related
Mar 31, 2010
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
View 4 Replies
View Related
Jun 27, 2010
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
View 3 Replies
View Related
Jun 8, 2011
went through the tutorial on FedoraSolved for securing ssh. I installed denyhosts with yum and then tried to run it with the command line command"sudo /etc/init.d/denyhosts start" but I got the message"Job Failed. See system logs and 'systemctl status' for details [FAILED]"and in the application "services" in the applications menu,t shows an exclamation warning and says that "This unit has failed"
View 1 Replies
View Related
Oct 14, 2010
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies
View Related
Sep 10, 2009
I've read hundreds of threads on this problem but they seem to be intermittent and the resolution has been using a different kernel version.
I'm using the latest kernel but I still have this problem
Running Logical Volume Manager gui and attempting to extend the volume results in the same error.
View 3 Replies
View Related
Jul 22, 2010
Booting up fails with code 126. I am greeted with the following error everyime I start up.
Checking root file system.../etc/rcS.d/S10checkroot.sh: line 174: /sbin/logsave: Permission denied
failed (code 126).
It then says an automatic fsck failed and a manual fsck must be performed, then the system restarted. I have done a manual fsck and it did nothing. I booted up the system with knoppix and did it, nothing.
View 1 Replies
View Related
Apr 9, 2010
Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
View 4 Replies
View Related
Nov 23, 2010
i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory
View 3 Replies
View Related
Mar 2, 2011
I am running Red Hat Enterprise Server 6.0 I am having issues getting kerberos configured as a client to join a domain. Im getting below error message. "Failed to join domain: failed to connect to AD: KDC has no support for encryption type"
View 9 Replies
View Related
Mar 5, 2011
When I try to run the Online Updates to the system through Yast I get the following errors for each package:
[QUOTE]
Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
[Code]...
View 3 Replies
View Related
Dec 12, 2010
I got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph
[Code]....
View 1 Replies
View Related
May 20, 2010
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
View 1 Replies
View Related
Feb 13, 2011
Lately when I've tried to update my packages many of them don't update. I get nothing out of the ordinary when using the terminal but when I try to update via the Update manger I get this error message:
Code:
Error message:
Fetch failed: W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_source_Sources Hash Sum mismatch
W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_binary-amd64_Packages Hash Sum mismatch, W:Failed to fetch http://mirror.steadfast.net/debian/dists/testing/updates/main/source/Sources 404 Not Found [IP: 208.100.4.53 80]
[Code]...
I've tried several different mirrors but get the same error with every one. Same result with ftp as well. Yesterday I upgraded to Wheezy and every package successfully upgraded, but today the problem started again.
View 10 Replies
View Related
Aug 22, 2010
Running Fedora 12, I am attempting to compile an application. The README file tells me that I need Qt 4.6.3. Clicking on System - Administration - Add/Remove Software, I find many packages having something to do with qt, but nothing looks like what I need. Is this available as a package for Fedora? If not, what would I need to do to download and use qt on my system?
View 2 Replies
View Related
Jun 14, 2010
I see references to compiling, but as a newbie am unclear about it. What is compiling, when do you need to do it, and how do you do it?
View 10 Replies
View Related
May 24, 2009
I'm getting these messages Over SSH with the -D switch
Code:
At uni I did this for a couple of reasons, primarily to connect to trackers for bittorrent. I would get these messages fairly often but I never thought much of it because I figured I was just loosing packets over the network or something (understandable in my situation). At home I decided to continue to use this method because that computer is set up in DMZ and is very useful. I havn't received many of these messages but recently all my torrents stalled and I had a whole bunch of these messages. Is it possible my computer just cant handle all the network connections (it's a 2ghz AMD running debian)? What exactly do these messages mean? Is there any way to optimize my connection in any way?
View 1 Replies
View Related
Dec 27, 2009
The Avant Window Navigator beta, as taken from the project's Bazaar repository, isn't configuring correctly on my machine and gave me loads of errors previous to this point, so I've had my hands full for a while now. Three packages that AWN needs to compile (gnome-desktop-devel, gnome-vfs-devel and libgnome-devel) are refusing to install, leaving me with this Quote: checking for AWN... configure: error: Package requirements (glib-2.0 >= 2.8.0 gthread-2.0 gobject-2.0 gtk+-2.0 gdk-2.0 >= 2.10 dbus-glib-1 gnome-desktop-2.0 libgnome-2.0 gnome-vfs-module-2.0 gconf-2.0) were not met: No package 'gnome-desktop-2.0' found No package 'libgnome-2.0' found No package 'gnome-vfs-module-2.0' found.
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables AWN_CFLAGS and AWN_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. and this is why they won't install Quote:hal = 0.5.13-9.fc12 is needed by package hal-devel-0.5.13-9.fc12.x86_64 (fedora) I need an old version of HAL for the "dependency resolution failed" notices to go away. One which PackageKit says is still on my computer. I would try to downgrade via yum but setenforce 0 fails. What do I need to do to get this whole thing finished?
View 14 Replies
View Related
Apr 7, 2010
I am trying to compile kernel 2.6.33.2 (without problems 2.6.33.1), but i got the following message :
[code]...
View 2 Replies
View Related
Nov 10, 2010
compile ParaView myself so that I can install the pvmeshless plugin. I have done that a few times before on Ubuntu machines. Now I read that I might run into problems due to qt4.7 (4.6 is supported by PV). Anyhow I don't even come to that stage since I can't enable python support. The error I get is:
Quote:
CMake Error at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:70 (MESSAGE):
Could NOT find PythonLibs (missing: PYTHON_LIBRARIES PYTHON_INCLUDE_DIRS)
Call Stack (most recent call first):
[Code]....
View 2 Replies
View Related
Jan 14, 2011
I have a problem i can't compile vmware i have all the packages that are needed to compile VMware.The compile can't compile anything. Here is the log of the compile :
Stopping VMware services:
VMware USB Arbitrator [ OK ]
VM communication interface socket family [ OK ]
Virtual machine communication interface [ OK ]
Virtual machine monitor [ OK ]
[code]....
View 4 Replies
View Related
Jun 9, 2010
I'm trying to build the latest XEN 4.0.0 from the tarball in xen.org.
After resolve the dependencies, I finalled compiled the xen kernel.
But the problem, it is not making the intrd for booting (and it is not suposed to do ), it just comments the following on the README source:
Depending on your config, you may need to use 'mkinitrd' to create an initial ram disk, just like a native system e.g.
# depmod 2.6.18-xen
# mkinitrd -v -f --with=aacraid --with=sd_mod --with=scsi_mod initrd-2.6.18-xen.img 2.6.18-xen
[Code].......
I really want to test the pastrough and snapshot new features in XEN, since i really start to hate vmware eating all resources with more than 1 vm (I know, there is VirtualBox, but I used Vmware first since you can record videos and for portability).
I already used XEN 3.4 a lot in my own labs inside my laptop, (since I learned how to use virtual network in nat mode), and since is the default hypervisor on the job (we are migrating the lasts Vmware vms !!! cool!!! ) and I really really love XEN (is amazing, 4 vms, 1 host in a laptop turion 64 x2 with just 3GB ram!!! and my processor is not flaming!!!).
View 1 Replies
View Related
Dec 6, 2010
I was reading the following forum guide:openSUSE software installation hints So I decide to install from the souce code the following webcam application:
GTK+ UVC Viewer In order to avoid problems ( it is my first installation from souce code) I downloaded and unpacked everything in an USB key and I worked from, as the guide said, from the Linux terminal. Once I was in the right directory and I compute the command:
[code]..
View 9 Replies
View Related
Dec 27, 2010
I tried to compiling a code on 32-bit OpenSuSe 11.1, but it was terminated with following error: # ***No rule to make target '/usr/lib/libGLU.a', needed by 'DXA_debug'. Stop Then I installed the freeglut-2.6.0, but there were only libGLU.so and libGLU.so.1 in /usr/lib folder. And the compiling process was terminated with the same error. Will you give me some instruction to solve this problem?
View 3 Replies
View Related
Jan 5, 2011
I have tried several times, but compiling always fails.I want to compile a litte program called dwg2dxf.I think all the needed programs are installed.First I unpack the tar.gz file on my desktop. Open Terminal, enter directory, then type"./configure"Everything fine, some files are created. config.log doesnt show errors (See config.log file)."make"Some errors occurenters some directories without doing anything, thenmain.cpp:39: fatal error: iostream.h: (translation) Doesnt exist.This is the text from the terminal:
familia@familia-laptop:~/Escritorio/dwg2dxf-2.1$ make
make all-recursive
make[1]: se ingresa al directorio /home/familia/Escritorio/dwg2dxf-2.1
[code]...
View 7 Replies
View Related
Mar 2, 2011
so I am wanting to compile my own kernel to see if i can get my laptop to run a lill better. I found the how too's to do the compile, but what I want to know is.. what is the most complete way to find all the hardware and such that is in my laptop so i can build all the support into the kernel that i need and leave out EVERYTHING i dont need.
i figured lspci is a start but there has to be more info somewhere to find the exact needs of the laptop.
View 7 Replies
View Related
Apr 11, 2010
Im having problem compiling kernel I used these commands
#make menuconfig
#make-kpkg clean
#fakeroot make-kpkg --revision=custom.1.0 kernel_image
[code]...
View 3 Replies
View Related
Mar 15, 2010
I am trying to compile web polygraph 4.0.9 on Linux ES 3 and face the following error. how to have the following error resolved?
[root@Orchid polygraph-4.0.9]# make
make all-recursive
make[1]: Entering directory `/home/andy/polygraph-4.0.9'
Making all in .
make[2]: Entering directory `/home/andy/polygraph-4.0.9'
make[2]: Leaving directory `/home/andy/polygraph-4.0.9'
[Code]...
View 5 Replies
View Related
Mar 7, 2010
I went from mandriva 2009 32-bit to ubuntu 9.10 64-bit and wx begins to act up..
the simple program from the wx hello world tutorial build fine on my old system, but not my new on. I got the packages installed (wx2.8.10-dev, headers and whatnot)
I've looked around a bit and it seems the compiler is not including the files correctly..
Compiler command:
Code:
g++ k.cpp `wx-config --libs` `wx-config --cxxflags` -o morten
Compiler output sample (because most of it is because of first errors):
Code:
k.cpp:9: error: invalid use of incomplete type struct wxFrame
/usr/include/wx-2.8/wx/utils.h:50: error: forward declaration of struct wxFrame
k.cpp:12: error: ISO C++ forbids declaration of wxPoint with no type
k.cpp:12: error: expected , or ... before & token
[Code].....
View 5 Replies
View Related
