OpenSUSE :: Compiling XEN 4.0 From The Sources In 11.2.
Jun 9, 2010
I'm trying to build the latest XEN 4.0.0 from the tarball in xen.org.
After resolve the dependencies, I finalled compiled the xen kernel.
But the problem, it is not making the intrd for booting (and it is not suposed to do ), it just comments the following on the README source:
Depending on your config, you may need to use 'mkinitrd' to create an initial ram disk, just like a native system e.g.
# depmod 2.6.18-xen
# mkinitrd -v -f --with=aacraid --with=sd_mod --with=scsi_mod initrd-2.6.18-xen.img 2.6.18-xen
[Code].......
I really want to test the pastrough and snapshot new features in XEN, since i really start to hate vmware eating all resources with more than 1 vm (I know, there is VirtualBox, but I used Vmware first since you can record videos and for portability).
I already used XEN 3.4 a lot in my own labs inside my laptop, (since I learned how to use virtual network in nat mode), and since is the default hypervisor on the job (we are migrating the lasts Vmware vms !!! cool!!! ) and I really really love XEN (is amazing, 4 vms, 1 host in a laptop turion 64 x2 with just 3GB ram!!! and my processor is not flaming!!!).
View 1 Replies
ADVERTISEMENT
May 10, 2010
Is there any way to install a kernel using rpms and avoid compiling its sources? I am using OpenSUSE 11.2.
View 7 Replies
View Related
Oct 25, 2010
It has been years since I have need to compile the kernel or its modules. Here goes: I recently upgraded to ubuntu 10.10 and needed the kernel source and its modules source. The relevant directories are in a mess. Several diff versions, broken links, the works. Is there a nice easy way, to remove all of the sources, there, and err "install" the ones for my latest kernel, in the correct places. Then I might have a chance at getting the two modules I need complied! Nvidia being one for the geforce 4 mx420 nv17
View 4 Replies
View Related
Feb 25, 2010
When compiling software I get the following notice : You do not appear to have the sources for the 2.6.31.5xls-domU kernel installed.
Yum says :
Package kernel-headers-2.6.18-164.11.1.el5.x86_64 already installed and latest version
Package kernel-devel-2.6.18-164.11.1.el5.x86_64 already installed and latest version
But uname says :
Code:
-bash-3.2# ls /usr/src/kernels/
2.6.18-164.11.1.el5-x86_64
-bash-3.2# uname -a
Linux vds.hosting.net 2.6.31.5xls-domU #4 SMP Fri Dec 4 12:17:04 CET 2009 x86_64 x86_64 x86_64 GNU/Linux
Extra info :
title CentOS (2.6.18-164.11.1.el5xen)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-164.11.1.el5xen ro root=/dev/xvda1 console=xvc0
initrd /boot/initrd-2.6.18-164.11.1.el5xen.img
This is a VDS I'm renting from my Hosting company. How can I get the right sources? RPMforge repo?
View 10 Replies
View Related
Apr 18, 2010
I want to compile a kernel to add a few options that are not enabled in the huge-smp-2.6.29.6 that comes with slackware. specifically, i want to add TASK_DELAY_ACCT and TASK_IO_ACCOUNTING so that I can use iotop. I just want to add those 2 options to the new kernel, everything else I'd like to keep the way it is as the system has been running just fine. Will running 'make menuconfig' in /usr/src/linux default to the options that are used in the stock kernel?
View 3 Replies
View Related
Apr 28, 2010
I have this problem constantly and it tells me to install such and so a prog, but I do locate [prog] and it shows up in 80 places so it's obviously installed. I just have no clue how to attach the two or to set up anything in the ./config set up so it leaves me completely stuck. So what's the trick when it's already in there? Also..it says I just joined? in 2008.
View 5 Replies
View Related
Apr 8, 2011
I am trying to compile a patch for HDMI audio, reference this thread [URL]
Code:
Instructions:
- download alsa-driver-1.0.21 from alsa homepage
- unpack downloaded alsa:
$ tar jxvf alsa-driver-1.0.21.tar.bz2
- download and apply my patch
$ wget http: [URL]
$ cd alsa-driver-1.0.21
$ patch -p 1 < ../alsa-driver-1.0.21-nvidia-ion2-hdmi.patch
- compile alsa
$ ./configure
$ make
$ make install
when I do ./configure it outputs this
Code:
The file /lib/modules/2.6.33.7-pclos6.bfs/source/include/linux/autoconf.h does not exist. Please install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /lib/modules/2.6.33.7-pclos6.bfs/source). How can I direct it to install with the 'full kernel sources' ?
View 8 Replies
View Related
May 16, 2011
I've got the following problem: I just noticed that there were just very few notifications about updating the system (usually there are damn many of them in a week) So I opened the update manager and clicked on "refresh list". The following result popped up: p,li{white-space:pre-wrap;}E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found First I thought, it would be just some kind of server problem, but it didn't stop. The next thing was to research the thread and I even found something. However, the solution suggested didn't work at all. (Things, which might have caused this: I installed the default software center |I'm using Kubuntu, but in this case that fact doesn't matter| and used it. To sum up:
- not able to update the system referring to the launchpad main sources for 11.04
- following error: E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found It would be great if this was a common issue and I've been simply too stupid to find a proper solution. So you could just post the link.
View 2 Replies
View Related
Apr 21, 2010
I am running Jolicloud on my netbook (which I believe is an Ubuntu derivative) and I am tried to enter the getdeb.net sources in so I can install apps from the website through APT but
1) When I entered the sources into sources.list and then the key into Terminal and then went to the site and tried to install an app it didn't work.
2) I deleted the line of code in the sources.list file and when I opened terminal and entered "sudo apt-get update" it showed the list of sources, but on the list were Getdeb.net sources.
My question is how do I delete sources that aren't in /etc/apt/sources.list ?
View 6 Replies
View Related
Aug 28, 2009
I am installing a hp officejet pro 8500 all in one printer to knoppix 6.0.1. install hangs saying i need to disable cd sources in etc/apt/source.list. How do i do this?
View 1 Replies
View Related
Dec 30, 2010
Trying to install VMWare I get the following message:
Really after it VMWare anyway doesn't agree to install. Zypper says that no newer version of gcc is available. So I can't see how I can install VMWare.
View 9 Replies
View Related
Feb 22, 2010
I'm a new linux user and I'm trying to install some files from a .tar.gz archive. I have successfully created a repository in a directory using createrepo, but I can't figure out how to add am installation source to YaST.How is it done in 11.2?
View 2 Replies
View Related
May 29, 2010
There is no audio output to the speakers when listening to, or while recording from Line-in. Enabling software sound playthrough in Audacity did not help. Audacity simply froze. But I can make fine recordings from Line-in and play the recorded files. Also no sound from cd-audio. KsCD begins playback, but no sound. Only VLC works with cd-audio. Maybe some slider settings that I missed? This is what I did so far: Advanced Linux Sound Architecture Driver Version 1.0.20
00-00: CMI9880 : CMI9880 : playback 1 : capture 2
00-01: CMI9880 Digital : CMI9880 Digital : playback 1 : capture 1│
louis@linux-6ozx:~> cat /proc/asound/modules
[code]....
View 3 Replies
View Related
Aug 25, 2010
i'm using optical s/pdif output, called "hda intel, ad198x digital (iec958 (s/pdif) digital audio output)" in phonon preferences. sounds works just fine -- except i can't use multiple audio sources simultaneously: for example amarok+videos is a no-no. only the first audio source plays, so i have to close amarok in order to listen to any flash videos. i had this problem already with opensuse 11.2, but couldn't figure it out (using 11.3 now).
i just recently got a hunch that it might have something to do with mixing and the s/pdif, and i tried using analog output ("hda intel (ad198x analog)"). lo and behold, it works! amarok+flash that isash still doesn't still consider this a major leap forward.however, i'd like to keep using my optical output.
View 1 Replies
View Related
Aug 8, 2011
I am trying to install gcc4.1.1 upon my opensuse machine which already has gcc 4.5 installed but I want an earlier version.
1) I downloaded gcc-4.1.1.tar.bz2
2) Extracted the contents
3) When I tried to run the command "./configure" on terminal its giving error "configure: error: can not find sources in . or ..". However I can see the configure file in the directory. Below are the files present in directory.
[Code]....
View 9 Replies
View Related
Dec 6, 2010
I was reading the following forum guide:openSUSE software installation hints So I decide to install from the souce code the following webcam application:
GTK+ UVC Viewer In order to avoid problems ( it is my first installation from souce code) I downloaded and unpacked everything in an USB key and I worked from, as the guide said, from the Linux terminal. Once I was in the right directory and I compute the command:
[code]..
View 9 Replies
View Related
Dec 27, 2010
I tried to compiling a code on 32-bit OpenSuSe 11.1, but it was terminated with following error: # ***No rule to make target '/usr/lib/libGLU.a', needed by 'DXA_debug'. Stop Then I installed the freeglut-2.6.0, but there were only libGLU.so and libGLU.so.1 in /usr/lib folder. And the compiling process was terminated with the same error. Will you give me some instruction to solve this problem?
View 3 Replies
View Related
Jul 28, 2010
today I tried to run desktopdrapes. my first command ./configure was completet after I installed the missing pakages. the next step is the 'make' command. But with this command I get 5 Errors and 2 Warnings:
Code:
e-Lasto:/home/carolin/programme/drapes # make
Making all in drapes
make[1]: Entering directory `/home/carolin/programme/drapes/drapes'
/usr/bin/gmcs -debug -r:System.Xml -r:Mono.Posix -pkg:gconf-sharp-2.0 -pkg:glade-sharp-2.0 -pkg:gnome-vfs-sharp-2.0 -resource:../data/drapes.glade,drapes.glade
[Code].....
View 4 Replies
View Related
Jan 1, 2011
I use Workrave on Windows to make sure that I walk away from my computer every now and then, but I can't find it in openSUSE's repositories although it is available for Linux.
Then I tried compiling it from source, but I got this error...
pdedecker@linux-s6cn:~/Desktop/workrave-1.9.3> ./autogen.sh **Warning**: I am going to run `configure' with no arguments. If you wish to pass any to it, specify them on the `./autogen.sh' command line.
Running intltoolize...
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
[Code].....
Is Workrave incompatible with KDE4? Is openSUSE using a different windowing system?
I'm willing to try similar software packages if they're easier to install.
View 9 Replies
View Related
Mar 10, 2011
Compiling ghostscript (9.01 or older) on a SUSE-11.3 does not include the x11 devices.gs -h does not show x11, x11alpa, x11mono, etc.Compiling on an old SLES-9.3 all x11 devices are included.On the old SLES-9.3 there is a library /usr/X11R6 with subdirs lib and include.Apparently including x11 devices depends on the libraries in /usr/X11R6.Question 1: how do I compile ghostscript on suse-11.3 with x11 devices included? The option --with-x does Question 2: where can I get the appropriate /usr/X11R6 for SUSE-11.3?
View 1 Replies
View Related
Jun 25, 2010
I am trying to install a software but I get error as under -
[Code]...
View 9 Replies
View Related
Dec 15, 2010
I am having problems with my touchpad on my dv7 notebook, that I can not resolve... so I thought it would be a good idea to update the gpointing-device-settings that came with the opensuse 11.3 repositories (version 1.3.1-1.2 too old maybe)
So I downloaded the source files but when I try to ./configure, I have some errors telling my that my gtk+ and gnome-settings-daemon versions are older (that is not true, I check them and they are newer)
Here is the ./configure output:
Code:
damususe:/home/sebadamus/Downloads/gpointing-device-settings-1.5.1 # ls
aclocal.m4 configure libgpointing-device-settings.pc.in modules
autogen.sh configure.ac ltmain.sh NEWS
ChangeLog COPYING m4 po
[Code]....
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.
Alternatively, you may set the environment variables GNOME_SETTINGS_DAEMON_CFLAGS
and GNOME_SETTINGS_DAEMON_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
damususe:/home/sebadamus/Downloads/gpointing-device-settings-1.5.1 #
View 7 Replies
View Related
Feb 26, 2010
I am having some issues compiling kernel modules against the pre-built OpenSUSE kernel. Whenever I compile a module and try to load it, I get something like:
Code:
insmod fs/smbfs/smbfs.ko
insmod: error inserting 'fs/smbfs/smbfs.ko': -1 Invalid module format
It doesn't actually matter what the module is, they all do the same thing. I have tried the above mentioned smbfs, I've also tried:vmware kernel module
[Code]...
View 9 Replies
View Related
Jan 27, 2011
I need a cross compiler for C/C++.
Unfortunately, I can't find the GCC cross compiler in the repositories.
There is only a package with the binutils: cross-ppc-binutils
But nothing like: cross-ppc-gcc
View 1 Replies
View Related
Feb 21, 2009
I tried to install dropbox on my openSUSE 11.1(KDE 4.0) from a tar.bz2. After i extracted it to a folder Dropbox in Desktop.
I got this error trying to compile.
View 9 Replies
View Related
Mar 11, 2011
Compiling Amarok from git gives error "gdk-pixbuf/gdk-pixbuf.h: No such file or directory" it is installed in /usr/include/gtk-2.0/gdk.I just up'ed to openSuse 11.4 and KDE 4.6.1 - compiled fine last time I tried which was probably last weekend or so (March 2nd or third)Wondering if /usr/include/gtk-2.0/ is new in 11.4 because of the upcoming gtk3.0 and the problem is it's not some path and not being compiling proficient I'm a bit lost.full error
Code:
/home/smiley/MyTemp/amarok/src/core-impl/collections/ipodcollection/handler/IpodHandler.cpp:35:35: fatal error: gdk-pixbuf/gdk-pixbuf.h: No such file or directory
[code]....
View 1 Replies
View Related
Nov 28, 2009
I downloaded the Dlink wireless G dwa-110 usb driver but I'm getting "rt73.ko failed to build. make[module]error 1" when compiling it.
I have installed the kernel-source and kernel-syms but I still get the same error. What am I doing wrong?
I'm running openSuSE 11.2 64 bit.
View 4 Replies
View Related
Feb 23, 2010
I am trying to install the Reading People Tracker release 1.28 in Open Suse 11.2 and, after some solved errors installing external libraries for mathematics, XML and graphical display, I stuck compiling the Reading People Tracker. It shows a lot lot of errors like:
Code:
In file included from /usr/include/c++/4.4/string:56,
from /usr/include/c++/4.4/bits/locale_classes.h:42,
from /usr/include/c++/4.4/bits/ios_base.h:43,
from /usr/include/c++/4.4/ios:43,
from /usr/include/c++/4.4/istream:40,
from /usr/include/c++/4.4/fstream:40,
from ../RGB32Image.cc:12: .....
View 1 Replies
View Related
Jul 17, 2010
I Currently have the problem of not being able to install xmms on suse 11.3, apparently since there's no way to install it from the packman repos because xmms claims it's missing glib 1.22 -oh yeah that one. But since it worked like a charm on 11.2 i'm just wondering if the glib, gtk, and gdk rpms will be present in the future or have i just missed something. I've tried to compile gtk 1.2 and above on 11.3 but since it is a 64bit system it do not comply with my request.Output from glib-1.2.2 and 1.2.10
Code:
checking host system type... Invalid configuration `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized
checking build system type... Invalid configuration `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized
and what's missing for xmms
[Code]...
If anyone could give me a tip on how to compile the old 32bit gtk libs on a brand new 64bit system would be much appreciated. Or if there is an even simpler way please tell i.e if there is any repos hosting what i need. Greets
View 3 Replies
View Related
Jul 6, 2010
I have a Wireless PCI-Express Adapter which I wish to install the drivers, though am having difficulty. The chipset on my card is a Ralink. I have visited the Ralink Website Ralink corp. and downloaded the RT2860 Wireless Lan Linux Driver version 2.3.0.0. I have extracted the files within my home directory. I have read the readme file, and from what I understand I have needed to do... I have typed in the Make command as a "super user". Unfortunately I have had no success and it states the following output.
[Code]...
View 4 Replies
View Related
