Fedora :: Error Compiling 2.6.33.2
Apr 7, 2010I am trying to compile kernel 2.6.33.2 (without problems 2.6.33.1), but i got the following message :
[code]...
I am trying to compile kernel 2.6.33.2 (without problems 2.6.33.1), but i got the following message :
[code]...
Im trying to install the latest stable release of Samble but I am recieving errors during the make process.
Also is there and ezier way to install samba than compiling from source?
Forgot to mention i cannot use yum because this computer cannot be connected to the internet.
I am cross compiling a linux kernel for the mips platform. I have installed the tool chain and everything. When i try to build the kernel i get the following error message.
HOSTCC -static scripts/basic/fixdep
scripts/basic/fixdep.c: In function traps
scripts/basic/fixdep.c:377:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
scripts/basic/fixdep.c:379:4: warning: dereferencing type-punned pointer will break strict-aliasing rules
[Code].....
If i set up the toolchain on a fedora 13 machine with the exact same procedure, the cross compilation works fine. I can't figure out how this can be fixed. I am currently considering downgrading to fedora 13 due to this.
I get an error while compiling in Eclipse:
*.o: file not recognized: File truncated
I tried to remove all the .obj and .moc folders and make clean but can't solve the problem! Maybe I'm missing something here.
On compiling open-vm-tools-8.4.2-261024 on Fedora 13 x86_64. When I run make, it failed on stage 2 with these error messages:
I think I have to compile these modules into the kernel.
I tried to compile Atheros AR8152 PCI-E Fast Ethernet Controller driver for fedora 13 64 bit kernel version is 2.6.34.7-56.fc13.x86_64. I have installed kernel source , kernel header and necessary all things to compile it. (linux-firmware-20100806-4.fc13.noarch also installed). I tried AR81Family-linux-v1.0.1.13 source from Atheros web site.
But when I try to make it it give following error.
Code: Makefile:173: *** *** Aborting the build. ***
This driver is not supported on kernel versions older than 2.4.0. Stop. It is not compiling issue because I compiled and installed broadcom wireless driver.
Makefile is attached here (renamed as Makefile.txt -> Makefile)
Downloaded the stable kernel 2.6.36.4 from kernel.org/ (Current Kernel:2.6.18-92.el5) However i have extracted the source code .ran make mrproper copied the old configuration file and selected it by using make menuconfig .However after selecting it and clicking ok i m getting following error.
Code: .
config:656:warning: symbol value 'm' invalid for IP_DCCP_CCID3
.config:657:warning: symbol value 'm' invalid for IP_DCCP_TFRC_LIB
#config:1353:warning: symbol value 'm' invalid for FIXED_PHY
# configuration written to .config 'm' invalid for IWL4965
[code]....
Im having problem compiling kernel I used these commands
#make menuconfig
#make-kpkg clean
#fakeroot make-kpkg --revision=custom.1.0 kernel_image
[code]...
My system is a fc 12 using a 2.6.33.1 kernel from kernel.org ... i've prefer compile by myself to get a minimal kernel ( i got a old p4 a 1,6ghz 2gb ram) but i got fedora kernels from updates too I am trying to compile a kernel from www.kernel.org, linux-2.6.33.2 full .. i made the same with 2.6.33.1 and all ok I got kernels from fedora distro (kernel-devel and kernel-headers installed) and kernel.org I dont know why about directory paths and files ... why make finds it? ... i think that linux-2.6.33.2.bz2 include all needed how to configure the install path ? ... if i am using /usr/src/kernels/linux-2.6.33.2 and all bzip2 extracted into it ... i can't see "configure" tool I am trying to compile kernel 2.6.33.2 (without problems 2.6.33.1), but i got the following message :
[code]....
i encountered this problem when compling the tcl code, i am not sure where went wrong, did i miss any library or component?
num_nodes is set 20
INITIALIZE THE LIST xListHead
invalid command name "Agent/UDP/PDP"
while executing
"Agent/UDP/PDP create _o30 "
[Code].....
I am compiling Xchat and when I was 'make install' I get this error and yes I am root.
Code:
make[2]: *** [fe-gtk.o] Error 1
make[2]: Leaving directory `/home/mark/build/xchat-2.8.6/src/fe-gtk'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/home/mark/build/xchat-2.8.6/src'
make: *** [install-recursive] Error 1
I am trying to compile a simple remote procedure call program. I am getting an error:
/tmp/ccy0M5rT.o: In function 'main':
rpchighlayer.c.text+0x5c): undefined reference to 'rnusers'
collect2: ld returned 1 exit status
Code:
#include <stdio.h>
#include<stdlib.h>
main(argc, argv)
int argc;
char **argv; {
int num;if (argc != 2) {
fprintf(stderr, "usage: rnusers hostname ");
exit(1);
} if ((num = rnusers(argv[1])) < 0)
{fprintf(stderr, "error: rnusers ");
exit(-1);
} printf("%d users on %s
", num, argv[1]);
exit(0); }
I am using Fedora 11 (2.6.30.10-105.2.23.fc11.i686.PAE). I got a patch for tpm_tis.c which a module to get my itpm working. And, for this I thought to customise the existing kernel and install new one.
So, I followed the foolowing steps:
In 'make menuconfig' , I have disabled Kernel debugging in the Kernel hacking section.
Then changed EXTRAVERSION to something like .test in Makefile
And, My Idea is to follow these steps:
I'm currently using Fedora 12 with kernel 2.6.31.9 and I was trying to upgrade to 2.6.32.2. These are the steps I followed. After rebooting and choosing this kernel from the Grub menu, I'm just greeted with a black screen with a blinking cursor and it won't proceed beyond that.
These are the commands I issued. I received an error on the first make modules about the mismatch. I then ran CONFIG_DEBUG_SECTION_MISMATCH=y and once finished I ran make modules again and it completed successfully.
Code:
Downloaded kernel package 2.6.32.2 from www.kernel.org
untar archive
make menuconfig (no changes made, saved config file)
make
[Code]...
New to this kernel stuff But not too new to C/C++. I'm trying to compile the linux kernel on a PC, that is running Windows XP 32 bit, using Cygwin. I keep getting the error saying:
Error: Not ELF
make[2]:*** [scripts/mod/elfconfig.h] Error 1
make[1]:*** [scripts/mod] Error 2
make:***[scripts] Error 2
Every time I try to compile it from the main directory of the source, which I hope is what I'm supposed to do, I always get this.
I have tried to compiled e2fsprogs-1.41.12 to be used on my android device that runs linux kernel. I need to compile it with -static option but building returns error First is the configure:
[Code]...
When I compiling gdb for ARM processor I am getting this error as:
Code:
checking for iconv declaration... install-shextern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for library containing waddstr... no
configure: WARNING: no enhanced curses library found; disabling TUI
checking for library containing tgetent... no
configure: error: no termcap library found
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/mnt/freescale/sources/gdb-7.0'
make: *** [all] Error 2
sharief@sharief-desktop:/mnt/freescale/sources/gdb-7.0$
What will be the error. I think the termcap library is not there. I downloaded and cross compiled tremcap library but still it is not working.
I em trying to compile fop-1.0 on Slackware64 13.1. I have ant 1.8.1 Slackware package.
Here is the output of ant build:
Code:
I'm trying to install squidGuard-1.4, I have a minimal install. I have installed squid-3.2.0.5 without any problems, but squidGuard is driving me crazy
I can run the ./configure with no problems but when I run make, or make install I keep getting this error:
Code:
make: *** [y.tab.c] Error 141
And that is is all, no more verbosity or anything else.
Error suggests that YACC is missing but bison is present, also db4 (tried with db44 and db3, same story).
Just in case you can see anything I cannot I've attached the config.log
I got an error that header file sys/ddi.h , did the system is missing something
View 2 Replies View RelatedI'm trying to build a package from wine 1.3.18 following Soul Singin's post here but it gives me this error.
wine: configuration in '/home/user/.wine' has been updated.
wine: cannot find L"unix\tmp\wine-1.3.18\dlls\advapi32\tests\advapi32_test.exe.so"
make[2]: *** [cred.ok] Error 2
make[2]: Leaving directory `/tmp/wine-1.3.18/dlls/advapi32/tests'
[Code].....
This error only appear when I use dpkg-buildpackage not when I compile the source it with make.
I am trying to install a software but I get error as under -
[Code]...
I tried to compile the latest VLC as the instruction of [URL]... except that giving configure option '--enable-vaapi' when compiling ffmpeg.But, i got below error messages, and don't know what to do. My system is as follows.
[code]...
Usually when a compile doesn't work, the error message indicates a missing dependancy, and it's pretty straightforward. This came up while trying to install arts-1.5.10 for KDE 3.5
Code:
mcoputils.cc:74: error: 'PATH_MAX' was not declared in this scope
mcoputils.cc:91: error: 'kde_tmp_dir' was not declared in this scope
[code]....
I've been around the block with this problem and don't know what else to check to compile source for gpsbabel-1.4.2. Other posts on this forum mentioning the same error with no resolution on this specifically. I have looked at the following:
1. The Makefile looks like this for the part compiling with expat options:
Code:
gpsbabel$(EXEEXT): configure Makefile $(OBJS)
$(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) -lm -L/lib -lexpat -L/usr/lib -lusb $(OUTPUT_SWITCH)$@
2.Search for library files:
Code:
$find /usr/lib -type f -name "*expat*" -print
/lib/libexpat.so.1.5.2
/lib/libexpatw.so.1.5.2
[code]....
I update my last kernl to 2.6.38-rc7 but when I launch VirtualBox, on stdout.The vboxdrv kernel module is not loaded. Either there is no module available for the current kernel (2.6.38-rc7) or it failed to load. Please recompile the kernel module and install it by sudo /etc/init.d/vboxdrv setup.
View 1 Replies View RelatedI am trying to compile binutils 2.15.92 package on RHEL 5.4, which is required with gcc 3.4.6 version. I have already installed gcc 3.4.6 on /opt/gcc.
I have given the --prefix as /opt/binutils during compilation. I have all flex, bison and m4 packages installed.
I am getting following error during compilation..
Code:
root/binutils/binutils-2.15.92.0.2/binutils/bucomm.c:425: warning: the use of `mktemp' is dangerous, better use `mkstemp'
ar.o: In function `mri_emul':
ar.c:(.text+0x9f2): undefined reference to `yyparse'
[Code]....
My asterisk version is 1.6 and Web-MeetMe is 4.0.2 I get the following upon issuing "make" in web-meetme/cbmysql/ :
Quote:
cc -pipe -I/usr/include/mysql -L/usr/lib/mysql -fPIC -I/usr/src/asterisk -D_GNU_SOURCE -I/usr/include/mysql -c -o app_cbmysql.o app_cbmysql.c
app_cbmysql.c:14:22: error: asterisk.h: No such file or directory
app_cbmysql.c:25:33: error: asterisk/autoconfig.h: No such file or directory
app_cbmysql.c:26:27: error: asterisk/lock.h: No such file or directory
[Code]....
I want to compile Firewalk in cygwin, But error compiling libnet occur:
Firewalk-0.99.1 #./configure
loading cache ./config.cache
checking host system type... i386-pc-cygwin32
checking target system type... i386-pc-cygwin32
checking build system type... i386-pc-cygwin32
checking for gcc... gcc .....
checking for PacketSetMode in -lpacket... no
configure :erroracket lib not found
What is "Packet Lib"? I have compile Plib Package, but the this error occurs again!
I was doing a compilation of NSS to upgrade it because NetworkManager needs >= NSS 3.1.1, but it gave this error:
%gmake moz_import
../coreconf/ruleset.mk:226: *** missing `endef', unterminated `define'. Stop.
It pops up another error saying there is no Linux2.6.3.3.mk in the folder, but I managed to get it working. I was using this site to compile it : Link