I am having memory problems on my old Compaq PC, and am trying to run memtest86+-4.20 to check it. I downloaded the source file, and tried a compile, but had the following problem:
I've download the gpac files for MP4box from:[URL]..but im having issues compiling it. Its telling me "gcc: error: unrecognized option '--warn-common'"Running 64bit FC 15
This started happening about 2-3 weeks ago when i noticed our backups weren't running anymore. whenever i try to run ANY type of scp command I get the following error: warning: Unrecognized configuration parameter permitlocalcommand ssh: FATAL: Illegal -o parameter "PermitLocalCommand no" lost connection
I checked the /etc/ssh/ssh_config file and there was a command PermitLocalCommand commented out, but for testing I even totally removed that line and then in scp forced the use of that file via scp -F /etc/ssh/ssh_config ......
and I still get the same error. This command is nowhere is any of my ssh config files so im at a loss here on how im supposed to fix this!! I even checked my home directory for maybe a ssh config file that might be overridding the system config but nothing.
$ ls one.tar.gz one.tar.gz $ tar -xvfz one.tar.gz tar: z: Cannot open: No such file or directory tar: Error is not recoverable: exiting now $ tar -xvzf one.tar.gz one $ tar -xzvf one.tar.gz one $ tar -zxvf one.tar.gz one $
I am having a problem with running the mplayer dvdnav option from the command line or terminal. I run the command and this is what I get:
mplayer -nocache dvdnav://1 /media/CDROM /dev/scd1 MPlayer SVN-r1.0~rc3+svn20090426-4.4.3 (C) 2000-2009 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.
Playing dvdnav://1. No stream found to handle url dvdnav://1 Playing /media/CDROM. File not found: '/media/CDROM' Failed to open /media/CDROM .....
I went on the forums and they say that some of the packages built to support dvdnav are out of date and that they should be updated. By the way I am running ubuntu 10.04 lucid lynx with lxde as my desktop manager.
I'm using linux suse 9.3. Recently i try to run execution files but it shows an error try running with the option "-console" or "-silent" When I tried with the -console option, I got the error - The wizard cannot continue because of the following error: Invalid command line option: console is not supported (1001) (403)
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
I installed exim4 package on my debian server as MTA. Now I want to send mail with this by SMTP. But when I connect to this via telnet, it returns this banner:
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
I install software called Sunflow v0.07.2 in my Ubuntu. When I try to run it,it says "API error : JVM available memory is below 800 MB (found 728 MB only). Please make sure you launched the program with the -Xmx command line options". What is that xmx command line.What should i do to run Sunflow.
I am not familiar with Linix server, I have installed ubuntu server for study purpose. Now I am facing problem when I install openssl from command line. This is the error message:
openssh-server : Depends: libwrap0 (>=7.6-4~) but it is not installable E: Broken packages
I have copied over my .gnupg files from a computer to a new workstation that is running Mandriva 2010.2. I am running Thunderbird as a mail client just as before and got Enigmail installed and running fine. The problem I get is when I send a message off with a digital sig it returns this error:
Send operation aborted Error - bad passphrase gpg command line and output: /usr/bin/gpg gpg: cancelled by user
It does not give me a chance to enter in the passphrase. I copied over the .gnupg files to my Ubuntu laptop running Thunderbird with Enigmail and I have no problems. Could there be an issue going from 32 bit to 64 bit? I checked out the forums and found no answers.
how to login through cmdline in grub.I tried some of codes but failed.codes were-grub>set root=(hd0, grub> linux /vmlinuz root=/dev/(sda, ro error;no such disk
I've been familiarizing myself with the command line and am attempting to connect to a wireless network but am getting stuck at the point wherein I need to put in a password.When I run iwconfig I see my card is wlan0.I definitely know my password as I can connect using a GUI. The encryption method for my network is WPA2.Could someone tell me how I could connect to a WPA2 secured network via a command line, and/or where I went wrong with what I've been trying?
I'm having, oddly enough, stability problems on my main slackware desktop. Whenever I try to do certain things, for instance going fullscreen on a flash video, starting regnum online or open arena, it drops out of X into the command line with a few error messages (next time it crashes I'll post the messages). On occasion, it'll do that without any input. Now, there's a few major changes I've had on the desktop since yesterday, chiefly that I've been able to connect it to the net for the first time in a few months. Now because of this, I've been installing plenty of software from slackbuilds, plus flash from adobe (necessary evil). I'm using xfce with some compositing on a geforce Ti 4200 AGP 8x 64Mb with nvidia drivers installed and dual monitors, each now set to 1280x1024 and in twinview, pentium 4 2.8Ghz, 1 GB ram. HDD has a 70GB ext3 slack partition, triple booting with 80GB ext4 ubuntu lucid partition and 40GB ext4 mint isadora.
When I open a gtk app from the command line this error pops up:
Code:
Gtk: Unable to locate theme engine in module_path: "clearlooks", and I can not find clearlooks theme engine anywhere as it is supposed to be part of gtk by default?
I have installed package tigervnc-1.0.0-3.fc12.i686, but when I am trying to start it: service vncserver start it comes back with following message: vncserver: unrecognized service.
I am very new to shell scripting.How does one pass a command-line parameter to a shell script?for the below program #/bin/bash mount -t cifs -o user=ramkannan,password=Linux123@ //10.200.1.125/ramkannan /MT cd /MT/test date=`/bin/date "+\%Y-\%m-\%d-\%H-\%M-\%S"` mysqldump -uroot -pram2@ employeedb > $date.sql gzip $date.sql
I want to pass parameter for everything,i tried in google and did but iam getting error while passing parameter to all
#/bin/bash mount -t cifs -o user=$1,password=$2 //10.200.1.125/ramkannan /MT cd /MT/test date=`/bin/date "+\%Y-\%m-\%d-\%H-\%M-\%S"` mysqldump -uroot -pram2@ employeedb > $date.sql gzip $date.sql
i was getting error while passing parameter to all.
i dont know if this is the right section for this but i installed linux after i installed windows server 2003 and some how the grub loader got messed up and wouldnt show, only windows would boot. i fixed the grub loader through my live disc and when i select Other operating systems i get Error 11: Unrecognized device string. here is my fdisk -l.
Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x2c8e2c8d Device Boot Start End Blocks Id System /dev/sda1 * 1 6 48163+ 7 HPFS/NTFS /dev/sda2 7 34329 275699497+ 7 HPFS/NTFS [Code].....
i dont know if this is the right section for this but i installed linux after i installed windows server 2003 and some how the grub loader got messed up and wouldnt show, only windows would boot. i fixed the grub loader through my live disc and when i select Other operating systems i get Error 11: Unrecognized device string. here is my fdisk -l.
Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x2c8e2c8d
Device Boot Start End Blocks Id System /dev/sda1 * 1 6 48163+ 7 HPFS/NTFS /dev/sda2 7 34329 275699497+ 7 HPFS/NTFS /dev/sda3 34330 38227 31310685 83 Linux /dev/sda4 38228 38913 5510295 db CP/M / CTOS / ...
Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x99b707d2
Device Boot Start End Blocks Id System /dev/sdb1 1 38912 312560608+ 7 HPFS/NTFS
Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080
Device Boot Start End Blocks Id System /dev/sdc1 1 6 48163+ de Dell Utility /dev/sdc2 7 38227 307010182+ 7 HPFS/NTFS /dev/sdc3 38228 38913 5510295 db CP/M / CTOS / ...
