I've download the gpac files for MP4box from:[URL]..but im having issues compiling it. Its telling me "gcc: error: unrecognized option '--warn-common'"Running 64bit FC 15
View 2 RepliesI am having memory problems on my old Compaq PC, and am trying to run memtest86+-4.20 to check it. I downloaded the source file, and tried a compile, but had the following problem:
[code]...
how to get around this issue?
use gcc command to compile a *.c file error:unrecognized option '--eh-frame-hdr' why is it? and how to solution it?
View 2 Replies View RelatedAnyone else SUDDENLY getting this??? Still trying to find why this is happening...
Code:
FFmpeg version 0.6.2-rpmfusion, Copyright (c) 2000-2010 the FFmpeg developers
built on Apr 12 2011 16:45:34 with gcc 4.5.1 20100924 (Red Hat 4.5.1-4)
configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64
--mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
[Code]...
while trying to compile grace (5.1.22), I am facing problem:
Code:
$ make
make[1]: Entering directory `/home/rudra/Downloads/grace-5.1.22/
cephes'
gcc -O2 -m486 -fno-common -Wall -Wpointer-arith -Wnested-externs -I.. -
I. -c -o airy.o airy.c
cc1: error: unrecognized command line option "-m486"
[code]...
I am forced to use source because rpm is also giving some problem and crashing while starting.
I have installed php 5.3.6-4 on centOS 5.6. When i try to install some modules of php then it gives an error
php53-common-5.3.3-1.el5_6.1.i386 from updates has depsolving problems
--> php53-common conflicts with php-common
Error: php53-common conflicts with php-common
[code]....
I have reinstall it twice but each time i get same error.
I am trying to install gcc in RHEL 5.4
These is the output:
I can not install the glbic-common file cause it give me a conflicting error (the package is already install but it is somehow not recognize by the system)
After upgrading from 2.6.18-194.32.1.el5 to 2.6.18-238.5.1.el5 EXT3-fs: Unrecognized mount option "mand" or missing value
View 1 Replies View RelatedI am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
I have installed package tigervnc-1.0.0-3.fc12.i686, but when I am trying to start it: service vncserver start it comes back with following message: vncserver: unrecognized service.
View 1 Replies View RelatedI've been working to get gcc up and running on a new install of Fedora 13. glibc-devel had dependencies upon installation where it required glibc and glibc-common, both 2.12.1-3. No problem, found both at rpm dot pbone dot net. However, when I try to install the following circular dependency results... it doesn't matter the order of install.
Code:
[root AT localhost gcc_install]# rpm -ivh glibc-common-2.12.1-3.x86_64 .rpm
error: Failed dependencies:
glibc = 2.12.1-3 is needed by glibc-common-2.12.1-3.x86_64
[code]....
i dont know if this is the right section for this but i installed linux after i installed windows server 2003 and some how the grub loader got messed up and wouldnt show, only windows would boot. i fixed the grub loader through my live disc and when i select Other operating systems i get Error 11: Unrecognized device string. here is my fdisk -l.
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2c8e2c8d
Device Boot Start End Blocks Id System
/dev/sda1 * 1 6 48163+ 7 HPFS/NTFS
/dev/sda2 7 34329 275699497+ 7 HPFS/NTFS
[Code].....
This started happening about 2-3 weeks ago when i noticed our backups weren't running anymore. whenever i try to run ANY type of scp command I get the following error: warning: Unrecognized configuration parameter permitlocalcommand ssh: FATAL: Illegal -o parameter "PermitLocalCommand no" lost connection
I checked the /etc/ssh/ssh_config file and there was a command PermitLocalCommand commented out, but for testing I even totally removed that line and then in scp forced the use of that file via scp -F /etc/ssh/ssh_config ......
and I still get the same error. This command is nowhere is any of my ssh config files so im at a loss here on how im supposed to fix this!! I even checked my home directory for maybe a ssh config file that might be overridding the system config but nothing.
i dont know if this is the right section for this but i installed linux after i installed windows server 2003 and some how the grub loader got messed up and wouldnt show, only windows would boot. i fixed the grub loader through my live disc and when i select Other operating systems i get Error 11: Unrecognized device string. here is my fdisk -l.
Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x2c8e2c8d
Device Boot Start End Blocks Id System /dev/sda1 * 1 6 48163+ 7 HPFS/NTFS /dev/sda2 7 34329 275699497+ 7 HPFS/NTFS /dev/sda3 34330 38227 31310685 83 Linux /dev/sda4 38228 38913 5510295 db CP/M / CTOS / ...
Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x99b707d2
Device Boot Start End Blocks Id System /dev/sdb1 1 38912 312560608+ 7 HPFS/NTFS
Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080
Device Boot Start End Blocks Id System /dev/sdc1 1 6 48163+ de Dell Utility /dev/sdc2 7 38227 307010182+ 7 HPFS/NTFS /dev/sdc3 38228 38913 5510295 db CP/M / CTOS / ...
and here is my menu.lst
[Code]......
i downloaded backtrack 4 (final) and booted the iso onto a flash drive using unetbootin. i then changed the boot order so the flash drive was first. after i did that i got into backtrack 4 did the install.sh and now i cant boot windows 7. even after changing the boot order to default, i turn my computer on and get a message that says:
Ubuntu 8.10, kernel 2.6.30.9
Ubuntu 8.10, kernel 2.6.30.9 (recovery mode)
Ubuntu 8.10, memtest86+
Other operating systems :
Memory Test (on /dev/sda1)
Ubuntu 8.10, kernel 2.6.30.9 (on dev/sda1)
Ubuntu 8.10, kernel 2.6.30.9 (recover mode) (on dev/sda1)
Ubuntu 8.10, memtest86+ (on dev/sda1)
[Code]....
i can only boot backtrack 4 OS, i really want to know what can i do to be able to boot my windows 7 home premium os.
I have installed both Windows Xp and Fedora 12. Last time when i was working on Fedora it didn't shut down properly. Now following error occurs and finally the system sleeps.
ata1.00 : exception Emask 0x0 Sact 0x0 SErr 0x0 action 0x0
ata1.00 : BMDMA stat 0x25
ata1.00 : cmd c8/00:00:50:5a:34/00:00:00:00:00/e4 tag 0 dma 131072 1n
res 51/40:7f:d1:5a:34//00:00:00:00:00/e4 Emask 0x9 (media error)
ata1.00 : status : { DRDY ERR }
ata1.00 : err : { UNC }
end_request: I/O error, dev sda, sector 70539985 JBD : Failed to read block at offset 5884 EXT4-fs(sda): error loading journal mount: wrong fs type, bad option, bad superblock on /dev/sda8, codepage or helper program, or other error In some case useful info is found in syslog-ty dmesg | tail or so
I upgraded to testing to 2-6-39-2-amd64 successfully (from 2-6-38...), but when I start to upgrade software packages, there is an error E: postgresql-common: subprocess installed post-installation script returned error exit status 1 I tried to pkill -9 postgresql-common and restart the package upgrade, but got the same error message. Here is the dpkg.log
[Code]...
I'm not very sure when this issue started. Anyway, the system finally boots and I haven't had any further problems, but I somehow notice the booting to be a bit slower since this error appeared and I don't like watching the red letters that say "failed" every time I switch the computer on. I googled this before posting it, and other users have had this issue, but the solutions that worked for them didn't work for me.
This is the content of my /etc/network/interfaces file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
I can print through my samsung printer on ubuntu and everything through the network, but whenever I try to print through the network using Adobe Reader I get a Package cupsys-common error,?
View 1 Replies View RelatedI want to install php-soap on centos 5.2 server. When i run the command, yum install php-soap, i get the error:
php-soap-5.1.6-24.el5_4.5.i386 from updates has depsolving problems --> Missing Dependency: php-common = 5.1.6-24.el5_4.5 is needed by package php-soap-5.1.6-24.el5_4.5.i386 (updates) Error: Missing Dependency: php-common = 5.1.6-24.el5_4.5 is needed by package php-soap-5.1.6-24.el5_4.5.i386 (updates) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The php common file is not actually missing, its there with the exact name. The problem seems to be that the php-common file is installed from some other repository, thats y it is creating dependency problem. The only solution i found is to remove the current php-common file and install it again, but then lot of programs get uninstalled with it, which is y am afraid of doing that, since its a vps, and some 10 sites are working on that.
We are using LPC3250 ARM9 and LTIB for building the Linux 2.6.27.8 We have written some code to access GPIO and was working earlier with opensuse 9.0 We now have fedora 11 32 bit 2.6.30.10-105.2.23.fc11.i686.PAE When we make the program we get following errors we are using GCC3.4.5
#make -C /lib/modules/`uname -r`/build M=`pwd` modules
make -C /home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8 M=`pwd` modules
make[1]: Entering directory
`/home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8'
CC [M] /home/shekhar/samsung_lcd/gpio/char.o
cc1: error: invalid option `64'
[code]....
For F10 patched. I'm in Honduras. The local cell / Internet provider that covers Guatamala, Honduras, El Salvador, uses an HSDPA modem marked "GBC" and is also known as the "China Bird". It's a black usb stick that looks identical to the option unit, but its definitely not an option modem.
lsusb lists it as 1c9e:1001 with no text after it. It automounts as a disk drive with typical Windows software on it. Nothing ever shows up in /dev/ttyUSB*, as I believe the disk mount causes it to not try mounting it as a modem. Dismounting it also does no good.
i got a new installation of grub after installing fedora. now they won't show up in grub and when i see them in disk utility, and other software, they say unrecognized partition
---------- Post added at 07:21 PM CST ---------- Previous post was at 07:13 PM CST ----------
is there a software for linux that would fix this?
---------- Post added at 07:23 PM CST ---------- Previous post was at 07:21 PM CST ----------
does anybody know if partition table doctor will fix this?
Im using centos. I have install rpm for mysql
But when i have enter service mysqld start it shows mysqld: unrecognized service
And when I type mysql it shows ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
Debian Lenny Gnome
Intel Celeron, 1100MHz, 512k
Earlier today I downloaded a video of a Mozilla Project preview, in MP4. Of course, it won't play. All I get is the audio, and this error:
Quote:
"An error occurred. The playback of this movie requires a H.264 decoder plugin which is not installed."
I put in some time, researching this issue, trying to figure it all out. I guess I'm looking in the wrong places. Is this a proprietary format issue? Also, when I was overdosing on XP, my media drug of choice was Klite mega codec pack (from codecs.com). It literally plays every media format, audio and video. In addition to fixing the above issue, can somebody guide me to an equivalent player with codecs for [insert any media type here]? I have several Terrabytes of various video and audio files, and prefer to not convert them all.
I just installed ubuntu 10.10 x64 It worked okay for awhile, but now everytime I startup I get this error message:
GConf error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See http... (Details-1:Server ping error:IDLmg.org/CORBA/CoMM_FAILURE:1.0)
So my desktop is basically worthless (Can't vnc in, windows have no title bar, can't launch anything)
root@linux-laptop:/home/linux# service iptables status iptables: unrecognized service
View 5 Replies View Relatedi got a new installation of grub after installing fedora. now they won't show up in grub and when i see them in disk utility, and other software, they say unrecognized partition how do i fix the hdd?
View 1 Replies View RelatedWe'll yesterday I got a new server and just installed Linux Debian. The thing is it's been so long (for over 5 years) that was the last time I set up virtualhosts in apache. The thing is I googled around a bit and supposedly my virtualhosts are OK, but I get this WARN when I restart apache2:
[Code]...
Whenever I try to install or remove a program, I get the following error
Code:
dpkg: warning: files list file for package `libavahi-common-data' missing, assuming package has no files currently installed.
dpkg: warning: files list file for package `libgtk2.0-common' missing, assuming package has no files currently installed.
dpkg: warning: files list file for package `libxres1' missing, assuming package has no files currently installed. (Reading database ... 55%dpkg: unrecoverable fatal error, aborting: files list file for package 'ubuntu-mono' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2)