I like using KDE, however, the browser (Konqueror) has serious problems on those few, most important sites which I must visit daily.I have JAVA and Flash installed, which work fine, but many sites appear with odd artifacts.Is there some way to fix the browser so that it can load these sites correctly? Can I install an alternative HTML layout engine?Is this only a problem on Debian's KDE? Should I try another distribution
View 14 Replies
I've just done a clean install of F14.have a wired ethernet connection (no wifi).Initially, I was able to browse the web with Konqueror... but after doing a big package update, and installing Firefox, I can no longer browse any website (Unknown host errors).The strange thing about this is that I can ping successfully via hostname
View 2 Replies View RelatedSo, I've installed Ubuntu v9.10 through the Wubi and I can see only the C, E drivers but not the D one (which is, where I have installed the Ubuntu itself and maybe that's why the problem appear).
View 4 Replies View RelatedI just booted up, after making a flash USB for a test (didn't work) so I booted as normally into Ubuntu 9.10 (not dual boot). When I get back on, there's this... I don't know how to explain it. If someone can think of a better way to explain this, I'll change the title to be a bit more helpful, and easier to search for those who have a similar problem.
I can't browse through windows (such as with Alt + Tab, or even just clicking on another window), nothing comes to the front, and stays as is. I've not touched my graphics / display settings, so the only thing I can think of, is when I was going through the boot-up applications, but I doubt I disabled anything that would have been graphics and GUI based, or the compizconfig-settings-manager disrupted something. I've ye to test anything, it's rather early.
My centos 5.6 firewall server shares its Internet connection with my windows machine behind it. After the required settings, the windows machine can ping valid ip addresses but it cannot browse valid url (despite the fact that DNS is set for it).
View 14 Replies View RelatedIn debian lenney I use the dnsmasq as dns resolver, and wvdial to connect to isp, the wvdial connect to the isp but cannot browse the internet with firefox, these are what is done:
Dec 28 21:19:53 salman pppd[8398]: pppd 2.4.4 started by root, uid 0
Dec 28 21:19:53 salman pppd[8398]: Using interface ppp0
Dec 28 21:19:53 salman pppd[8398]: Connect: ppp0 <--> /dev/ttySHSF0
Dec 28 21:19:54 salman pppd[8398]: PAP authentication succeeded
Dec 28 21:19:54 salman kernel: [ 2655.428889] PPP BSD Compression module registered
Dec 28 21:19:54 salman kernel: [ 2655.500676] PPP Deflate Compression module registered .....
Same pc with same isp, modem and dnsmasq working in fedora 12 as I am posting from from fedora 12.
I have a acer aspire. I recently dual booted with xp and fedora14. we have wifi in the campus and the problem is : I am able to connect to wifi & browse in xp but on the other hand with fedora I am able to connect and the signal is also pretty strong, but I am not able to browse.I am using a firefox mozilla, we also have a proxy for which I have configured all the setttings.The error being displayed is "connection time out".
View 1 Replies View Relatedif I click on Network in the side bar I get Could not display "network:///" Nautilus cannot handle "network" locations.so how do I browse the "samba" network? why doesn't this work out of the box?
View 13 Replies View RelatedI have followed this howto but I can not browse the directory all users. [URL]
View 14 Replies View RelatedI have installed apache using the appropriate 'yum' commands.I didn't experience any problems during the installation.My problem is that I am not able to see any php file I created myself (I have installed php too).The only php file I can see is the one I created using this:
Code:
su -c 'echo "<?php phpinfo(); ?>" > /var/www/html/index.php'
Then I am able to see the information from the above file.
[code]....
I just installed FC15 from scratch, and everything seems to be working OK, except that I cannot view other computers on my local network. I didn't have any problems when I was running FC13.I am able to get on the internet, and view the website I configured on this machine, but anything "network" related I cannot see.But now when I open Network, I am presented with MYGROUP, WORKGROUP, and my domain name (which is my actual "workgroup" as I don't have a domain). I cannot get to any of them - get the same timeout error as above.
View 10 Replies View RelatedI want to browse the git repositoryURL>..with gitg, but i couldn't seem to find any place for the url to be placed in gitg.could please anyone guide me how to use gitg to browse the repository.
View 1 Replies View RelatedHow to browse as root in GNOME 3?
View 5 Replies View Relatedlog in ubuntu (i use Ubuntu v9.04) , and i go to Places->Computer, but i can't access to my local disks?A notice of error is:Code:Could not display "computer":Nautilus cannot handle "computer" locationsWhat's this error? How to fix it or only reinstall Ubuntu?And i have another question: How to install GTK+ , i want to find GTK+ deb file, but i can't. I install GTK+ by compile source code, but when i compile, in my ubuntu don't find package ATK,cairo.... But i don't know exact what's ATK, cairo. I can't find it.
View 1 Replies View RelatedI installed Ubuntu 9.10 as Guest OS with Windows XP as Host using Virtual Box. I have also installed the VirtualBox Guest Additions. Now I want to connect to the internet using my modem.
[URL]
From the above link, I downloaded the scanModem file from the Host XP. I don't know how to copy that file to the Guest Ubuntu OS.
[URL]
I couldn't find the /mnt/msdos directory - only /mnt (no files inside that directory). Also, don't know how to paste from the USB drive.
I made a full disk backup using Clonezilla on a external drive and I used lzo, but this time I need to browse its contents somehow and extract some files but I could not find a utility that reads lzo archives.
View 2 Replies View RelatedIts a single PC, I can ping my connection but I cant able to browse any sites..These are my outputs.
Code:
karthick@Learners-desktop:~$ ping -c 3 google.com
PING google.com (209.85.231.104) 56(84) bytes of data.
64 bytes from maa03s01-in-f104.1e100.net (209.85.231.104): icmp_seq=1 ttl=45 time=355 ms
64 bytes from maa03s01-in-f104.1e100.net (209.85.231.104): icmp_seq=2 ttl=45 time=355 ms
--- google.com ping statistics ---
3 packets transmitted, 2 received, 33% packet loss, time 2000ms
rtt min/avg/max/mdev = 355.239/355.534/355.830/0.665 ms
recently I got new wireless card, att usb Quicksilver(based/produce by Option?), for att.Regular gnome network manager freezes the computer when I am plugging it it therefore I installed the one from wicd.net.Also, I am using HSOConnect (to connect by to G3 network), and sometimes I connect to regular wireless g connection through router.
Under both cases I can ping the website by IP and can access the website by ip (ex. google) but can not ping or browse by name.As a side note... I can use and access Skype fine under g3 network and normal wireless.I tried browsing and finding other solutions in past few days but ended up breaking everything and reinstalling to get back to the point I am at now.I am working on the road, so not being to broswse is rather crippling to me.... also I can access internet normally only from home from different computer now.
I know this is probably an extremely easy question... but does anyone know how to browse the files of an mp3 player in ubuntu 10.04? when i insert it it shows up in rhythmbox, but i'm unable to browse the files manually... i also looked under media and it isn't showing up. any ideas?
View 2 Replies View RelatedI haven't been playing with linux for some years.
My setup:
Private router which connects to the internet.
Host: win7 with VMWare workstation
Ubuntu 10.04 runs in a virtual machine on VMWare workstation.
Win7 works fine. Ubuntu can ping with valid ip address and firefox can load a webpage if provided with valid ip address. Ubuntu cannot ping with domain name and firefox cannot browse with domain name. Examples:
Ping google.dk results in
Code:
ping: unknown host google.dk
Writing google.dk in the address bar of firefox results in
Code:
Firefox can't find the server at www.google.dk.
Code:
peterbf@ubuntu:~$ ping 216.239.59.104
PING 216.239.59.104 (216.239.59.104) 56(84) bytes of data.
64 bytes from 216.239.59.104: icmp_seq=1 ttl=237 time=40.3 ms
64 bytes from 216.239.59.104: icmp_seq=2 ttl=237 time=38.8 ms
^C
--- 216.239.59.104 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 38.892/39.645/40.398/0.753 ms
Writing 216.239.59.104 in the address bar of firefox results in a correctly loaded google page.
brand new install of 10.4 server and I'm having a strange issue. I cannot browse to any website by it's domain name, but I can connect via IP address.
I've been googling around and did the following:
added nameservers to /etc/resolv.conf based on an nslookup from my windows box:
nameserver 71.250.0.12
nameserver 68.237.161.12
I commented out the hosts line in /etc/nsswitch.conf per another site and changed it to: hosts: files dns
I can see other computers on my local network via IP and I can browse to the server's default apache page by it's hostname, so I'm assuming it's something about the server's dns resolution, but I'm not sure of my next step.
I tried browsing URL... from Ubuntu - no luck - all browsers fail saying it's some network problem or so,but when I launched windowsXP from VirtualBox from inside Ubuntu (Maverick x64) - no problem viewing this site.Anyone any idea what could be wrong?
View 9 Replies View RelatedI have Ubuntu 10.10 at work and I've installed a Windows XP virtual box machine under it, that is joind to our Active Directory domain(but Ubuntu is/will not joined). I've set up VPN on XP box and I can connect to it from Ubuntu. I want to browse network shares(that use AD for permissions) and domain sites(like sharepoint) from Ubuntu. But even after connecting to VPN when I can't browse network shares, and nautilus asks for domain user/pass and tries to open share with no success. What extra steps is needed to browse my corporate network from Ubuntu via VPN?
View 4 Replies View RelatedI have been quite frustrated searching around for others that have had the same problems as I have had an what solutions are available. It appears there is a plethora of issues surrounding file sharing between Ubuntu and Windows machines; but things work prefectly for some and not for others.
The specific problem that I have having is that I cannot access file shares from any of the Windows 7 machines on my network. I use a Windows 7 machine for the main source of files that I like to access from other machines on the network. I do not normally access it from other Windows 7 machines through a Homegroup (I have removed the Windows 7 PC from the homegroup while trying to figure this out as well) - I normally just browse the network via the Windows 7 machine.
Here is what I'm doing (and seeing):
1. Click on home folder icon on Unity's launcher
2. Click "Network" in the sidepane
3. Wait a long time (like 40 seconds or so). "Windows Network" is the only folder/icon showing up in the "Network" folder once it shows anything.
4. Click on "Windows Network"
5. "WORKGROUP" shows up
6. Click on it
7. There is a delay with no visual indication (other than nothing happens and clicking in that window does nothing) and then I see "Opening "WORKGROUP" - Click cancel to stop"
8. See "Unable to mount location - Failed to retrieve share list from server"
I ran 'smbtree -N' and see a line for the PC I'm currently using, plus I see the following line for the other two PCs in the workgroup "WORKGROUP" (name is different for other PC):
Code:
\MEDIA-PC
cli_start_connection: failed to connect to MEDIA-PC<20> (0.0.0.0). Error NT_STATUS_UNSUCCESSFUL
I've seen guides to auto-mount certain shares from other projects to specific locations, and I'll probably do this at some point, but I really want to be able to browse the other machines shares.
Code:
session request to 192.168.1.3 failed (Called name not present)
session setup failed: NT_STATUS_LOGON_FAILURE
I am connected to my wireless router (wlan0) i'm also connected to my laptop via cable (eth0) wlan0 has the internet connection, if i disconnect eth0 i can browse internet but if it's connected, i cant eth0 has manual address: 192.168.0.7 wlan: auto (right now:182.168.0.255)
View 9 Replies View Relatedthis is really software and not hardware. So, my wife trashed her Windows laptop with a lovely virus for the third time this year. I told her that three strikes and she's going to somewhere she can do no harm: Linux. So, her personal laptop is an old HP-Compaq from 2004.
It took Ubuntu 9.0.4 like a champ, wireless and everything working. I expected nothing less. OK but here's the problem, on the wireless connection, not the wired connection, she can't browse with Firefox. Oh, I can ping external IPs, I can ping external host names and I can browse from the CLI with Lynx. I know this is going to be something really obvious but I am stumped.
When the dsl modem connected to net I cant browse pages through my fedora9 in my desktop. I never had the same prob before I used it a hour ago now it is not working. The connection established symbol comes and the ip addresses are assigned by dhcp and the connection is eth0 and I can use the same in windows xp so the router and internet connection have no prob. I cant ping through fedora and I can ping my own IP address, I can access my router only the browsing have problem my browser is firefox.
View 1 Replies View RelatedI've always been a big fan of linux having used it extensively in the military, came across a really nice looking distro called ubuntu 8.10. I installed it along side Vista on my hp dv7-1170 laptop and dual boot. Worked like a charm found all the drivers for all the hp devices including the webcam bluray etc. So I decided to put ubuntu on exclusively and just run virtualbox ose and put a vista session on there for when I needed it.
So I did that no problems, went and installed all the updates. Between the time I installed the updates and downloaded and installed a server patch to allow it to use all 4gb ram, I lost my inet connection. which was wireless. So I plugged into cat5 outlet and nothing. Just won't get an IP, so I wiped it again and reinstalled. Now I still can't get an IP from wireless or eth0. I can manually assign it an ip and it says connected, but still don't get out.
My web server public IP is: 202.1.2.3 and it was natted to internal IP 172.16.1.31 just confusing why I am unable to browse http://202.1.2.3 from LAN? (I able to browse http://172.16.1.31 from LAN)
View 11 Replies View RelatedI am trying to download data/file from web server where htpassword has been setup, I have tried with browser it its working fine, but when trying to same with 'wget' its not working, how to download the file. Below is the command I am using. [URL]... admin[:]password (may be smily get overide)
View 4 Replies View Related
