Using Kubuntu 10.04 here
I've been trying to make my microphone work and so I've pretty much messed around with the mixer (KMixer), mainly adding channels to the "equalizer" and checking and clearing "capture" boxes. After I did that my sound "disappeared" - I have no sound whatsoever (not even Kubuntu's initialization sound).
How can I fix this? Is it possible to go back to the "default" configuration?
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedIs there any program like virtual dj 7?
View 2 Replies View RelatedI have got my headset connecting to the system using the BlueMan interface. When I first did this it gave me a error about not being able to put the sound on-top of 'pulseaudio'. Well this well about the last straw between me and Mr. 'PulseAudio', so away he went. I removed the demon via this instruction. [ubuntu] Safely Remove Pulseaudio?
I then tried connecting to my bluetooth headset again, no errors. But the bluetooth sound device does not show up in any mixer, or application. What else do I need to do to get this working again. I know my hardware is fine, it used to work in the previous version of Ubuntu and it all works on my wifes Windoze XP computer.
How do I get mixer and dsp to appear in /dev? I can't use Lavrec without disabling audio.
View 1 Replies View RelatedIm using Ubuntu 10.10 Alpha1. I plugged in a set of headphones, and it cut out my speakers. I know how to fix this in Alsa Mixer, but the command for it obviously isnt the same as Karmic.
I type Alsa Mixer, it says Usage: /sbin/alsa {unload|reload|force-unload|force-reload|suspend|resume}
Anyone know a way to open A.M. that it will.
I used to watch and record TV in Vista and Win7 with a SAA7134 capture card, and all worked fine. Using TVTime in Ubuntu 10.10 64bit (no upgrade but fresh install, everything up-to-date), I get picture but no sound. Instead I get this error message when running TVTime from the terminal: Can't open device /dev/mixer, mixer volume and mute unavailable.Using lspci in terminal lists the card as following:
Code:
02:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
And dmesg outputs this:
Code:
[ 16.078404] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 16.078458] alloc irq_desc for 17 on node -1
[ 16.078460] alloc kstat_irqs on node -1[code]....
Being rather new to Linux (oh great, another newbie ) I don't know what additional info you might need, but I'm more than happy to post everything neededd - provided you tell me how to get that info.
My microphone wasn't working so I entered alsamixer to amp up it's volume and see what's wrong.Not sure what I did wrong but now the gnome volume control applet in the Indicator does not affect system volume at all.I can even mute it and it will not mute anything.The volume controls in alsamixer work fine and changing the volume in alsamixer affect system volume immediately.What could I have done? How can I get back volume control inside gnome?
View 2 Replies View RelatedSlackware 13.1_64, everything works like a charm,BUTevery time my slackware boots up,the sound system changes from one device to another.So if I boot now, sound address is hw:1.0.
then if I reboot, the sound address becomes hw:0.0It's really annoying, because every time I have to re-run xmms and mplayer setup to get any sound!Also, if any program is playing audio (like xmms), other programs cannot play audio at the same time.ie: if I'm listening music with xmms then I try opening some video with mplayer or firefox/flash, I get no audio on this video....What's the deal with kde phonon? I thought it was supposed to be the new global sound system for kde4, like arts was for kde3
I'm trying to configure PulseAudio using the official guide and can't get past the first step where it tells me to input pulseaudio -nC.
1. How can I get into the PA console/daemon to use the official guide
2.If I can't get PA setup correctly, is there an ALSA sound mixer I can use to modify sound levels for various running applications.
2B. Is there a sound mixer that works with OSS applications as well? Most apps these days are ALSA, but some older ones (like Wolfenstein Enemy Territory) use OSS.
Sound was working until I tried to install a rawhide version of Nouveau which hosed my system.Backed out to where I started and the sound is gone.The hardware is not showing up in the System> Preferences> Sound.I reinstalled alsa and pulse audio.
Code:
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
[code]....
I am experiencing problems with the Gnome ALSA Mixer. I installed Ubuntu on my MacBook Pro inside Windows (I am running Windows via bootcamp), and when I am running Ubuntu the sound doesn't work. After researching the problem online, I was told that one needed to download an application called the "Gnome ALSA Mixer", and switch the mute to off (apparently the mute is default). I downloaded the application, but whenever I try to run it the application window is blank. There are no controls of any sort. I was told when installing Ubuntu inside windows that the disk efficiency (I think thats what is was) is very much reduced, but I don't know if this has anything to do with that.
Also, is there a way to prevent the trackpad from registering stimulus while typing? I find it very obnoxious that every time I try to type in my password or the like that the curser clicks off of where I'm typing, so I am constantly having to move the pointer back and re-click in the area I'm trying to type in (if that makes sense).
I know I can use alsamixer in a terminal to adjust the sound for various input/outputs. But when I launch the alsamixergui, I only get Master Volume for Pulse Audio, which does me no good (Experienced the audio bug described in this ..... video [URL] how can I change the sound card in the Gui Mixer (S and F6 does nothing).
View 1 Replies View RelatedI have fedora 11 install Code: Linux root 2.6.29.4-167.fc11.i686.PAE #1 SMP Wed May 27 17:28:22 EDT 2009 i686 i686 i386 GNU/Linux But sound is not able to come for listening music ,which alsa driver should i install
View 3 Replies View RelatedI just bought an HP Pavilion dv7-1273cl and it works excellent except for the sound and the webcam, the result for lspci is as follows:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Gnome volume control shows that HDA Intel(Alsa mixer) is selected and as a default the speaker is muted, if I unmute it, an infinite loop-like sound plays and no application seems to have access to the sound, I believe the correct module is installed by default, and the webcam does not work as well. I'm using debian squeeze i386.
After compileing my kernel i get no sound. I tried : alsaconf - choose my sound card - everything is all right, but when i try alsamixer i get : No mixer elems found
[Code]....
When i watch ..... videos it tends to stay on my browser in a weird way, so when i go on other tabs it is still there and is rather irritating ..the image shows what i am talking about flash.jpg.I use ubuntu 10.10 and firefox 4 if that helps...
View 7 Replies View RelatedHow can I stop Mplayer from messing with my alsamixer settings?
View 2 Replies View Relatedhow to save my settings in Gnome-Alsa mixer. Everytime I restart I have to go in and set everything Is there a save I'm missing?
View 7 Replies View RelatedI have not been able to find but one post which stated they had successfully gotten ubuntu to work with Alesis Multimix 8 USB mixer. I have the very latest release of Ubuntu. I read where the gentlemen claims that [URL]... is the reason he was able to start using his alesis mixer. I'm just letting everyone know that I am going to try this. When I'm done I'll let you know if it works.
View 3 Replies View RelatedI've got a headset with a microphone plugged in, but not recognized by KDE's mixer.
Code:
Bus 001 Device 006: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort USB Headset The device is visible in system settings: System Settings->Multimedia->Phonon->Audio Capture
but not in the mixer under Capture Devices. Is there an easy way to get either the notebook's built-in mic or the headset mic to start?
when I upgraded to xubuntu 9.1 I was pleased to find a mixer control sitting in my notification area.well, yesterday I was doing a little "house cleaning" and removing apps I didn't use. I removed Brasero, Listen and Sound Recorder. I use xfBurn, Banshee and Audacity. now I notice today that I am missing the mixer control that I had like so much. still have xfce4-mixer, but all the controls have been reset. and I can't get it to minimize/close to the notification area
View 1 Replies View RelatedI have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
View 1 Replies View RelatedALSA mixer resets my speaker volume to zero and changes my USB headset volume to a very low level. How can I get ALSA Mixer to remember my volume settings from last boot or if there's no other option, a way I can make it adjust the levels to a predetermined level automatically on startup. I'm using 10.10 with pulseaudio.
View 3 Replies View RelatedI notice that each time I boot my computer, under the playback section of the ALSA Mixer the 'Speaker' volume control is turned all the way down. Even when I return it to the proper level, and then restart my computer later, the slider for 'Speaker' seems to default back to the previous state mentioned above. Is there a way to set the default for the ALSA mixer in a .conf file of some sort so that the default setting for 'Speaker' is always at max?
View 4 Replies View RelatedI'm using Mate on Jessie. The problem is that mate-volume-control kinda sucks as an audio control. It doesn't have nearly enough options for a proper volume control program. Pulse is much better for my needs. It or Alsa. Is it possible to remove mate-volume-control, or at least make Pulse the default volume control?
View 5 Replies View RelatedAfter trying to unsuccessfully install OSS4, it seems I've broken ALSA and have no sound. I've uninstalled the oss4 packages and rebooted, and now alsamixer reports "cannot open mixer: no such file or directory". Here's the output of aplay -l: List of PLAYBACK Hardware Devices aplay: device_list:244: snd_ctl_pcm_next_device PulseAudio also doesn't find any hardware devices, though it is able to play to the Apple Airport Express down the hall. I'm running 10.04 64-bit on a Thinkpad X61.
View 1 Replies View RelatedI am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
