I want to get file system for board Em2440 III (has s3c2440 processor), has this specification 1- has driver of GSM module ( Telit GE865). 2- its size less than 64MB.
View 4 RepliesI want to add GSM module to my board EM2440 How i can connect the module with Linux kernel 2.6.30 ? Are i will use gsmd or another ? and how add it with the kernel ? What about its GUI ?
View 1 Replies View RelatedHow i can connect GSM module with board EM2440-iii? I have linux kernel 2.6 on the board.I read that it work by AT command but i need more details .
View 2 Replies View RelatedI am trying to build a low cost computer, and over the last few days, I was interested in Linux as my OS to use. All I really need for the computer was the internet, word processors, and 3 games: "Wizard101", "Fusion Fall", and "Free Realms". Would Linux run on a built computer with an AMD processor and an on-board GPU? And would Linux run all of my needs/wants for this computer?
View 9 Replies View RelatedWhy can't I find a HCL?
Does Fedora 14 support ASUS P5KPL SE motherboard?
What is the best board to use with Fedora and a INTEL PENTIUM D E5500 processor?
Here's the situation: My Dell Latitude D830 video chip failed. Dell has replaced the system board under warranty. The following problems now exist:
1. eth0 has become eth1. The system failed to see the current ethernet as the only ethernet.
2. wlan0 has become wlan1. The same has occurred.
3. The pulse audio applet (I know, not officially supported) will not start up properly at boot complaining about something missing or wrong in the configuration. I suspect the hardware for sound is also not recognized as the previous.
4. Pidgin and Firefox are both having issues with anything SSL and digital certificates. In pidgin, I can no longer log into AIM. With Firefox, I had to accept a bunch of new SSL certificates. (Did that once for any https web site I have accessed for the first time since the system board change)
I would seriously like to understand how the hardware detection situation affects all of this. I was able to tweak some configuration files to get eth0 back to normal operation by manually changing the MAC address. But that isn't working for wlan0/wlan1 as I attempted to make corrections using the GUI and that didn't work out too well.
Where would I find the central point of identifying hardware devices and device names? And I suspect the encryption cert issues are related to the change in hardware as well which makes me wonder a few things. What happens when a non-laptop user changes a network card? Is Fedora married too closely to the hardware? What happens if we were to try to "ghost" a Fedora installation?
I have a arm board where qtopia installed. there is no ssh or scp installed . how can i connect my board to my linux desktop.
View 2 Replies View Relatedi want to select some text from vim using "yank" command and then access the same on shell prompt using ^v or shift ^Insert.How can that be done. My OS is ubuntu.
View 3 Replies View RelatedAnyone know of a mother board with an onboard wireless nic that works with linux?
View 2 Replies View RelatedMy friend has a HP Pavilion dv2699ea (dv2500 series - somehow *shrugs*) that has stopped working. It's a Core2Duo laptop with a Nvidia GPU. The unit is no longer under warranty. Problems first started a few days ago with the laptop showing corrupted graphics in Windows and BSOD'ing after a few minutes of use. I tried booting to an Ubuntu LiveCD which worked for a while before succuming and crashing as well. The freezing/graphics corruption/BSODing does seem somewhat heat related (CPU runs at ~95'c under load) however I believe that if it is heat related, then it's already damaged components inside.
Now the system has corrupted graphics on bootup[1], including booting Ubuntu[2], and neither operating systems will boot at all (Windows can sometimes get logged in before showing a black screen and becoming unresponsive. Ubuntu just looks like [3] after X starts). (See comment below for links.)
The fact the problem occurs both under Linux and Windows says to me this is not a driver issue. I have run Memtest which passed fine and none of this seems HDD related as I managed to get ~30GB of data off the system before it finally gave up the ghost.
She has been using it repeatedly without giving it adequate ventilation for years (i.e. on the bed, or on a pillow), so it's my opinion that the system board has probably warped over years of cooling/heating and that's causing this current problem. If that is the case, then I can buy a replacement system board and fit it myself, saving about £200 over the cost of an out-of-warranty HP repair. Of course, I don't want to make her spend £100 on a replacement part for it to be the wrong thing, hence asking for a second opinion here!
Hopefully I've covered all the bases here. I'm a former IT support guy myself, so I've tried all the dumb stuff (driver updates, examining memory dumps from BSODs [one 'unrecoverable hardware error', three relating to the graphics card], etc).
I'm looking for doing AOE (Ata over ethernet) inexpensively with single board computers, like Routerboard stuff, but is there anything with sata plugs. Hopefully I can get each board for hopefully around $50, but a little more would be ok. Non-x86 is fine, Debian is as good as Ubuntu.
View 3 Replies View Relatedi have installed ubuntu in my laptop.since i have AMD processor fedora doesnt support AMD processor..the recent version fedora 12 supprots AMD processor.i am doing my final project in ns2 hence it should support tht too!!! Which is the best choice to override ubuntu grub fedora 12 or redhat linux.
View 3 Replies View RelatedAfter installing the 32 bit desktop version 10.04 on vmware 6 and then rebooting ( a number of times) I get the message "the guest operating system has disabled the processor". This doesnt seem to happen when I install the 64bit version though. I have 9.1 running in 32bit versions in vmware and several other operating systems.I am not sure if any of those things would cause this issue but I have read in posts about people having issues with RAID and speed stepping. Hopefully that info can help spmepne point me in the right direction. Thank you.
View 2 Replies View RelatedThe computer went into low graphics mode all by itself and then later threw a error that said incompatible processor system halted!the computer was getting really slow and made alot of noise.later the computer did something stranger..it restarted but normally when my computer normally restarts it bypasses the password page setup in bios of the computer. This time I still had to enter a password before it could reboot.Another thing...when it the ethernet cable was connected to the computer (internet connection was on) it was slow when it was unplugged it was not.I have read that unless you're running a server or something it is highly unlikeley you'll be hacked.
View 8 Replies View RelatedBasically system monitor and the "top" command show 2 cpu cores when I only have 1 (a 3 Ghz P4 on my work computer).
I'm not sure if the two are related but I frequently get 100% CPU usage when running a few programs together (Kile, Firefox, Chrome and okular for example) at which point even the movement of the mouse cursor slows down.
I'll often run iceweasel for watching videos via flash (hulu, ....., et cetera) while working, in fedora I never noticed any performance problems, watching the video while using chrome for browsing, gedit for editing, et cetera, everything was responsive. Though, now on debian running iceweasel for the same purpose hogs memory and processor time, which slows down the responsiveness of the system as a whole, making it difficult to use other programs.I'm curious how I should go about troubleshooting this issue, and what diagnostics might help me find the solution.
View 4 Replies View RelatedIf I have SMP kernel would it work with single processor or only work with multiple processors system?
View 6 Replies View RelatedI bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
My Redhat Enterprise Linux 4 with 6x partitions (/, /boot,/home, /usr, /var, /tmp) of 6.0 GB IDE Hardisk was working quite fine. I decided to create LVM on /home and /var partitions but due to some errors occured and I delete the /home partitions. That's why partition table altered. I then delete 4,5,and 6th partitions (/home, /var, /tmp) partitions and now try to create one by one but following error is coming:-
[Code]....
The Super block could not be read or do not describe a clear ext2 file system. E2fsck b 8193 <device> I have tried following commands,but could not successful:- e2fsck -p /dev/hda7 (where hda7 was created but afterthat it was deleted) e2fsck -a /dev/hda7
Have just assembled a new computer and thought I would install the 64 bit version of openSUSE 11.2 in a "Windows free zone". After a hiccup or two I have managed to get a system of sorts running but on trying to copy files from my old computer(via a memory stick) it tells me that Vfat is an unknown file system.On my old computer I am running 32 bit openSUSE 11.2 as a dual boot system with Windows XP and have no problems moving files between the two different file systems.Is it possible to get a 64 bit file system to read 32 bit file system drives and if so how do I do it?
View 7 Replies View RelatedHow to convert FAT file system to NTFS file system via Ubuntu,are there any commands to do this task?
View 2 Replies View RelatedI'm a little bit confused with partitioning the filesystem in Linux. the difference between creating the file system with fdisk and mkfs (when formatting the disk). I can't clearly tell my problem, so please look at this picture:
View 2 Replies View Relatedi have generated .exe file from C file (ie filename.c ) after compiling in linux machine with -O option. I wish to know about how to run that .exe file when linux system starts up ?
View 3 Replies View RelatedIn System Monitor, on the File Systems tab, the "Total", "Available" and "Used" columns don't seem to add up, and the "Used" percentage doesn't seem correct either.
My config:
/dev/sda1 = 80 GB SSD drive, / partition.
/dev/sdb1 = 50 GB FAT32 partition of an external 500 GB USB hard disk.
/dev/sdb2 = remainder of the 500 GB USB hard disk encrypted using luks.
Screenshot: The /dev/sda1 figures don't really add up well, but they're close at least (how you get "50% Used" from any of those figures I don't know!).
However, for /dev/sdb2, they're miles off:
"Free" = 146.2 GiB
"Total" = 409.7 GiB
"Available" = 125.4 GiB
"Used" = 263.5 GiB
[Code]...
So 2 days ago everything was all fine on my machine. Has been for about a month, but all of a sudden as of yesterday I have no sound, I am seeing IRQ interupts on boot, During boot I am seeing file system is not clean, , and swap space is being used for the first time while doing normal task, etc. These are 2 new hard drives in RAID 1 with ReiserFS. I should have used a newer FS but thats a whole other argument.
Anyways here we go.
The system is Debian Lenny amd64
Physical RAM 4GB + 6GB swap
/var/log/messages
Code:
Feb 21 07:35:09 Sarah kernel: imklog 3.18.6, log source = /proc/kmsg started.
Feb 21 07:35:09 Sarah rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="3994" x-info="http://www.rsyslog.com"] restart
code....
reducing the size of LVM. I did it by using the commands, lvreduce,fsck,resize2fs.After reducing the lvm size, my system is not booting...it is saying file system corrupted error.
View 1 Replies View RelatedI am getting occasional errors during the boot process.One at the beginning and one or two when I switch to single user mode.I 'd like to run the system file checker to fix any possible errors.But when I run fsck in the terminal I get the message:Code:
mansour@ubuntu-notebook:~$ fsck
fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
[code]...
Can anyone answer me the color code of the linux file system?
Especially, for those which have different colors in the background also like some have green background colors and are written in green some have yellow background and are written in black,why is it so?
Also please explain me the color code of other also.
I work for a company that makes portable devices running Linux and I was recently asked to make the underlying file system read-only for "security" purposes. Since the distribution is based on LinuxFromScratch, I know that very little writing happens at run time. So, even if the device runs on a usb flash device, I doubt that putting the root file system RO will be that beneficial. I am actually more concerned about a process actually breaking because it cannot open a file in RW mode than a process going rogue and filling the root file system with log files, etc. I'd really like to ear what kind of advantages disadvantages there really is with read-only file-systems.
View 6 Replies View RelatedI plugged in my USb drive into my computer yesterday and tried to delete a folder. I was unable to do so and got the following message
Cannot move file to trash, do you want to delete immediately? The file "my file" cannot be moved to the trash. Show Details Unable to create trashing info file: Read-only file system
So when I click on delete I get another error message:
Error while deleting.
There was an error deleting Case Study Database. Show Details Error removing file: Read-only file system
At this point I can only click on Skip, Skip All, or Cancel.
I have not changed anything on the stick recently so I dont know what is causing the problem.