Im trying to configuring TERRATEC H7 in Ubuntu kernal version 2.6.38.2. I followed the steps given in [url] .But im getting compilation errors. Also i would like to know this linux has this device support.
View 1 Replieslong time ago that I tried to use my DVB-T Stick with Fedora. In past there was a work-out, drivers to compile and so on... That behaviour is GREATLY enhanced in F12, very nice!
The only thing that a had to do was downloading the firmware, the other stuff remains by kernel and so on automatically. I WAS impressed.
But it doesnt matters what kind of programm/tool I used, nowhere was my DVB-T stick recognized. And for result of that, Im not able to view TV... What the heck is now going on?
No errors, driver correctly loaded, but nothings works?
Here is the dmesg-message, U can see everthing looks okay:
Code:
Here is the message when I start kdetv, that program tries /dev/vbi0
Code:
Code:
I search at FFado.org for this soundcard and it says that it's fully supported, but I can't get it to work.
View 8 Replies View RelatedI'm having issues with a Terratec T3 DVB-T USB stick. It seems that ubuntu is recognizing it, but it isn't usable in Kaffeine or VLC anymore.The funny thing is that is WAS working, but after installing some codecs, upgrading to a new kernel and rebooting it stopped working, and it is no longer detected by both apps... Kaffeine says "no available device found", VLC gives a similar error.I've tried booting the machine with the old kernel, but the issue remains. I don't think installing codecs (x264 for example, tried removing it, no success) has anything to do with it, so I wonder what went wrong?
Oh and one more thing; in gnome device manager there is a question mark next to the stick. So there might be something missing on the system after all. linux-firmware-nonfree was installed and reinstalled 10 times or something, still no go, not even after a reboot.
who has been able to make sound recordings with a Terratec DMX 6fire 24/96 soundcard? My Audacity does not find any source to capture from.
View 8 Replies View RelatedI have tried some older Terratec dual tuner receiver which worked well in ubuntu. It would be nice to know,if this current model works in ubuntu, if you consider buying..
View 1 Replies View Relatedvsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies View RelatedI have a combined analogue TV/FM radio/DVB-T USB stick Terratec Cinergy XS. This stick used to be supported by the em28xx-new driver, but it has been discontinued since a few months ago. A patch for 2.6.31 has surfaced, but I cannot find one for 2.6.32, thus it doesn't work any more. A similar model with USB ID 0ccd:005e is supported directly by recent kernels, however I have a 0ccd:0072.
View 1 Replies View Relatedthat dosent find anything for opensuse 11.2 how to install or find the mantis driver for it?!
View 1 Replies View RelatedI'm using a terratec EWX 24 96 sound card with ubuntu studio, and I have sound with the digital output, I have no sound with the digital input.
I had sound with the same configuration in Windows XP, and all the hardware is ok.
I think I have no sound at all, with Ardour or Rosegarden, that's like if the digital input was not here in jack.
First my system data:
- OpenSuse 11.4 x64
- KDE SC 4.6.2
- Terratec T5 / Cinergy DT USB XS Diversity -> linuxtv.org wiki
I have a this new USB DVB-T Stick and the tv reception works perfect. I tried to set up the remote control as well, but i got stuck. I followed this instruction.
excerpt from lsusb:
Code:
Code:
When I try to record the keys with the command
Code:
Irrecord does not recognize anything. This input device is also mapped to /dev/input/ir but this device doesn't work neither.
I also checked the remote cotrol with a digital camera: it sends ir light on pressing a key.
I connected Terratec H7 DVB-T/DVB-C into ubuntu kernal version 2.6.38.2. How to make this device up and running. I tried installing v4l-dvb but it gave lot of compilation errors. Also i would like to know linux has this device support.
View 1 Replies View RelatedI can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g
[Code]....
I've a 'Terratec Cinergy S2 PCI HD' DVB-S2 Card, which don't work with openSUSE 11.3. ('Terratec Cinergy S2 PCI HD' same as Hardware as 'HDTV-Karte SkyStar HD 2', 'Twinhan 1041', 'AzureWave DVB-S2', 'AD-SP400', 'DigitalRise DVB-S2', ...).
1. The VDR-WIKI shows me, that the card should normally work with Mantis DVB Driver. But the openSUSE 11.3 Kernel includes it.
2. The 'yast2 tv' don't find a driver and also no mantis driver is shown (same as 'HDTV-Karte SkyStar HD 2', 'Twinhan 1041', 'AzureWave DVB-S2', 'AD-SP400',
'DigitalRise DVB-S2', ...).
3. I follow the description on the linuxtv.org page. So I add in the '/etc/init.d/boot.local' the following line:
Code:
4. lspci shows the following output:
Code:
Code:
5. dmesg delivers
Code:
For me it looks like good - but so I see it right, vdr doesn't work with them.
I have done my last update about a week ago,and since than my USB port doesn't work.hatever I plug in,it's not recognized. I've tried to plug digitalphoto-camera and my cell-phone,but nothing
View 9 Replies View RelatedI tried to install Ubuntu 10.10 with the live CD and it kept freezing at creating ext4 file system for /. I finally got it installed using the alternate cd method. Now, my internet connection is not working. I am connected to a router with DHCP. When I boot up with windows, everything works fine. Ubuntu says that I'm connected with a wired connection but I can't access anything on the internet.
View 9 Replies View Relatedmy yum is working if i am physically on the terminal, but while connection with SSH its not working giving me Auto, request.Can someone please clarify this to me.i am on Centos 5.3 X64.
View 2 Replies View RelatedAbout an hour ago i did an update on my Debian Squeeze. After the update was completed my LAN connection stopped working.. now i have to connect my computer to my router with a usb cable instead with my ethernet cable.. also, on the network connection, on the wired network section it says that the device(ethernet) has not been managed..
View 1 Replies View RelatedI just set up my computer to dual boot Windows XP Home and Fedora 10. After installation, on Windows, the internet works just fine (since I'm able to compose this message). However, the internet connection on Fedora does not work.
Here are the details:
I'm connected via a cable modem only.
I have an Ethernet cable connecting my modem and PC.
I've tried looking info up online about the issue and many people say to do an ifconfig -a to get the MAC Address and so forth. How to get the connection working to use the internet with Fedora?
I was trying to activate my wireless connection .... in turn did something that triggered eth0 no-carrier when "ifstatus eth0"
View 2 Replies View RelatedI have installed Suse 11.4 recently and I'm trying to run the wireless connection and doesn't works.
Details:
card: pro/wireless 2200BG Calexico2
driver installed (as console said) kernel driver:ipw2200
hwinfo:
Code:
linux-4pom:/home/victorplata # hwinfo --netcard
25: PCI 604.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: JNkJ.BmKY+aW7YM0
Parent ID: 6NW+.pbi2aV6ikBD
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:06:04.0
SysFS BusID: 0000:06:04.0
Hardware Class: network
Model: "Intel PRO/Wireless 2200BG [Calexico2] Network Connection"
Vendor: pci 0x8086 "Intel Corporation"
I have tried to connect by traditional method with YAST, just recognized one network call "Hotel Riga 228", but doesn't connect. Also I have tried to connect with Network Manager but this application doesn't recognize ANY w. network.
I just recently installed Ubuntu 9.10 on a dell laptop. My WiFi connection that I've been using on the same computer for years is not working when I log on. However if I run the burnt image cd and choose the option "Use Ubuntu without making any changes to your computer" I am asked if I want install proprietary drivers. If I activate one "Broadcom STA" I can connect to the wireless connection in my house. When I am using the version installed on my laptop it doesn't ask me if I want to install the drivers and it doesn't even find them when I go to hardware drivers under system. So to sum it up I can get connection when I run Ubuntu from the cd but not when I run the Ubuntu on my laptop.
View 3 Replies View RelatedMy lan connection to my router isn't working i have it plugged in the cable is good ( fyi i do have some computer knowledge) So my wireless is working right when i booted up but my lan is not. i have a @#$^ i am afraid to say what it is lol dell with their integrated ethernet card. OS: ubuntu 10.04 everything works fine but the wired connection.
Dlink router with all of the settings made properly. i read somewhere about doing a whole bunch of stuff but i thought that since this was a higher version they would have that problem fixed. i also have aim or msn whichever is more preferred. i hopefully will be notified that someone has responded to this thread.
I'm recent to Ubuntu and have just installed version 10.04 32bits desktop version along side my Windows XP.My wireless internet connection works perfectly under Windows XP as this thread can prove it, but it does not work on Ubuntu.When checking the connections on Ubuntu I see:Wireless Network - disconnected.
View 9 Replies View RelatedRecently installed Ubuntu 10.04 on HP Pavillion ze5400.Wireless card is bcm94306MP. Wireless connection shows as disconnected. I am troubleshooting using the Ubuntu documentation on solving wifi problems. Ran ishw and it appears I do not have a driver properly installed. Obtained what I believe is the driver: bcmwl5.inf and bcmwl5.sys. Installed bcmwl5.inf using ndisgtk. I know its there as I can see it in System>admin>windows wireless drivers. However lshw still does not show it under configuration. I understand I must put the sys file in the same folder as where this inf file got installed. I assume all I do is copy and paste it into that folder. Is this correct? Next I need to find that folder. I tried the command find /home -name bcmwl5.inf and it did not show up. Can someone educate me just how to do this, that is find the folder and insert the sys file?
After I pass this hurdle then I will tackle trying to configure the card.
I have a wired problem in Ubuntu 10.10, My Ubuntu can connect with Wireless network, however it cannot connect to Wired Connection. I installed dual System, one is Ubuntu 10.10, the other one is Win7. Under Win7, I can both connect to the Internet in Wired or Wireless mode.
The more wired phenomenon is: When I plug in the cable, I can see the icon connected in my network manager. But I cannot visit any URLs. By checking the "ifconfig -a", I can see the IP addr was assigned to my eth0.
installed Ubuntu 10.04 on my Dell 1564. My cabled netwo connection is not working.buntu has been dual booted with Windows 7. Internet connection on Windows is working. I have an ADSL modem connected to my laptop via the cable.I have given the details of commands asked to be execute(viewed various posts).
isr@ISR:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
[code]...
Running a wired connection through a Linksys router that suddenly stopped working today.I thought this was a ipv6 issue sinced I enabled some of those settings to share a connection with my PS3.I have since disabled IPv6 in Firefox and through the grub. The RealTek adapter will not even show a connection through the network manager when connected.The onboard adapter will show a connection, give me a ip address and MAC but still will not load the internet. I've tried uninstalling and reinstalling both adapters through the network connections, as well as reinstalling Firefox to no avail.I've also tried using Open DNS servers.I cannot ping through the network tools either. Hard for me to paste a ifconfig since I'm on my laptop.I'm running Ubuntu 10.10 (not dual booting).I did some updates this morning but it worked fine for a little while after that, until I tried to connect to my PS3.
View 3 Replies View RelatedI am using ubuntu 10.10 and facing problem with cisco VPN connection. VPN connection is getting successful but not able to connect to destination servers.I also tried to add default gw to the the IP which is assigned to my VPN connection but still access to VPN machines not working.
View 1 Replies View RelatedI have an OpenVPN setup at work, and windows clients are able to connect fine. On my dual-boot system (Windows XP 64-bit and Ubuntu 10.10 64-bit) I'm able to connect on Windows but not Ubuntu. I use the same files for each. The network manager wasn't working, so I'm doing it via the command line right now:
Below is the output (sanitized)
Code:
Does this mean it's connected? If so, I'm not able to ping anything on the remote network, not even the OpenVPN server.