OpenSUSE Wireless :: WiFi Connection On 11.4 Not Working

Apr 2, 2011

I have installed Suse 11.4 recently and I'm trying to run the wireless connection and doesn't works.
Details:
card: pro/wireless 2200BG Calexico2
driver installed (as console said) kernel driver:ipw2200
hwinfo:

Code:
linux-4pom:/home/victorplata # hwinfo --netcard
25: PCI 604.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: JNkJ.BmKY+aW7YM0
Parent ID: 6NW+.pbi2aV6ikBD
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:06:04.0
SysFS BusID: 0000:06:04.0
Hardware Class: network
Model: "Intel PRO/Wireless 2200BG [Calexico2] Network Connection"
Vendor: pci 0x8086 "Intel Corporation"

I have tried to connect by traditional method with YAST, just recognized one network call "Hotel Riga 228", but doesn't connect. Also I have tried to connect with Network Manager but this application doesn't recognize ANY w. network.

View 6 Replies


ADVERTISEMENT

OpenSUSE Wireless :: After Reïnstalling 11.4 - No WiFi Connection Again?

Aug 13, 2011

I have a dual boot system : Windows XP SP3 and openSUSE 11.4 64 bits, GRUB for boot loader.Having had problems with my NVidia driver (computer hanging all the time), I reïnstalled openSUSE 11.4 from DVD.Since then : no more wireless internet-access, which functioned very well before.

Code:
/usr/sbin/iwlist scan
lo Interface doesn't support scanning.

[code]....

View 1 Replies View Related

OpenSUSE Wireless :: Loosing WIFI Connection After Wake-up?

Dec 24, 2010

The WIFI adapter is working, WIN driver is in use (with ndiswrapper). Linux driver doesn't exist. No issues until computer does to Sleep mode. Then just reboot it. Some times iwconfig commands helps.

View 4 Replies View Related

OpenSUSE Wireless :: WiFi Connection Dropping At Irregular Intervals

Jan 5, 2010

In summary, I am using openSUSE 11.2 x64 on an Acer laptop with a wireless AR928X card. I can connect to my WEP-secured network when I boot up. After some time (it might be minutes, it might be hours), I am prompted for my WEP password again. This never works, despite being the one which gets me on-line at start-up!. The only solution is a reboot. The problem is intermittent and doesn't seem to depend on my on-line activity. I have tried the following with the same result:
KNetworkManager
Traditional using IFUP
Enabling / disabling IPv6 support

I tried installing the compat-wireless package through YaST and then managed to get no internet connection at all. Went back to KNetworkManager and things "worked" again until I was prompted for the WEP code. I have openSUSE 11.2 x64 working on my office laptop without problem and can connect to my home network without any problem. My issues are with my personal laptop. I have reached the stage of booting into Windows 7 as my default option so that I can access the internet reliably. What I can do to diagnose and repair the problem - could it be that the card is going into powersave mode? If so, how do I stop that happening? I'd prefer to be on openSUSE but need to be able to rely on the internet.

View 9 Replies View Related

OpenSUSE Wireless :: Increasing Multicast Rate For WiFi Connection?

Jun 19, 2010

I have two laptops. First one is connected to my ISP via Ethernet connection. At the same time it serves as a wireless router for the second laptop (ad-hoc connection). Multicast routing is managed by igmpproxy. Everything works fine, except that multicast traffic rate on the second computer is very low (1 MBit/s), its too slow for watching television.

After some searching I found that this multicast rate is always minimal one for certain type of WiFi connection (802.11bg in my case) https://lists.ath9k.org/pipermail/at...il/003393.html. For some WiFi kernel modules its possible to set multicast rate by setting appropriate module options. But its not the case with ath9k.

WLAN configuration on the "router" laptop:

Code:
iwconfig wlan0 mode ad-hoc
iwconfig wlan0 key 1111111111
iwconfig wlan0 channel auto
iwconfig wlan0 rate 11M
iwconfig wlan0 essid WHATEVER

how to increase multicast rate on the second computer?

View 2 Replies View Related

OpenSUSE Wireless :: Wifi Connection Fails After The Recent Update?

Jul 8, 2010

Recently I updated my openSUSE 11.2 and I'm not too sure what all were the recent updates but I suspect networkmanager also got updated. After I restarted my machine, my laptop fails to connect to the wireless access point. I tried both in gnome as well as KDE but the same error. This is the log I found in my /var/log/NetworkManager which I believe should give some pointers.

Code:
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> Activation (wlan0) starting connection 'Buckeye Plaza'
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...

[Code]....

I did a search of this error in google and all I got were few results which complained about bugs in some debian distro.

My wireless card works fine and so does the access point I try to connect to since my Ubuntu installation is able to connect fine as well as my windows Xp.

View 5 Replies View Related

OpenSUSE Wireless :: Very Slow Start Of Knetworkmanager And Wifi Connection?

Dec 2, 2010

No improvement since I first reported this problem, I am hoping somebody can now advise.
Using openSUSE11.3 Linux 2.6.34.7-0.5-default i686 with kde 4.4.4 release 3.Problem is the wait of sometimes over 2 minutes before the wifi connection is available.Two questions:-
1. Why does it take so long? Longer by far than it to be with previous openSUSE releases. Much longer than with that other OS!!!2. How do I remove the wallet process. Not needed in present environment so I would like direct connection without having to open wallet. I didn't set this up, it just happened after I had upgraded to 11.3 and I need to know how to disable it to save time.

View 8 Replies View Related

OpenSUSE Wireless :: Strange WiFi Behavior Breaks Connection Repeatedly

May 30, 2011

I have recently upgraded to 11.4 and also had to renew an AP (HP ProCurve 10ag). This was several years old but replaced an identical model which had been working well until recently. I thought it would be appropriate to flash newer firmware as the device four releases behind the times. The access point serves partner's XP laptop and my openSUSE 11.4 laptop and after flashing the firmware both machines would make a connection and then break and remake, to the extent that the openSUSE machine became unusable. I thought it was an encryption problem and spent hours changing the AP and Client setups to no avail

After reading a thread here I checked out dmesg and this is what I found:-
[78.639247] wlan0: authenticate with 00:1d:b3:4b:ae:14 (try 1)
[78.640804] wlan0: authenticated
[78.642507] wlan0: associate with 00:1d:b3:4b:ae:14 (try 1)
[78.651195] wlan0: RX AssocResp from 00:1d:b3:4b:ae:14 (capab=0x411 status=0 aid=1)
[78.651200] wlan0: associated
[78.652222] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[78.652283] cfg80211: Calling CRDA for country: DE
[78.674378] cfg80211: Regulatory domain changed to country: DE .....
This went on and on.

View 7 Replies View Related

OpenSUSE Wireless :: MSI A6000 Wifi Not Working

Jan 9, 2010

getting my wifi to work with opensuse 11.1 and i've tried everthing to get the driver installed.

So far i have downloaded the driver from rallinks website for the RT3090, I have tried to install the .tgz but its doesn't appear to do anything when i run thru the

# ./configure
# ./make
# ./make install

anyone managed to get the WiFi working using the RT3090??

View 2 Replies View Related

OpenSUSE Wireless :: Wifi Is Not Working In DELL INSPIRON N4010?

Apr 22, 2011

I installed openSUSE 11.4 in my laptop as dual boot.But wireless drivers are not working.Please give a suggestion to work wifi.

View 3 Replies View Related

OpenSUSE Network :: Working Wireless Connection But No Internet / What To Do?

Jan 15, 2010

I've installed opensuse 11.2 on an old IBM thinkpad. The install went without a hitch and when I got to the desktop I inserted my Dlink DWL-G132 wireless USB adapter. Opensuse immediately recognised that a wireless device was attached and I could see my wireless network listed. I entered my WPA password and was able to connect to my routers configuration page by entering 192.168.0.1 in the URL bar of firefox. For some reason I am unable to navigate to any webpage. When I enter a URL firefox acts as though there is no internet connection. The only way I can get the internet on my laptop is to connect it to my router with a cable. I used a wired connection and ran the update utility thinking that perhaps an update would fix the issue but it did not. I know the adapter works because the laptop used to have windows xp installed and I could connect fine with that.

Does anyone here have any idea why I would be able to connect wirelessly to the routers configuration page but not to the internet? I appreciate any advice anyone may have.

View 9 Replies View Related

OpenSUSE Wireless :: Internet AR5001 Not Working - Connection Drops

Mar 5, 2010

i installed Opensuse 11.2 recently but the wireless internet wasn't working been searching for few days now and i can't find the solution. it shows my modem, and i can connect to it but for some reason it appears to drop the connection it keeps asking me for my encreption key so btw is one of the first times i worked with linux / opensuse.

View 4 Replies View Related

Ubuntu Networking :: 9.10 - WiFi Connection Not Working

Feb 3, 2010

I just recently installed Ubuntu 9.10 on a dell laptop. My WiFi connection that I've been using on the same computer for years is not working when I log on. However if I run the burnt image cd and choose the option "Use Ubuntu without making any changes to your computer" I am asked if I want install proprietary drivers. If I activate one "Broadcom STA" I can connect to the wireless connection in my house. When I am using the version installed on my laptop it doesn't ask me if I want to install the drivers and it doesn't even find them when I go to hardware drivers under system. So to sum it up I can get connection when I run Ubuntu from the cd but not when I run the Ubuntu on my laptop.

View 3 Replies View Related

Ubuntu Networking :: Wifi - Set Up The Wireless Connection Using WPA But Could Not Connect

Mar 19, 2010

Using an old (5 year) laptop with XP loaded I installed wubi to save altering partitions etc. It all downloaded fine and connected to the internet by wire. I set up the wireless connection using WPA but could not connect. The wirelsss card does see my network and others. After lurking around the forum and trying various things I found that I could connect without encryption. The more I read the more I became confused.
Anyway what I could glean about my Wireless Card it is a Intersil Prism2 mini usb adapter - but also shows up as an Acer ?? Warplink 802.11.

Using lshw I found this reference to wireless

I became even more confused and got a bit lost using the various codes in the terminal and looking up things about drivers etc but would like to persist.

View 1 Replies View Related

Debian Configuration :: WiFi Connection Isn't Working After Install?

Mar 27, 2016

I just installed the lastest stable Debian (gnome) today and what I was most afraid just happened: my laptop's wifi isn't working properly, it isn't turning on. This had already hapened on livecd.

In the laptop's chassis leds, the wifi led apears as green. When I click to turn on the wifi, as shown on the picture the button, quickly disappears and appears again not seeming to have any effect at all at turning on the wifi but not showing any error either!

Picture :

What's interesting about the wifi not working is that in the installation process I was able to connect to a wifi hotspot and it connected to the internet fine!

Now after installation was complete and my system did the reboot, I was no longer able to connect to the internet using wifi.

My wireless card is Atheros AR9565 and my LAN card is also Atheros.

Here is an output of lspci and lsmod which may have some leads about the problem.

lspci

Code: Select allquant@debian:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)

[Code] ....

Noticed:

1. I installed WiFi radar and I ran this on the terminal:

# sudo ifconfig wlan0 up

View 10 Replies View Related

Debian Installation :: WiFi Connection Visible But No Working Internet

Oct 22, 2014

I manage to install debian on my flex 10 (lenovo), but now internet is not working, i can see the network, but even being able to connect to them i can't access the net...

View 14 Replies View Related

Ubuntu Networking :: Wireless Is Not Working (only Wired Connection Is Working)

Jul 18, 2011

I can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:

#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g

[Code]....

View 9 Replies View Related

Networking :: Can't Get Intel Corporation Wireless WiFi Link 5100 Working

Sep 20, 2010

my platform Centos 5.3

i did the following

Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100

[Code]....

View 3 Replies View Related

Networking :: Can't Get Wireless Working In Slitaz (Asus Aspire ZG5, Atheros Wifi)?

Sep 17, 2010

So I decided to wipe out Windows and try Slitaz. It's an awesome well featured distro for it's size. One huge problem tho: I can't get wireless to work for the life of me. I actually went as far as to manually load the ath5k module but It just refuses to recognize my wireless router, much less any nearby routers. It simply doesn't see anything when it scans for wireless networks. I have no problem with that in Puppy Lucid. But I'd really like to use Slitaz, just for it's small size and quick bootup. Can anyone PLEASE help me with that?

PS: It happened here before that I had to plea and beg for any response, so PLEASE(!!) don't let me hang like that this time.

View 4 Replies View Related

Ubuntu Networking :: Wireless Stopped Working On 9.10 (Intel WiFi Link 5100)

Mar 10, 2010

I've got a Dell precision with Kubuntu 9.10. Wifi worked fine on that machine for months, but stopped working last week. I don't know what happened, but I recently did an "apt-get dist-upgrade". That might have something to do with it.

When I boot in Windows, wifi works fine.

Code:
tijl@Smaug:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: 82567LM Gigabit Network Connection

[Code]....

View 9 Replies View Related

OpenSUSE Network :: Share Internet Connection Through WiFi Interface

Jan 6, 2010

I have 2 laptop with opensuse 11.2. One of them is connected to the Internet through a Mobile Connection with a CDMA/EDVO modem on the usb port. I want to share the Internet connection with the other laptop through the WiFi interface of each of them. How should I proceed?

View 3 Replies View Related

OpenSUSE Network :: Home WiFi Connection - Waiting For Authorization

Nov 21, 2010

I have a problem: when I log in with my account NetworkManager doesn't connect to my home WiFi connection, cause it wait for authorization. No change if I try to retype the connection password, it still wait for authorization!

View 9 Replies View Related

Ubuntu Networking :: Wireless Stops Working With Multiple Intel 5100 (vaio) On Wifi

Nov 24, 2010

I'm using a Vaio TT, which seems to use an Intel 5100 WiFi chipset, and a Linksys WRT54G2 (firmwares 1.0.1 and 1.0.4), ubuntus 10.10 and 10.04.

Wifi works fine out of the box. However if the other vaio tt in our office (running windows 7) comes online, my laptop stops being able to make new connections. It WILL stay connected to chat servers, and downloads SOMETIMES continue to work. However all new HTTP requests / ssh connections / rdp connections / pings fail. The laptop still appears to be "connected" to the wifi network.

This may also happen after an undetermined amount of time without the extra vaio. It is not solved by reconnecting or rebooting. Once the extra vaio leaves the building, everything works fine again. This problem does not happen at all if I boot into windows.

View 4 Replies View Related

Ubuntu Networking :: Intel WiMAX/WiFi Link 6050 Wireless Card Not Working?

Dec 14, 2010

I'm dual booting windows 7 64 bit and Ubuntu 10.1 64 bit on my Dell Inspiron 11z with an embedded WiMAX/WiFi Link 6050 series wireless card made from Intel. I only use it for wifi, not 3g or wimax. I installed the latest driver from intellinuxwireless.org, iwlwifi-6050-ucode-41.28.5.1, but it still doesn't seem to work. I ran these terminal commands from another thread:

cd Desktop/wlwifi-6050-ucode-9.201.4.1
sudo cp iwlwifi-6050-4.ucode /lib/firmware
sudo chmod 644 /lib/firmware/iwlwifi*

[code]....

After running "sudo rmmod -f iwlagn sudo modprobe iwlagn", I get this read out for my wireless card.

*-network DISABLED
description: Wireless interface
product: WiMAX/WiFi Link 6050 Series
vendor: Intel Corporation

[code]....

In the ubuntu help section it tells me to flip a manual wifi switch to enable it, but pressing my windows wifi button, F2, doesn't appear to do anything while in ubuntu. The only experience I have working with linux is typing some terminal commands on my android phone to root it.

View 9 Replies View Related

OpenSUSE Wireless :: Knetwork Manager Wireless Connection Gets Disconnected And Ask For Password And Again It Connects

Aug 5, 2010

I am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.

View 8 Replies View Related

OpenSUSE Wireless :: Wireless Card Dormant Until Wired Connection Detected?

Feb 2, 2011

I have searched and have not found anything specific to my issue. I am currently using NDISWrapper to load the bcmwl15 driver and when it's active it works beautifully.Problem is sometimes at boot, the card doesn't "turn on" and I don't know how else to describe it. The OS does not even detect that the hardware is present. I have disabled wireless hotkey in BIOS. The only way to make the wireless card "active" is to reboot with the wiredconnection to the router. After doing that the wireless card "wakes up" and works awesome.Is there anything I can do to make sure the driver load at boot?mes I get the error that NDISWrapper is not modprobbed when I go to network configuration and if I wish to do i now? I don't know if that has anything to do with the boot sequence. Using the <modprobe ndiswrapper> command as root does nothing permanant

View 9 Replies View Related

OpenSUSE Wireless :: GNOME 3 Broke AR9285 Wireless Network Adapter - Could Not Make A Connection

Apr 23, 2011

I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?

View 2 Replies View Related

OpenSUSE Wireless :: D-Link USB Wireless .11n Dongle Configured, But No Connection?

Apr 27, 2010

I recently bought a D-Link DIR-655 router capable of 802.11n operation, upgrading from a DIR-624 router only capable of 802.11g operation. While my overall setup uses wired connections, other people in the house prefer wireless, and the upgrade was undertaken more for a hoped for increase in wireless range, rather than the possibility of increased speed, since the router is located to accommodate the wired connections. However, to test the 802.11n operation I bought a D-Link DWA-130 USB dongle for my now 5-year old laptop, which comes with an otherwise satisfactory 100Mbs ethernet port(eth1) and an 802.11g wireless card(eth0). By checking the dmesg | grep firmware output after I plugged in the dongle I determined that the necessary firmware was rtl8192sfw.bin, which I found on the web, and downloaded into the directory /lib/RTL8192SU.

A subsequent reboot and then YaST > Network Devices > Network Settings showed the device as wlan0, but not configured. I changed the Network Setup Method to ifup (since I can see no way to do a device configuration in Network Manager), and configured the device, and at the same time deleted the configuration for the existing 802.11g wireless card(eth0). I then rebooted, went back into YaST to confirm the wlan0 device was configured and the 802.11g device (eth0) was not, changed the Network Setup Method back to Network Manager, rebooted again. Making sure that the router was set to only transmit/receive using 802.11n I then typed iwlist scan. To my surprise, the output showed first that the supposedly unconfigured eth0 device seemed to be still active, for it found my home network, and claimed that the protocol used was 802.11g. On the other hand, the newly configured wlan0 device produced the message: "Interface doesn't support scanning: Network is down".

First, should I expect iwlist scan to work for a device that shows as unconfigured? And even if it should work, shouldn't it show 802.11n as the protocol, assuming that the router is in fact telling the truth? Is there any independent means to determine if the router is only using 802.11n as it claims? Second, the overall goal is to make the wireless network in the house 802,11n only, and since the dongle is backward compatible with 802.11g, I would expect to permanently unconfigure the eth0 device and use the dongle, both here and on the road. I do not need two wireless connections on my laptopThe laptop is running SuSE 11.2 as of about a month ago. Some relevant(I hope) command line output:siracusa:~ # uname -aLinux siracusa 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 i686 i686 i386 GNU/LinuxUSB Information

siracusa:~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 2001:3301 D-Link Corp. [hex]

[code]....

View 9 Replies View Related

OpenSUSE Wireless :: Continued To Lose Wireless Connection After An Hour Of Use?

Sep 13, 2010

I just started using OpenSUSE on an old laptop. It seems that I have my graphical problems at least temporarily solved, but I continued to lose my wireless connection after an hour of use. This is an old and well supported chipset (RT2500) and I had never had any issues with it before. I use WPA security, and one kind poster suggested I had a line for using the old "wext" driver in the /etc/sysconfig/ifcfg-wlan0 file, and that seems to have sorted it since I have not had any further issues since doing that edit. I eventually found the information on my own:

# Note: This option requires a wpa driver supporting it, like
# the 'nl80211' driver used by default since openSUSE 11.3.
# When you notice problems with your hardware, please file a

[code]....

View 9 Replies View Related

Slackware :: Wireless Internet Not Working - Intel Corporation WiMAX/WiFi Link 6050 Series

Mar 26, 2011

I've reinstalled Slackware 4 times today because of things I've messed up along my way, after upgrading the linux kernel I've had issues with getting back to desktop, so I'm on a clean slate right now with the exception of installing wicd. I need help since wireless is not working.. My wireless worked fine out of the box with Ubuntu,I don't understand why it is not working now... Using Slackware 13.1, Kernel 2.6.33.4

Code:

bash-4.1# ifconfig wlan0 up
SIOCSIFFLAGS: No such file or directory

[code]....

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved