I'm looking for a battery monitor for my panel. I've tried cbatticon and batti which seem very similar. One (I think cbatticon) shows notifications (which I want) but I also want to customise when it shows the notification (specific percentage). I'm looking for something lightweight and that will work with any panel with a notification area (I change from time to time). I've also tried vattery but that looks ugly and doesn't have notifications.
I managed to install Jessie on my new Lenovo Ideapad 100 and have been trying to put the finishing touches on it. I downloaded FDPowermonitor and the icon showed up right away. Then after a few minutes it went away and hasn't shown back up.
I think I need to modify /etc/xdg/lxsession/LXDE/autostart to include @fdpowermon but I cannot figure out how to have the permission and use a editor I understand.
I just log into LXDE with root... but there has got to be a better way yes? But that didn't work anyway...
I just updated my Ubuntu to Maverick Meerkat and it seems that now the battery monitor doesn't work. It shoes the icon on top and the battery icon gets full while the battery charged but it doesn't say the percent, it just says Laptop battery (estimating...)
i have been looking for a simple network monitor daemon for ubuntu, for some time but have not found anything that suits my requirements and from what i've been reading online there seems to be quite alot of other people out there that are looking for the same thing. [URL]...for-linux.html page seems to have the most comprehensive list of similar products but if you read through all of them they don't seem to be what i'd imagine most home users need. here's a list of what i had in mind, if any one uses something that has these features or knows of something that might meet these requirements please let us know! 1)a small lightweight daemon that can be accessed via the panel on gnome 2)has thee ability to monitor eth or ppp (particularly internet traffic)3)can represent this data in a human readable format ie using megabytes and gigabytes 4)can store a history of how much data is being sent and received over long periods of time (like several months)
I am running Slackware64 -current. I just upgraded KDE to 4.6.0 from Alien Bob's ktown repo, and upon doing so my battery monitor no longer functions properly. More specifically, the icon will appear in the panel, but when I choose the option to show the charge/discharge state it does not show. The icon only ever shows that the battery is not plugged in to an external power source (showing a plug and a red x). It is important that I get the battery monitor functional once again as I am running my new Slackware64 -current install on a laptop and don't like to be left wondering when my laptop's battery will die and if I need to plug it in.
getting back to our laptop, the stability window is ~3.2V. Meaning that when you operate the battery above this the electrolyte is oxidized on the positive electrode and reduced on the negative electrode. Remember that we only want to oxidize and reduce the active materials and don't want to do anything else. All these reactions other than the ones we want are called side reactions and these are really bad for the battery. The nominal voltage of a laptop battery is 3.7 V which means that something bad wants to happen as we use the battery.So long story short, stuff (e.g., passive layers and poor kinetics of reactions) happens and things are not as bad as they seem and you can increase the voltage up to 4.2V without bad things really happening. All chargers for Li-ion cells today cut the battery off when it reaches 4.2V. What you have to realize is that at 4.2V, these side reactions are present in finite amounts and start to chemically kill the battery, but its not that dramatic.
Operating to 4.1V makes things better and extends the life, 4.0 V is even better and so on. So why don't battery manufacturers cut the voltage off at, say, 4 V to get better battery life? Because every time you cut this voltage down you decrease the capacity of the battery and its run time. The 4.2V cutoff is a compromise between good run time and decent (read "not pathetic) life.On the other hand, if you charge the battery and then pull the plug (so to speak), the battery discharges some, the voltage drops, and these reactions become less of a problem and your battery life goes up. So the best things you can do is to charge the laptop (or cell phone, camera etc.) and once its charged, pull the plug. Your battery will thank you for it.As a matter of fact, if you own a Lenovo Thinkpad, you can actually change the state of charge to which you charge the battery using the Battery Maintenance utility. You can change this from charging to 100% state (where the voltage is 4.2V) to 90% so that your voltage is less. You lose some energy is doing that, but atleast you can change it to 100% when you need battery power and put it back down to 90% when you can plug in. I wish my Mac has the same feature.
I typically use the battery for a while (say 1/2 hour to 1 hour), then plug it in and wait to fully charge it, then I pull the plug and use it again for 1/2 hour to 1h and then I repeat this. Takes some getting used to and I forget to do this, but I try.
Just installed 9.10 followed by a 10.04 upgrade (wouldn't work as a 10.04 clean install). The install and upgrade all seemed to go well.
But now when booting I get a message saying "checking battery state" and then it boots no further. This is a laptop without a battery installed, running permanently from the mains through the charger.
How can I disable this check so that the laptop will still boot without a battery fitted?
i'm a college student studying pc programing, and i was given today a special work and i have to program using miranda... which i've never used it >.< can anyone give me a hand to where to download, how to compile, and a simple tutorial for making a simple program or something?
I have a 3 year old laptop with the original battery and its drained pretty bad. The "Battery may be broken" popup was driving me insane and this is how you disable it, in case you are in the same situation as me. Open terminal
Code: gconf-editor Drill down to... apps --> gnome-power-manager --> notify
uncheck the low_capacity checkbox. This should disable the popup for you if your battery has little life left in it. Now, if any knows how to disable the Avahi popup, let me know.
Is there any USB mouse battery indicators for Ubuntu that can tell me the battery level of my Logitech USB mouse? (something like a laptop battery one) I want to add it the panel.
I'm playing with dual monitors. I have an NVIDIA GT220 set up so that my monitor and my TV are running as extended desktops. Everything is working well enough, but there is one annoying bit I've noticed:
If I'm watching ..... on monitor 1 in fullscreen and working on monitor 2, clicking anything in monitor 2 kills full-screen in monitor 1. Is this something that can be fixed somehow or is it a hardwired "feature"?
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again. When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04. nvidia.com) Wed Dec 8 12:27:27 PST 2010
I am having problems with the refresh rate if the screen. In the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center.
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10. On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
I am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.
Currently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
I have the 'Camera Monitor' installed, which works fine and notifies me if my webcam becomes activated.Is there a similar desktop program to monitor the microphone, that can notify me if the microphone becomes active?
