Software :: Sendmail Domain Could Not Be Qualified
Jan 11, 2011
We recently had an issue with our sendmail where the mail that was being sent to certain corporate users was being bounced as the domain name couldn't be qualified. After much sole searching we provided the server with the fully qualified domain name and all was well. When a user sends a mail to an internal user in our organisation it bounces with a user unknown. It would appear that it is looking for the user on this server now rather than on the exchange server where they reside. We have a smart relay address in the config file to ensure the external mail went out correctly.
As an example we have the entry in the host file as:
1.1.5.72 serverx2 foofighters.com serverx2.ad.foofighters.com
The Smart Relay as:
# "Smart" relay host (may be null)
DSxchange1.ad.foofighters.com
On exchange we have aliases as userx@foo.com where the users email address is ser.x@foofighters.com. Now when the mail is sent to userx@foo.com the server sends ok. If you send to user.x@foofighters.com we get a user unknown.
View 3 Replies
ADVERTISEMENT
Jan 17, 2010
I am getting this
[root@ncc1701 ~]# hostname
ncc1701
[root@ncc1701 ~]# service httpd restart
Stopping httpd: [ OK ]
Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 63.123.155.104 for ServerName
[ OK ]
problem is that I have no idea where it is getting the 63.123.155.104 address from. Its not mine and its not the IP of the server..
View 4 Replies
View Related
Jun 22, 2011
How do I put the FQDN in the etc/hosts file, server ip is 192.168.2.101 hostname - promisedland fqdn - promisedland.dyndns.org I just want to set up a web based file server. Here is what i put in hosts (/etc)-gedit
[Code]...
View 3 Replies
View Related
Jun 9, 2010
I am facing an error:"Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using TestServer.localdomain.com for ServerName"When I am restarting the httpd service.Can anyone please tell me what is this error about & how to fix it.bare with me as I am a newbie, so kindly requesting for the easy explanation.steps to set the Domain name.
View 1 Replies
View Related
Oct 24, 2010
Using Debian Lenny I'm getting the following message in my mail: /etc/cron.daily/logrotate:
Quote:
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
View 1 Replies
View Related
Mar 23, 2011
I get the following error while starting apache httpd
Code: httpd: Could not determine the server's fully qualified domain name, using <Server's-ip-address> for ServerName I googled it and have come across the following solutions, all of them involve changing the ServerName setting in httpd.conf:ServerName localhost ServerName www.example.com:80 ServerName <ip-address-of-server> ServerName <hostname-of-machine/FQDN>
I am setting up httpd to be accessed from over a LAN, so i don't have a .com domain name. I am thinking of going with the first option, it seems to be working...
View 5 Replies
View Related
Apr 24, 2011
I have a Centos 5.5 Server, Servername is CentOS1. It has a Forum and a HelpDesk. The Help Desk software SENDS and acknowledgement to the user and emails to all the people on the support desk. Users can reply to emails only by accessing the helpdesk NOT by mail. Thus the server is configured to only SEND mail and not to receive any mail at all.
Mail Server is Sendmail.
Hosts file reads : -
# Do not remove the following line, or various programs that require network functionality will fail.
127.0.0.1CentOS1.tech.xxxxx.com CentOS1 localhost.localdomain localhost
::1localhost6.localdomain6 localhost6
There is NO MX Record because this server receives NO mail, it's send only. Unfortunately, the mail it sends has a From Header which is @CentOS1.tech.xxxxx.com. I want it to send from @xxxxx.com. I've read all the howtos on Masquerading and I've tried many, many things, but with the same results. It will NOT change the From. I had it working perfectly a long time ago with a SuSE server, but I can't for the life of me remember what I did. I know I also battled a bit.
The last few lines of sendmail.mc read : -
LOCAL_DOMAIN('localhost.localdomain')dnl
dnl #
dnl # The following example makes mail from this host and any additional
dnl # specified domains appear to be sent from mydomain.com
dnl #
dnl MASQUERADE_AS('xxxxx.com')dnl
dnl FEATURE(masquerade_envelope)dnl
dnl FEATURE(masquerade_entire_domain)dnl
dnl MASQUERADE_DOMAIN(localhost)dnl
dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl
dnl MASQUERADE_DOMAIN(CentOS1.tech.xxxxx.com)dnl
dnl MASQUERADE_DOMAIN(CentOS1)dnl
dnl MASQUERADE_DOMAIN(tech.xxxxx.com)dnl
MAILER(smtp)dnl
MAILER(procmail)dnl
dnl MAILER(cyrusv2)dnl
I've tried each one of the MAQUERADE_DOMAIN in turn, none of them work and yes, I have remade it.
View 15 Replies
View Related
Jan 13, 2010
i have running sendmail 8.13 on my red hat enterprise linux 5.1, but i have a problem. I can send a mail from my line command terminal to hotmail, gmail, yahoo and any of these, but i can't send mail to my own domain ([URL]), when i wrote a mail i get a reply from MAILER-DAEMON@localhost.localdomain that says that the message had pemanent fatal errors and shows as user unknown the mail was suposed to recive the message.
For example, if i send one mail from user1@mydomain.com to user2@mydomain.com the user2 does not recive any mail, but that doens not happens if user1 sends a mail to any hotmail address or gmail or any other. Besides i also can't recive on my server any mail to user1@mydomain.com or user2@mydomain.com (for example), so please tell me what do i do to get the mail.
View 2 Replies
View Related
Jul 7, 2010
I'm running CentOS 5.4 with sendmail. My computer hostname is bob.domain.com. Whenever I would nc -v 127.0.0.1 25 into sendmail I would get bob.domain.com on the banner. Whenever I send out email the emails would be user@bob.domain.com. I wanted the email to show up as user@domain.com. So in the etc/mail/sendmail.cf file I changed the line
Code:
Dj$w.hostname.com
to this
Code:
Djhostname.com
Now when I enter sendmail I see domain.com in the banner so I know the change took place. However, when I send email using
Code:
mail -s "test" xxx@xxx.com
then email still goes out as user@bob.domain.com. What other changes do I need to make?
View 5 Replies
View Related
Jul 9, 2010
I want to block a domain name in sendmail server. I added the domain name and "REJECT"in /etc/mail/access file. What has to be done for the changes to take effect? when i run make command in /etc/mail dir i get following error : make: Nothing to be done for `all'.
View 1 Replies
View Related
May 21, 2010
I am using sendmail. I want to apply sendmail restriction so that nobody cannot send any mail to other domain.my domain name is msp.net
E.g. 1. rahul.com 2.kumar.com
I want to send mails only above two domain only.if any user want to send mail to other domain. It should be not reach. What should I change in sendmail.mc or in my firewall?
View 2 Replies
View Related
Feb 26, 2010
I have sendmail installed in my home machine and also dns is configured and also I have configured mx for mail server. My dns is unregistered and my question is that can I send mail to external account like yahoo or gmail to check whether my is working or not.
View 1 Replies
View Related
Apr 28, 2010
I'm Trying to setup Sendmail to work with my domain in my server which is :
Code: Linux Centos 5.4 My server can send mail locally to users in my Linux Box and it can receive mails from yahoo and other mail providers in the web, but when i try to send mails to yahoo or others it send me some mail delivery message which is :
[Code]...
View 8 Replies
View Related
Mar 22, 2011
From my main Postfix SMTP heads, I am sending just a couple select emails (primarily support emails) off to a server that receives them and pipes them into the support software. So far this totally works perfectly and I am pretty happy with the configuration. However, in order for sendmail on the support server to receive those emails I have to place them in the virtusertable of course, but I also have to activate their domain in the local-host-names file. That then causes sendmail to consider itself as the destination server for that whole domain.Is there a way to make sendmail receive email for select addresses without making it think it's the server for the whole domain? This server is only receiving email from two specific smtp servers, so I wonder if I could just permit relaying? Wonder if that would just cause a giant loop though.
View 1 Replies
View Related
Apr 9, 2010
I have a server "test1" in domain [URL]. I installed sendmail on it. I have another mail server "mailsrv" installed in [URL] which is my primary mail server and contains all accounts and mailboxes. Now when I send email to [URL] from [URL] it sends successfully. But when I try to mail to user1@abc.com it tries to search user1 in [URL] but I want it to forward this mail to mailsrv.abc.com over SMTP port. Delivery will then be taken care by [URL]
My log shows following
Code:
Apr 9 18:37:06 test1 sendmail[7512]: o39Db6Hs007512: to=user1@abc.com, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30047, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o39Db6Il007513 Message accepted for delivery) It should not go to relay=[127.0.0.1], it should go to relay=[10.10.10.1]
View 4 Replies
View Related
Apr 4, 2011
We have a Windows 2K8 domain with Exchange 2010. I have setup a Ubuntu Server to be used as an internal wiki. Installed AMP on it and have MediaWiki running. Now I would like to setup SendmailToWiki extension. The only problem is that I do not know how do I make sendmail to work inside the LAN her with the Exchange server? This is the extension: [URL]
The e-mail address that is used in the extension is dynamic(changes for every user, since each user sets its own pinkode). And the script sets the domain part off the email to the last part off the IP of the ubuntuserver. For example: wikipost+2.12345@62.85. I cant send an email to half of an IP, can I? What I need to configure or not?
View 2 Replies
View Related
Mar 18, 2011
What configurations will be required in DNS and sendmail server to send mails from one domain abc.com to other domain xyz.com.
View 1 Replies
View Related
Jul 23, 2009
I used Zimbra since a week ago to my centos 5 server, but now I'm using google apps. Today I tried to uninstall Zimbra and restore sendmail, but when I try to send a mail to local domain, it responds with an unknown user message and don't deliver the message to google mail.What I forgot in reconfiguration?
View 13 Replies
View Related
Jan 21, 2010
I have an issue with sendmail. I need to configure sendmail to send email from command prompt to any domain. This is just for the notification purpose. I installed sendmail and sendmail-cf and sm-client. The following are the configuration I have done.
/etc/mail/sendmail.mc
1) dnl # DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
2) m4 /etc/mail/sendmail.mc > /etc/mail/sendmail.cf
3) /etc/hosts = 127.0.0.1 localhost.localdomain
/etc/hosts = 192.168.2.50 mysystem
4) /etc/hosts.allow = sendmail:ALL
[Code].....
View 1 Replies
View Related
Mar 23, 2011
dammit... all that typing and I hit the wrong "submit" button. *sigh*
Ok, I have a couple of SMTP servers for our infrastructure. They are running Postfix. I have them configured so that specific email addresses such as support@mydomain.com and billing@mydomain.com all go to a new support server that I am building with osTicket. Lets call that server SUPP1.
SUPP1 runs sendmail from the default install of CentOS 5 i386. At this point everything runs great. New emails get added into the osTicket system via a pipe in sendmail. Here's where the problem comes in. In order to accept mail, sendmail has to have the domain listed in local-host-names and the addresses in virtusertable. That works just dandy. But in doing so, sendmail believes it is the destination SMTP server for "mydomain.com". That means that I can't send mail from that server back into my normal SMTP servers. So things like the LogWatch, cron jobs, etc can't send notifications. Is there a way to work around that? For sendmail to ignore local-host-names for outbound email or something?
View 1 Replies
View Related
Nov 1, 2010
I am using webmin for my daily tasks. I have fedora 13, whenever I click on ''Sendmail M4 Configuration'' or Outgoing Addresses (generics)'' I get the following error message
Quote:
The Sendmail M4 configuration base directory /usr/share/sendmail-cf was not found on your system, or is not the correct directory. Maybe it has not been installed (common for packaged installs of Sendmail), or the module config is incorrect. I read documentation at sendmail.org, it seems that structure of directories for send mail has been changed in version sendmail-8.1.4 shipped with FC13. In webmin config module we have
Quote:
Sendmail M4 base directory = /usr/share/sendmail-cf
which is not there. I did a locate / sendmail-cf on the command line, it finds nothing
View 17 Replies
View Related
Jul 13, 2010
I have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
#
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
#
[code].....
View 2 Replies
View Related
Apr 1, 2010
I recently modified sendmail.cf to use a third party SMTP server to send emails. It works great. But when I run sendmail from the command line, I have to specify the -C flag and force feed it the location of my sendmail.cf, or else it doesn't work.
So in other words, the following works great:
However, if I don't specify the -C flag, sendmail doesn't consider what's in the sendmail.cf and barfs:
I don't run sendmail as a daemon. I'm only using it to send emails. I know my modifications of sendmail.cf are correct because it works perfectly when I use the -C flag. I searched my disk to see if I could find another sendmail.cf on the machine and only the one in /etc/mail came up.
Why sendmail is not reading my sendmail.cf?
I'm running Sendmail version 8.14.2 on Fedora Core 8.
View 1 Replies
View Related
Jun 9, 2010
I was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...
View 2 Replies
View Related
Aug 17, 2009
I want to give Administrator privileges to Root user in Linux Domain Controller
View 12 Replies
View Related
Apr 12, 2011
iam using centos5.2.configured qmail,vpopmail. while adding domain form vadddomain<domain.co.in> At first time domain folder get created in domains directory.and also postmaster user also get created by default.And also in mysql. Now the problem is after some times or rebooting system domain get erased automatic.also in /var/qmail/users/assign file domain name get erased.
View 1 Replies
View Related
Apr 7, 2011
i had created domain but not getting domain in /var/qmail/user/assign file.also it error /home/vpopmail/bin/vdominfo abc.co.inInvalid domain name
View 2 Replies
View Related
Feb 16, 2011
i have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.
View 3 Replies
View Related
Jun 15, 2011
I have bees assigned a problem which states that :
sendmail-2: Wrong number of instances of process sendmail:, expected instances equal 1 but found 0
THats it...what exactly this means and how should i proceed for solving this problem...
View 1 Replies
View Related
Feb 3, 2010
At work, we run Windows... Windows domain, windows workstations, etc. Today my boss asked me my thoughts on running an Ubuntu lab within the mixture of our existing Windows setup.
Well, that brought several questions to mind. So I understand you can bind an Ubuntu computer to a Windows domain, seems easy enough, whether you do it through Samba or the other guide I read that I kind of forget at the moment, but anyway...
I was just curious how Ubuntu interacts with domain users when on the windows domain. For example, if we have an Ubuntu machine on the Windows domain with a local user "administrator" and that's it, would any domain users be able to log into the Ubuntu work station, similar to how it is on Windows?
View 7 Replies
View Related
