I want to correct the English in a pdf. I load it in PDFedit, twiggle it, and press enter. But I get the error 'file is read only' I made sure the file was a whore, gave it permissions such that anyone could read or write it. Also in the PDFedit options I enabled 'allow editing of read only files' No joy!
View 4 RepliesI want my samba to keep my windows attributes exactly what the user setted in windows I mean if it has read only file in win box and copy it to samba share ,samba keep it read only and same for other attributes but it does not do it now with my configuration:Quote:
[global]
workgroup = DOMAIN
server string = File Server
[code]...
I recently installed the PDFedit, but when I use many buttons are inactivated, I dont know why, is not the permissions.
View 1 Replies View RelatedSlackware 13.37 64 with multilibs I cant get pdfedit to build it keeps quitting at cant find qt
I installed qt3 from slackbuilds and build it
Don't have the exact error as I had to leave my machine at home .
When I do #./pdfedit.SlackBuil I get the information in the terminal:
[Code]...
Whether we want to checking PDFedit prepare-core-dev package ... yes Whether we want to checking build PDFedit gui ... yes configure: error: QTDIR environment variable must Be Set
Until now i haven't had to dabble with bash scripts.
I have a program that reads in data files. These are named datafile01_R, datafile01_G, datafile01_B, they then increment, so datafile02_R etc i have about 600 of these. the program reads in 3 data sets at a time from each run, so files_01 r, g, and b.
The program then does its magic, and outputs about 40 different files, depending on the file, they gone to folders named R, G, B, psa, or tracking.
The program itself has configuration files to say where the files should gone when analyzed, there is also the config files that reads in the data sets.
At the moment i have to run one set of data, then go in and manually change the input file location, and run again. But, doing this, even though a different data set, the new set overwrites the old set in one of the output folders. So i need a way to increment the output filenames after they are written and before the program is run again with the new data set.
I am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
View 4 Replies View RelatedIs there a way to at least convert these files to a different format without using MS Office? I have no access to MS Office (100% non MS user) and I wasn't able to open a .docx file with OOo or AbiWord.
View 9 Replies View RelatedI cant get to my files on my PSP. It says that its FAT32 formatted. I cant make a new partition without removing the files on it.
View 2 Replies View RelatedI've set up an NFS server on my MacBook, and mounted it on my Ubuntu desktop. Everything works fine, except all the files are read-only.
[Code]..
I was trying to uninstall all my audio drivers/software because of conflict issues.Anywaysomehow I corrupted/deleted/destroyed important stuff. When I try to boot I get this message, "Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure them yourself". I tried doing some of the various things suggested on the forum, to no avail. It wont let me log directly to the computer at the any terminal it offers because it wont accept my user name etc. Anyway, I partitioned the drive and loaded a fresh copy of 10.04 (which is what I already have) and would like to view the files on the corrupted side so I can import my urgent documents.
View 4 Replies View RelatedI have a .dd file from testdisk on an external hard drive. how do I mount this image to read it?
View 9 Replies View Relatedmy USB has become read only and i cant copy any files onto it...
View 3 Replies View RelatedHow to see the first/last lines in a zip file (like head/tail commands)? The zip file only contains one file of big size.
Also, is it possible to read the lines from the zipped file one by one in C++ programming?
It's not a good idea to unzip it first due to its big size.
know the basic command for reading the README file after you tar the program using terminal Ubuntu 11.04.thx
View 2 Replies View RelatedLinux kernel 2.6, GNU, Slackware 12.0
KDE 3.5.7
How can I read .docbook files? If I click the name in the desktop, it asks me for an app to open it.
I have 2 pty devices (/dev/ptya0 -master & /dev/ttya0 -slave). i am able to open both devices. Both devices file descriptor is same. i am writing to master pty but while reading from the slave its not reading.
Sample code:
Slave:
I'm attempting to build a load balancing cluster for shared web hosting clients and the only thing left is security. Given the track record with some of these sites, I don't trust them being centralized. We've had rootkits on some of the other servers that replaced system binaries, mostly ssh to capture passwords. I figured the only real way to lock it down tight enough to keep this from happening is to use a live cd for the filesystem or read-only toggle USB stick. But I also need to mount a rw drive to store the clients data and config files that are bound to change.
Is this really the way to go about this? If so do I simply make a live cd iso and edit the files within to handle mounting a rw hard drive and linking data and configuration files to that drive? I've considered just leaving all the data on the physical hard disk and mounting it as ro on boot for binaries and such but can't that just be changed with the right permissions?
After a motherboard crash I have a problem. i have a LVM2 partition that is placed on 2 different physical disks that i need to read. Since I am pretty new to Linux/Fedora a friend helped me to install the system on my old system so i am not sure if the disk is formatted as ext2,ext3 or xfs. How do I mount these 2 disks to be able to read the files? when i run fdisk -l I got:
[code]...
There is explore2fs, but it does not support ext4 filesystem.
View 1 Replies View RelatedI'm needing to read the Adam's Assembly Tutorials, that are old EDIT *.txt files, I'm on Linux and I need to read this files.What can I do?Is there any GUI editor that can read the files?There is any way to convert them into another file that is more modern1?
View 2 Replies View Relatedi know that chmod +x makes a certain file executable but how do i make a file read and write.
View 3 Replies View Related[Sorry if this is misplaced; I just couldn't think which category to put it under.] So yeah, I'm almost exclusively using karmic (yay!), but I still have to use that vista install I have smushed in a corner of my HD from time to time. Now, I installed karmic using the default, latest file system (ext4, I believe it is, right?). Last I remember hearing, that presents a bit of a problem, doesn't it?
View 5 Replies View RelatedA real os should at least e able to read and write plain text, you think? But no, when I try to open my text files (mainly made with gedit) some characters are ass, swedish letters rarely work and ', ", / and so on are not represented as the characters I want to see. Is there a easy, fast way to read (and print!) my text files at school, where they have only windows, without spending half an hour fixing the file by hand?
View 6 Replies View RelatedMy Freenas server is currently off line for the moment pending the arrival of some thermo paste and I need to get some files off one of the drives. The drive is formatted in the UFS file system.I am using a usb to sata converter to hook the drive up to my laptop which is running 10.04.I am then able to browse the files by going to my /mnt folder. The problem is I cannot copy any of the files. I get a permission error. I have tried chmod 777 command to change the permission but I get an error about it being read-only. I tried running nautilus as root to copy the files but I still get a permission error. Using nautilus as root to change the permission or alter any of the read/write options fails because the drive is read only.
From what I understand I can only mount the drive as read only because its UFS and I can't change the permissions because its read only. Sounds a bit like an endless loop lol.Running Freesbie (freebsd live cd) didn't do me any good as it didn't even detect my hard drive and I don't want to learn a new OS just to transfer my files.ny advice would be appreciated. I really don't want to wait until my thermo paste comes and I will be on the road for the next couple of weeks so I won't even be able to get it setup. I need these files now.
I'm trying to delete files on a USB disk. If I try using terminal using rm, because files are write only. I can't change this, even as root using chmod or unmount mount. When I use fdisk I still can't reformat, either as superuser or root. I get the following :
Disk /dev/sdh: 16.1 GB, 16064184320 bytes
7 heads, 37 sectors/track, 121140 cylinders
Units = cylinders of 259 * 512 = 132608 bytes
[code]...
Are there any Linux apps out there that are able to READ .eml files, NOT convert them?
View 3 Replies View RelatedI've recently upgraded to 10.04 and have noticed that all the files or folders I've been creating recently are read only. I can manipulate the folders on my ubuntu system itself and create new entries, folderes, subfolders, and save files. IE a payment receipt in pdf format. However if I then try to move or copy any of these to my DROBO (data storage device) the file gets the LOCK Icon on it and becomes read only. If it is a subfolder I can no longer copy to it and if it's a regular file, say a pdf or flv I can't modify it. Attempting to change the file permissions on either my ubuntu desktop or any other folder works but once it goes to the drobo I lose the ability to change it off of ---. Again, this was all working fine before doing the upgrade to 10.04. Yes I did do a clean install to 10.04.
View 6 Replies View RelatedI burned these very important data files on the large DVD discs and now Ubuntu can no longer see them. It can only see the file folders but the files are still there. I took a bad screenshot with a camera but you can still see that the files are still there.
View 9 Replies View RelatedI had some problems with my hdd, I fixed most of the problems with "testdrive" or "testdisk" (cant remember) but I have some bad sections on my disk right where my important data is. I made a backup with "dd" from a live cd. I have the backup with a reading error or 5 so I guess most data is safe? I have the backup of the whole drive on an other hdd and now I need to get just a few folders out of it. I tried in windows but I can't read it. Poweriso can but not the privet folders like /var/ and that folder I need. I had a password on the account so I guess that is part of the problem? How to read the backup file in windows?
View 4 Replies View Related