Slackware :: Audacity: Is It A Part Of Some Version?
Nov 6, 2010
Slackware 12.0 I have installed only CDs one and two of the set of slack 12.0 CDs. According to Slack, it's all I need to make the system work. Now I've done
Code:
bash-3.1$ locate -i audacity
/usr/share/icons/mono/scalable/apps/audacity.svgz
/usr/share/apps/kappfinder/apps/Multimedia/audacity.desktop
bash-3.1$
and I am wondering where these two files can have come from. I get the same output if I run locate as root. May be the whole audacity package is somewhere in the rest of the disk set. But I have no way to find out, except downloading them one by one and reading throu the PACKAGES.TXT files. Unfortunately, the slackware.org no longer supports its package browser.
EDIT: there is only one PACKAGES.TXT file in the distro, and it is on disc 1. And audacity is nowhere mentioned in it. Corollary: My slack distro does not include audacity. But then, what are those two files doing in my system?
View 5 Replies
ADVERTISEMENT
Jun 10, 2010
Does anybody know where (or how) I can get Audacity for Slackware 13.1?
View 14 Replies
View Related
May 10, 2010
I am trying to record in Audacity in Ubuntu 8.10 64 bit on a Dell Studio 1535 laptop.The problem is not that its not recording, per se.Rather, the problem is its not recording the way that I want it to.
Its recording from the built-in mic, and I want to use the mic jack instead as a line in from a guitar (well, technically, an acoustic-electric resonator, but its close enough to a guitar to call it a guitar).
I have tried using various devices for recording, and changing settings in both the Volume Control and Sound Preferences, but no matter what I do, Audacity still records from my built-in microphones, instead of from the line-in.
View 9 Replies
View Related
Jul 22, 2010
I am browsing the package list for Slackware 13.1, accessible through Slackware.com>Get Slack, and I see the package containing the Gnome desktop enviroment nowhere in the list. Should I conclude Gnome isn't part of the Slackware distributions?
View 14 Replies
View Related
Oct 27, 2010
I just installed Audacity from Alien Bob's packages, but it won't launch.
View 5 Replies
View Related
Jan 3, 2010
Is the future Slackware release 13.1 going to be default multilib...?
View 14 Replies
View Related
Dec 8, 2010
I just used dd to clone a linux partition to a new hard drive, it had 800mb left on the old hard drive, after dd, new hard drive lists 1.29/1.3 terabytes full. Is this what happens by default in dd? How can I fix this?
View 1 Replies
View Related
May 24, 2010
I'm trying to figure out how to access the local part and the domain part of an email address in postfix's main.cf. For example, myname@mydomain.net has myname as the local part and mydomain.net as the domain part.I get the whole email address with %s. I want to speed up the lookups by writing better database queries.I've had no luck finding this in the otherwise well documented postfix.
View 2 Replies
View Related
Jul 13, 2009
we have access to one domain name , 1 internet ip address and may servers hosting different part of site. I want them all to be accessed via same web site . some of the server in our network are embedded devices.they have their specific utility being hosted on that machine. So the severs are bound to be distributed . I just wanted to know how can I access them via single ip, domain name.
View 6 Replies
View Related
Jan 14, 2010
In bootseqence of linux, the first step is check the CMOSRAM(size 64bytes) setup for custmor setting. So i am just confused wether CMOSRAM is a part of motherboard or is a part of RAM itself.
View 4 Replies
View Related
Feb 5, 2010
why isn't there a 32-bit version of libglu in /usr/lib? I try to run a 32-bit program on my multi-lib Slackware current install but it complains that it can not find libglu.so. This used to work well, don't know what I changed. I have updated mesa from git and mesa-compat32 is installed.
View 6 Replies
View Related
Mar 18, 2011
[URL] I am trying to update alsa from version 1.0.21 to 1.0.24 and am having some issues. While trying to build the alsa until I get an error. I've been googling around and so far have found nothing. I was getting more errors earlier but that was solved by installing xmlto.
Code:
root@Jacob:/home/ethan/Downloads/alsa-utils-1.0.24.2# make
Making all in include
make[1]: Entering directory `/home/ethan/Downloads/alsa-utils-1.0.24.2/include'
make all-am
make[2]: Entering directory `/home/ethan/Downloads/alsa-utils-1.0.24.2/include'
[code]....
View 7 Replies
View Related
Jan 23, 2010
I have just installed Slackware 13.0 64 bit on my laptop. I am trying to get my wireless card (Broadcom BCM4318) to work. It is dual boot with Windows XP 32 bit. I tried the ndiswrapper and everything seemed to go okay but when I ran ndiswrapper -l it said it was the wrong driver. Then I realized I was using the 32 bit driver from my windows install. Is there a 64 bit driver available. I can't seem to find one. I have searched the broadcom site but I guess this is too old for them to support. I previously used Zenwalk 32 bit on the laptop and ndiswrapper worked great. Should I be able to find a 64 bit driver or can I get the 32 bit to work? Do I need to go back to a 32 bit OS? I found the proper driver using google, downloaded, installed with ndiswrapper, rebooted and everything works. It connected automatically.
View 1 Replies
View Related
Oct 26, 2009
This may sound a bit of an awkward question, but I have this app, Salome-Platform, [URL], It requires Python 2.5 at most to be able to run. (Compiling it is way to complex.) Since the Python of Slackware is 2.6, can it be downgraded to 2.5...? If it can, how do I do it...?
View 15 Replies
View Related
Jun 24, 2011
I have, installed in my machine, Firefox 2.0.0.4 and, wishing to add certain feature , I went to ftp.nluug.nl /pub/os/Linux/distr/slackware/slackware-12.0/patches/source/mozilla-firefox/. Firefox 2.0.0.20 has that feature. But, despite teh presence of the .SlackBild, threre is no compilation here. It's a patch realized over the binaries already installed in my machine. The question is: How does the .SlackBuild know he is in the presence of 2.0.0.4? That is, he cannot update if he does not know from where it is starting.
View 7 Replies
View Related
Feb 23, 2011
I installed slackware 12.0 on one partition of my pc. but slackware 13.1 has been released, how should i update my system to 13.1?
View 7 Replies
View Related
Feb 15, 2010
I'm trying to install bibble5pro. The only packages they provide are binaries:x86_64.deb, i386.deb and i386.rpmI converted the rpm binary to tgz and installed it on my slackware-current (works fine).Then I tried to install it on slack64-current and slack64 13 (both multilib). I tried both rpm2tgz and deb2tgz. The .tgz package gets converted and then installs without any errors. When I run bibble5pro I get the following:
Code:
Install Path: /opt/bibble5pro
LD_PATH: /opt/bibble5pro/lib:
[code]....
View 4 Replies
View Related
Dec 18, 2010
I just installed SLACKWARE from ISO image, but don't know the version, the release is 2.6.27.7-smp.
View 4 Replies
View Related
Dec 16, 2010
So I installed the latest Thunderbird security update without bothering to check what version it was and found that I had "up"graded from 2 to 3. Despite selecting 'no synchronization' on all my archived Gmail labels it still started downloading many gigabytes of archived email. In Thunderbird 2 I had just the headers of the archive and that suited me fine. So a warning about installing the latest updates without checking and a question: Is there a Thunderbird 2 package for slackware 13.1?
View 1 Replies
View Related
Jul 8, 2011
It seems that the edition of GnomeSlackBuild for Slackware 13.37 has not been published yet ?Does the current run stable ? or the old version ?
View 7 Replies
View Related
Mar 18, 2010
I am trying to install a SDK into my linux machine...but the GCC version used to build the kernel for that particular SDK on the target machine is different from the GCC version I am using. How to overcome this problem without any need for me to change my GCC version?
View 1 Replies
View Related
Mar 3, 2011
I was fiddling with some svg icons and I needed a slack svg logo: looking on the propaganda page, I spotted this jpg that looked like a nice and clean candidate. So I fired up inkscape and tried to manually trace a (manageable) svg version out of it. Then I thought that maybe an editable vector version of it can be useful to someone else and, as asked by Pat, I release it here under the GPL. [URL]. (gotta say I haven't looked around if any other logo svg has been posted before, but, clicking on the "Click Here to Find Similar Threads" found this funny one )
View 12 Replies
View Related
Mar 31, 2010
There seems to be a typo on Slackware.com security advisory webpage for the updated ssl packages (but not for the actual packages on ftp.slackware.com). The webpage says this:
openssl-0.9.8m-i486-1_slack12.2.tgz
openssl-solibs-0.9.8m-i486-1_slack12.2.tgz
The package in the ftp.slackware.com/12.2/patches/packages repository is:
openssl-0.9.8n-i486-1_slack12.2.tgz
openssl-solibs-0.9.8n-i486-1_slack12.2.tgz
I am guessing its a typo on the webpage because I already have an 'm' installed.
View 3 Replies
View Related
Jul 12, 2011
I am a complete noob in the Linux community, having JUST installed my first Linux distro on my PC (that being Slackware 13.37).That having been said, please be patient with my TOTAL confusion is this regard : How do I determine which version of a package I need to download (in this example, I will use Yakuake, a program I AM trying to find at the moment!). I have done searches on the internet of the type"Yakuake for Slackware", etc., and I have always found results that I believed were a link to the correct version. However, when I finally have the package downloaded (I have downloaded BOTH source packages as
well as the build app.), they are always for a DIFFERENT VERSION!
This is most frustrating...; is there a "listing" of different packages that are compatible with a specific distro / version? I realize that, in many cases, I may require a newer version of a library, etc., but again, how do I determine this ahead of time, before I bother downloading the actual app. I wish to install? I can use another example - I attempted to install OpenOffice; I began by searching for OpenOffice for Slackware / KDE (as some sources indicated that Gnome was the required gui for this package...).I found a site with an install cd .iso that was supposed to be multi-platform KDE compatible, but NONE of the versions would install on Slackware 13.37... - you get my point?
View 3 Replies
View Related
Jun 24, 2010
I have several server (mailserver, webserver and lot of fileserver) all are 32 bit slackware and I am satisfied! My company plan to upgrade our server and buy a 64 bit server maybe amd x3 or opteron? Is slackware 64 bit will help boost my server performance? Or will I stick to 32 bit for now?
View 7 Replies
View Related
Jul 5, 2010
How to update my version of glib in order to install the latest version of Midori on slackbuilds.org - [url]
Midori relies on WebKit.
When I try to install WebKit using the slackbuild script, I receive the following error:
I don't see a newer version of glib-2.xx on slackbuilds and I'm hesitant to install from source over the currently installed version.
If there's no updated package, can anyone provide guidance regarding installing new glib from source ---
[url]
View 14 Replies
View Related
Apr 10, 2011
Does anybody have a Slackbuild script which delivers a version of Digikam more recent that 1.2 (which is what is on offer in Slackbuild.org) ? I have had that installed for some time and it works well (apart from geotagging which seems to be only partially developed) but the Digikam website has released 1.9 (stable) and 2.0 (quite advanced beta).
If anybody has successfully packaged any later versions for Slackware I would be grateful for information. Otherwise I will start building myself.
View 6 Replies
View Related
Apr 1, 2010
I want to upgrade Apache, PHP, and MySql from a default version I'm having in my installed Slackware. What is the proper step to do this? Will it cause some problem if I upgrade them?
View 13 Replies
View Related
May 16, 2010
Im having a battle for quite some time now with lastest intel driver now and wondering if someone has solution. Ive checked :[URL].. and i decided to have exact same version of everything listed in there installed on the system.
I have few questions since i manually builded xorg-server 1.8 im wondering what packages are dependent for x11 to be upgraded so everything run smoothly for xserver 1.8. are those xf86-input* and xf86-video* the only one or there are other packages that i have to get rebuilded? the second question: im wondering if im the only one for that having a problem of that lastest driver dosent work for me, for the purpose i rebuilded the driver and libdrm 2.4.20 with kms enabled once i installed xorg-xserver 1.8.0
heres log problem:
Code:
214.704] (II) LoadModule: "intel"
[ 214.704] (II) Loading /usr/lib/xorg/modules/intel_drv.so
[ 214.704] dlopen: /usr/lib/xorg/modules/intel_drv.so: undefined symbol: resVgaShared
[ 214.706] (EE) Failed to load /usr/lib/xorg/modules/intel_drv.so
[ 214.707] (II) UnloadModule: "intel"
[Code]...
View 13 Replies
View Related
Mar 23, 2011
I have installed and configured Slackware 13.1 and it works perfectly. Now I'm going (actually forced) to downgrade kernel version down to 2.6.32. Is there any caveats? Do I need rebuild any other packages from sources?
View 13 Replies
View Related
