Ubuntu :: Edited Xorg.conf And PC Won't Start
Jun 7, 2011
My PC running 11.04 was showing a blank screen after every 10 mins while watching BBC iplayer (with all the screensaver and power saver settings switched to over 1 hour). The picture returned when I moved the mouse but it was still annoying.
So I googled for a solution and found this page [URL]. Based on this, I did the following in terminal:
"sudo gedit /etc/X11/xorg.conf"
Then when the text editor came up, I deleted 'EndSection' from the xorg.conf file, and added the following lines:
Section "ServerFlags"
Option "blank time" "0"
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"
EndSection
My problem: upon rebooting the computer, I just got a purple screen with the Ubuntu logo, it went no further. I tried booting with the livecd and removing the lines I added, but it wouldn't let me save the file. I also tried booting into recovery mode but I'm not very adept at the command line navigation stuff, so I don't know how to find or re-edit the file.
View 9 Replies
ADVERTISEMENT
May 3, 2011
I have Natty Narwhal and everything was working. Then I moved it to my HDTV, and I had overscan issues. Following some advice I found online, I edited /etc/X11/xorg.conf with new information including a ModeLine.
Upon restart, I get my BIOS screen, the Ubuntu splash, then... nothing. The display goes to sleep. I can ping the computer, and everything seems to work except I have no video.
I did backup my xorg.conf file, but I don't know how to get to it without a display. Hindsight tells me I should have given myself a way to remotely control my computer before messing with xorg, but you live and learn.
I've read online that there is a way from the login screen to get to Terminal without loading the desktop environment, but I can't get to the login screen.
I've also tried using a Linux LiveCD to access my filesystem, and that works to view files, but I have no root privileges.
Is there...
...a way to get to Terminal without loading the login screen?
...a way to give myself root access to my harddrive from a LiveCD?
...something else to try?
View 1 Replies
View Related
Jul 8, 2011
I tried to edit my xorg.conf to try and encourage Debian to handle my joypad better (stop recognising it as a mouse). However, it didn't work and i couldn't get back into X.So, i entered recovery mode and deleted the contents of xorg.conf,got back into X and then edited xorg.conf back to how it was.Right so far so good.Yet, now i cannot use the backlash key in keyboard shortcuts. I have a number of shortcuts set up to incorporate this key and they no longer work, neither in GNOME nor Openbox
View 2 Replies
View Related
Dec 11, 2010
I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
View 8 Replies
View Related
Apr 9, 2010
I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
View 11 Replies
View Related
Feb 16, 2011
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
View 3 Replies
View Related
May 3, 2010
I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
View 3 Replies
View Related
Dec 4, 2009
I wanted to change screen resolution manually from xorg.conf and apparently a missed it up and my fedora core stucks and wont start, how can i start fedora in command line (so that i can remove xorg.conf), i tryed ctrl+alt+f1, ctrl+alt+backspace and still cant start in command prompt.
View 10 Replies
View Related
Jan 26, 2011
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
View 5 Replies
View Related
Jul 29, 2011
I installed vsftpd on my fedora 15 system. I tried to edit vsftpd.conf through gedit
(as root su - command). It showed an error message. I couldn't edit this file. Is there any way to revert my system to gnome 2.30(which is better to work ) from gnome 3
View 4 Replies
View Related
Jan 22, 2011
I wanted to save a bit of ram and so removed wicd from startup. I deleted rc.wireless.conf and edited rc.inet1.conf as per the instructions. A connection is made at startup but it seem to drop quite often ( not too hard to restart, but a bit of a pain ). I am running a k-2.6.37 with a zydas usb zd1121 chip
Quote:
# /etc/rc.d/rc.inet1.conf
#
# This file contains the configuration settings for network interfaces.
# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
[Code].....
View 3 Replies
View Related
May 22, 2011
I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
My xrandr command that I use to fix it all is:
xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
View 1 Replies
View Related
Feb 21, 2010
I'll preface this by saying i'm by no means an expert on Linux. A competant beginner at most.We have a dedicated server, the 'resolv.conf' was changed, specifically the domain that was listed (this is the primary domain).I only became aware of this change, when we get into work on Friday and all our sites were down - I attributed this to DNS fault as if I changed my host file (I work on a windows machine) and specifically routed to the domains to the correct IP address, the websites were served fine.I tracked down the resolv.conf change by quizzing a collegue. I then switched the resolv.conf file back to it's original state - luckily a backup was made so I am 100% sure that the current resolv.conf is the correct one.
change was made Friday morning, around 9.30am (UK time). It is now 5.05pm (UK time). The original change was made sometime on Weds afternoon, and the sites stopped serving between Thursday night and Friday morning.Does anyone have any idea how long it should take for the fix to be picked up? Will it be picked up? I just started to think that the change can't be picked up due to some DNS related voodoo.
View 4 Replies
View Related
Dec 30, 2010
I've recently installed Proftpd to host for someone for a couple of hours.
With the default config it works however when taken the comments out and edited for anonymous, proftpd fails to start
This is the default config file which works if you have a user and password for my machine, but anonymous wont work (when the comments were removed).
View 1 Replies
View Related
Aug 18, 2010
i i use ubuntu 10.04 and i buy a mouse, and i cant install it. i read on forum i need to put :
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
[code].....
wireless via Bluetooth � 3-button laser mouse with scroll wheel � resolution 1600dpi, adjustable on 800dpi � range up to 10m � computer with Bluetooth or dongle required � 2x AA batteries required
View 14 Replies
View Related
May 26, 2010
i have VIA UniChrome Pro IGP grapgics. When i install linux max resolution 800x600@60hz and xorg.conf file are blank
some time ago i used fedora "xrandr" works great. But i don't liked fedora, as ubuntu
so i need program thats have option "Model"
Example: LCD 1028x768 or other
View 2 Replies
View Related
Jun 6, 2010
I've got an i5 Macbook Pro, on which I've got Ubuntu 10.04, which I use 90% of the time (mainly for work).
I've added a few lines to xorg.conf to make the graphic card run cooler and thus get some more battery life. Sometimes, though, I do need full graphic potential, for which I have another xorg.conf prepared without those lines, so I can switch back and forth when I need it.
Currently, to change back and forth, I rename the files accordingly and reboot, which is a pain in the neck. I tried restarting gdm after switching files instead but it didn't quite work (maybe I wasn't doing it correctly).
So, fellow experts, what's the easiest and fastest way to switch between two different X11 config files?
View 1 Replies
View Related
Oct 13, 2010
I've just installed the latest ubuntu (10.10) on vmware workstation and noticed the resolution is not 96 dpi so my fonts look a bit unsharp
I wanted to change that and noticed I don't have an /etc/X11/xorg.conf? So my question is of course...where should I put the "Option..." line to change it to 96 dpi?
View 1 Replies
View Related
May 7, 2010
Ubuntu 10.04
I can't find xorg.conf on /etc/X11/ How to create it?
View 7 Replies
View Related
Jun 2, 2010
Sorry if this was well covered here when most up-to-date Slackers moved to 13.0, but I have just jumped from 12.1 to 13.1. Generally very happy that I do not have to think about xorg.conf as I always found the structure of this conf file a tad confusing. However if I do need to (for example) change my video driver (I might for example want to try the nvidia driver from NVIDIA) or configure my touchpad - how do I do this ?
I understand that xorg.conf can still be created. If I do so, do I have to put all the stuff in that used to be there or can I just add the stuff I need to make the changes I am looking for?
View 4 Replies
View Related
Jan 9, 2010
Thinking to be clever, I made some changes to /etc/X11/xorg.conf and now I cannot see anything on the screen after Ubuntu boots up, just a 'mode not supported' message on the screen.How can I log into Ubuntu in text mode in order to fix the xorg.conf problem? I hope there is a "hot key" to stop Grub right before it starts loading Ubuntu and allows me to log in into Ubuntu in text mode.
View 2 Replies
View Related
Jan 12, 2010
i'm stuck with software rasterizing atm on 9.10, on 8.04 i had indirect rendering which was faster. how i can speed things up? :)
this is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code]....
View 9 Replies
View Related
Jan 20, 2010
Since the computer does not have xorg.conf, can I have the computer generate that file because I need to work on it and so I need to create it. That is why it would be useful to have a xorg.conf file still.
View 5 Replies
View Related
Jan 23, 2010
I've been trying to setup dual-screen in my system, but the control panel complains it can't find xorg.conf and so I can't save changes I make in the nvidia control panel. I was trying various methods of trying to get a dual screen working how I like it.Left = 17" 1280x1024 that sometimes works (needs hitting a few times)Right = 21" 1680x1050 main screenI wanted to have everything on the right one, my main workspace. And I wanted a seperate x workspace on the left hand one. (Mainly so that when the one on the left decides to not work, I can use the panel thing at bottom to move apps to the right one)
Now I know since 9.10 xorg.conf is non-existant and so determind on the fly or something.Is there a way to get X to write out the current working xorg.conf that's it's using? i.e. It's auto determind x,y,z and that's what right now this second is being used. I want to save this as a working xorg.conf so I can fine tune it etc.
View 1 Replies
View Related
Feb 26, 2010
I am trying to edit the xorg.conf file as described here:
[URL]
However, I cannot find the xorg.conf file anywhere.
View 9 Replies
View Related
Jun 1, 2010
I started using 10.04 today and it seems that the xorg.conf file disappeared. It's the first time that the default xorg driver works for my nvidia card, and I want to know what drive is this. How can I know what xorg driver the system is using? Is there a command for that?
View 5 Replies
View Related
Sep 13, 2010
After few days of Googling, downloading and testing, I've finaly managed to make a working Xorg.conf for my iMac G3 (Slot-loading, Summer 2001). As many of configs found on the Internet wasn't working for me, I'm posting mine, which is based on data from many configs (some from Ubuntu 8.04, were not working on this new release without adjustments).
Code:
View 1 Replies
View Related
Sep 15, 2010
I have a fresh install of Lucid on my PowerMac G4 Desktop (PowerMac3,6) / 867MHz. Right now I'm stuck with a resolution of 800x600. From what I have read, I know I need an xorg.conf file (install doesn't create one). I've looked around for a working one - and tried creating my own with no luck. I gather the following information is needed:
Code:
*-display
description: VGA compatible controller
product: NV17 [GeForce4 MX 420]
vendor: nVidia Corporation
physical id: 10
bus info: pci@0000:00:10.0
[Code]...
View 1 Replies
View Related
Oct 31, 2010
Just a quick question - with 10.10 where do I save the Xorg.conf?
Is it :-
a) /etc/X11/
b) /usr/share/X11/
[code]....
View 2 Replies
View Related
Feb 21, 2011
I'm trying to improve the functionality of my mouse in my installation of Ubuntu 10.10 desktp 64-bit running inside a VMware workstation VM running on a Windows 7 64-bit host. I stumbled upon some instructions suggesting changing a xorg.conf directive (specifically, change the mouse protocol from "imps/2" to "explorerps/2") which I'd like to try out. However there is no xorg.conf file in Ubuntu 10.10. I tried using Xorg -configure to generate the file and placing it in /etc/X11/xorg.conf, but it seems to make no effect. Using "xinput list" the mouse is still listed as imps/2 even after I changed the xorg.conf file and rebooted. It seems Ubuntu 10.10 ignores the xorg.conf file completely? If that's the case, is it possible to manually specify this setting that used to belong to xorg.conf at all?
View 2 Replies
View Related
