I have installed Mozplugger and changed mozpluggerrc so it opens evince. However, it shows an embedded version in the tab that doesn't accept interactions and opens the version that can be interacted with in a new window. Does anyone know what may be causing this? I'm not very knowledgable with the specific commands in mozpluggerrc.
My current setup for PDF files is as follows:
While troubleshooting firefox 3.5.4 in 64-bit F11 on an old HP laptop with ATI Express 200M, I found the following files
Code:
/usr/lib64/mozilla/plugins/mozplugger.so
/usr/lib64/mozilla/plugins-wrapped/nswrapper_64_64.mozplugger.so
[code]....
I just installed F13 from the Live Installer CD today. Most things are working well, but not Evince.
I can't use it at all to view images nor PDFs.
I get a "Unable to open document error":
[url]
However, eog is able to view the same file just fine...
I have installed some pdf readers on my notebook, and the one I most liked was evince. But there are two available evince packages: evince and evince-gtk. What is the difference between them? Does one of them have advantages as to the other?
View 1 Replies View RelatedIn the Description of Evince, the document viewer supports pdf, tiff, rtf and djvu, but when I want to open a djvu file in Evince, I got the yellow frame saying that Evince does not support djvu files.I searched for a librairy or a plugin for Evince to help it support djvu but I didn't find anything.How to teach Evince to read djvu ?
View 4 Replies View RelatedA couple of days ago mozplugger just stopped working on me, at least for pdf files. I can't open them. When I click on a pdf file, firefox seems to be loading it, but then I get back to the same page and nothing happens. The acrobat plugin works fine, but of course I wouldn't want to use it...
View 12 Replies View Relatedmy printer has a known CUPS bug; A4 is printed as letter size; i.e. printing only appears on the bottom half of the page. I downloaded a ppd file at [URL] but it improved nothing. Also installed the bug's patch (sorry I don't have the bug's number) and followed the instructions; zero results. Upgraded Ubuntu 9.04's CUPS-related repositories to 9.10 but no improvement. Every test page still comes out with just the top third sitting at the bottom.
View 1 Replies View RelatedI thought I solved this in one of the earlier RC for my guide buy it seems to have regressed. It loads adobe reader, but then it only has a grey screen that turns white eventually.
View 7 Replies View Relatedi installed debian 8.2 with gnome 3 desktop environment when i run this command
Code: Select alldconf write /org/gnome/nautilus/preferences/default-sort-order type i got this error
Code: Select allerror: 0-4:unknown keyword
Usage:
dconf write KEY VALUE
Write a new value to a key
Arguments:
KEY A key path (starting, but not ending with '/')
VALUE The value to write (in GVariant format)
what should i do ?
also when i use gsettings i get
Code: Select all(process:4333): dconf-WARNING **: failed to commit changes to dconf: The connection is closed
I have a laptop that doesn't display correctly since installing F10 x86-64. Instead of using the i810 driver, I see the experimental intel driver. I am running on a Dell D630 laptop with the default intel integrated graphics.
Just to note: Running gnome. I tried KDE and I can actually get this to work and display in 1600x1200. I don't want, "well use kde then" to be the solution. Also, in gnome, if I go to the screen resolution option from the menu, the mirron screens is clicked. Even when I detect monitors and unselect the mirror screens and pick the correct resolution, when I click OK, the screen flickers, and I go back to the same screen with the original default values? Wierd.
I got the bright idea to install system-config-display (something like that), which installed fine. I then changed my default resolution to 800x640 just to try it (really want 1600x1200). Well, I decided to reboot. Not the laptop doesn't start, it stops right after loading anaconda, and just won't go any further.
So two questions:
1. What do I need to change to get the laptop to actually boot?
2. How to get the external monitor to display in 1600x1200.
I've added Warsow.i386 (0.5) to my Applications > Games menu as a shortcut, but whenever I try to run it, my screen goes black for a second and then returns to desktop. Running the same file from its folder in /home runs the game fine.Is this common problem with shortcuts or is it just me and the game?
View 3 Replies View Relatedmy "places menu" references folders on a second partion, where I store all my personal files (ntfs, as I use it also from Windows). After boot those folders wouldn't show in Thunar. Some other programs, as Fontmatrix, wouldn't find databases stored there, what messes them up. Thunderbird has problems to recognize profiles etc.What is strange, the partition seems to be mounted at startup as I can see and select it from Thunar. Also, it appears on Desktop. After selecting the partition, closing and reopening Thunar everything works fine, places would show correctly and Fontmatrix database is ok
View 2 Replies View RelatedI use Wine on Kubuntu 10.10.
Whenever some-application to open the Internet, wine browser is opened in loop untill I end process tree of wine server.
Also when I use it to execute .exe program I have error
e.g. I tried to run DriverGuide DriverScan:
Quote:
Component 'Codejock.DockingPane.v10.4.0.ocx' or one of its dependencies not correctly registered: a file is missing or invalid
Does anyone know whats missing ?
I'm using an 'if' statement to check whether one of positional arguments is a word or a construction like "x-y", but something doesn't seem right.
Here is the relevant part of the code:
Code:
if [[ "$3" =~ [a-Z]-[a-Z] || "$3" =~ [a-Z] ]]; then
grepRange=$3; else grepRange=$4
fi
And for the input like this:
[Code]....
but shouldn't the $grepRange variable be blank in this case?
Bash version is 4.1.7(1)
After the upgrade, I've noticed a problem I haven't had before - hibernating worked fine to the last. The problem is, although the system correctly hibernates, it makes no attempt to "wake" from hibernation when I power it up - it boots normally, and with fsck-ing like it was powered off without proper shutdown (understandably). I don't know why it happens, and I've skimmed the logs, but noticed nothing special. What could be the problem? What could I try? Which log should help someone find that out?
View 2 Replies View RelatedI'm running Kubuntu and have tested flash video sites with firefox, chromium and rekonq. I have installed all the available packages from Software Management but flash videos still don't display correctly. All get is a small rectangle of video on the bottom left hand side of the video box (which is otherwise grey).
View 4 Replies View RelatedMy problem is that I cant "rewrite" older password to new. It looks like I do:
Changing password for user johny.
New UNIX password:
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
all looks OK but after set up new password I can log in using OLD and NEW password. It's very unsecure for me. So in fact I cant change password and it looks like centos create next password to one accout and one account have more then one password... how can I prevent it? pls help me couse its very unsecure in my case.user looks in file shadow /etc/shadow like this:
johny:6JWuwPcQiWCCM:14994:0:99999:7:::
in etc/passwd looks like this:
johny:x:20010:20011::/home/gs-world:/sbin/nologin
how to delete all old passwords?
I can't get it to work in Ubuntu. I started in Chrome, where it simply was silent. Then I moved it to Firefox, where it said I needed a plugin to play the media, which I installed. That didn't work. I started following the instructions here, but was unable to install mozplugger.
View 6 Replies View RelatedI just upgraded my computer from Ubuntu 9.10 to 10.04 (beta2) restarted and the splash was screwed i thought meh i can live with it then went into my account switched to tty1(ctrl+alt+F1) and it was the same. got annoyed now asking had anyone else encountered/know how to fix this problem. pictures attached sorry for bad quality took on phone, but that is how it really looks.
View 9 Replies View RelatedI have the following problem: There are three NFS mounts in /etc/fstab, which are automatically mounted. The network connection runs over NetworkManager. Since NWM brings up the network asynchronously, NFS doesn't mount correctly on the first try, but is loaded soon enough since mount automatically retries until it works.
I can live with the fact that I have an error in my boot messages, since everything is up in time for the user. But, I need a (selfmade) upstart script which depends on the NFS mount being up. Even using "remote-filesystems" as the trigger doesn't help, because the trigger is apparently sent after the first failed try (I checked with cat /proc/mounts in my script, the nfs mounts are clearly not up.) Can I somehow force the remote mounts to wait until NWM is up, or make the NFS mount emit an event when the mounts really get mounted?
I recently dist-upgraded from Debian 5 to 6 (squeeze). Since then, the xclock I run from my window manager's start script isn't displaying correctly (it displays only a "0"). The thing is, if I run the same command in my start script in my terminal, it works just fine, as it has always done...
I use this rather "old" X applications because I like my programs simple/not buggy/fast, and it's resulting a rather annoying problem (being that apparently nobody else has it...).
All other programs in my start script (gnome-terminal, emacs, xmodmap, etc) are working with no problems whatsoever.
My window manager: sawfish
Command to run xclock in my start script:
Code:
xclock -digital -brief -geometry -0+0
Attached picture:
Top: xclock initialized by start script
Bottom: xclock initialized by terminal
I recently had problems with my HP printer in Fedora 12, where as I never had a problem with it in any other distrubution.... For some reason, the HPLIP driver in the repo doesn't work correctly... I don't know why... but I kept getting errors with "error: Printer queue setup failed. Please restart CUPS and try again."
I tried every suggestion I found... which was installing extra dependencies, disabling firewall, disabling SELinux and a whole bunch of other stuff... but nothing worked... THEN finally I decided to use the HPLIP driver from the HP website... it was a .run file... and I executed it, and my printer has worked perfect eversince..... my question is.... has anybody successfully installed their hp printer from the hplip driver in the repo's..??? I don't know why it didn't work for me, and i've seen other fedora users complain of the same thing? maybe theres something wrong with the package? or its not pulling in a needed dependency? I don't know...
What it does is, if you do something to change anything on the screen, for example, highlighting text, or switching from one tab/menu in an application to another. The screen doesn't show the change. The only way to SEE the change is to do something else to the screen, like grabbing and moving the application around, or scrolling the page of a website, etc. If you don't do that, you won't see what's really on the screen, but rather what WAS on the screen.
Another example:
*) say you have an application open with 3 tabs: tab1, tab2, and tab3.
*) Switch from tab1 to tab2 and you see no change on the screen.
*) Switch from tab2 to tab3 and you see tab 2 on the screen, NOT tab 3.
*) Switch from tab3 to tab 2 and you see tab3 on the screen, and NOT tab2.
Or, if you're typing in this box to make a post, and you hit ctrl+a to select all, you see no change. If you click in the box to deselect all, then it looks like you've selected all text still. The only way to see what's currently on the screen is to scroll the text box or page just a bit, or, if you're using an application, then you'd have to move it around on the screen a bit.
As i've said, the nVidia drivers are installed and working, as well as compiz, etc.
Code:
[=v=]$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02)
00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B)
[Code]....
Also, i did BOTH the dracut thing, and the extra kernel paramter in the grub.conf. So, nouveau is blacklisted. Oddly enough though, i do NOT have this problem when using the nouveau driver...
Also, fwiw, i think that i should mention that i'm not using the "Desktop Settings > Enable Desktop Effects" method, because i always seem to have problems with getting certain features to work, like the background for the cube skydome, etc. How i do it is that i install a package called compiz-manager, and i have it set to run at session start. This makes all of the compiz features work fine. One thing that i've noticed though, is that on my other workstation, i haven't set that up yet, and it seems that is is NOT having the same issue. While compiz-manager was running, i tried to use the "desktop settings" method, and it crapped out and reverted back to the old school desktop. I then tried it again, and it reloaded compiz, and there is no screen update issues now. So it seems that you have to have both of them running in order to get all of the compiz options to work, and not have the screen refresh issue?
I am using emacs+auctex for latex editing now, I want to change the default viewer for dvi files, since xdvi doesn't render correctly most of my documents; okular works perfectly, though I cannot make it the default viewer I went into the AUCTex manual, and there is a tex-view-program list that should contain the list of viewers, but I cannot find the way to customize that variable.
View 6 Replies View RelatedI've installed fc10 but I got some problem with the audio driver for my Dell Vostro 1700. In particular line input doesn't work correctly neither the built in microphone, neither the line input. Is there a special driver?
View 3 Replies View RelatedDoes anyone have a recommendation for embedding audio files into PDF files? I'd like to use this to provide feedback on student papers. Acrobat full version does this, but I'd like to stay in Ubuntu.
View 3 Replies View RelatedIs it possible to embed cover art in songs by any application in ubuntu? Preferably by banshee media player or any media player which shows cover art.
View 3 Replies View RelatedI'm trying to embed a video on my website, and It keeps asking me if I want to save it, instead of just playing it. How do I embed to play and not pop-up the "save" dialog?
Today I demonstrated a simple SSH dictionary attack for a friend. Lucky for you - I also recorded it. (I've made my pw ridiculous and re-secured the box so don't even try it now lol - it'll take 100's of years to crack brute-force).
Anyways, here's what you'll need:<ol><li><a href="http://nmap.org/" target="_blank">NMap</a></li>
<li><a href="http://www.foofus.net/~jmk/medusa/medusa.html"
[Code]....
That's what I have. It shows the box where the video should be - but doesn't play it, just asks to save. Not sure if it's something with my browser plugins... or my code on my page... ? Tried with FireFox and Rekonq - same results. Tried with many different embed codes as well - all same results.
I downloaded grails [URL]... and installed it. Created a sample application hello world. It was running successfully. In browser [URL].. I was able to see grails running. Now comes the problem. To be able to always start the grails application running after boot I wrote a script in /etc/init.d/software_grails its contents are
[code]...
I have to open command prompt and go to /root/helloworld and then execute grails run-app. you dont have to write the name of application to run it. logging of boot messages is enabled /etc/default/bootlogd BOOTLOGD_ENABLE=Yes. then I opened /var/log/boot.
[code]...
But it does not work. If I am not wrong then above method will work ONLY WHEN some one Logs in not on boot time. Is there a way where I can embed grails in apache2 they [URL]... have not mentioned any thing about apache2 to deploy my applications.
I am trying to embed expect in my bash script to perform some tasks
USER="username"
PASS="password"
NAMES=`cat full_list`
for i in $NAMES
do
echo $i
[Code]....
The script initially reads a files containing a list of rpm's on each line and then spawns the rpm2ipc command which uploads the particular rpm to a repository. During this process it tries to enter the credentials, where it is failing.