Software :: Cross Compiler For Power PC On Ubuntu
Sep 21, 2010
I am preparing build chain for cross compiling Power PC platform on Ububtu. I was successfully compiled glibc-2.11 and binutils-2.20. But while compiling gcc_4.5.1 I stopped at following compilation error:
compilation terminated.
make[4]: *** [decContext.o] Error 1
make[4]: *** Waiting for unfinished jobs....
../../../../gcc-4.5.1/libgcc/../libdecnumber/decExcept.c:25:18: fatal error: fenv.h: No such file or directory
compilation terminated.
../../../../gcc-4.5.1/libgcc/../libdecnumber/decNumber.c:175:53: fatal error: stdlib.h: No such file or directory
compilation terminated .....
View 1 Replies
ADVERTISEMENT
Mar 28, 2010
I am trying to build a gcc 4.4.3 cross-compiler. I downloaded the gcc 4.4.3 release, uncompressed it, made a new directory called gccbuild and cd'd there. I have already installed gmp, mpfr, and mpc in /usr/local. These are the commands I used:
Code:
configure --target=arm-linux --enable-languages=c --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local
make
However, the build fails with
Code:
checking for arm-linux-gcc... /home/steven/gccbuild/./gcc/xgcc -B/home/steven/gccbuild/./gcc/ -B/usr/local/arm-linux/bin/ -B/usr/local/arm-linux/lib/ -isystem /usr/local/arm-linux/include -isystem /usr/local/arm-linux/sys-include
checking for suffix of object files... configure: error: in `/home/steven/gccbuild/arm-linux/libgcc':
configure: error: cannot compute suffix of object files: cannot compile .....
View 2 Replies
View Related
Jan 2, 2010
I am just learning to write programs in C++, and i got an iPod Touch for christmas. I have jailbroken my iPod so i can run my own programs on it. If i ever get them compiled. After a few hours of searching i have been unable to come up with a working toolchain for ubuntu which compiles for ipod/iphone. Does anyone know where i can get one/find a howto which will help me to get a toolchain working?
View 4 Replies
View Related
Aug 11, 2010
I am using a arm compiler to build my program but getting following compiler error at the end -
init.c.text+0x2c): undefined reference to '__libc_csu_fini'
init.c.text+0x34): undefined reference to '__libc_csu_init'
View 1 Replies
View Related
Apr 8, 2010
While installing the gcc cross compiler in fedora using the following commands
# cd /etc/yum.repos.d/
# wget [URL]
# yum install armv5tel-redhat-linux-gnueabi-gcc
I got a error:
# cd yum.repos.d
[root@sparc yum.repos.d]# wget [URL]
Resolving fedora-arm.wantstofly.org... failed: Temporary failure in name resolution.
[root@sparc yum.repos.d]#
View 1 Replies
View Related
Feb 3, 2010
I have a large existing codebase that all compiles under Ubuntu 8.04 with g++ using Scons. I've been given the task of getting it to compile for Arm9 running uclinux. I have a arm-elf-g++ compiler that I need to use instead of the gcc version. I ended up borking my /usr/lib/scons/SCons/Tool/g++.py file to use arm-elf-g++ instead of g++, but I know that this is not correct, as I have to go edit that file every time I change compilers.
These are the 2 lines I switch out:
Code:
compilers = ['arm-elf-g++']
#compilers = ['g++']
I simply can not find anywhere in the scons documentation that indicates how to tell it to use a different compiler. It seems that it would go under "Environment" but beyond that I'm lost. The CPPPATH variable seems like it only tells scons where to find #include files. I suppose I could rename arm-elf-g++ to g++ and just set my path to find that one first, but that seems like a bit of a hack as well. It would also break other things on my machine.
View 3 Replies
View Related
Nov 27, 2010
first of all, i will be glad if i can get prebuild toolchain for target=arm1176jzf-s on host= sparc-sun-solaris2.10. ( i hav browsed but can't find prebuild one) so, i tried to establish by myself i hav established binutils first, but while trying to configure& build gcc(gcc4.4.0) , i was interrupted with following error.. error message: this error has come while building boot strap gcc for cross complier tools chain
checking build system type... sparc-sun-solaris2.10
checking host system type... arm-unknown-linux-gnu
checking target system
[code].....
View 3 Replies
View Related
Sep 23, 2010
I have downloaded the source for an embedded Linux system but no tool chain. I want/need a tool chain to rebuild the system image. Can anyone point me to a 'How to' for building the environment? It is an ARM9 system.
View 4 Replies
View Related
Sep 7, 2010
I need to generate 64-bit executable(utility) using PowerPC-linux cross compiler? i.e. Any options need to pass ppc-gcc other then "-m64". I have written a small test program on 64-bit server and generated 64-bit executable using gcc alone.
Ex:
#
file a.out
a.out: ELF 64-bit LSB executable, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), for GNU/Linux 2.6.9, not stripped
#
Actually I want to generate a executable(using PowerPC-linux cross compiler),which will run on 64-bit machines. In my Makefile I am trying to use CC = XXXXX/powerpc-linux/bin/powerpc-linux-gcc -m64 to ppc-linux-gcc,but giving error.
error: -m64 not supported in this configuration
If I remove -m64 its generating 32-bit executable.
View 5 Replies
View Related
Apr 24, 2011
My Linux: Fedora 14 x64
My gcc: 4.5.1
My Glibc: 2.12.90
target Linux: "Ubuntu 8.04.4 LTS" hardy
target kernel: 2.6.24-29-server x64
target gcc: 4.2.4 target Glibc: 2.7
I need gcc/g++ and fortran. I Googled and most documents I found are somehow outdated and targeting for ARM, not for other Linux.
View 8 Replies
View Related
Aug 2, 2010
I am trying to build a cross GCC compiler for PPC476. I applied all the relevant patches. Cross compiler build was successful. When I try to compile the source code using the cross compiler I am getting the below error message. I think this is something related to linker.
Code:
cow_shim_funcs_startup_shutdown.o cow_shim_utils.o ../../dm/cfg/cfgi.a ../../dm/pl2/libsas21xxpl.a ../../raid/pfk/libpfk.a
/home/Raghu/gcc/cross-compiler/ppc/tools/lib/gcc/powerpc-unknown-linux-gnu/4.3.1/../../../../powerpc-unknown-linux-gnu/lib/libgcc_s.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make: *** [app.out] Error 1
View 3 Replies
View Related
Jan 15, 2011
I have searched google for a couple of days, and I keep hearing about an INode limit on filesystems, but that doesn't seem to be the case.
Now whenever I try to download something, watch a ..... video, or listen to Pandora radio, it just stops playing after 2 seconds. Downloading says "No space left on device".I also get the error as root.I do have 5% and more free of HDD space. After reading the similar posts I checked all of this, so if I am overlooking something on the forum, I apologize for an extra post about.
View 3 Replies
View Related
Mar 2, 2011
We want to use GCC for cross compiling C source code for POWERPC MPC8260 target. How do we build cross compiler in windows?
View 3 Replies
View Related
May 2, 2011
I try to cross compile httpd for power pc.It seems that configure doesn't detect cross compilation. The first error was that sizeof (void*) is less than (long), so I have commented out that check (I think it is a hard work around). I've got another error ./dftables: cannoct execute binary file. Why it tries to execute binary for ppc on x86 machine?This is my build script.
#!/bin/sh
NAME=httpd-2.2.17
PWD=$(pwd)
[code]....
View 2 Replies
View Related
Apr 28, 2011
I am trying to install NachOS on fedora, i make a nachos directory and download the nachos source code and cross compiler, then i extract the zip files and patch the make files and everything is okay till now. but when it comes to compiling nachos, i followed these steps.
* ~/nachos> cd NachOS-4.0
* ~/nachos/NachOS-4.0> cd code/build.linux
* ~/nachos/NachOS-4.0/code/build.linux> make depend
[code]....
View 10 Replies
View Related
Jan 30, 2010
I'm trying to cross-compile "sudo" source for Power-PC platform using Montavista tool chain. I'm getting the following error message during configuration: checking host system type... Invalid configuration `ppc_82xx': machine `ppc_82xx' not recognized It is clear that it has found the cross-compiler and configure knows that we are cross-compiling but it fails to recognize the machine. The complete dump follows:
[vhn@localhost sudo-1.7.2p2]$ ./configure --host=ppc_82xx
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
configure: Configuring Sudo version 1.7.2p2
checking whether to lecture users the first time they run sudo... yes
checking whether sudo should log via syslog or to a file by default... syslog
[Code]...
View 3 Replies
View Related
Dec 14, 2010
So for those of you who has built GCC from source would know that you can't install GCC without an existing GCC. So my question is, what would happen if all computers in the world suddenly just died, and all you had was the computer in front of you, and a copy of GCC 4.5. How would you install that?
I ask because I would like to install GCC 4.5 on my old powerbook G4 mac without installing a binary GCC provided by Tiger 10.4 disks. I would like to build GCC from source, without an existing GCC to complicate updating.
View 6 Replies
View Related
Jun 21, 2010
I am using Ubuntu 10.04 64-bit and I purchased a new ALFA AWUS036H wireless card. I would like to know if this "1Watt" wireless card is configured for full power. iwlist wlan0 txpower results:
wlan0 unknown transmit-power information. Current Tx-Power=27 dBm (501 mW). It appears to me that I should be able to increase the power. "iwpriv wlan0 highpower 1" does not work. Do I need to patch the new default driver that comes with Ubuntu 10.04 64-bit with the aircrack one following these directions:[URL]...? Monitor mode and a injection tests seem to work fine with the driver I have installed.
View 2 Replies
View Related
Jun 4, 2010
I use Squeeze with Xfce. My problem is that recently (after the xfce updates) the xfce power manager doesnt react to the power button - it is set to suspend. I dont have gnome-power manager or anything like it running.
If i reboot the computer, the power button will work but if i suspend and resume, it doesnt work again.
The computer is built on an Asus M3N78-VM mobo (2GB RAM/Athlon3200+ single core).
acpi_listen detects the button press.
Any thoughts?
View 2 Replies
View Related
Apr 4, 2011
I'm looking for any power monitoring devices for Linux to allow monitoring power quality, voltage changes, and outages. This would be for North American three phase power system. I want to have this data fed live to my own program. It should be something much better than just jury-rigging a circuit to fee the power waveform into 2 or 3 audio cards.
View 10 Replies
View Related
May 28, 2010
On the last release, I had this app installed where I could pick my power profile. I could use power conservatively, and performance would suffer a bit, but longer batt life,or I could have it automatically detect, or I could have the apps use all the power they want and then some. I'm looking to reinstall that app. What was the name of it?I can't remember, and so far, can't find.
View 2 Replies
View Related
Oct 30, 2010
I had unplugged my PC last night as sometimes there's storms at night this morning I plugged in PC and the power light is blinking and the PC wont come on at all tried different power cord, same result
PC is a AMD athlon64 3300+ 2.4ghz SiS graphics
probably the power-supply or what?
If it is the power supply, how do I find new one as I've never had to replace anything on it or any other PC?
Also, I really need access to the hard drive but it's a weird hard drive and was wondering if I could put that hard drive in my K7 PC, which already has 2 drives in it can a pc have 3 drives? do I have to add/have another ribbon cable for 3rd drive?
View 4 Replies
View Related
Oct 15, 2010
After much research, I have found the solution to my intermittent wireless problem!Whenever the laptop is plugged into power, wireless is perfect, when I'm on battery, wireless is horrible.Here is the fix:
Code:
sudo iwconfig eth1 power off
Unfortunately, I have to type this in everytime I unplug the laptop.
[code]....
View 3 Replies
View Related
Jun 18, 2010
My problem arises two days ago. Power button of my keyboard has stopped working,why?It works well when I use windows.
View 2 Replies
View Related
Sep 20, 2010
I am trying to cross compile a package from source for an embedded arm board, however I am not having much luck creating an arm binary.
After running make, this is what I get:
View 3 Replies
View Related
Mar 21, 2010
Im looking for a program that will sync my sticky nes between my mac and my ubuntu netbook.
View 4 Replies
View Related
Jul 5, 2010
I am trying to get openswan installed on cygwin. Having issues with that, their mailing list has suggested to cross compile it from linux, and I've had some gcc related errors. So I was wondering what I can use that will install on ubuntu to compile this for cygwin. As am I supposed to run this configure on the gcc package? [URL]
View 1 Replies
View Related
Dec 21, 2010
How can connect two PCs that both of them have ubuntu by cross cable?
View 4 Replies
View Related
Jan 10, 2010
I've got a Laptop with wireless broadband connection which needs to be connected to a desktop machine so that the internet connection could be shared. Both has got Ubuntu 9.1. I don't have a router or a switch. I just need direct connection with a cross over cable.
View 5 Replies
View Related
Apr 22, 2010
I recently discovered TeamViewer, a free windows application to let me remote control between 2 windows installs, and most importantly, FILE transfer easily between the two. I'm trying to find a similar solution for ubuntu, so if need be, I can xfer between windows and ubuntu. I have done cross-OS remote desktoping previously, using tightVNC on windows to control Ubuntu and it worked pretty well, but I could not do file transfers, and that is what my major premise is.
viable solutions that will allow me to do Ubuntu-->Ubuntu and Windows<--> Ubuntu Transfers? I should explain that I have a dual boot of Win 7/Ubuntu Karmic on Laptop, and Win XP/Karmic on Desktop.
View 9 Replies
View Related
