Networking :: Connect Two Pc By Cross Cable In Ubuntu?
Dec 21, 2010How can connect two PCs that both of them have ubuntu by cross cable?
View 4 Replies
ADVERTISEMENT
Networking :: How To Connect Two Laptops With Cross Cable In Fedora 9
May 3, 2010I have two laptops running fedora 9 (32-bit and 64-bit on each system) and I want to connect them together for sharing files. For this I have a cross cable i.e.,a simple cable that is usually used to connect a PC with ADSL modem.
View 4 Replies View RelatedGeneral :: Connect Redhat To Window Xp By Cross Over Cable?
Sep 18, 2010I have two desktop one have rhel 5 and other window xp i am trying to connect both with cross over cable.IP for windows system is 192.168.0.1 IP for linux system is 192.168.0.2 I am able to ping my linux system from windows but unable to ping windows system from linux.
View 4 Replies View RelatedUbuntu Networking :: Direct Connection With A Cross Over Cable?
Jan 10, 2010I've got a Laptop with wireless broadband connection which needs to be connected to a desktop machine so that the internet connection could be shared. Both has got Ubuntu 9.1. I don't have a router or a switch. I just need direct connection with a cross over cable.
View 5 Replies View RelatedNetworking :: File Transfer Using Ethernet Cross Over Cable?
Apr 18, 2010I am running Ubuntu Linux 9.10 on my laptop and desktop. I would like to transfer files from one to the other using an Ethernet Cross Over Cable. Is there software already installed in the bundle, that would allow me to setup network drives for each machine when the cable is connected. Also how would I setup the configuration.
View 10 Replies View RelatedGeneral :: Connecting Two Pcs Via Cross Cable?
May 5, 2011I want connect my two Linux PCs running in 2.6 kernel via cross over cable. To do this I have done the following settings after a Google search:
In PC1
ifconfig eth0 10.10.11.16 netmask 255.255.255.0 up route add default gw 10.10.11.13 eth0 (default gateway which is ip of pc2 )
In PC2
ifconfig eth0 10.10.11.13 netmask 255.255.255.0 up route add default gw 10.10.11.16 eth0 (default gateway which is ip of pc1 )
Then i tried pinging i could not able to connect.Are these above settings enough or any thing am i missing?
For your more information
In PC1
ifconfig output
eth0 Link encap:Ethernet HWaddr 00:16:76:A1:33:37
inet addr:10.10.11.16 Bcast:10.10.11.255 Mask:255.255.255.0
inet6 addr: fe80::216:76ff:fea1:3337/64 Scope:Link
[Code].....
General :: System Not Connected With LAN By Cross Over Cable / Fix It?
Dec 1, 2010I have linux system which receive data from other system having linux OS in that also. but i cannot send data on other system.
View 2 Replies View RelatedSlackware :: Share Internet Via Cross Cable?
Jul 5, 2011i have 2 laptop first one run fedora14 and Second run slackware 13.37 can i share internet via cross Cable?
View 8 Replies View RelatedUbuntu Networking :: Cable Modem Networking - Can't Connect To Each Other On The Home Network
Feb 14, 2010I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedUbuntu Networking :: Cannot Connect To Internet With Cable
May 1, 2010I'm having trouble connecting to the internet... I'm using Ubuntu 10.04 on a PC with Windows XP installed. When I click the little network icon at the top there's an option called "auto eth1" but when I click it, it just says
"Wired Connection: Disconnected - you are now offline."
Networking :: Connect The Cross Over NIC Thes Rest Of The Network Can't See The Server?
Mar 18, 2010I have a server with 4 NICs in it. for HA and speed I have bonded 3 of them together (eth0-eth2) in my wonderful unmanaged 10/100 switch. 192.168.1.3. eth3 is cross connected via the patch panel to another system so that file transfers can be a 1000/FULL. I have created a 172.1.1.0 network between the 2 hosts. Problem is that once i connect the cross over NIC thes rest of the network cant see the server. I am sure it is a routing problem and added ip route add 172.1.1.0/24 dev eth3 172.1.1.0/24 dev eth3 proto kernel scope link src 172.1.1.0 192.168.1.2/24 dev bond0 proto kernel scope link src 192.168.1.2 169.254.0.0/16 dev eth3 scope link metric 1005 169.254.0.0/16 dev bond0 scope link metric 1006 default via 192.168.1.2 dev bond0
View 3 Replies View RelatedUbuntu Networking :: 10.4 - Connect To The Internet Via An Ethernet Cable
Jul 13, 2011I am using Ubuntu Server version 10.4, and am trying to connect to the internet via an ethernet cable. This may and probably is incredibly simple, however, I could not find anything that pertains to it.
View 9 Replies View RelatedUbuntu Networking :: Ethernet Cable Modem Can't Connect To Internet
May 4, 2011I am using a cable modem wired to my PC via ethernet. My ISP is Road Runner, through Time Warner Cable.
I entered my IP address, Netmask, and DNS Servers into the network, not using DHCP. This was how I was able to achieve a network connection.
I am connected to the modem, but I cannot get internet.
Here are my stats:
Networking :: Unable To Connect Two Ubuntu Computers Via Crossover Cable / Sort It?
May 31, 2010I tried to connect two ubuntu computers via crossover network. But sometimes they can connect and see each other and even ping each other and sometimes not!
Each time, each of my PC's can ping it's own IP address but may not ping the other PC. I tried to disconnect cable, reconnect, disable network, enable it again, change IP address, disconnect via Network Manager Applet, reconnect and... . But when one of them don't want to connect I can't do this anyway!
Anyone knows what must be the problem? Sometimes it took about many seconds to get them connected, and sometimes they can't connect for many hours.
I must add that I have an ADSL modem on one of two Ubuntu PCs that connect via another cable.
Ubuntu Networking :: Possible To Connect Desktop To Internet / By Connecting It To Laptop With Cable?
Jan 11, 2011I have an old desktop computer that I installed Ubuntu 10.04 on. I also have a laptop with Windows 7 Pro which is connected wirelessly to the internet. The desktop does not have a wireless card and the modem is in another room. I have a spare ethernet cable, is it possible to connect the Ubuntu desktop to the internet by connecting it to the laptop with the cable? I'm not very good with computers.If this isn't possible, how would I go about connecting the desktop to the internet?
View 1 Replies View RelatedUbuntu Networking :: NetworkManager Won't Connect Wired Direct To Cable Modem
Jul 9, 2011I cannot connect my Dell Inspiron 1300 through the NetworkManager "wired" connection, when I try to go direct to the cable modem. It fails to connect.
If I connect the cable modem to my (linksys WRT54GS) wireless router, and then connect my laptop to a wired port in the router, it connects in seconds, successfully.
This has happened to me 2 other times, when I tried to connect my laptop to a client's cable modem, because my client did not have a wireless router available, in their home.
My wireless works fine. This has me perplexed. I'm using Ubuntu 10.04 LTS and NetworkManager Applet 0.8
I've tried some things to see what is going on, such as "ifconfig" "dhclient" as well as modifying the "Auto eth0" parameters and adding my laptop's MAC address, etc. Results were no fix or solution. I feel like I'm headed down the wrong road. Would someone set me straight? I have a feeling this is simpler than I think.
Do I have to actually reset my own or someone's cable modem to get this to work? I don't want to do that unless there's no other way. Is there? Let me know what commands I can or should run.
Ubuntu Networking :: Auto Eht0 Doesn't Work - Can't Connect With Ethernet Cable?
Nov 13, 2010I've recently bought a recycled computer for my office. The plan was to get an old cheap computer and use it to write LaTex documents but nothing else. However, I can't seem to get the thing to connect to the internet. I'm on a University network which has a funny setup but I don't think that's the problem.So here's the deal. I have tried this with 9.04, 10.04 and 10.10 and it hasn't worked. The computer recognizes the ethernet cable. If I issue the command "sudo mii-tool eth0" and get back "eth0: negotiated 100baseTx-FD, link ok". However, click on the networking logo on the top right, and click auto eth0, it tries to connect for about 30 seconds, then gives up. Unfortunately I'm pretty clueless when it comes to networking so I have no idea what to do to try to fix this.
View 8 Replies View RelatedNetworking :: Connect Nokia E51's Modem - Via. Data Cable - To Access GPRS
Jan 17, 2010I have fedora 12 installed in my laptop. Can anyone plz tell me how to connect nokia E51's modem ( via. Data Cable) to access GPRS !
View 2 Replies View RelatedNetworking :: Connect Nokia Seimens C2110 ADSL Modem Through USB Cable In Fedora 11
Sep 19, 2009My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies View RelatedNetworking :: Can Cat5e Cable Tester Be Used For Cat 6 Cable
Apr 7, 2010Can Cat5e RJ45 connector crimper be used for Cat 6 connector because I heard cat 6 connector is different from cat 5e connector and also same question for cable tester can cat5e cable tester be used for cat 6 cable?
View 1 Replies View RelatedUbuntu :: Can't Connect To Internet Server Through Cable / Resolve This?
Sep 10, 2010I have recently downloaded and installed ubuntu 10.4, and I am finding it impossible to connect to the Internet.
I connect to the Internet through an Ethernet cable. My university (Tuebingen, Germany) provides the Internet through this server:
http://10.196.128.11/upload/custom/green/welcome.html (English link).
When I open my browser in windows vista (I have a duel-boot system), my browser (Firefox) automatically goes to this page, and I log in, and am able to then use the Internet.
Ubuntu also searches for this 10.196.128.11 server, but it continually states "waiting for server to respond". I have checked all the settings I could find in windows and compared them to the ones in ubuntu, and they seem to be identical to me. I am using firefox in ubuntu too so I cannot understand the problem.
Ubuntu :: Connect Xbox 360 To Laptop Via HDMI Cable?
Sep 21, 2010I'm trying to connect my Xbox 360 to my Laptop via HDMI cable, so that I can use Xbox ony my laptop's screen.
I connected my Latop to my Xbox 360 by HDMI cable, but nothing happens, I was expecting the screen to auto-switch or something, so I went to the monitors GUI and tried to find settings there - unsuccessfuly.
Ubuntu :: Disconnect Internet Cable From PC And Connect To Laptop?
Mar 14, 2010Recently installed Ubuntu 9.10 on laptop - new partition. Have PC running XP with internet connection. I have a satellite connect from Germany. I live in Turkmenistan.I know all IP addresses, subnet mask, Default gateway, etc. Can someone help configure internet on laptop w/Ubuntu? I am not the fastest ball down the alley but I shouldn't have too much problem with the terminal. Just be gentle. I just completed a pppoeconf search and was informed something or another couldn't be found. It's a little frustrating because I need to disconnect internet cable from PC and connect to Laptop. let me add that I do not have an internet user name or password "supplied by ISP". But I hooked up connection OK on XP.
View 2 Replies View RelatedUbuntu :: Connecting A USB FTDI TTL-232 Cable - Refuses To Connect Properly
Jan 25, 2011I am trying to connect this cable
[url]
However, it refuses to connect properly. It previously connected, but now whenever I plug it in, nothing happens.
lsusb before:
Code:
lsusb after:
Code:
dmesg error:
Code:
From some other googling, is seemed as if removing "ehci_hcd" or "uhci_hcd" would fix it, however running the following commands does nothing, as shown below:
Code:
CentOS 5 Hardware :: Connect Pc To Pc With Ethernet Cable?
Jan 6, 2011i have two PC (one laptop and other desktop) how to connect both with lan cable?
View 1 Replies View RelatedHardware :: Connect Digital Camera Via Firewire Cable?
Jun 13, 2009I have sony handycam DCR-HC30E camera. I am interested in connecting it to my Gentoo computer via firewire cable. I`ve connected camera to computer with Firewire cable and turned camera on in VCR mode. What do I need to do for identification camera in linux?
View 3 Replies View RelatedGeneral :: Acer Aspire Network - Cable Won't Connect
Feb 1, 2011My laptop connects fine wirelessly but when I try connecting with the cable it won't connect. I have tried an identical laptop and that connects fine so it must be the laptop but I don't know why.
View 15 Replies View RelatedOpenSUSE Network :: Connect To The EDGE/GPRS Using USB Cable KDE 4.6 And KNetworkManager
Jul 29, 2011I am using Nokia x2-00 phone. I am able to connect to the EDGE/GPRS using Blueman. However, if I use the USB cable along with KNetworkManager with the same dialing number and APN I am unable to connect. What might be the cause?
View 2 Replies View RelatedUbuntu / Apple :: EMac And IMac File Sharing With Ethernet Cable And Other Cable?
Oct 12, 2010how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
OpenSUSE Network :: Able To Connect To Networks (both With An Ethernet Cable And Wireless) Don't Have Internet Access?
Mar 2, 2011Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
View 3 Replies View Related