I try to cross compile httpd for power pc.It seems that configure doesn't detect cross compilation. The first error was that sizeof (void*) is less than (long), so I have commented out that check (I think it is a hard work around). I've got another error ./dftables: cannoct execute binary file. Why it tries to execute binary for ppc on x86 machine?This is my build script.
#!/bin/sh
NAME=httpd-2.2.17
PWD=$(pwd)
[code]....
I'm trying to cross-compile "sudo" source for Power-PC platform using Montavista tool chain. I'm getting the following error message during configuration: checking host system type... Invalid configuration `ppc_82xx': machine `ppc_82xx' not recognized It is clear that it has found the cross-compiler and configure knows that we are cross-compiling but it fails to recognize the machine. The complete dump follows:
[vhn@localhost sudo-1.7.2p2]$ ./configure --host=ppc_82xx
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
configure: Configuring Sudo version 1.7.2p2
checking whether to lecture users the first time they run sudo... yes
checking whether sudo should log via syslog or to a file by default... syslog
[Code]...
I am trying to build cross-toolchain for arm. I dont want ready-to-use solution. I want my own . I want to build toolchain manually, but I cannot compile gcc. When I invoke "make" I get the following error:
Code:
-c ../../../../src/gcc-4.4.2/libgcc/../gcc/config/arm/lib1funcs.asm -include _arm_addsubsf3.vis
/home/ecco/Progs/cross-compilers/build/arm-linux/build/build-gcc/./gcc/xgcc -B/home/ecco/Progs/cross-compilers/build/arm-linux/build/build-gcc/./gcc/ -B/home/ecco/Progs
[code]....
Then, I try to build gcc:
Code:
../../src/gcc-4.4.2/configure --target=arm-linux --enable-languages=c -- prefix=/home/ecco/Progs/cross-compilers/result/arm-linux --with-headers=../../src/kernel_headers_2.6.33.4/include/
Make fails...my arm-linux-gcc is actually can be built. When I do the following:
Code:
make all-gcc
make install
I get my arm-linux-gcc in ~/Progs/cross-compilers/result/arm-linux. So I can compile kernel , but I want user-space , so I do:
Code:
make all-target-libgcc
Make fails when it tries to build libgcc (AFAIK I need libgcc to build glibc). But why does it fails? I have header files like "stdio.h" on my gentoo box. Maybe compiler somehow wants files like "stdio.h" for my TARGET (arm-linux)? But AFAIK these are files are Standart C Library header files, and glibc did not even compiled yet, so I dont have these headers for my TARGET...
I found description of this error here:[URL](gcc part). But when I add additional flags -Dinhibit_libc -D__gthr_posix_h, then make fails when it tries to compile ../gcc-4.4.2/gcc/crtstuff.c with the same errors.
I am trying to nuild executables to run on Windoze under Fedora 12. I have install all of the mingw32 RPMs. Now I just need a URL that discribes how to compile. I am using autoconf and automake. I have done it before but that was installing from Mingw32 source.
View 2 Replies View Relatedi have fedora 11(64 bit).i want to do the cross compilation for 32 bit arm processor.i install all required thing but any of the make command(make,make mrproper,defconfig) is not working.
View 8 Replies View RelatedI want to cross compile gtk program from linux to arm. I am using ubuntu10.04. How can I cross compile it for arm. I have tried this but this is my output:
root@habesh-laptop:~/habesh/gtk# /root/CodeSourcery/Sourcery_G++_Lite/bin/arm-none-linux-gnueabi-gcc -o trail1 base1.c 'pkg-config --cflags --libs gtk+-2.0'
cc1: warning: include location "/usr/include/gtk-2.0" is unsafe for cross-compilation
cc1: warning: include location "/usr/include/atk-1.0" is unsafe for cross-compilation
cc1: warning: include location "/usr/include/cairo" is unsafe for cross-compilation .....
We want to use GCC for cross compiling C source code for POWERPC MPC8260 target. How do we build cross compiler in windows?
View 3 Replies View RelatedI am preparing build chain for cross compiling Power PC platform on Ububtu. I was successfully compiled glibc-2.11 and binutils-2.20. But while compiling gcc_4.5.1 I stopped at following compilation error:
compilation terminated.
make[4]: *** [decContext.o] Error 1
make[4]: *** Waiting for unfinished jobs....
../../../../gcc-4.5.1/libgcc/../libdecnumber/decExcept.c:25:18: fatal error: fenv.h: No such file or directory
compilation terminated.
../../../../gcc-4.5.1/libgcc/../libdecnumber/decNumber.c:175:53: fatal error: stdlib.h: No such file or directory
compilation terminated .....
I am trying to get openswan installed on cygwin. Having issues with that, their mailing list has suggested to cross compile it from linux, and I've had some gcc related errors. So I was wondering what I can use that will install on ubuntu to compile this for cygwin. As am I supposed to run this configure on the gcc package? [URL]
View 1 Replies View Relatedhow to cross compile the perl script for arm_v5t.le.gcc??downloaded perl script unable to compile from the cross folder as per the readme.txt instruction
View 1 Replies View Relatedhow to cross compile Mplayer into ARM target board , my target board details are URL...and i have successfully compiled Mplayer in intel pc.
View 2 Replies View RelatedI need to cross-compile some libs for using in a ARM11 board running Linux (at this time, 2.6.28, but I'll try update it... and for costs reason, maybe it turns on a ARM9 board). The libs are libfprint, libusb-1.0 (that is a requirement of libfprint), libSDL (and some of its extensions) and maybe libsqlite3. How I can make this, with the development files in the host machine (an Ubuntu 10.04 32bits machine) and the runtime files at the host ARM11 Board.
View 6 Replies View RelatedI have Slackware 13-64 bit and I would like to cross-compile some Fortran and C programs to windows 32 and 64 bit applications. The Linux versions utilize X11 for the graphical users interface. I have tried MINWG but I could not get it to work, either in pre-built binary or source code form. Is there a binary version that works on Slackware 13? Alternatively, is there another method available?
View 1 Replies View RelatedI want to compile a program with the source I already have but I have to add an option. When I run the command ./autogen.sh the terminal returns aclocal not found. Is it a package or something i have to install?
View 6 Replies View RelatedI'm trying to cross-compile glib-2.24.0 for Linux running on a Freescale PPC CPU and running into one problem after another. My host is running Fedora 13, and there I can compile the same source for the host machine with no problems. For the cross compilation, I'm currently using LTIB (provided already configured from Freescale for my board/CPU).
View 3 Replies View RelatedI'm trying to cross compile wvdial to ARM, wvdial needs wvstreams and wvstreams need openssl and zlib. I've managed to cross compile openssl 1.0.0d;
View 3 Replies View RelatedI wanted to compile a program for my openwrt router from source i already have but to add an option. I ran ./autogen.sh in the terminal but it returned aclocal not found.
View 5 Replies View RelatedI'm trying to cross compile the GNU make for Alpha Architecture on my i686 PC and the GNU make i compiled would be placed in my virtual hard disk which is a Alpha based linux simulated system. My question is now , I'm able to cross compile the GNU make on my i686 real PC machine , but when i let the make program run in my virtual machine , it pops out the error ..
make: /lib/libc.so.6.1: version `GLIBC_2.4' not found (required by make)
After that, I try another alternative , and I read through the file "INSTALL" on the GNU make directory that I downloaded from the internet . In this case , I downloaded make-3.81. On the sub section "Compiling For Multiple Architectures" It says that
"You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run the `configure' script.`configure' automatically checks for the
source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not support the `VPATH'
variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the
package for one architecture, use `make distclean' before reconfiguring for another architecture." And I do not understand the line "by placing the object files for each architecture in their own directory" . What object files that I should put ?
First, I'm trying to cross compile mono 2.6.4 so that it will run on Freescale Embedded Linux for a PowerPC CPU. My host machine is running Fedora 13 on an x86. Freescale provides a copy of the Linux Target Image Builder (LTIB) that has been pre-configured for the particular board I'm using, and LTIB seems to be able to help with the cross compilation of other stuff--you can add in your own packages to be built and included in your newly-built Linux image.
Mono depends on pkg-config and glib-2, so I have selected them in the LTIB package selection config. I've also added a new package for mono that builds mono-2.6.4 from the source tar (after the other deps have also been built).
I'm having a problem getting the glib-2.24.0 package libraries created. Basically they appear to build and link ok, but then libtool runs and errors out claiming it has a syntax error! (numerous wths followed...)
Here is LTIB's temporary build script for only the glib2 package:
Code:
Here is the output when building the glib2 package (configure + make):
Code:
Build path taken because: directory build, build key set, no prebuilt rpm,
I am trying to cross compile the "libtorrent-rasterbar-0.14.8" i got the error
Code:
checking for boostlib >= 1.35... yes
checking whether the Boost::System library is available... yes
[code]....
I'm trying to compile a newer version of devicekit-power (currently I have 009) so maybe I can suspend/hibernate my laptop again, after I updated the kernel. I installed every package "./configure" asked, so it made a Makefile. When I use "make", it builds a few files, then I get this error:
[code]...
Also, is upower-0.90/91 the same thing but newer?
I am trying to cross compile php for "arm" target using "arm-angstrom-linux-gnueabi" tool chain. Apache compilation was successful after using a few ac_cv configuration options(and a few others to get rid of compile errors). But was unable to compile php for the target, as the 'apxs' file used was not executable in the build machine.
I tried creating an apxs file for the build machine architecture(intel 686), and using it. It was able to compile then, but still php page is not getting displayed on the web server. (Have done the procedures like, loading the libphp5 module on httpd conffile and all)
I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
View 1 Replies View RelatedI'm new to Apache configuration so could be misunderstanding but shouldn't the characters highlighted in red below be removed?
Code:
accidentally I do something wrong with my server and the httpd folder missing and I need it to setup my mail server and anyone can help me what can I do without reinstalling my Cent OS? Here is the error msg :
[root@mydomain etc]# service httpd stop
Stopping httpd: [FAILED]
[root@mydomain etc]# service httpd restart
[code]....
We are using this url on our testing box and this ip is reverse proxy IP ( 10.192.64.52)
Without reverse proxy:- URL is working fine.
http://10.192.16.77/akc-qa/arsys/ser...TS000000001430
But with reverse proxy its putting escape [%25] in between %3a
[url]
Is it possible to write a rewrite rule to bypass escape [NE] for this particular URL?
Running CentOS 5 x64 And today my httpd is running very slow and I can't find a fix. Looked all over different forums
When starting httpd I get the message: /var/lock/subsys/httpd': No space left on device I checked that directory above and there is no file called httpd tried rebooting server
Can't do updates too:
[root@u15438957 ~]# yum update
Loaded plugins: fastestmirror, priorities
rpmdb: unable to join the environment
[Code]...
I use Squeeze with Xfce. My problem is that recently (after the xfce updates) the xfce power manager doesnt react to the power button - it is set to suspend. I dont have gnome-power manager or anything like it running.
If i reboot the computer, the power button will work but if i suspend and resume, it doesnt work again.
The computer is built on an Asus M3N78-VM mobo (2GB RAM/Athlon3200+ single core).
acpi_listen detects the button press.
Any thoughts?
I am using Ubuntu 10.04 64-bit and I purchased a new ALFA AWUS036H wireless card. I would like to know if this "1Watt" wireless card is configured for full power. iwlist wlan0 txpower results:
wlan0 unknown transmit-power information. Current Tx-Power=27 dBm (501 mW). It appears to me that I should be able to increase the power. "iwpriv wlan0 highpower 1" does not work. Do I need to patch the new default driver that comes with Ubuntu 10.04 64-bit with the aircrack one following these directions:[URL]...? Monitor mode and a injection tests seem to work fine with the driver I have installed.
I'm looking for any power monitoring devices for Linux to allow monitoring power quality, voltage changes, and outages. This would be for North American three phase power system. I want to have this data fed live to my own program. It should be something much better than just jury-rigging a circuit to fee the power waveform into 2 or 3 audio cards.
View 10 Replies View Related