Programming :: Building PPC476 Enabled GCC Cross Compiler / Tool Chain
Aug 2, 2010
I am trying to build a cross GCC compiler for PPC476. I applied all the relevant patches. Cross compiler build was successful. When I try to compile the source code using the cross compiler I am getting the below error message. I think this is something related to linker.
Code:
cow_shim_funcs_startup_shutdown.o cow_shim_utils.o ../../dm/cfg/cfgi.a ../../dm/pl2/libsas21xxpl.a ../../raid/pfk/libpfk.a
/home/Raghu/gcc/cross-compiler/ppc/tools/lib/gcc/powerpc-unknown-linux-gnu/4.3.1/../../../../powerpc-unknown-linux-gnu/lib/libgcc_s.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make: *** [app.out] Error 1
View 3 Replies
ADVERTISEMENT
Apr 24, 2011
My Linux: Fedora 14 x64
My gcc: 4.5.1
My Glibc: 2.12.90
target Linux: "Ubuntu 8.04.4 LTS" hardy
target kernel: 2.6.24-29-server x64
target gcc: 4.2.4 target Glibc: 2.7
I need gcc/g++ and fortran. I Googled and most documents I found are somehow outdated and targeting for ARM, not for other Linux.
View 8 Replies
View Related
Sep 23, 2010
I have downloaded the source for an embedded Linux system but no tool chain. I want/need a tool chain to rebuild the system image. Can anyone point me to a 'How to' for building the environment? It is an ARM9 system.
View 4 Replies
View Related
Apr 25, 2016
I tried to install the cross toolchain for armhf but, apparently, I borked something. I tried to follow the directions here : [URL] .... but he lost me at "The key fingerprint is: 084C 6C6F 3915 9EDB 6796 9AA8 7DE0 8967 1804 772E (you will need to install curl in a bare chroot)".
I have successfully installed the toolchain according to the gnuarmeclipse method and don't recall any references to "chroot"; it was pretty straight forward. That machine took a dump and I need to start over. I would like to install the toolchain without Eclipse getting in the way (and hogging memory).
View 1 Replies
View Related
Mar 28, 2010
I am trying to build a gcc 4.4.3 cross-compiler. I downloaded the gcc 4.4.3 release, uncompressed it, made a new directory called gccbuild and cd'd there. I have already installed gmp, mpfr, and mpc in /usr/local. These are the commands I used:
Code:
configure --target=arm-linux --enable-languages=c --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local
make
However, the build fails with
Code:
checking for arm-linux-gcc... /home/steven/gccbuild/./gcc/xgcc -B/home/steven/gccbuild/./gcc/ -B/usr/local/arm-linux/bin/ -B/usr/local/arm-linux/lib/ -isystem /usr/local/arm-linux/include -isystem /usr/local/arm-linux/sys-include
checking for suffix of object files... configure: error: in `/home/steven/gccbuild/arm-linux/libgcc':
configure: error: cannot compute suffix of object files: cannot compile .....
View 2 Replies
View Related
Jan 30, 2010
I'm trying to cross-compile "sudo" source for Power-PC platform using Montavista tool chain. I'm getting the following error message during configuration: checking host system type... Invalid configuration `ppc_82xx': machine `ppc_82xx' not recognized It is clear that it has found the cross-compiler and configure knows that we are cross-compiling but it fails to recognize the machine. The complete dump follows:
[vhn@localhost sudo-1.7.2p2]$ ./configure --host=ppc_82xx
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
configure: Configuring Sudo version 1.7.2p2
checking whether to lecture users the first time they run sudo... yes
checking whether sudo should log via syslog or to a file by default... syslog
[Code]...
View 3 Replies
View Related
Apr 28, 2010
I am trying to cross compile php for "arm" target using "arm-angstrom-linux-gnueabi" tool chain. Apache compilation was successful after using a few ac_cv configuration options(and a few others to get rid of compile errors). But was unable to compile php for the target, as the 'apxs' file used was not executable in the build machine.
I tried creating an apxs file for the build machine architecture(intel 686), and using it. It was able to compile then, but still php page is not getting displayed on the web server. (Have done the procedures like, loading the libphp5 module on httpd conffile and all)
View 1 Replies
View Related
Aug 11, 2010
I am using a arm compiler to build my program but getting following compiler error at the end -
init.c.text+0x2c): undefined reference to '__libc_csu_fini'
init.c.text+0x34): undefined reference to '__libc_csu_init'
View 1 Replies
View Related
Feb 3, 2010
I have a large existing codebase that all compiles under Ubuntu 8.04 with g++ using Scons. I've been given the task of getting it to compile for Arm9 running uclinux. I have a arm-elf-g++ compiler that I need to use instead of the gcc version. I ended up borking my /usr/lib/scons/SCons/Tool/g++.py file to use arm-elf-g++ instead of g++, but I know that this is not correct, as I have to go edit that file every time I change compilers.
These are the 2 lines I switch out:
Code:
compilers = ['arm-elf-g++']
#compilers = ['g++']
I simply can not find anywhere in the scons documentation that indicates how to tell it to use a different compiler. It seems that it would go under "Environment" but beyond that I'm lost. The CPPPATH variable seems like it only tells scons where to find #include files. I suppose I could rename arm-elf-g++ to g++ and just set my path to find that one first, but that seems like a bit of a hack as well. It would also break other things on my machine.
View 3 Replies
View Related
Aug 4, 2010
I am trying to install the Tool chain for avr following this link:[URL]
I get an error that I need gmp and other things so I try to install them as pointed out in the same web page lower:
Build GMP for MinGW
* Version 4.2.3
* <http://gmplib.org/>
* Build script:
[Code].....
the point is that I have no idea in which directory to install the gmp.
View 1 Replies
View Related
Mar 27, 2010
I wanted to know how can I cross compile SMS SERVER TOOL for an embedded computer and make just one binary file for it or how can I change all of its default files places like its demon and object file and gather all of them to one directory to execute and use and run.let me explain it better for you : I have an embedded computer with Linux OS that its file system is read only and I can not add any file to /usr /lib and ..... and I can just mount a SD memory card to it and copy all of my programs to it and run them from there as you understand I have two choices to choose, first make one big binary file for each program that I am doing it now and it is not a suitable solution and the second is finding the way to change default place of shared object file of my program.now you tell me what can I do to solving this problem.
View 1 Replies
View Related
Apr 5, 2010
iam having fedora 10 core so w to build toolchain for arm processor or systametic steps for building toolchain of arm processor on fedora 10 core.
View 1 Replies
View Related
Sep 21, 2010
I am preparing build chain for cross compiling Power PC platform on Ububtu. I was successfully compiled glibc-2.11 and binutils-2.20. But while compiling gcc_4.5.1 I stopped at following compilation error:
compilation terminated.
make[4]: *** [decContext.o] Error 1
make[4]: *** Waiting for unfinished jobs....
../../../../gcc-4.5.1/libgcc/../libdecnumber/decExcept.c:25:18: fatal error: fenv.h: No such file or directory
compilation terminated.
../../../../gcc-4.5.1/libgcc/../libdecnumber/decNumber.c:175:53: fatal error: stdlib.h: No such file or directory
compilation terminated .....
View 1 Replies
View Related
Apr 8, 2010
While installing the gcc cross compiler in fedora using the following commands
# cd /etc/yum.repos.d/
# wget [URL]
# yum install armv5tel-redhat-linux-gnueabi-gcc
I got a error:
# cd yum.repos.d
[root@sparc yum.repos.d]# wget [URL]
Resolving fedora-arm.wantstofly.org... failed: Temporary failure in name resolution.
[root@sparc yum.repos.d]#
View 1 Replies
View Related
Jan 2, 2010
I am just learning to write programs in C++, and i got an iPod Touch for christmas. I have jailbroken my iPod so i can run my own programs on it. If i ever get them compiled. After a few hours of searching i have been unable to come up with a working toolchain for ubuntu which compiles for ipod/iphone. Does anyone know where i can get one/find a howto which will help me to get a toolchain working?
View 4 Replies
View Related
Nov 27, 2010
first of all, i will be glad if i can get prebuild toolchain for target=arm1176jzf-s on host= sparc-sun-solaris2.10. ( i hav browsed but can't find prebuild one) so, i tried to establish by myself i hav established binutils first, but while trying to configure& build gcc(gcc4.4.0) , i was interrupted with following error.. error message: this error has come while building boot strap gcc for cross complier tools chain
checking build system type... sparc-sun-solaris2.10
checking host system type... arm-unknown-linux-gnu
checking target system
[code].....
View 3 Replies
View Related
Sep 7, 2010
I need to generate 64-bit executable(utility) using PowerPC-linux cross compiler? i.e. Any options need to pass ppc-gcc other then "-m64". I have written a small test program on 64-bit server and generated 64-bit executable using gcc alone.
Ex:
#
file a.out
a.out: ELF 64-bit LSB executable, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), for GNU/Linux 2.6.9, not stripped
#
Actually I want to generate a executable(using PowerPC-linux cross compiler),which will run on 64-bit machines. In my Makefile I am trying to use CC = XXXXX/powerpc-linux/bin/powerpc-linux-gcc -m64 to ppc-linux-gcc,but giving error.
error: -m64 not supported in this configuration
If I remove -m64 its generating 32-bit executable.
View 5 Replies
View Related
Jan 14, 2010
I am in the process of building some packages with the Intel compiler (icc) and was wondering how to make it the default compiler when using rpmbuild.
View 3 Replies
View Related
Jun 15, 2010
I'm trying to cross-compile glib-2.24.0 for Linux running on a Freescale PPC CPU and running into one problem after another. My host is running Fedora 13, and there I can compile the same source for the host machine with no problems. For the cross compilation, I'm currently using LTIB (provided already configured from Freescale for my board/CPU).
View 3 Replies
View Related
Jun 7, 2011
I am trying to recompile a large open source project with the Nvidia Cuda Compiler: 'nvcc' [URL].. nvcc supports all the compile flags that gcc does but not all of the linking options. This shouldn't be a problem however as nvcc generates object files that are compatible with gcc and I should hence be able to compile with nvcc and then link with gcc (linking against the CUDA library).
To compile with nvcc I use:
./configure CC=nvcc
Which successfully creates make files that se nvcc to compile. But the Configuration script does not seem to honor LD=gcc in the same way, ie: ./configure CC=nvcc LD=gcc still tries to link everything with nvcc which promptly fails because nvcc does not support the option '-soname' without which the project will not link correctly. What am I doing wrong? How can tell the config script to link with gcc?
View 1 Replies
View Related
Jan 15, 2011
I have searched google for a couple of days, and I keep hearing about an INode limit on filesystems, but that doesn't seem to be the case.
Now whenever I try to download something, watch a ..... video, or listen to Pandora radio, it just stops playing after 2 seconds. Downloading says "No space left on device".I also get the error as root.I do have 5% and more free of HDD space. After reading the similar posts I checked all of this, so if I am overlooking something on the forum, I apologize for an extra post about.
View 3 Replies
View Related
Apr 28, 2011
I am trying to install NachOS on fedora, i make a nachos directory and download the nachos source code and cross compiler, then i extract the zip files and patch the make files and everything is okay till now. but when it comes to compiling nachos, i followed these steps.
* ~/nachos> cd NachOS-4.0
* ~/nachos/NachOS-4.0> cd code/build.linux
* ~/nachos/NachOS-4.0/code/build.linux> make depend
[code]....
View 10 Replies
View Related
Jun 25, 2010
i heard many times the words tool chain , cross platform compiling , cross platform building etc ...
i can use the tool chain for All Linux OS ...?
View 2 Replies
View Related
Sep 10, 2010
1. I need to use clock_gettime(), in <time.h> it is: extern int clock_gettime (clockid_t __clock_id, struct timespec *__tp) __THROW; and in a successful build .so it is unsolved. In final app to lonk to this .so it is also unsolved. which lib missed in .so or app build?
2. libc include several libs, which are liked by default? say stdc++, rt? rt1/rt2 what does they do?
3. How to find which libc is used or linked?
View 2 Replies
View Related
Jun 29, 2010
[URL]...Now it works in Windows platform. Some functions rely on win-specific code and need to cross-platform alternatives. Can some one help to build chain(make or cmake) for this awesome project? any one can compile the Linux generator and transfer the project under *nix platform.
View 1 Replies
View Related
Feb 28, 2011
whats the different between Chain RH-Firewall-1-INPUT (2 references) and Chain INPUT (policy ACCEPT)?
View 1 Replies
View Related
Dec 6, 2010
I want to run a program under ... something like strace, something like gdb. Let's call the something Fred. Every time I run a particular program under Fred, it detects when a system call is about to take place or a signal has occurred, and traps to Fred, which decides dynamically how to respond, whether the stimulus is a signal or an attempted open(), close(), read(), write(), socket(), connect(), listen(), select(), ioctl(), time(), or whatever. Although strace does this marvelously, what I'd like Fred to do is use code that I supply to doctor up what the subject program sees. In the case of write(), it should be able to modify what actually gets written. In other words, a hard shell environment around the program which completely mediates between the subject program and the outside world. I'll start with the source code for strace and gdb if I have to. But has this been done already?
View 12 Replies
View Related
Dec 11, 2014
I am trying to cross-compile my Qt application for armhf on Jessie, so what I did was install qt5-default:armhf, but when I tried running qmake I found out that it contains also an armhf version of qmake so I was not able to run it.Then I installed the amd64 version to have at least a runnable version of qmake, but it was only to find out that qmake contains only hardcoded paths, so I could not use it for the armhf libraries, well I could but I had to run qmake (amd64 version) and afterwards open the makefile and change all paths from amd64 to armhf.
But as this is not so convenient I was wondering if there is a normal way to do this, I know you can compile the source yourself but I had quite a lot of problems with dependencies there. Is it possible with the standard repository binaries or should I just go back to compiling the source myself? Maybe I can compile only the building tools without building all the libraries I already got from the repository.
View 0 Replies
View Related
Jun 8, 2014
What are the availability`s for cross platform sql , gui, application development using raw code in the Debian environment. I would rather work with raw code. I have been working with PHP MySQL, need to advance to Universe Application Development cross platform Raw Code for both mobile and desk top.
View 1 Replies
View Related
May 14, 2010
I have an odd thing. And thats the following:
I entered: gcc raw.c -m32 -g -static -o raw
And I got:
I installed all bin32 libs I am on a x64 system.
View 6 Replies
View Related
