I am trying to get openswan installed on cygwin. Having issues with that, their mailing list has suggested to cross compile it from linux, and I've had some gcc related errors. So I was wondering what I can use that will install on ubuntu to compile this for cygwin. As am I supposed to run this configure on the gcc package? [URL]
View 1 RepliesI am trying to build cross-toolchain for arm. I dont want ready-to-use solution. I want my own . I want to build toolchain manually, but I cannot compile gcc. When I invoke "make" I get the following error:
Code:
-c ../../../../src/gcc-4.4.2/libgcc/../gcc/config/arm/lib1funcs.asm -include _arm_addsubsf3.vis
/home/ecco/Progs/cross-compilers/build/arm-linux/build/build-gcc/./gcc/xgcc -B/home/ecco/Progs/cross-compilers/build/arm-linux/build/build-gcc/./gcc/ -B/home/ecco/Progs
[code]....
Then, I try to build gcc:
Code:
../../src/gcc-4.4.2/configure --target=arm-linux --enable-languages=c -- prefix=/home/ecco/Progs/cross-compilers/result/arm-linux --with-headers=../../src/kernel_headers_2.6.33.4/include/
Make fails...my arm-linux-gcc is actually can be built. When I do the following:
Code:
make all-gcc
make install
I get my arm-linux-gcc in ~/Progs/cross-compilers/result/arm-linux. So I can compile kernel , but I want user-space , so I do:
Code:
make all-target-libgcc
Make fails when it tries to build libgcc (AFAIK I need libgcc to build glibc). But why does it fails? I have header files like "stdio.h" on my gentoo box. Maybe compiler somehow wants files like "stdio.h" for my TARGET (arm-linux)? But AFAIK these are files are Standart C Library header files, and glibc did not even compiled yet, so I dont have these headers for my TARGET...
I found description of this error here:[URL](gcc part). But when I add additional flags -Dinhibit_libc -D__gthr_posix_h, then make fails when it tries to compile ../gcc-4.4.2/gcc/crtstuff.c with the same errors.
I am trying to nuild executables to run on Windoze under Fedora 12. I have install all of the mingw32 RPMs. Now I just need a URL that discribes how to compile. I am using autoconf and automake. I have done it before but that was installing from Mingw32 source.
View 2 Replies View Relatedi have fedora 11(64 bit).i want to do the cross compilation for 32 bit arm processor.i install all required thing but any of the make command(make,make mrproper,defconfig) is not working.
View 8 Replies View RelatedI want to cross compile gtk program from linux to arm. I am using ubuntu10.04. How can I cross compile it for arm. I have tried this but this is my output:
root@habesh-laptop:~/habesh/gtk# /root/CodeSourcery/Sourcery_G++_Lite/bin/arm-none-linux-gnueabi-gcc -o trail1 base1.c 'pkg-config --cflags --libs gtk+-2.0'
cc1: warning: include location "/usr/include/gtk-2.0" is unsafe for cross-compilation
cc1: warning: include location "/usr/include/atk-1.0" is unsafe for cross-compilation
cc1: warning: include location "/usr/include/cairo" is unsafe for cross-compilation .....
I try to cross compile httpd for power pc.It seems that configure doesn't detect cross compilation. The first error was that sizeof (void*) is less than (long), so I have commented out that check (I think it is a hard work around). I've got another error ./dftables: cannoct execute binary file. Why it tries to execute binary for ppc on x86 machine?This is my build script.
#!/bin/sh
NAME=httpd-2.2.17
PWD=$(pwd)
[code]....
how to cross compile the perl script for arm_v5t.le.gcc??downloaded perl script unable to compile from the cross folder as per the readme.txt instruction
View 1 Replies View Relatedhow to cross compile Mplayer into ARM target board , my target board details are URL...and i have successfully compiled Mplayer in intel pc.
View 2 Replies View RelatedI need to cross-compile some libs for using in a ARM11 board running Linux (at this time, 2.6.28, but I'll try update it... and for costs reason, maybe it turns on a ARM9 board). The libs are libfprint, libusb-1.0 (that is a requirement of libfprint), libSDL (and some of its extensions) and maybe libsqlite3. How I can make this, with the development files in the host machine (an Ubuntu 10.04 32bits machine) and the runtime files at the host ARM11 Board.
View 6 Replies View RelatedI have Slackware 13-64 bit and I would like to cross-compile some Fortran and C programs to windows 32 and 64 bit applications. The Linux versions utilize X11 for the graphical users interface. I have tried MINWG but I could not get it to work, either in pre-built binary or source code form. Is there a binary version that works on Slackware 13? Alternatively, is there another method available?
View 1 Replies View RelatedI want to compile a program with the source I already have but I have to add an option. When I run the command ./autogen.sh the terminal returns aclocal not found. Is it a package or something i have to install?
View 6 Replies View RelatedI'm trying to cross-compile glib-2.24.0 for Linux running on a Freescale PPC CPU and running into one problem after another. My host is running Fedora 13, and there I can compile the same source for the host machine with no problems. For the cross compilation, I'm currently using LTIB (provided already configured from Freescale for my board/CPU).
View 3 Replies View RelatedI'm trying to cross compile wvdial to ARM, wvdial needs wvstreams and wvstreams need openssl and zlib. I've managed to cross compile openssl 1.0.0d;
View 3 Replies View RelatedI wanted to compile a program for my openwrt router from source i already have but to add an option. I ran ./autogen.sh in the terminal but it returned aclocal not found.
View 5 Replies View RelatedI'm trying to cross compile the GNU make for Alpha Architecture on my i686 PC and the GNU make i compiled would be placed in my virtual hard disk which is a Alpha based linux simulated system. My question is now , I'm able to cross compile the GNU make on my i686 real PC machine , but when i let the make program run in my virtual machine , it pops out the error ..
make: /lib/libc.so.6.1: version `GLIBC_2.4' not found (required by make)
After that, I try another alternative , and I read through the file "INSTALL" on the GNU make directory that I downloaded from the internet . In this case , I downloaded make-3.81. On the sub section "Compiling For Multiple Architectures" It says that
"You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run the `configure' script.`configure' automatically checks for the
source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not support the `VPATH'
variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the
package for one architecture, use `make distclean' before reconfiguring for another architecture." And I do not understand the line "by placing the object files for each architecture in their own directory" . What object files that I should put ?
First, I'm trying to cross compile mono 2.6.4 so that it will run on Freescale Embedded Linux for a PowerPC CPU. My host machine is running Fedora 13 on an x86. Freescale provides a copy of the Linux Target Image Builder (LTIB) that has been pre-configured for the particular board I'm using, and LTIB seems to be able to help with the cross compilation of other stuff--you can add in your own packages to be built and included in your newly-built Linux image.
Mono depends on pkg-config and glib-2, so I have selected them in the LTIB package selection config. I've also added a new package for mono that builds mono-2.6.4 from the source tar (after the other deps have also been built).
I'm having a problem getting the glib-2.24.0 package libraries created. Basically they appear to build and link ok, but then libtool runs and errors out claiming it has a syntax error! (numerous wths followed...)
Here is LTIB's temporary build script for only the glib2 package:
Code:
Here is the output when building the glib2 package (configure + make):
Code:
Build path taken because: directory build, build key set, no prebuilt rpm,
I have a program that is completed under Linux, it requires library tidy, PCRE and libcurl, which could be found in Cygwin too.
I could compile my linux program through Cygwin and produce an EXE file, however it do require 'cygwin.dll' installed by the users.
I am wondering if I could have someway to produce out a stand-alone EXE file that could run independently from Cygwin ? ( I don't mind to combine that cygwin.dll and the EXE together for a larger EXE file).
I am trying to cross compile the "libtorrent-rasterbar-0.14.8" i got the error
Code:
checking for boostlib >= 1.35... yes
checking whether the Boost::System library is available... yes
[code]....
I'm trying to cross-compile "sudo" source for Power-PC platform using Montavista tool chain. I'm getting the following error message during configuration: checking host system type... Invalid configuration `ppc_82xx': machine `ppc_82xx' not recognized It is clear that it has found the cross-compiler and configure knows that we are cross-compiling but it fails to recognize the machine. The complete dump follows:
[vhn@localhost sudo-1.7.2p2]$ ./configure --host=ppc_82xx
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
configure: Configuring Sudo version 1.7.2p2
checking whether to lecture users the first time they run sudo... yes
checking whether sudo should log via syslog or to a file by default... syslog
[Code]...
I am trying to cross compile php for "arm" target using "arm-angstrom-linux-gnueabi" tool chain. Apache compilation was successful after using a few ac_cv configuration options(and a few others to get rid of compile errors). But was unable to compile php for the target, as the 'apxs' file used was not executable in the build machine.
I tried creating an apxs file for the build machine architecture(intel 686), and using it. It was able to compile then, but still php page is not getting displayed on the web server. (Have done the procedures like, loading the libphp5 module on httpd conffile and all)
i know whether openswan-2.4.8 can install on centos 5.3.becoz i download openswan-2.4.8.tar.gz and after some changes in the configuration file, i verify ipsec..it runs all ok..then i do service ipsec start.then lot of errors happen.. is it possible to clear the errors..is any body succeeded in it.my distro version 2.6.18-128.el5.i am plan to setup an openswan vpn with certificate to tunnel a windows XP client.
View 1 Replies View RelatedI'm trying to setup openswan but it will not create a key.Any ideas how to?
View 19 Replies View Relatedi want to setup a vpn for that i install openswan and l2ptd. both are installed from tar balls. after that i configure /etc/l2tp/l2tp.conf and /etc/ppp/options.l2tpd and /etc/ppp/chap-secrets files.what can i do to start l2tpd service
View 1 Replies View RelatedFor some reason, I can't get openswan 2.6 to work with my configs. In Ubuntu I can easily install openswan 2.4 from legacy repository. What is the right way of doing this in Fedora (13)?
View 3 Replies View RelatedHello, I've installed OpenSwan with xl2tpd on my server, and set it up for roadwarriors connecting using certificates.
My server is Debian 5.0.8, I am running xl2tpd 1.2.0, and Openswan IPsec 2.4.12, my clients are all Windows, and I am testing my setup on a Windows 7 client.
I have no problem connecting to the server, but after some time the connection drops. I removed the idle option from the ppp config but it does not make any difference.
Even when I create constant traffic with ping -t the connection drops also.
I have no problems reconnecting right away.
I have been hacking at this for a couple of days, reading every post I can find, but I have not found a solution to my problem.
Here are my configs and logs:
CONFIG FILES:
/etc/ppp/option.l2tpd
-----------------------------
ms-dns 10.248.75.4
ms-wins 10.248.75.4
asyncmap 0
auth
crtscts
[Code]....
When implement openswan in redhat5 and start ipsec appear this problem
whack: Pluto is not running (no "/var/run/pluto/pluto.ctl")
what this file contain
and when run this command
ipsec verify
Checking your system to see if IPsec got installed and started correctly:
Version check and ipsec on-path [OK]
Linux Openswan U2.4.10/K2.6.18-8.el5 (netkey)
Checking for IPsec support in kernel [OK]
Testing against enforced SElinux mode [FAILED]
SElinux is running in 'enforced' mode. Since no working SElinux
policies exist for Openswan, SElinux should be disabled.
echo "0" > /selinux/enforce (or edit /etc/sysconfig/selinux)
NETKEY detected, testing for disabled ICMP send_redirects [FAILED]
Please disable /proc/sys/net/ipv4/conf/*/send_redirects
or NETKEY will cause the sending of bogus ICMP redirects!
NETKEY detected, testing for disabled ICMP accept_redirects [FAILED]
Please disable /proc/sys/net/ipv4/conf/*/accept_redirects
or NETKEY will accept bogus ICMP redirects!
Checking for RSA private key (/etc/ipsec.secrets) [DISABLED]
ipsec showhostkey: file `/etc/ipsec.secrets' does not exist
Checking that pluto is running [FAILED]
whack: Pluto is not running (no "/var/run/pluto/pluto.ctl")
Two or more interfaces found, checking IP forwarding [FAILED]
whack: Pluto is not running (no "/var/run/pluto/pluto.ctl")
Checking NAT and MASQUERADEing [OK]
Checking for 'ip' command [OK]
Checking for 'iptables' command [OK]
I want to connect OpenVPN to office network. I receive mail where is openswan configuration file, but I want to OpenVPN
conn CONNECTION-NAME
disablearrivalcheck=no
type=tunnel
left=IP MY SERVER
right=IP OFFICE SERVER
rightsubnet=LOCAL IP SERVER IN OFFICE/32
[Code]....
From where I can download Openswan for my RHEL 5. Please if possible, give me installation and configuration manual.
View 3 Replies View Relatedi need to build an ipsec vpn between a linux debian server and a zyxel prestige, The debian server got 2 ethernets connection one for the internal network and the other one is public with a public ip adress.I need to know what i need for the build the tunnel, could you please let me know what i need? Let me explain i have only to configure openswan or i have to configure the iptables or somethings else too? I found this one do you think this would be work for me? [URL]..Is debian a right distro or should i try someone else?
View 2 Replies View Relatedcan't find a decent forum (sourceforge.net has an awkward forum platform). I am having trouble getting a2ps to run under Cygwin on a Windows-7 box. And if you know of a forum specifically for users of a2ps
View 1 Replies View Related