Software :: CD/DVD Seen, But Not Accessible?
Jul 26, 2010
I have used Linux in various versions for a while. I am tasked with "resurrecting" older PC's for a "thrift" shop here. I load Linux and Open Office on them. I have a PC now that had Xubuntu loaded on it that worked fine. I had to load Ubuntu 9.1 on it as I did not have the passwords. The system loaded fine from a CD. When I boot the system now and look at the computer's resources, I see the hard disk, the CD drive, and the DVD drive. However, when I place a CD or DVD in either of the drives, that drive disappears.If I place the Ubuntu CD in the drive it will boot fine.
View 1 Replies
ADVERTISEMENT
Jul 2, 2011
I have a fat32 disk plugged into my mobo on my desktop machine. It has no o/s installed and I'm running Ubuntu 10.04 LTS live to access and retrieve the data on that disk.
Code:
fdisk -l
shows the disk as being a Windows 95 fat32 file system disk
[code]...
View 9 Replies
View Related
Mar 14, 2011
I am facing a little problem with names servers.have a VPS with Kloxo installed on itI have registered 2 name servers (i.e. ns1.domain.com and ns2.domain.com) past one month.These nameservers are not accessible yet. I have check the nameserver on internic site and they are registered with the correct IP. But if I access it online via Internet explorer or nslookup I get server not found. And if I put ip address in IE I get the default page of my server
View 6 Replies
View Related
Feb 19, 2010
I just installed Fedora 12 and after booting up to Gnome, I put in my install DVD and it says no media is detected. When I view the hardware on the system, it lists my DVD drive. I had the same problem in Fedora 9. I assumed it was a bug in the system and always used my laptop to download and burn media (Fedora 11). I can't burn to empty media or read data from a readable disc.
View 2 Replies
View Related
Jun 13, 2011
I am a complete Linux/Ubuntu Noob and researched the issue and came up with nothing. I cannot figure out how to access my CD/DVD drive. Places >> Computer shows nothing and neither do any of the sub components. I don't know enough about the console to try to access the drive from there. Every time a user gets close to a solution (to my knowledge), contributors stop replying and the years roll on.
I have tried:
Code:
eyesonyou@ubuntu:/dev$ dir cd*
cdrom cdrw
eyesonyou@ubuntu:/$ cdrom@
cdrom@: command not found
[Code].....
View 7 Replies
View Related
Sep 23, 2010
I am on home internet access so it does not have a fix IP. I would like to set my web server to be accesible from outside. So what I do? First I must set my router to point access for port 80 to this machine. Then in the machine I open port 80 right? Then what software must I install is it no-ip?
View 3 Replies
View Related
Mar 22, 2011
i have configured the samba as pdc in debian squeeze,in the "View Workgroup Computers" window of windows xp there is linux shared folder icon but when want
to open the folder get this error: \LinuxcpShared is not accessible. you might not have the permissions to use the network resources. Contact the administrator of this server to find out if you have access permissions.
View 1 Replies
View Related
Jan 11, 2011
How do I find, for example, what version of gfortran is available for Fedora 14 without having to boot Fedora?
From the Fedora Home page or the wiki. I could not find a list of browser-accessible sites for Fedora-14-compatible software. I have in mind something like the Debian repository.
Searching with Google is a problem because of the competing fedora-commons.org repository and the multiplicity of names like RHEL and EPEL that may not be compatible with Fedora and may not be free.
View 9 Replies
View Related
May 7, 2010
I'm having an issue setting up users for file sharing. In Ubuntu 10.04 (which is awesome btw) I right click the file, and share it on the network. I can see it right away on other machine, and login using the main user account on the server, no problem. I get an issue when I try to login to the share using additional account I setup. I get to the login screen, and it seems to accept the username and password as being valid (it doesn't bring up the login screen again), instead it brings up a error message saying it's unable to mount the share. It seems so much like a permission issue. I don't want to grant all kinds of access for these users, what do I do?
View 1 Replies
View Related
Aug 16, 2010
I am running virtualbox 3.2.8 and whilst I can use my USB keyboard my Canncon LIDE scanner, USB exble ternal hard drive and a logitech joystick I cannot access my Cannon IP4700 printer or Samsung laser printer.All my USB devices are recognized in the vbox settings nut are not recognized by guest win7 0r xp-pro any clues?
View 6 Replies
View Related
Oct 28, 2010
I'm running Ubuntu 10.04 and Samba 4.The folder I've shared is on NTFS partition and though is visible from other Windows 7 system on LAN, can't be browsed. Even from my own computer if go to network places the folder is there but when I double click on it I get
View 9 Replies
View Related
Apr 1, 2011
I have a problem with apache server. The thing is - I can connect to my server on localhost, but when I try to connect from local network, it doesn't reply.
I can ping my web server from lan. I can ssh my web server from lan.
I haven't modified iptables since install except these commands>
Code:
iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d $MY_SERVER_IP --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT
iptables -A OUTPUT -p tcp -s $MY_SERVER_IP --sport 80 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT
[Code].....
View 1 Replies
View Related
Sep 1, 2011
I download something all the files and folders have root permission. So I can't do anything. I can change them all to have permission for me but it takes like an hour for one download. How do I make EVERYTHING accessible to me?
View 6 Replies
View Related
Jul 3, 2011
No SATA capable systems around the house to test this drive out, but with a SATA to USB converter I have been able to access SATA drives except this one particular Seagate drive. Upon connecting this drive dmesg shows
Code:
[173156.023440] usb 1-1.2.3: USB disconnect, device number 25
[173181.235788] usb 1-1.2.3: new high speed USB device number 26 using ehci_hcd
[code]...
View 14 Replies
View Related
Mar 23, 2010
I have webmin 1.500 installed on my Ubuntu.I can access webmin on the ubuntu machine using
"https://localhost:10000" (10000 is port no.)But I cannot access it from other computers.I have dial-up connection on ubuntu.I have also added port 10000 usingsudo iptables -A INPUT -p tcp --dport 10000 -j ACCEPT
View 11 Replies
View Related
Mar 25, 2010
I have an application driver that I can insert into the linux-2.6.22.6 kernel, but when I run other application to call this driver in the kernel, it seems like the call can not access the driver
View 2 Replies
View Related
Jun 26, 2011
I am not able to access yum repository from client but able to access yum from server through ftp.I am getting the below error from client system as,
Client Config:--
[root@Client ~]# cat /etc/yum.repos.d/client.repo
[Client]
name=Client Repo
baseurl=ftp://1.1.1.1/pub/package
[Code].....
I also had remove the repodata directory from server & again configured the yum repository through createrepo but still getting the same error from client.
Is there any SElinux policy need to be enabled ?
I am able to ping 1.1.1.1 (server) from 1.1.1.2 (client).
View 6 Replies
View Related
Apr 27, 2010
using OEL 5.4, which uses Gnome 2.16 interface I can see my share from Windows, but whatever I do, I get messages that my share is not accessible. The whole user thing is quite complex, dont understand what user I should use on Windows, what password, what user should have what rights on linux.
I'll post smb.conf tomorrow ... The problem is that Windows lacks any decent error message, stating what kind of error message. Is there no Samba client for Windows?
View 6 Replies
View Related
Feb 4, 2011
I used vmware to create a guest OS in vmware.The IP of Guest Ubuntu is 192.168.43.129 and that of host Ubuntu is 192.168.1.3
Here is apache log when I access the site on machine where it actually is (guest os) as http://localhost
the apache log shows
Quote:
127.0.0.1 - - [04/Feb/2011:22:18:29 +0530] "GET /some/templates/default/images/ButtonsBack.gif HTTP/1.1" 304 - "http://localhost/some/templates/default/delos.css" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.8) Gecko/2009033100 Ubuntu/9.04 (jaunty) Firefox/3.0.8"
[Code]....
View 2 Replies
View Related
Jun 20, 2011
I'm installing Liferay as a WAR on Tomcat 6 on a new Ubuntu server.I want my portal accessible only via HTTPS, that's why I've enabled it via Apache.My config :Apache 2 (/etc/apache2/sites-enabled/001-https)
Code:
<VirtualHost my.domain.com:443>
ServerAdmin admin@domain.com
[code]....
View 6 Replies
View Related
Oct 13, 2010
For a while now GMANE has put up GWENE which is an RSS/Atom feed to Usenet portal. I have just created groups for all Slackware ChangeLog Feeds available at [URL]
Slackware Security: gwene.com.slackware.security
Slackware 32bit Current ChangeLog: gwene.com.slackware.current.changelog
Slackware 64bit Current ChangeLog: gwene.com.slackware64.current.changelog
SlackBuilds.org ChangeLog: gwene.org.slackbuilds.changelog
AlienBOB's SlackBuilds Changelog: gwene.com.slackware.alien.slackbuilds.changelog
AlienBOB's Blog Entries: gwene.com.slackware.alien.blog
Sadly the Slackware stable feed is busted, so there is no point in adding it. Heres an example how to setup your news reader:[URL] You just need to use news.gwene.org instead of news.gmane.org as server. Note that the gwene server includes gmane so you dont need to have both. I am also considering adding AlienBOBs feed [DONE]
View 5 Replies
View Related
Dec 31, 2010
I have reinstalled CentOS 5.5 on my un-managed VPS. Everything is fine except port 80
I am trying to access IP address in Internet Explorer but seems port 80 is not accessible.
I have checked by changing Listen 80 to Listen 90 in httpd.conf
and accessed the ipaddress with port 90 i.e. 208.89.213.70:90 and apache page was displayed
I need help on how to resolve this issue
View 1 Replies
View Related
Aug 29, 2015
Just setup with Debian 8 (LXDE) a few weeks ago. Raid10 array was preexisting.
Was working well. After booting I would need to go to the save as then would need to enter the root password and everything would be good.
Can't access the array.
Used to use the command $ mount /dev/dm-o /home/myspace/folder under Debian 7.6 to mount the array (no longer works).
blkd lists a /dev/md0 but instead of UUID it is PTUUID
[Code] .....
View 0 Replies
View Related
Feb 23, 2015
I did a fresh install of Jessie 32-bit on an older PC and my WD My Passport Ultra is no longer recognized . It shows up on lsusb. I also IDed it as being sdf but... when I now try to mount it
Code: Select all/usr/bin/udisks --mount /dev/sdf /media/ manually I get:
Mount failed: Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdf,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
View 2 Replies
View Related
Jan 5, 2009
I'm having some troubles with my samba shares on a fresh install of Fedora 10 x86_64 on my laptop. The laptop has only the KDE Desktop environment. I'm trying to share between this computer and my homebrew server via a wrt54g linksys router running DD-WRT firmware. The server is running Fedora 9 i386.
The shares on the server can be read by the laptop, and I have been consistently able to mount the server shares on the laptop using mount.cifs, but only when the firewall on the server is down. Shares are only visible between the machines when the firewall is down on the machine containing the share. I set up the shares using the system-config-samba tool, and the firewalls are both set to allow samba server and samba client. I can typically see the laptop from the server, but not the shares, and only when the laptop firewall is disabled. I can access the Laptop shares from the laptop. When trying to mount the laptop shares on the server, a warning message stating that the mount failed appears. Shares show up as correct in both the system-config-samba tool, and the KDE sharing tools. The share shows a "shared" icon in the dolphin browser.
From all that I know, the shares should work perfectly. I've searched the web, perused the man pages and how-to's, and combed through the forums, and everything I've found tells me that the shares should be working. Since they are not working, it leads me to believe that I must have made a mistake someone and not noticed it.
View 8 Replies
View Related
Sep 22, 2009
i am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name server.onkie.com . nmap localhost
[Code]...
View 1 Replies
View Related
Sep 22, 2009
I am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name [URL].. . nmap localhost
Starting Nmap 5.00 ( http://nmap.org ) at 2009-09-22 21:24 IST
Interesting ports on onkar (127.0.0.1):
Not shown: 993 closed ports
PORT STATE SERVICE
22/tcp open ssh
53/tcp open domain ----the dns is running
[Code]...
I already disabled my selinux and iptables ..but then also it's not accessible in Lan .
View 1 Replies
View Related
Nov 26, 2009
My school computer Crasht, so i thoug hey i wana create a linux server, so do anyone know how to make a Fedora server that can be acest thru the wanport ( acest thru the web ) for sharing school stuff etc ... any one know? or know where i shoud look for manuals?
View 1 Replies
View Related
Feb 27, 2010
I have a Western Digital 1TB USB Drive. It is detected,but can only be seen and accessed by the first user account that logs in after boot. If I right click "My Book" (the name of the drive) then look at permissions it says that the permissions are unknown. I looked around and could find nothing about this problem. I did find some information about udev and saw a mention that you could use it to set permissions. However when I try to input the command the terminal gives me a command unknown, then asks if I want to install udev, I say yes and am then told that udev is installed. I found the command to update udev, but it says that updates are not needed. Help I want this drive to be at least readable by all users, and it would be nice if I could allow write access only to me. I did do a "dmesg" right after I plugged this drive in
View 3 Replies
View Related
Jul 26, 2011
I have been trying to set up a small file server on Fedora 15 using Samba. When I try to connect from WindowsXP it says the network is not accessible. I have tried to make multiple changes to the settings but to no avail.
View 1 Replies
View Related
