Fedora :: Browser-accessible Repositories ?
Jan 11, 2011
How do I find, for example, what version of gfortran is available for Fedora 14 without having to boot Fedora?
From the Fedora Home page or the wiki. I could not find a list of browser-accessible sites for Fedora-14-compatible software. I have in mind something like the Debian repository.
Searching with Google is a problem because of the competing fedora-commons.org repository and the multiplicity of names like RHEL and EPEL that may not be compatible with Fedora and may not be free.
View 9 Replies
ADVERTISEMENT
Jul 22, 2011
It resides at 65.211.112.135 There are numerous domain names on this ip [URL]s Those are a few of them. Now if you try to ping 65.211.112.135 it does not respond, if you ping "www.barrierfree.us" it says pinging 65.211.112.135 but it also does not respond. BUT if you point your browser to one of the above domain names it will work, but it is quite slow.
View 9 Replies
View Related
May 9, 2011
I am using Fedora 14 right now and i can't figure out how to put in adobe flash player into the plugin repositories of the browser.
Does anyone know how to get it working so I can view ..... videos and or any other media file? Maybe step by step from the start? I downloaded adobe flash player version 10.2.159.1 all ready. I don't know if I should uninstall it then reinstall... Well enough of my rambling I'll let the veteran users have the final say.
View 8 Replies
View Related
Feb 9, 2011
I am running Suse 11.1 64bit, with KDE, recently I received a pop up on my screen, "something about update problems", I used Yast 2 and selected online Update and it couldn't find updates for Nvidia and froze at that point. I dis-enabled that repository and refreshed all of the remaining Repositories individually and it seemed to work. I then went to the repositories listing and selected "Add" and selected "community" repositories and received the following: WARNING Unable to download list of repositories or no repositories defined. What is my problem? How do I acquire the list of community repositories? I can live with out the Nvidia repository for now but would eventually like to get it back.
View 2 Replies
View Related
Jan 9, 2010
I just installed ubuntu because the newer versions were not working for me. So I installed 7.10 and there is no repositories that are still up. Is there any repositories that I could add from the newer ones or other distro repositories.
View 8 Replies
View Related
Feb 19, 2010
I just installed Fedora 12 and after booting up to Gnome, I put in my install DVD and it says no media is detected. When I view the hardware on the system, it lists my DVD drive. I had the same problem in Fedora 9. I assumed it was a bug in the system and always used my laptop to download and burn media (Fedora 11). I can't burn to empty media or read data from a readable disc.
View 2 Replies
View Related
Jan 5, 2009
I'm having some troubles with my samba shares on a fresh install of Fedora 10 x86_64 on my laptop. The laptop has only the KDE Desktop environment. I'm trying to share between this computer and my homebrew server via a wrt54g linksys router running DD-WRT firmware. The server is running Fedora 9 i386.
The shares on the server can be read by the laptop, and I have been consistently able to mount the server shares on the laptop using mount.cifs, but only when the firewall on the server is down. Shares are only visible between the machines when the firewall is down on the machine containing the share. I set up the shares using the system-config-samba tool, and the firewalls are both set to allow samba server and samba client. I can typically see the laptop from the server, but not the shares, and only when the laptop firewall is disabled. I can access the Laptop shares from the laptop. When trying to mount the laptop shares on the server, a warning message stating that the mount failed appears. Shares show up as correct in both the system-config-samba tool, and the KDE sharing tools. The share shows a "shared" icon in the dolphin browser.
From all that I know, the shares should work perfectly. I've searched the web, perused the man pages and how-to's, and combed through the forums, and everything I've found tells me that the shares should be working. Since they are not working, it leads me to believe that I must have made a mistake someone and not noticed it.
View 8 Replies
View Related
Sep 22, 2009
i am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name server.onkie.com . nmap localhost
[Code]...
View 1 Replies
View Related
Sep 22, 2009
I am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name [URL].. . nmap localhost
Starting Nmap 5.00 ( http://nmap.org ) at 2009-09-22 21:24 IST
Interesting ports on onkar (127.0.0.1):
Not shown: 993 closed ports
PORT STATE SERVICE
22/tcp open ssh
53/tcp open domain ----the dns is running
[Code]...
I already disabled my selinux and iptables ..but then also it's not accessible in Lan .
View 1 Replies
View Related
Nov 26, 2009
My school computer Crasht, so i thoug hey i wana create a linux server, so do anyone know how to make a Fedora server that can be acest thru the wanport ( acest thru the web ) for sharing school stuff etc ... any one know? or know where i shoud look for manuals?
View 1 Replies
View Related
Feb 27, 2010
I have a Western Digital 1TB USB Drive. It is detected,but can only be seen and accessed by the first user account that logs in after boot. If I right click "My Book" (the name of the drive) then look at permissions it says that the permissions are unknown. I looked around and could find nothing about this problem. I did find some information about udev and saw a mention that you could use it to set permissions. However when I try to input the command the terminal gives me a command unknown, then asks if I want to install udev, I say yes and am then told that udev is installed. I found the command to update udev, but it says that updates are not needed. Help I want this drive to be at least readable by all users, and it would be nice if I could allow write access only to me. I did do a "dmesg" right after I plugged this drive in
View 3 Replies
View Related
Jul 26, 2011
I have been trying to set up a small file server on Fedora 15 using Samba. When I try to connect from WindowsXP it says the network is not accessible. I have tried to make multiple changes to the settings but to no avail.
View 1 Replies
View Related
Jan 4, 2010
I've used dvd+rw-format -format=full /dev/sr0 and K3B to format a blank DVD RW.I reinsert the disk and it's not seen or auto-mounted as writeable media. In the past, I've written one file to a blank DVD RW in Windows XP, insert the disk back into Linux and I can use Dolphin to read and write to the disk as though it had been auto mounted as a removable storage media device in KDE4.Is there a solution to use a blank DVD RW as an easily accessible, writeable media in Linux?
View 6 Replies
View Related
Mar 3, 2010
After a recent update and reboot, I can no longer access the internet. Typing google.com in firefox or elinks results in firefox/links complaining about the server not found. However, I can find the server by using dig on the command line. I have checked the DNS configuration in resolve.conf and it is exactly the same as on a RHEL 5 system connects fine. The strange thing is, I can connect to other local machines in my domain just fine but can not connect to any other machine on the internet on this one Fedora 12 host even though I can on all other machines!
View 11 Replies
View Related
Feb 2, 2011
I'd like to share files between two Fedora 14 systems, but I'm having difficulty with making a share accessible via NFS.
Here's what I've tried so far:
Tried following mount commands:
Password:
Unable to find suitable address.
Used both the user and root password with this second mount command.
View 7 Replies
View Related
Jun 29, 2011
Currently I am trying to get some fedora shares to simply connect to each other to access a read-only shared folder on a host machine (no security/encryption even required for these files!). I've tried to get a smb network share going but that didn't work (can't connect with nautilus), I've tried a quick fix with daap and rhythmbox so that they can at least access the music, but rhythmbox fails very miserably trying to connect/create that (and mt-daapd didn't help much) - Basically I get errors saying the host is unreachable.
I haven't even set up a firewall yet for this network and already I'm running into these fundamental problems. Currently I'm using Fedora 15. On a whim I tried the "public" folder and had sharing of the public folder over the network enabled - yep, didn't work (and I certainly didn't expect it to). I would be trying some more advanced CLI stuff, setting up an ssh server or something, but the computer-challenged people who have to access these files just want to be able to click something and have it work.For the operational requirements of this setup, a file synchronisation system would work (although highly inefficient since it would mean gigabytes sent over the network).
View 4 Replies
View Related
Mar 5, 2009
I want to have my Fedora 10 computer act as file storage and access it from my Windows computers.
Details:
Fedora 10 box is fully functional and connects to the internet using a wireless card to my Linksys 54G router. I've configured the smb.conf file to workgroup MSHOME, and assigned it an IP of 192.168.1.150. I've also set it to turn on smb at boot. Windows XP Home is hard wired to the same router with the standard Workgroup of MSHOME. Windows is set to obtain IP and DNS automatically. There's another Windows XP Home system that's also wireless on MSHOME that I can interact with fine from the main Windows comp. Ping results to 192.168.1.150 results in Request timed out.
View 2 Replies
View Related
Jan 25, 2010
So if I do
dmesg | tail and find out that
lp0: using parport0 (interrupt-driven).
lp0: console ready
[root@Juha Juha.Koskiniemi]# cat /proc/bus/usb/devices
What is it fro following?
lspci
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
02:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
02:00.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 02)
02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03)
02:02.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
And how to evaluate the list of cat /proc/bus/usb/devices? I am asking this since seems that parport is recognized but why I can not access the it to via gtkteminal by using /dev/lp0
QGtkStyle cannot be used together with the GTK_Qt engine.
Qt: Session management error: None of the authentication protocols specified are supported
opening failed
How to edit thread header since the misspelling?
View 2 Replies
View Related
Jul 15, 2010
In windows 7, I had 5 partitions on a hard disk: C, D, E, F, G . I installed Scientific Linux 5.0 on C partition and it removed Win 7 . It's graphic mode didn't work, also I couldn't access to the other drives. I replaced it by Fedora 13. I can work graphically Fedora but when I mount the other drives, just D drive is visible! Is there any solution that I could access to the data on other drives? By the way, the following is the output of fdisk -l .
[root@Niki ~]# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
Disk /dev/dm-1 doesn't contain a valid partition table
Disk /dev/dm-2: 38.3 GB, 38319161344 bytes
255 heads, 63 sectors/track, 4658 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 1 Replies
View Related
Apr 16, 2011
Have previously moved my ssh server from 22 to 4455 just by moving the port in sshd_config. This is done to minimize the log entries resulting from brute force attacks.However, it seems like Zimbra and other local services expect to find the ssh service locally available on port 22, so I figured it's better to move the port in the firewall so that it remains configured on port 22 in sshd_config, and instead use iptables with a nat/port rewrite to move 4455 incoming to 22 locally.
Isolated this works as long as I also keep allowing port 22, but the moment I close port 22, port 4455 is also dead, which sort of defies the purpose
View 2 Replies
View Related
Jan 30, 2011
I am running Suse 11.1.I do the following:
Click on Software Repositories
Click Add
Click Community Repositories
Click Next.
I receive an error, "Unable to download list of Repositories or no repositories defined."
in the /etc/YaST2/control.xml the external repository is:download.opensuse.org/YaST/Repos/openSUSE_111_Servers.xml
View 9 Replies
View Related
Nov 13, 2010
I've a flash drive that it's partitions formatted as fat32, ex4 and encrypted ext4. It works fine on the system that I've formatted it on, but when I try to use it on my other Linux distributions I get these problems:
* ext4 partition accessible by root only.
* after entering my pass-phrase I get
Code: /dev/mapper/udisks-luks-uuid-***** uid1000 is mounted What I'm asking for is a way to create the ext4 file system without being attached to some UID and to be accessible by any user.
View 1 Replies
View Related
May 11, 2011
This is a simple question which hopefully has a simple answer. How do I set up a directory on my user account which is visible and accessible to other users on the *same machine*? For example I have certain files on my account which, if I want another user to be able to access I'd have to (a) copy them to my thumb drive (b) log out, (c) log in to the other account, (d) copy the files from the usb thumb drive
View 13 Replies
View Related
Jun 16, 2011
I have an acer aspire one laptop that runs linpus lite, which is based on fedora 8. I have noticed that my update software no longer works and was wondering if the problem was that the repo had gone.
View 3 Replies
View Related
Mar 28, 2010
When I tried to install OpenOffice I noticed that there are no packages with Java from Sun in standard repositories for Fedora 12.Could someone explain why the Sun Java is not available in the repositories and how to install it?
View 1 Replies
View Related
Jun 6, 2010
Repository configuration for Fedora 13, and a few earlier releases. I don't see these repositories mentioned together on one page or web site, so I thought I'd throw this together.
[URL]
You'll need the RPMFusion repos, so hit the link and follow the instructions there.
[URL]
If you want to be able to play DVD video you'll need a file called libdvdcss so you'll need the Livna repository. To set up the Livna repository, open a terminal and type
Code:
su -c 'rpm -ivh http://rpm.livna.org/livna-release.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-livna'
Then install libdvdcss with the command
Code:
su -c 'yum install libdvdcss'
Adobe
The Adobe repositories provide the Adobe Reader and the flash plugin. To install this repository issue the following commands:
Code:
su -c 'rpm -ivh http://linuxdownload.adobe.com/adobe-release/adobe-release-i386-1.0-1.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-adobe-linux'
To install Adobe Reader issue the following command:
Code:
su -c 'yum install AdobeReader_enu'
This reader is available in several languages. The one above is the English version. To list all available issue the following command:
Code:
yum list AdobeReader*
You'll see several listed. To get more information on a particular package use something like:
Code:
yum info AdobeReader.chs
Available Packages
Name : AdobeReader_chs
Arch : i486
[code]....
I prefer to leave these additional repositories disabled (with the exception of RPMFusion of course) after I've gotten what I need from them. At that point they don't need to be enabled, but there's no harm done if they are. To disable any of the repositories you've installed open the corresponding file with a text editor. Using Livna as an example:
Code:
su -c 'nano /etc/yum.repos.d/livna.repo'
Find the first instance of the line that reads enabled=1 and change it to read enabled=0. Save and exit the editor. The Livna repository is now disabled.
View 13 Replies
View Related
Sep 20, 2010
I am curious as to why Firefox 3.6 isn't in the Fedora 12 repositories. I've read the existing threads on this issue, but these threads were started in January/February of this year. It's been what, 8 or 9 months since those threads were created? I installed Fedora 13 at home over the weekend and realized that it uses Firefox 3.6.
I'm not trying beat a dead horse. I understand that people have priorities.
View 3 Replies
View Related
Jan 10, 2011
I did an upgrade from Fedora 12 to Fedora 14 using a DVD.My repositories all still point to Fedora 12 programs. What do I have to do to make them access Fedora 14 programs ?
View 8 Replies
View Related
Jun 18, 2010
I'm having a hard time locating the one's I need.
View 1 Replies
View Related
Sep 10, 2010
What repositories did you set up from within Fedora 13.
View 2 Replies
View Related
