Ubuntu Servers :: Apache Virtual Host To Access Internal Server?
Apr 20, 2010
I'm not sure is this is possible or not, but what I would like to do is take my public address mydomain.com and configure a virtual host something.mydomain.com only instead of having the content on the same server I would like it to point to the IP of my virtual machine that is in my private network and display that page publicly. Does anyone know if this is possible, or how to do it? I have done this with port forwards, but would like them both to be on the same port.
View 3 Replies
ADVERTISEMENT
Jan 24, 2010
I am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
View 5 Replies
View Related
Mar 6, 2011
I currently have an Apache Web Server running on Ubuntu 10.4 and I use a DynDNS service to make them accessible to the outside world via a domain and/or subdomain.
My configs currently look like this:
<VirtualHost *:80>
ServerAdmin <obscured>@<obscured>.com
ServerName <subdomain>.<obscured>.com
ServerAlias <subdomain>
[Code].....
This works fine from access outside of the network and all subdomains resolve to the correct directory.
The problem I am having is with accessing a subdomain over my internal network.
I can access the Web Server using the server's IP address: http://192.168.1.123/ but this always takes me to the same virtual host and I don't know how to distinguish between different virtual hosts (different subdomains).
Ideally I would like to access the same subdomains using http://<subdomain>/ where <subdomain> is the same as the subdomain attached to the external domain name.
View 2 Replies
View Related
Jul 3, 2009
apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 Replies
View Related
Feb 22, 2011
I am trying to set up an Apache2 virtual host to test sites I make from my own computer.
I used this guide to set up my LAMP and vHost, The LAMP stack seems to be working great, but I run into some problems when I try to set up a vHost
As described in the guide I
1. made a new directory in my home folder /home/[myname]/www/test.dev to put my site in (it currently contains a simple index.html file as a test).
2. In /etc/apache2/sites-available I copied the file "default" and renamed it "test.dev"
3. I edited the content of "test.dev" to look like this:
Code:
4. I enabled the site using the command "sudo a2ensite test.dev". I then restarted apache "sudo /etc/init.d/apache2 reload".
5. I edited the hosts file: "sudo gedit /etc/hosts" to look like this:
Code:
6. I restarted apache "sudo /etc/init.d/apache2 reload".
Now if I enter "http://test.dev" in my firefox's adress bar I just get the apache2 "It works!" site. What is going wrong to cause firefox to show the "It works!" page rather then my own test site?
View 1 Replies
View Related
Jan 18, 2011
I've set up a server running Ubuntu 10.10 (desktop) with apache. Problem is: When I try to configure multiple virtual hosts I can only access the first one. I'm sure that I'm missing something basic in my setup, but I cannot seem to figure out what.
What I want is simply two virtual hosts, one only available on the LAN where I can test my php files and one "live" available from the outside.
Heres what I've done:
Installed Apache2.2
Copy /etc/apache2/sites-available/default -> /etc/apache2/sites-available/dev
Modified "dev" config DocumentRoot and Document to point to /var/www/dev
Modified "dev" config VirtualHost to <VirtualHost *:1337> (port change right?)
Modified "default" config DocumentRoot and Document to point to /var/www/live
[Code].....
Live works fine, but dev cannot connect (as if there is no server there).
View 2 Replies
View Related
Apr 17, 2010
I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
NameVirtualHost 97.158.234.76
<VirtualHost 97.158.234.76>
ServerName www.chaalu-kam.com
DocumentRoot /var/www/html/
[Code]....
View 1 Replies
View Related
Jul 1, 2009
I've created a virtual host and when I try to access it it displays the root of the Default Server. Running Fedora 11. This works fine in our Fedora 8, same configuration.
192.168.0.200
Default server is set to
Listen 80
virtual server
[Code]....
View 2 Replies
View Related
Nov 14, 2010
I created a new virtual host in Apache using Webmin and am having trouble getting it to work. When I created it, I opted to create the config file as a "New file under virtual servers directory /etc/apache2/sites-available". So now I have a default config file /etc/apache2/sites-available/default and a new one created by Webmin at /etc/apache2/sites-available/webmin.1412323.conf. It seems like the settings in that new Webmin config file aren't being picked up by Apache -- when I try and browse to mywebsite.com it shows my root /var/www folder, not the subdirectory /var/www/mywebsite.
Is there a way I can tell Apache to include the new Webmin config file for the virtual host or should I just copy the directives into the default file at /etc/apache2/sites-available/default? It seems like Webmin should automatically configure Apache to work with any newly generated config files.
View 4 Replies
View Related
Nov 8, 2010
In first place i am sorry about my horrible English. I want to make a web site with a virtual host of apache visible by all the computers connected to my networking. I put this in the end of the file "/etc/httpd/conf/httpd.conf"("192.168.1.194" is the IP address of my computer. The default gateway IP address is "192.168.1.1"):
[Code]...
It works if i go to "http://192.168.1.194/" with the browser of the computer with apache inside, but on the others PC of my networking this method don't work!
View 2 Replies
View Related
Jan 8, 2010
Is there anyway for one Virtual Server to access the main host, or another Virtual Server? Or would they be totally 100% independent?
View 5 Replies
View Related
Oct 5, 2009
On my server I have connected domain: www.my-first-domain.com which is installed in /var/www/first
For that domain I have installed virtual host.
Quote:
I dont know why, when I will put address my-first-domain.com instead of www.my-first-domain.com server redirect that domain to folder /var/www/.
View 8 Replies
View Related
Jan 22, 2010
I'm running Apache with mod ssl, with a php app using ssl. https://www.example1.com
I've made a virtual host to host a simple static site which I dont want SSL for.
When I try and get to the site it redirects me to [url] which gives a certifcate error and shows the site from example 1.
Config below:
View 2 Replies
View Related
Oct 29, 2009
I have 4 domains registered through godaddy. I have a dell poweredge box with one static IP hosted somewhere. I want the 4 domain to resolve to four different sites. I have already created 4 different sites in apache with four different aliases and has enabled it.
eg
alias /a /var/www/a
alias /b /var/www/b
alias /c /var/www/c
I want to acomplish.
www.a.com ==> xx.xx.xx.xx/a
www.b.com ==> xx.xx.xx.xx/b
www.c.com ==> xx.xx.xx.xx/c
I tried with godaddys forward with masking option. It works but I can't hide xx.xx.xx.xx/a in the links. Whats the best approach? One limitation is I cannot use the webhosts name servers. How do I set this up with name based virtual hosting? Do I setup a DNS server in the box?
I do have a dns host name for my box which is publicy accessible. Some my.ca.examplehost.net
View 3 Replies
View Related
Apr 28, 2009
I'm using Apache 2.2 to host multiple subdomains using a single SSL certificate (a wildcard certificate e.g. *.mydomain.com) and, yes, it works! Everything seems to be served correctly and the browsers are pretty happy.
And you can also have the non-SSL sites (virtual hosts on port 80) on the same IP. (That's covered elsewhere)
For those that want similar functionality here's my discovery...
My configuration is like this:
ssl.conf:
Code:
I would have to say that I don't believe that this will work if you are not using a wildcard SSL certificate and having anything other than subdomains under that wildcard.
It is somewhat limited in scenario where this is useful, but for a set of company websites that should be under SSL, this can be tremedously useful when you have a single IP.
View 2 Replies
View Related
Sep 10, 2009
I'm running XAMPP 1.7.2 on Ubuntu 8.10 (Linux dt19.im.local 2.6.27-14-generic #1 SMP Tue Aug 18 16:25:45 UTC 2009 i686 GNU/Linux) and am using the PHP 5.3.0 Apache module as standard. For one virtual host I'd like to use PHP 5.2.X as it is part of a project which has a lot of legacy code which is not compatible with PHP 5.3.0. The virtual host configuration block and the applicable directory directive are as follows -
Code:
Checking phpinfo() output on the above virtual host (or using the default virtual host directive and accessing it via http://localhost/[SNIP]/[SNIP]/phpinfo.php rather than [url] shows PHP 5.3.0 is running. After applying minor tweaks such as adding ScriptAlias or SetEnv options the problem persists. I've Googled for a good while and have checked the permissions and the like and tried the advice of other users (XAMPP or otherwise) either resulting in PHP 5.3.0 being used or a HTTP 400 bad request/invalid URI error. I've stuck with the configuration above as this is correct according to the PHP manual.
FYI cgi-bin/php-5.2.6 is a soft symbolic link to /opt/lampp/bin/php-5.2.6 (I've added the FollowSymLinks option to the cgi-bin directory directive in httpd.conf). I've tried installing php5-cgi from the Ubuntu repos and setting it up in a similar way, to no avail. I've also tried copying the executables into the cgi-bin directory, pointing the Action line directly to bin/php-5.2.6 and dropping the -c /opt/lampp/etc/php.ini-pre1.7.2 option in the Action line. I've even tried commenting out the LoadModule lines for PHP which results in a HTTP 400 bad request/invalid URI error. This demonstrates the fact that the PHP CGI use is being ignored.
I've checked httpd.conf and the extra/httpd-*.conf files and ensured all required includes are being loaded. I know that it's probably something stupid on my part which is causing this! Given that I've tried PHP CGI builds in the Ubuntu repos I don't think this is an XAMPP-specific issue.
View 1 Replies
View Related
Jan 19, 2010
One of our Apache servers, version 2.2.3, is running three virtual hosts on it. However, while two are accessible, gray.mgh.harvard.edu, www.plastimatch.org, the third, cmrol.mgh.harvard.edu cannot be reached by any remote host.
I am at a loss as to why this is occurring. To that end, I am including the httpd.conf file as an attachment in the hopes someone can see what I missed, and help correct this issue.
View 4 Replies
View Related
Jan 24, 2011
I've just installed LAMP. http://localhost/ page works fine. I need to create some virtual hosts. Localhost page is situated in /var/www/. It's normal for me, and I wanted to created virtualhost (in /var/www/vhost1) But it doesn't open in browser. Where is my mistake?
/etc/apache2/ports.conf
Code:
NameVirtualHost *:80
Listen 80
<IfModule mod_ssl.c>
# If you add NameVirtualHost *:443 here, you will also have to change
# the VirtualHost statement in /etc/apache2/sites-available/default-ssl
[Code]...
View 7 Replies
View Related
Feb 23, 2010
I'm trying to figure out why Apache is ignoring SSL Cipher statements when placed inside a Virtual Host. Specifically I'm trying to disable SSLv2 and only allow SSLv3 or TLSv1
In httpd-ssl.conf I have the following
Code:
And when I try and connect, I get the expected results.
Quote:
In my virtual host statement I have
Code:
The only difference between the two is the httpd-ssl.conf has -ALL in the CIPHER, and the virtual host entry has ALL. However if I try and change the ALL statement in the virtual host entry to -ALL I get the following error in my logs & get no content.
Quote:
Why it's not working in the virtual host statement? Unfortunately as many of you are probably aware it's impossible to gain PCI certification with SSLv2 enabled.
View 5 Replies
View Related
Jul 22, 2010
I am having two domains. for ex: www.example1.com and www.example2.com. These two domains need to be hosted under one ip. Yes by configuring name based virtual host we can do that. But, my question is my first domain(www.example1.com) need to be hosted by Apache web server, and my second domain(www.example2.com) need to be hosted by Tomact. Is it possible to configure name based virtual host for a scenario like this.
View 6 Replies
View Related
Aug 18, 2010
I was trying to setup SSL Client authentication on only one virtual host. Here is a brief excerpt sample of my conf file for the virtual host:
<VirtualHost xx.xx.xx.xx:443>
SSLRequire %{SSL_CLIENT_S_DN_O} eq "something"
SSLVerifyClient require
SSLVerifyDepth 2
</VirtualHost>
But when I try to check for syntax errors tells me SSLRequire not allowed here I do not want to add SSLRequire on the main httpd.conf because I only want it for one virtual host. The rest of the virtual hosts do not need it.
View 2 Replies
View Related
Nov 12, 2009
I'm trying to install two instances of OCS Inventory on the same machine using virtual hosts in apache. The apache configuration for it is in it's own file and it works fine without any virtual host. If I add it apache refuses to start without giving any error message. I narrowed it down to some lines loading perl modules, and if I comment them away apache will start again. Some of the modules work, but some of the ones specific to OCS Inventory will not work. I can't understand what the difference is between loading it in a virtual host or not, it doesn't make any sense to me!
View 2 Replies
View Related
Apr 17, 2010
I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
In addition to this, I have added this to my /etc/hosts file
Code:
I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too
View 10 Replies
View Related
Aug 31, 2010
How can I run LAMP (Linux, Apache, MySQL, PHP) in a virtual machine (Ubuntu in virtual box) and make it so the web server is accessible locally (and ONLY locally) on the host OS via an ip address?
View 3 Replies
View Related
Jun 3, 2009
Debian 5, apache 2.2 I've got Apache up and hosting multiple sites. Each site will have a php contact me page that will simply dump an email to a fixed address. What program should i be using to accomplish this? I've used nullmailer before but that assumes you have a fixed smarthost somewhere which I don't.
View 6 Replies
View Related
Jul 11, 2011
I'm working on a side project where I would like to install three ubuntu server systems,each with only one task.So server0 would be the apache server, server1 would be the database and server2 would be the file server.which key terms I should be researching?
View 9 Replies
View Related
Feb 22, 2011
I have a need to create a virtual directory in Apache for one of my company's internal websites. I have confirmed that I can create an alias for a local directory: Alias /vdir/ "/usr/share/somefolder/"
So I would get to this virtual directory by going to http://server.domain.com/vdir/. But when I attempt to point it to a shared folder on another server:
Alias /vdir/ "//servername/share/"
or
Alias /vdir/ "//servername/share/somefolder/"
Both return the 404 Not Found error, which I would expect if it is not connecting to the share. I've searched but can't seem to find the correct syntax and I know I am missing something basic. I have searched google and these forums but can't seem to locate the exact syntax. Are there other lines in the config file I need? Permissions should be no problem the shared is EVERYONE has access (for now).
View 7 Replies
View Related
Apr 19, 2011
Just set up a virtual host on a different port: 50085. accessing this port always returns me to 'It Works!' page.
The setup:
1. added 'Listen 50085' in ports.conf
2. added a <VirtualHost *:50085></VirtualHost> the content are the same with the site that works with a <VirtualHost *:80>
3. /etc/hosts contains the ip address and the servername
4. apache server has been configtest ok and restarted.
Anything I forgot to configure? How to troubleshoot --> I don't get any data on error log file.
View 1 Replies
View Related
Dec 22, 2009
How do I define the default virtual host to be served on port 80?
I have different configuration files in /etc/httpd/conf.d/ that look more or less like this:
Plus I have the namevirtualhost:80 in httpd.conf
For some reason if I connect to port 80 using the IP address or an alias not defined anywhere in apache config, the first domain configured (first alphabetically a-to-z) answers the call.
Is there any way to overwride this and set a default site?
Basically I'd like to answer with the right configuration if a precise site pre-configured is called on port 80, but if not I would like to redirect to a "default site"
View 5 Replies
View Related
Mar 31, 2011
I'm lost I can't get past the 403 forbidden errorI have a directory /home/russ/public_html with a single index.html file
HTML Code:
<html>
<body>
[code]...
View 3 Replies
View Related
