I did a fresh installation of centos 5.5. I installed KVM. And configured a eth1 for KVM host network and i configured eth0 to be bridged.
When i do service libvirtd reload i get: internal error Bridge generation exceeded max id 256
I just run Php5handler on suphp, but suddenly i got internal server error (everything ok when i running php5handler on dso) How to fix this problem?
View 1 Replies View RelatedI was searching for a doc on the exact steps to setup a bridge for use by my KVM setup. I needed my VMs to be bridge onto the eth0 network. Some docs I found on google seemed to be outdated.
[URL]
any one are implementing Transparent Cache in bridge mode. after googling i found article but its not working for me. any one have done this before ? [URL]
View 4 Replies View RelatedI have builded a svn server using apache before. But recently I can not check out from the svn server,and error code is as follows:
svn: Can't find a temporary directory: Internal error
I have searched in the google,they said no space on the server.But my server have much space.
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 49G 22G 24G 48% /
tmpfs 220M 0 220M 0% /dev/shm
/dev/sdb1 917G 867G 3.8G 100% /mnt/md0
/dev/hda1 151G 129G 15G 91% /mnt/meego
The server is at the /dev/hda1 partition.
I am new to CentOS and need this urgent help.
On my machine, I am not able to login using any of the user account or root. It's showing this message:
Then comes another message:
YOur session lasted for less than 10 seconds. Try logging using Failsfe.
....
session_child_run: Could not exec /etc/X11/xinit/Xsession default
I tried to use the failsafe as well, but nothing seems to work.
Would someone please help me regarding this issue?
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
I'm trying to copy a 7.8GB tar.gz file to an external hard drive via command line. It gets to an even 4GB and stops, and gives an error that says "file size limit exceeded." I edited some file at /etc/security/limits.conf to look like: "root hard fsize 10024000" but that didn't do anything at all. Yes, I am copying this as root.
View 9 Replies View RelatedI downloaded pdftk 1.41 fromand installed on Red Hat Enterprise Linux 4, 32 bitI am primarily using this utility to uncompress pdf files to remove the 'Flate' compressionIt works good with small pdfsHowever, when i use to uncompress pdf files of size 35MB or more, the uncompressed output file grows up to 2GB and then the uncompression fails with error:"File size limit exceeded"I can concatenate two files with output file size upto 3GB in size, so 2GB is not the limitation at the linux level
View 1 Replies View RelatedI installed debian 7 and apache 2.2 with virtualhosts. I'd like to run CGI, but always get internal server error. i tested it with a simple test.cgi file.I got this in apache error log.Wed Sep 30 21:39:02 2015] [error] [client 192.168.0.156] Premature end of script headers: test.cgi
When is switch off "Addhandler cgi-script .cgi" in the config file i see the code. Permissions are 755 on the whole directory. I have checked a2enmod, the modul is loaded (sudo a2enmod cgi)..here are the part of config files :
ScriptAlias /gestioip "/var/www/gestioip"
<Directory "/var/www/gestioip">
AddHandler cgi-script .cgi
AddDefaultCharset utf8
[code]...
I'd like to have anything that tries to send mail locally on my machine (including crontab reports for instance) to be handled by my ISP's smtp server instead of my machine acting like it's own SMTP server. I've spent around 15 hours trying to figure out how to do this and I keep either getting into things that I don't understand, or hitting brick walls (for instance, I found nullmailer, but after installing it, it seemed like it would only work on Unix) Is there an application like nullmailer which I can use as my MTA to forward all internal mail to a different SMTP?
View 3 Replies View Relatedi'm facing an error 500 internal error and i don't know where to start .... How can i get information about the error in order to fix it ???at /var/log/apache2/error.log i can't find anythingi have virtualmin installed , i searched at/var/log/virtualmin/domainname_error_log but nothing .... where is apache supposed to keep log for 500 errors ?
View 1 Replies View RelatedMy httpd error_log says the following error while running the htpasswd.pl
[Thu Jun 24 08:25:54 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jun 24 08:25:54 2010] [notice] Digest: generating secret for digest authentication ...
[Thu Jun 24 08:25:54 2010] [notice] Digest: done
[Thu Jun 24 08:25:54 2010] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations
[Thu Jun 24 08:26:01 2010] [error] [client 117.204.119.181] (2)No such file or directory: exec of '/var/www/cgi-bin/htpasswd.pl' failed
[Thu Jun 24 08:26:01 2010] [error] [client 117.204.119.181] Premature end of script headers: htpasswd.pl
Also the apache shows this error in the webpage. Internal Server Error. The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log.
Apache/2.2.3 (CentOS) Server at 59.93.43.183 Port 8284
I am using the htpasswd.pl script dwoloaded from net. I can run the perl file using the command line and gets the sytax OK message. The contents of te htpasswd file is as follows:
#! /usr/local/bin/perl -T
# htpasswd.cgi by David Efflandt (efflandt@xnet.com) 8/97
# Last update 10/4/99
# Update password file from the web for use with user authentication.
# Stores each line in the format: username:crypted_password .....
I installed Diskquota on CentOS 5.1 machine. I enabled quota for some user with 1 GB as both hard and soft limits, Grace period is 0. Every this is working fine if we work from normal user's login say (user1 who is a system user). If he exceeds 1GB its will restrict that saying quota exceeded. But, If root user copies some 500MB files into his workspace, and change the ownership of those files using following command
chown user1.user1 * ( * is 500 MB files).
Then quota is exceeded and it is showed using:
repquota /home
user1 +- 2039960 997020 997020 none 298 0 0
Here its showing as some 2GB.
Soft limit is 951 MB.
So, my problem is restrict quota from all possible ways, i.e., even if root does some copying and change permissions, it must tell that disc quota exceeded.
i am forwarding HTTP request to a internal server, it is quiet successful but access logs donot show the ip of the external m/c. Rather it shows the ip of the machine on which i have enabled port forwarding.
View 2 Replies View RelatedI have a white slate centos 5.5 installation on a virtual box at Media Temple (one of their new VE servers). I am trying to create a development environment where I can have Bind9 serve up one set of zone files to me and other developers on the internal network and another set of zone files to external requests (ie... using the views feature). I would like to be able to develop for sites for which the dns is not yet pointed at my server. The network is created by having the VE server be an OpenVPN server, and connecting my client box to the server (my mac - 10.8.0.6 / my ve server 10.8.0.1).
I have the connections working fine, I have also been able to route all network traffic from my mac through the vpn to the server. For some reason, I cannot get the DNS server on the ve server to serve me an internal view zone file. When my vpn is on, I cannot ping or navigate to any web pages from my mac. I think this is because my ve server is not setup as a dhcp server and the ip tables are not setup to allow all internal requests to use the server to go get web pages.
I cannot view-ping anything else from my mac/client when on the vpn, I can successfully ping any website my ve is authoritative for. This tells me that my ping is obviously going over the vpn, and thus an internal request, but the external zone file is still served up. The following is my named config.
acl "lan_hosts" {
10.8.0.0/24;
127.0.0.1;
};
[code]....
I want write a 2-way chat application in the my website, and i have to use the juggernaut plugin. but a recieved an error that " internal server error"
View 1 Replies View RelatedWe're having an issue with HTTP POST file uploads on our two Ubuntu PCs. For some reason, whenever one of our users attempts to submit a file in an HTML form, the request times out, usually with a 500 Internal Server Error message. This problem is not limited to one site, but occurs on all sites that use file uploads. Also, the problem does not appear to be with our network, as a Windows 7 PC on the same network can upload files to the same sites without any difficulties. The problem is not browser-specific; we have tested with Firefox, Epiphany, and Google Chrome and all produce the same results. The issue is relatively new, and was first observed within the last month; before this time, both machines had no problems uploading files.
Does anyone have ANY idea what could be causing this? I've tried a number of things, including rebooting the PCs, rebooting the network, disabling IPv6, etc. I'm not very experienced in Linux system administration, but I can use the terminal and am familiar with some terminal-based diagnostic tools, so if you need any additional info or want me to try something, please let me know! I've exhausted my own computer knowledge with regards to finding a solution to this problem.
I have a Centos 5.2 VM running under Windows 2008 Hyper-V. If I add two "legacy Nic's" and bridge them, everything appears to work fine. However, if I remove the legacy nics and replace them with two synthetic nics (linux integration components), the nics seems to function fine UNTIL I add them to a bridge.This VM will eventually be used as a DansGuardian/Squid transparent proxy for a local library. The logical layout is represented by the attached jpg image. I have also included the ifcfg- scripts for the adapters and bridge for both scenarios.It would also be useful if someone else has Hyper-V with the integration components and dual physical nics to see if they can reproduce my symptoms on their box.Legacy Adapters:
ifcfg-br0:
DEVICE=br0
BOOTPROTO=dhcp
[code]....
I have a problem with compiling of mod_ruby-1.3.0 After a succesfull configure i get a error in the make, it say "make: *** [apachelib.o] error 1" . Here below you can find the results of de configuring and the make.I was following the roles in Howtoforge " The perfect server - Centos 5.3" everything goes perfect till mod_ruby-1.3.0
./configure.rb --with-apr-includes=/usr/include/apr-1
checking for a BSD compatible install... /usr/bin/install -c
checking whether we are using gcc... yes
[code]....
Fedora 11 I have tried just about everything in webmin, the current one I am working with is openswan, and I get this error: ipsec newhostkey --configdir /etc/ipsec.d --output /etc/ipsec.secrets ipsec rsasigkey: key pair generation failed: "-8037"
My boss would like to have our employees connect to our linux server, then access their personal computers to work when they are unable to be in the office. Everyone else in the office uses winblows and they are unwilling to try anything else no matter what the benefit. The most important one is the CAD guy, we need him to work on drawings from school or his latest flings house and I am just running out of steam. how to fix this error or radically change my approach, I will try or do anything.
Today I upgraded my 10.10 to 11.04. Since the last step of upgrading, when it was restarted, I get stucked in consola where it is checking, and there is written fail at stopping automatic crash report generation. How can I repair it. I tried to do
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo reboot
but it doesn't do it properly.
I want to set up a bridge using bridge-utils within /etc/network/interfaces like is shown here in this guide: [URL] The problem is that, at the same time, I want eth0 to have a specific static IP address. Right now I have a configuration for eth0. This guide tells me that I should not configure eth0 outside of the br0 configuration.
View 3 Replies View RelatedI am setting a Lucid mail server, and got dspam and mailgraph installed. dspam requires suexec module for apache, but it breaks mailgraph with "500 Internal Server Error":
[Code].....
I installed Xen package on a CentOS 5.3 x86_64. After a reboot I found the virbr0 bridge configured by default. I guess that "virbr0" is the name used conventionally by Red Hat to indicate the first bridge. In other Xen installations usually it would have named "xenbr0". I did not find in which configuration or script file it was created. How is it possible to remove that "virbr0" bridge?
View 2 Replies View RelatedI am installing a cluster which is hidden from the rest of the world and there is no router either froma general login node. I would therefore require a local repository of the updates to CentOS5.4. When I checked I only found instructions for a full mirror. As I have no room and neither the human resources to setup and maintain a full-blown mirror, this is not a solution. However if I try to find updates for 5.4 to download in a repository-type of way I fail to find a solution. Maybe I am just not looking in the right places.
View 1 Replies View Relatedi am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
That the Linux bridge configuration does not work afer I upgraded the kernel to 2.6.33.2. Why I can't find the device vmbr0?
[Code]...