Slackware :: Wireless Radio Not Turning On?
Nov 24, 2009
I have slackware 13.0 installed on a dell latitude laptop. I am trying to get the wireless radio to turn on. But when I press the fn + f2 nothing happens( is anything suppose to happen) I tried to edit the rc.inet1.conf file to match my network settings, and then restarted it still nothing. Maybe someone could shed some light my way. I will keep reading through forums to see if I find answer. I also installed the wicd package from the slackware cd, it starts up but shows no networks. Guess the fact that my wireless radio isn't started, that is why I don't see any networks.
View 8 Replies
ADVERTISEMENT
Apr 27, 2010
I have actually done a bit of searching on this, but the suggested solutions either don't work or are not applicable to my setup.First, I changed the setterm link in /etc/rc.d/rc.M to be setterm -blank 0 -powersave off -powerdown 0and have xset s off in my fluxbox startup file.Nevertheless, the screen goes blank after 10 minutes. I can't figure out what is causing it and how to stop it.
View 12 Replies
View Related
Jun 19, 2010
I have a ThinkPad T60 with the AR5008 chipset. I am using a Madwifi driver that I complied from source (this is a fixed driver related to a bug report on this chipset). My Thinkpad has a hardware switch on the front.My problem is that the wireless works whether or not the radio switch is in the on position.I have not been able to figure out how to make the wifi radio turn on and off with the switch.Note that the bluetooth does respect the switch.
View 4 Replies
View Related
May 1, 2010
i updated to lucid lynx from karmic (i could not get wireless to work on that either) with the hope that wireless might actually work but it doesn't, the keys to turn wifi on don't even work with lucid there is no way to get the wireless to even give me a light that says its on. I have tried installing the rt3090-dkms package and it installed fine (took ages) however that has done nothing at all. It is kind of pointless having a netbook without wireless so anyone got any ideas this is getting very annoying I have yet to use wifi since i bought the netbook
View 8 Replies
View Related
May 25, 2011
i am wanting to turn my Debian box into a wireless AP, but for some unknown reason the wireless card won't switch into master mode when i run the command #iwconfig wlan1 mode master i get this Error for wireless request "Set Mode" (8B06): SET failed on device wlan1 ; Invalid argument. what does this mean and what do i need to configure/install to get it to work my wirless card is supported i checked it's a zydas chipset using the zd1211rw driver SMC EZ Connect SMCWUSB-G [URL]
View 14 Replies
View Related
Sep 8, 2010
I am in a situation at the moment which means I am going to be without an ISp for a week or two, and I can't survive that long without the intenet!!! What's more, I have 8 computers that need to connect, though not necessarily at the same time, but certainly more than one at a time. Anyway, I came up with an idea to buy a Mobile Broadband Dongle, and then share the connection via my PC. Problem is, I don't know how I would go about setting my PC to be a Wireless Access Point/makeshift Wireless Router, and sharing the connection.
View 9 Replies
View Related
May 1, 2011
I have a Hewlett-Packard HP Pavilion dv6000. I had no issues before the upgrade, but after, my wireless driver refuses to turn on the wireless at all. I've seen in most of the posts, people can see the wireless networks but not access them. I can't even get my little orange wireless (off) light to turn blue (on). The "additional drivers" option in "administration" was a bust and I've tried reinstalling the kernel from my original disk iso.
Here is my wireless info:
Code:
03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
I currently have the STA broadcom driver enabled and all I can do is use a cable for internet right now.
View 2 Replies
View Related
Jun 30, 2011
I am wondering if any in the Ubuntu community owns a Carmen Car Radio player by Livio Radio. The program to save internet radio to the device is written in Java, however I am not able to run it either using WINE or using Open JDK.
The Carmen Player does work well with Banshee, it is the internet radio that is not working.
View 1 Replies
View Related
Jan 2, 2010
I have a netbook (Acer Aspire One) I'm running Slackware 13. and usually, I prefer to connect an external monitor. When I switch my machine on with the monitor connected, the display is duplicated on both screens and since I just want the netbook's screen to be off and only see the display on the external monitor, I can doxrandr --output LVDS --off
Great! However, it's a hassle to do this every time I log in and I'd like to automate the process if possible. I did some googling and I found that if you want to automate xrandr commands, you can put a script in /etc/X11/Xsession.d/ (see this). I wrote the following script to automate my xrandr commands and since the Xsession.d directory didn't exist, I tried creating it. The script was called 45custom-xrandr_settings, as the one on the RandR wiki is called the same.
Code:
#!/bin/bash
# Check whether the external monitor is connected
[code]...
View 5 Replies
View Related
May 1, 2010
I have a new install of Karmic on my system with a flyvideo 3000 tv card installed. My problem is that it doesn't find any radio channels and the input channel is completely wrong. I don't have any sound on gnomeradio and can't find the config files to change the input channel. The only input option available to me is dig1 - can anyone point me in the right direction?
I have already read the Howto for this tv card and changed the device to radio0 in the setup. I have setup tvtime perfectly with sound channel as well as with a 5.1 surround configuration. I am missing my favourite radio channel. and I want to get rid of my windows installations once and for all! Update: I did a system update and some things have changed: the radio tower graphic on gnomeradio is now green (I assume it is getting a signal) but no sound yet.
View 2 Replies
View Related
Jun 24, 2011
I'm using an hp pavilion dv2000. i turned the wifi switch off by mistake, the LED turned orange and the wifi got disconnected. and now when i turn the switch on, it remains orange and the wifi still isn't functional. this happened before; i found a fix that worked searching google. it was done via terminal commands and i didn't have to download anything but i can't find the solution anymore!
wlan0 shows up when i use:
more results:
It's still hard blocked! even though the switch is turned on; gives the same result eitherways
View 1 Replies
View Related
May 25, 2010
I have Ubuntu 10.04 installed on a laptop of mine, and also a desktop. On this laptop, it's a clean install and I'm having a weird issue with the panel on the top of thescreen.ometimes when I start up the computer and login, I get two noticeable quirks. Instead of having the wireless icon in the tray next to the volume, I have two volume controls next to each other.The one icon, that takes place of the wireless icon, is not functional.The other volume icon functions as normal.
The other quirk is that my power button, used for choosing to logout, shutdown,etc,isappears. Instead, it shows two of my username next to each other (one is the legitimate one that lets you set your away status and such). And in place of the power button, is another username menu, but it is cut off by the edge of the screen and doesn't function.Has anybody had this problem before? Is there some kind of package I can update or reinstall to try fixing this? Sometimes the power button will be fine, but the volume icon will still double up.
View 4 Replies
View Related
Dec 8, 2010
record my radio show from a radio I have plugged into my iMac. That's right. For now, I am dual booting on my iMac until I can afford to buy a dedicated PC desktop just for Ubuntu.
I can't believe that there seems to be no way for me to record my shows from my radio. Works fine when I boot into the Mac side and even when I use Ubuntu using VMware Fusion. When I boot into Ubuntu directly, Audio In in the Sound preferences doesn't seem to work. No audio coming through when I try to record from the radio.
View 2 Replies
View Related
Jan 24, 2011
I have an Asus Eee PC with Ubuntu Netbook Remix (Unity). The other day, I turned off the wireless using the keyboard shortcut to save battery life when I was somewhere without wireless, but now it's not turning back on. I tried restarting, I've done the keyboard shortcut several times, and it still just says "disconnected" for wireless and wired, even though there are several wireless networks around me right now. There aren't any options in Network Connections or Network Tools to turn on the wireless. Is there a way to manually turn it back on?
View 2 Replies
View Related
Jun 18, 2011
I have just installed Ubuntu 11.04 in my acer aspire 4710z laptop. After logging in, I am not able to turn on Wireless Radio, hence not able to connect to my wireless router.
arindam@arindam-ubuntu:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]...
View 2 Replies
View Related
Aug 22, 2010
I recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
View 4 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Jun 5, 2010
I do have trouble in configuring my wireless network,though i configured it as what Alien BOB say(http://alien.slackbook.org/dokuwiki/...ckware:network) and google some similar Threads.My latop is Asus F83vf, wireless card is Atheros AR9285 Wireless Network Adapter.
The code when I run lspci command is code...
View 11 Replies
View Related
Nov 30, 2009
I yesterday installed Slackware and I am quite impressed. I have been using Ubuntu for a year and decided to move on. My wireless worked fine in Ubuntu but it seems that it needs some configuration for Slackware.Note that my home network WiFi has no password or whatever. I still can't find any networks with my wireless even after the configuration. I fire up wpa_gui and it can't spot anything..
View 12 Replies
View Related
Feb 26, 2010
I'm able to configure my Wireless network to connect with an AP with WEP key but...
Now I'm at home, I've a WPA2 key (my router now is supporting both, WPA and WPA2). I used WICD to connect but no success at all! It just stops with "Connection failed: Could not contact the wireless access point"
if I type IWLIST key:
Code:
ra0 2 key sizes: 40, 104bits
4 keys available
[1]: off
[2]: off
[3]: off
[4]: off
code....
View 15 Replies
View Related
Jan 2, 2011
I have posted questions on several Linux forums that asked how I could turn off the touchpad on my new EEE-900A netbook. There is a backstory that is not that relevant, but in a nutshell, I got this tiny low-power computer to be my voice since my speech is impaired. Only the latest Debian has the tools I needed.
After much searching, suggested that I remove the touchpad driver; the command as root: # rmmod psmouse
Did the trick. On the 900A, the protocol that handles the touchpad is the PS/2. Removing the psmouse driver module does not affect my USB mouse, so now I can use my USB mouse and type away with my left hand and bumping into the touchpad doesn't screw things up. In other words: Success. (I am being as explicit as possible so that all search engines will find this.
View 1 Replies
View Related
Jun 8, 2010
I want to install ATLAS on my laptop to do this i have to turn of cpu throttling.
View 4 Replies
View Related
Jul 24, 2010
Should I turn ON compiz with 512 RAM on mine AAO or do in need more RAM?
View 1 Replies
View Related
Dec 2, 2010
Having just successfully installed fallout 3 (yippee), one question arises.
Is it possible to turn off (and eventually back on) all superfluous process during gaming ? As an ex-win xp user, there was an app called "game booster", i think, that did this.
The process i have in mind are things like fancy compiz settings, dockbar X, and any upgrades that might be taking place in the background.
Again, it is important that i can restart these functions after kicking super-mutant ***.
View 1 Replies
View Related
May 5, 2011
I just did a clean install of Ubuntu 11.04 on my PC. Installation went smoothly, and I can boot it and log in.
If i leave it there running, nothing happens, but as soon as i try to run an application (Firefox, Update Manager, etc), the screen turns off and I can't do anything else anymore except reboot.
I was able to apply the latest updates using apt-get update from the terminal (one of the very few apps that doesn't turn the screen off), but can't get rid of the problem, what can i do?
My PC is a Intel Core i5 PC with a Nvidia Gefore 210 graphics card.
I was able to install the proprietary drivers for Nvidea, no change. Both Unity and "Ubuntu Classic" have this issue
View 1 Replies
View Related
Jul 6, 2015
I have an Aspire One ZG5, Stretch/Sid, fully updated.In modprobe.d I have acerhdf.conf with:
Code: Select alloptions acerhdf kernelmode=1 interval=10 fanon=65000 fanoff=60000
When the temp reaches 65c the fan comes on, but never shuts off. The fan does cool the cpu.If remove the module, and then modprobe it, the fan stops until the cpu reaches 65c.how to get the fan to shut off properly?
View 6 Replies
View Related
Feb 27, 2009
I downloaded the *.iso for a Fedora 10 Live KDE installation. It is currently on my hard drive. I tried burning it to a CD with Roxio using two different methods. The first one was not a bootable method. So I checked the Roxio documentation and burned the image that way. In burning an *.iso to a bootable image on a disc, Roxio asks for three different file types, none of which are *.iso. I selected my *.iso because that was all I had. Then I burned it as a bootable to a CD.
When I tried to boot it, I got a black screen with a message at the top left reading something like there was no operating system available. I thought that was strange, and I do not know what to do.
View 8 Replies
View Related
Jan 11, 2011
I am looking to turn off Plasma Workspace and keep it off! Today I was informed by a family member that their desktop had drastically changed. After investigating this, I had noticed that they were now running what was called Plasma Workspace. I am truly baffled right now as to how this was activated/turned on for only 1 out of 5 users on my computer. None of them are computer savvy, so it would also help me out considerably if I knew how this was turned on without the use of the terminal.
View 4 Replies
View Related
Jun 17, 2011
I searched and only got the screen program, and the drop down menu only shows options from 1 min to 1 hour.
View 6 Replies
View Related
Jun 17, 2011
I have openSUSE 11.3, KDE 4.4.4. In Power Management,I have everything set to "do nothing." Under "Screen Saver" I have everything unclicked. Yet, after a while my screen STILL turns off!
View 7 Replies
View Related
