I want to watch some live streaming TV channels on my laptop which has slackware installed.
For instance, I try this page: >click<
But I get this error:
The Totem Plugin could not be started. Failed to create a GStreamer play object. Please check your GStreamer installation.
Slackware is fully updated.
EDIT: I have also installed the latest version of GStreamer from source, and 3 plugins.
Get_iplayer worked very well for me under opensuse 11.2. After installing opensuse 11.3 it continued to work very well with the exception of STREAMING live BBC channels. These do not work at all. It seems the "modes" I am and have been using are not recognised. I use gnome and installed codecs using codecs_gnome.ymp for suse 11.3. I have no problem with any of the multimedia applications I use.
View 4 Replies View RelatedThere is a live internet streaming cast that runs on Friday's. I can't watch it using firefox. so I have to reboot into windows, use ie to view it. I want to be able to view it while using firefox via ubuntu.
View 9 Replies View RelatedI'm trying to watch live streaming video on a Slackware box I have connected to a television. I can get Flash to play, but that's almost always pre-recorded (and I'm trying to watch live sports.) The site I go to (which works on Windows) is [URL]. They provide streams that they collect somehow, but they're in different formats. (Some are in Windows Media, some are in Real, some are in quicktime, etc.) I'm using Firefox as a browser, but I could use something else. Beyond the default Slackware (13.0) installation, what additional software do I need?
View 3 Replies View Relatedi have a skystar 2.6d card.i set everything in Kaffeine and when i search the channels it finds some but when i click on the channel to watch it nothing appears.even in properties of selected channel the frequency is showed up something else. For example the freq of channel Y is 12345 but in the properties of the channel it shows 57329 without any video pid and audio pid.
View 2 Replies View RelatedHow can I watch streaming XviD movies on Ubuntu? Whenever I go to a page with an XviD, all that happens is the little "Buffering" wheel in the corner starts spinning but never plays, and when I click on the "Download and install the XviD Codec" in the middle screen, an error message pops up saying "We're sorry, our content is not compatible with your computer configuration."
View 4 Replies View RelatedGuetting radio streams to work in ubuntu stand alone players wasnt so difficult after all: I just had too see the page source and locate the streaming address. That way I added some radios I was interested to rhythmbox. I also found websites that list lots of streaming addresses for Europe, Japan.TV seems to be different: so far I havent been able to do the same: Ideally, I could search for a streaming tv address in the source of the page with the embedded player, but no luck at all.
Im not talking about tv via a tvturner card, just tv streamings, like the BBC or this german one URL... type=null. The public german broadcaster allows me to watch their programms in their embedded player. Can I watch those programms in vlc or in other standalone players? Im also interested in the same for the bbc, cnn, aljazeera...
I love Ubuntu so much but when my previous graphic card passed away a technicien installed on my desktop an Ati Radeon 9550, my question is what I have to do to watch smooth videos in streaming?
View 9 Replies View RelatedI've installed RPMforge and Smart Package Manager.
I had to create my own Centos 5.5 channels to sync yum repos and smart channels.
Here's the Centos 5.5 channel file for Smart:
Just shut Smart PM down, copy this file into /etc/smart/channels, and restart smart.
Smart should then detect the new channels (repos) for Centos 5.5
Update your channels in Smart, and you should then have yum repos and smart channels both in sync, looking at the same set of packages.
Copy this to CentOS-Base.channel, and add it to the /etc/smart/channels directory.
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
[Code].....
Has anyone managed to get the moonlight extension which enables one to watch Sky TV working in slackware? I have the extensions for firefox and chrome but all I get is a blank screen.
View 5 Replies View RelatedI want to set up a live audio stream from a ham radio to a page I will create on the Internet. Should I use the sever edition? What program should I learn about to do the streaming? The live stream will be morse code audio.
View 1 Replies View RelatedI'm building a cheap htpc for my garage so I can watch the news, listen to music and browse a few car forums when needed. Here are the specs I am looking at:
2 512mb ddr2 800
AMD Athlon II X2 240 Regor 2.8GHz 2 x 1MB L2 Cache Socket AM3 65W
500GB sata2 or 32gb ssd drive
Will Ubuntu be able to use a ssd? If so this box can pull movies in from my server. Which distro will play movies, watch live tv, and play music the best on the specs I provided?
I've running Squeeze 64bit and most multimedia is working. but when I try to get live streaming stations to play in Streamtuner, Rhythmbox, or Exaile, nothing comes in. What is needed to allow radio streams to play?
View 2 Replies View RelatedI'm not sure this is, strictly speaking, an Ubuntu problem (although it may be), but people around here seem to be more knowledgeable than they are anywhere else, so it's worth a try.
CNN recently started offering its news station on live streaming video for those who get CNN from a participating cable provider. For better or worse, I get CNN on Comcast, so no problem there.
Except for lagging video because lack of processing speed, it all works fine on my netbook, on which I have Ubuntu 10.04 installed.
But on my desktop, where I'm using Ubuntu 11.04, no such luck. The problem is the same regardless of whether I'm using Opera, Firefox or Chrome.
I can go to http://cnn.com/video and get the standard video streams (not CNN live) just fine. When I click on the "Live" button and then the "Unlock Live TV" button, I get, as expected, the "Sign in to watch live TV" dialogue box. So I click on Comcast, log in correctly, and am returned to the main screen. The page appears to be loading correctly, and then I get the "Sign in to watch live TV" dialogue box again. No matter how many times I try, that's what I keep on getting.
If this didn't work on my netbook, I'd just assume that for some reason the setup is Linux-unfriendly, but now I'm determined to get this working.
I've checked my plugin settings on my browsers and nothing seems amiss. I've tried deleting all cookies, persistent storage, Flash cookies and all such things, but to no avail. Even though I had the most recent version, I even uninstalled and reinstalled Flash, but that didn't change anything.
For the server, I have a VPS runing CentOS, and for in the studio we have several PC`s runing Windows (XP/Vista/7).I want to create the streaming server on my CentOS VPS, and stream live video from a webcam connected to a Windows running PC in the studio, and stream it over our website using a flash player. What software should I use? (looking for something free, like shoutcast is for audio) I`ve found a lot of tutorials on the web but most of them are either for streaming from a linux based PC, or streaming for windows media player and real format.
View 2 Replies View RelatedIs there any way to record/capture live streaming video/audio from a website?
Code:
www.ww.com
I think the file will be .swf something to do with Flash and Macromedia
i have tried all kinds of downloader to no available.Thanks for your help....
The intent is to use Mplayer without X or any other window manager/GUI to watch movies on TV. A simple 'mplayer movie.avi' command works fine, except that it locks out the keyboard and mouse. We're using the latest mplayer and slack 13.0 with the 2.6.29.6 kernel. Using mplayer under X presents no problems, but the use of anything but the console is NOT possible now. The whole problem is figuring out what to do to regain control of the keyboard.
View 2 Replies View Relatedi dont know if this is the right forum for this questions, but here we go.. im trying to do with mpd, a network of 3 pcs who shares a unique sound card. and the 3 pcs have a diferent collection of music and share with the others pcs, its clear?? je......
i make some experiments, and works partially....but not in the way that i like...
I successfully installed darwin streaming server .. I stream Audio through internet well but videos I can stream locally in my network only .. when I am connected to internet outside my network .. it doesn't stream I think their must be ports opened for that .. or any 1 have any ideas .. the audio is streamed on port 8000 .. video is streamed on port 7070 but locally only .. I opened those 2 ports in my router only the audio is working .. also I opened ports 554,7170 disabled the firewall of the router .. is it a problem of ports or something else .
View 2 Replies View RelatedI was trying to plug projector on my laptop with slackware 13.1 installed. The problem is that the projector stops showing whenever I start X. I can see everything starting from LILO loader, but whenever I type "startx" - bam, no signal or just a black screen on the wall. I try to switch to console mode with ctrl+alt+f1 - the view appears, switching back to X with ctrl+alt+f7 - view disappears. I am using awesome WM. I tried XFCE, but the result was the same. I also tried to change resolution to
Code:
xrandr --output default --mode 1024x768 / 800x600
, but again, no difference. My laptop is ASUS F3Jc. Fn keys doesn't help as well.
Using Slackware 12.2 Also using live CDs Slax 6.1.1 and knoppix 6
Is there a program I can use to send a fax from my computer with Slackware or any of these live CDs?
Is there any special hardware that I would need?
when i stick in my live usb and turn my laptop on it freezes instantly, cant get past the laptop logo screen used "Universal USB Installer" to create the bootable usb changed to boot usb hdd first also.
View 2 Replies View RelatedI have an older compaq laptop (P4). I just wanted to be able to boot a live cd. The trouble is the only live cd I can get to boot is SUSE 9.2 and it ends up having a scripting error. It is an old disk so it is probably shot.
I have tried to get fedora 14 to boot, but it will not. A newer computer I have will boot from the FC14.
why I cannot get the live CD's to boot?
1. Unable to install F 13 on my laptop using the fedora live usb i had. It worked from the Live CD though, but the 3d effects don't work.
2. Does F 14 have native support for NVIDIA 5100m card? This is the card present on my laptop its based of the Quadro 880 chip
I meddled a bit with the PAE kernel and tried to install the driver off the nvidia website and now the system does even boot..
A few weeks ago I installed Fedora Linux 64-bit on my HP dv4-1428ca laptop which was running Windows 7. At that time I created a Live USB using the fedora-live usb tool and it booted fine. A couple days ago I decided to try out openSUSE, so I downloaded the 64-bit live-cd image and tried to create a live usb using the SUSEStudio ImageWrite provided in the documentation. The tool kept giving me an error message, so I decided to try unetbootin instead. However, when I tried to boot the live usb on my HP laptop, it presented me with the message.
"SYSLINUX 4.04 EDD 2011-04-18 COPYRIGHT (C) 1994-2011 H. PETER ANVIN ET AL" with a blinking cursor and nothing else. I've tried a variety of alternative programs for creating live USB's (pendrivelinux, linux live usb creator, unebootin), and verified the checksum of the iso file for openSUSE 11.4 64-bit, and still was not able to get past the "SYSLINUX..." message on my HP laptop. However, the live USB does boot on the other computers in my house. Interestingly, if I create a live USB using the tool provided by Fedora, it will boot fine. However the Fedora Live USB tool cannot be used for other distros.
Specs:
AMD Turion X2 Dual Core
4GB Ram
ATI Radeon 3200 Graphics
320 GB Hard Drive
That is what I do to connect to Xbox Live and I just got an Insignia Blu-ray player that can only connect to BD-Live through an Ethernet connection, so I was wondering if I could apply that same concept to my Blu-ray player.
View 1 Replies View Relatedim not sure if this is normal or not, i never tried a beta before, always wait until normal release. this is the 5 version of ubuntu that i will use with this laptop. 8.04 some hardware was not detected, screen and graphics not good and i had to use windows driver for wireless 8.10 the wireless improved, used backported drivers instead of windows drivers 9.04 wireless working, all hardware detected 9.10 screen and graphics working good, match lcd resolution 10.04 the live cd stop in the middle at the logo screen with dots, never one live cd fail to load, but again, never tried a beta before. stay with 9.1 or try another distro? the bad thing is i dont know how i can to fix it, or get more information useful to anyone
View 4 Replies View RelatedI'm install it onto my laptop (its about 4 years old - a Sony Vaio VGN FS315E).
I have been given a live disk of the latest edition of ubuntu (10.4?) by someone at work, but my CD drive on my laptop seems to think the disk is blank. I know this is not the case as when the disk is inserted into a different laptop is it recognised as an ubuntu installation disk.
My aim to boot ubuntu from the disk to get a feel for what it's like before installing it fully on my laptop, and also to check that it would work on said laptop.
My sister has this old laptop, it's a Sahara NB610-LE1D, that she wants to use as a karaoke/music machine. Being an avid Ubuntu user for about 2 years now, I recommended an Ubuntu installation with Rhythmbox. Fantastic, she said - you install it and show me how to use it.
I downloaded an iso of version 10.10, burned it and tried to boot up the laptop with it (there is a beta version of Windows 7 on it at the moment that's expired, it's really not usable.)
It gets past the boot-up sound, and the new maverick wallpaper loads, and then it just sits there, with the mouse pointer changing between the pointer and the little circle busy ball. I've left it for a few hours yesterday and nothing else happened. I've done a memory test, and a disk test, both of which are fine.I'm about to throw this machine out of the window.
Fed up with Windows and ready to become a Linux convert. Here's the only problem:
I've created no less than four separate Live USB distros - all using different USB sticks -
yet my HP Pavilion dv7 refuses to recognize any of them as "bootable devices."
1) Have formatted USB sticks in FAT16 & FAT32 - neither made a difference.
2) Have created bootable USB sticks using Ubuntu Minimal Live install; Ubuntu full Live install; PuppyLinux Live install; even a simple gparted live install - none will boot.
3) Have checked & re-checked that BIOS is set to boot first from USB drive device.
4) 2 of the 4 USB sticks are new, fresh out of the packaging; and 3 of the 4 USB sticks are each from different manufacturers - so I'm fairly certain it's not a issue of a particular brand being incompatible, nor is it due to the sticks being corrupted somehow.
5) Each of the 4 live distros appears to have downloaded just fine - all necessary files appear to be in order.
6) Have tried using Unetbootin, Ubuntu's own live usb tool, and 1 or 2 others - all have failed to boot my HP laptop.
7) Have even tried removing all non-essential hardware before booting - even booting with no hard drives installed - system still returns the error "no bootable device detected."
This laptop is only 2 years old; I know it should be able to boot from USB. I can boot from a (rather old) SliTaz distro on CD just fine - but I need a persistent USB stick so I can easily add packages as needed, etc...s.