I switched a working Lucid KVM guest from linux-server to linux-virtual and it could not mount root at boot time and issued a panic instead. Switching back (booted from CD and used "rescue a broken system") revived the VM.
My first guess is that some DM driver module needed for LVM is missing from the linux-virtual package.
I have installed 10.10 as a virtual machine under my 10.04 host installation. I have then attempted to install the guest additions to make it more integrated with the host. When I start the autorun of the guest additions, it tries to compile some programs. This seems to be a feature of the VBox in 10.04 and worked with 10.04 was also the guest. However, with 10.10 as the guest, I get a compile error, specifically this at the end of vboxadd-install.log:
[Code]...
I have Win 7 in my hard drive (sda) and I installed Ubuntu 10.04 in other hard disk (a usb disk), but when I try to boot my pc from the usb disk (sdb), the grub shell is displayed. No menu is displayed. When I boot Windows 7 from sda, it runs correctly. The problem it's when i wanna boot Ubuntu. I ran bootscript on the live CD and this is what I've obtained:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for /boot/grub.
[Code].....
I am a long time ubuntu user (4.10) and have had a fair bit of experience installing ubuntu and the many mishaps along the way.
So after having no internet for a year I decide to try the new 10.04 flavour by ordering the cd from the site.
Installation went well, no hiccups. But when I restarted the comp it went straight to Xp, so I thought I'll just use the SGD to boot the partion anyway and fix this small problem later.
After SGD confused sda with sdb, I figured out that GRUB2 is now the standard boot loader.
So thats where I am lost, I have searched the forums quickly (25 pages or so..) and realise that I am not going to fix this easily or by trial and error.
here's some info
Ubuntu 10.04 LTS
WinXP SP3
Intel P4 3.0
1.5 GB RAM
[Code]....
I have windows 7 in RAID 0 and installed Ubuntu 9.10 to another Sata drive. Ubuntu is working fine but if I try to boot windows in the Grub2 loader it goes do error and lets my to restart. I have finish the windows system recovery and setup repair several times and it won't find any problems. I can't get to windows loader.
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sdb
=> Grub 2 is installed in the MBR of /dev/mapper/pdc_chfbjcefbd and looks for
(UUID=c859191e-3279-4ecc-a569-4dfc8e1789b3)/boot/grub.
[code]...
The Problem, installing ubuntu over top of windows and vice versa causes the windows boot menu to forget about ubuntu.The Solution:1. Using bcdedit from within windows to edit the boot menuClick Start -> Type Cmd.exe run it in elevated mode (as an administrator) by right clicking it and selecting "Run As Administrator" Inside the console type bcdedit, notice that the ubuntu boot entry is still there, for example i use three o/s , windows 7 professional x64, windows 7 ultimate x64 and Kubuntu and it looks like this
Windows Boot Manager
--------------------
identifier {bootmgr}
[code].....
My girlfriend upgraded from Karmic 9.10 to Lucid 10.04 when the upgrade became available. She did it from Update Manager as opposed to a clean install.
I have no idea what she did, or how the process works (I installed from a Live CD on my own computer) and ever since she did it, she hasn't been able to boot into Windows XP from GRUB2.
GRUB2 loads up fine, with Ubuntu and Windows listed. It'll boot into Ubuntu with no problems. Selecting Windows will just re-load GRUB2.
I've tried re-installing GRUB2 but that hasn't worked. My lack of imagination means I have no idea what to type in to Google, or the forum search.
9.10 uses GRUB2, so the instructions below are obsolete. Is there anyone here who could provide instructions for adding Geexbox into the GRUB2 menu? If you already have a Linux OS installed on your system, you might just want to add a GeeXboX entry to your existing bootloader. This allow you to install GeeXboX very easily. From GeeXboX CD, simply copy the GEEXBOX folder into your Linux / partition (we suppose it to be /dev/sda1 here).
Modify the /boot/grub/menu.lst file to add:
title GeeXboX
root (hd0,1)
kernel /GEEXBOX/boot/vmlinuz root=/dev/ram0 rw rdinit=linuxrc boot=UUID=$my_uuid lang=en keymap=qwerty splash ...
initrd /GEEXBOX/boot/initrd.gz
quiet
Just take are about two things:
- the field root (hd0,1) is to be adapted according to the rest of your GRUB's configuration.
- the $my_uuid value is the unique ID of your partition. Check within your GRUB config file, which value is set for other OS on the same partition or use ls -l /dev/disk/by-uuid/ to see which uuid matches your partition.
I installed Fedora 15, which was my first real departure from Debian based Linux OSs. I absolutely love the new Gnome 3, and was able to configure F15 to work as I wanted it to. On rebooting I realized that there was no boot loader screen, that F15 just booted and didn't give me a choice as to which OS I wanted to use. Eventually I was able to configure grub to let me see the boot loader and added my old boot loader as a choice. This worked well, maybe not a perfect solution, but it worked. This weekend I installed LMDE (Linux Mint Debian Edition) to another HDD. LMDE uses grub2 and after the install F15 was not recognized.
Two questions: Is there a way for grub2 to see F15? or Can F15 be installed using grub2? I really don't mind re-installing from scratch.
so i've just installed Burg loader in a PC which dual-booted Windows 7 and Ubuntu 11.04 with no problem using grub2 in the past. But after i installed burg it just boots up straight into the Windows OS and Ubuntu is nowhere to be found. Is there a way to restore grub2 preferably without having to lose any files?
View 2 Replies View RelatedI've tried to be clever but as usual I didn't think before acting and missed a small detail.
I have recently installed karmic (dual booting with Vista) on my dell xps laptop. The install went fine, I'm very happy with my new OS.
I bought a new Seagate 500GB portable external HDD. I got a bit over-excited and installed karmic on the external drive. This worked fine and I got a lovely (but slow to appear) Grub2 menu showing my vista and both ubuntu options.
My problem is that now, when I unplug the external drive, Grub fails and I get a grub rescue> prompt. So I need the external drive to be plugged in if I want to boot.
It seems I have done something to the grub configuration. I have read around the subject but I am not confident about how best to proceed.
I understand there is an 'advanced' option in the installer which will allow me to choose where to install grub. Presumably I want it on the internal drive so that I can boot without the external one plugged in.
Am I right in thinking I can just pop in my install disk and redo the installation?
If I indicate I want to install Grub on the internal drive, which partition should I aim for?
Will I get a grub option for booting to the external drive?
Will I be able to plug the external drive into a different machine and boot from it?
I haven't done anything with the fresh install on the external drive so I don't mind losing that.
I Installed fedora in Virtual PC after adding the line while booting as shown in the forums. But after installing to the hard disk, The Fedora virtual machine is not booting. The window closes without any notice automatically.
View 12 Replies View Relatedthis-Am getting tis error after installing ubuntu server 8.10 in sun virtual box and trying to boot for the first time.."This kernel requires following features not present on the cpu pae unable to boot please use the appropriate kernel for your cpu." currently am using ubuntu desktop edition 9.04. on d top of it i installed virtual ubuntu server8.10
View 2 Replies View Relatedi wanted to install zsnes emulator on natty 64, but it turns out there is no such package. so i tried zsnes_1.510-2.2ubuntu3_i386 using "force architecture" command but it failed due to dependencies problem. later i found amd64 version of zsnes deb package. now when i try to install it it says "it's not co-installable with zsnes:i386 1.510-2.2ubuntu3 (Multi-Arch: no) which is currently installed". i cannot find zsnes:i386 package in synaptic, removing or purging the package doesn't work (Virtual packages like 'zsnes' can't be removed), cleaning cache with apt-get clean doesn't change anything.
View 1 Replies View RelatedI recently got the Message, that i should do a partial System Upgrade. It included an update to Kernel 2.6.34. Since this update, i cannot boot with this kernel:
Code:
Mounting none on /dev/ failed...
i can still boot with older kernels, but many drivers including wifi and graphics drivers dont work there anymore.
I have an Intel NIC supporting iSCSI boot.I successfully installed Karmic Server 64-bit on the iSCSI target.But it won't boot from it.It looks like it can't mount the iSCSI target:
Code:
Gave up waiting for root device. Common problems: ...
and it drops me to a BusyBox shell.
[code]....
Put together a PC using the following:
Foxconn M61PMP-K AM3 NVIDIA MCP61P Micro ATX AMD Motherboard
AMD Athlon II X2 240 Regor 2.8GHz Socket AM3 65W Dual-Core Processor ADX240OCGQBOX
Patriot 2GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model PSD32G13332
HITACHI Deskstar 7K1000.C HDS721010CLA332 (0F10383) 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
Plus an old case and PSU and an old 18gb IDE drive, and an old CD-RW drive
I put the CD in and boot the machine. The initial Ubuntu screen comes up ("Ubuntu" with the line of dots below it) for a few seconds, and then it disappears and I see this text:
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
At that point it hangs and will proceed no further. I've tried this with the latest Mythbuntu Live CD and the latest Ubuntu Desktop Edition Live CD. Both were x64 versions.
Right after selecting [Install Ububtu] / [Try live CD], I get this message and the system freezes. The same message appears when trying to install Ubuntu from VMWare Player or booting from a CD instead of a USB stick. Has anyone else experienced the same?Processor Intel Celeron 900 Mainboard:Acer BA50-MVBios:Phoenix V1.3311Chipset:Intel GL40Video Card :Mobile Intel(R) 4 Series Express Chipset FamilyHard Disk :Western Digital WD1600BEVT-22ZCT0 ATA Device (160GB)My old HP Pavilion boots and installs Ubuntu 10.10 just fine from the same USB stick. I have tried both 32bit and 64bit editions with same results.
View 1 Replies View RelatedI have a like problem with all programs last time:
For example, package libtwolame0 installation fails
Code:
I had a like problems with another packedges, when try install mplayer and codecs from Packman.
i have installed ubuntu 10.10 on Virtual box and now am trying to install guest additions as shown [URL].Problem is when i type into the Terminal "cd /media/cdrom" it replies with "No Such File or Directory"
View 1 Replies View RelatedAfter Updating to version 8.0 today...
Package Updater GUI is Failing with the message:
No updates are available
No network connection was detected.
=================================
I did updates almost daily on wheezy
Todays updates [via the Pkg Updater GUI] were over 300 meg.
After the updates and reboot
System was showing version 8.0 in the GUI desktop and using 'cat /etc/debian_version'
Then...
From terminal I did ...
apt-get update
apt-get dist-upgrade
The dist-upgrade was over 40 minute and ~ 500meg
Things seemed to go well.
I updated sources.list with apt-spy.
[In order to trouble-shoot: I subsequently commented-out the apt-spy sources and found some generic sources on internet]
==========================================
# sources.list generated by apt-spy v3.2.2
#
# Generated using:
#
[Code].....
apt-get and Synaptic GUI both work.
I did/reviewed some settings in the Synaptic GUI I imported two v8 signing keys into Synaptic from [URL]
Package Updater GUI is Failing with the message: No updates are available No network connection was detected.
I have a desktop running on Fedora 14. I installed LAMP by using scripts for package installation. That works fine. Also, I have a virtual environment (Virtual Machine Manager), in which I installed Fedora 14 as well. I tried to install LAMP by the same scripts and the same packages as on my desktop, but strangely - it does not work.
I figured out that in both cases two instances of httpd.conf are installed, one residing in /etc/httpd/conf/, the other one in /usr/local/apache2/conf. The first one seems to belong to the server that is by default installed together with Fedora 14. The second one is the result from the package installation.
For a reason unknown to me, the second one (/etc/httpd/conf/httpd.conf) is always activated on my desktop, while the first one (/usr/local/apache2/conf/httpd.conf) is activated by default in my virtual computer. I have been able to change the DocumentRoot with succes.
I know how to install LAMP with yum, I have a second virtual computer with LAMP installed by yum, and the whole question is not an urgent one, but... I am just curious... what could have caused the difference? And what would I have to do whenever I would like to use the package installation or vice versa?
I'm installing openSUSE 11.2 on a notebook from DVD + locally mirrored update and kde4 buildservice repositories. This usually worked fine, but this time, the installation always fails at about 89% while installing some package, whose name I can't find out. Its script fails with error 127, the error message blocks access to the log.
Is there a way to continue the installation process afterwards, instead of always trying to reinstall and hoping to find out the name of the failing package?
we need to install gnuplot and synaptic manager fails because Intrepid is unsupported. I know we can update to a newer version but we cannot do it now (we'll do it during summer holidays). What's the best way of installing gnuplot (or some other aplication) on our systems? Should we download from sources and compile? Could we add some special source to our list and download from there?
View 1 Replies View RelatedMigrating Virtual Guest to Native Host
I have been using ubuntu server and desktop on virtual box for a while now. I have come to enjoy it more than being in Windows. I would like to install it natively. I am wondering. is there any way I can take my virtual machine and apply what I have done there to a new ubuntu install?
I have a ntfs hard disk, will ubuntu resize that for me at install?
Any good apps for backing up all my my firefox data and then applying that to my firefox in ubuntu?
I need to keep windows for some stuff for work, and for some games I like.
I'm trying to ssh into a virtual installation of ubuntu I have, named "ubuntu-x86" but I can't get it to work for some reason. I have two network cards, both assigned to NAT, on the virtual machine, but one has a static IP address, while the other uses DHCP. For some reason, the command:
[Code]....
I couldn't find a clear answer to this, but is the linux-image-virtual package for host machines that will contain VMs, or a VM-oriented kernel for guest OS (ubuntu)? I have some guest VMs running on Microsoft's Hyper-V, and was looking for some further optimizations.
View 3 Replies View Relatedwhen I try to install a package, I've the message The following packages have unmet dependencies:package-xy: Depends:lib-something (>= version_number) which is a virtual package.
View 14 Replies View RelatedAfter receiving no response either here or on IRC, I copied 80 package files to a temporary directory and ran dpkg-scanpackages . /dev/null > Packages with the expected result. The curious part is the delay when output redirection is not used: nothing appears until the script completes, when the result is dumped to the screen. It therefore appears that there is an upper limit to the number of packages that the script can handle, somewhere between 80 and 42,474.
Is this an undocumented feature, or just a peculiarity of my system?
I'm new to Debian and wanting to set up a local repository on my work drive. After following instructions online and copying all packages (~43,000) from the DVD set into /work/Debian/8.2/packages/ I ran dpkg-scan-packages as instructed:
Code: Select all# dpkg-scan-packages . /dev/null | gzip -9c > Packages.gz
This produced an empty file. I then ran dpkg-scanpackages with no output redirection expecting to see a flood of text on the screen, but all I got were error messages suggesting that it can see the .deb packages but is not parsing them:
Code: Select allroot@qbx:~# dpkg-scanpackages /work/Debian/8.2/packages
dpkg-deb: error: invalid character ' ' in archive '/work/Debian/8.2/packages/libshhopt1_1.1.7-3_i386.deb' member 'debian-binary' size
dpkg-scanpackages: error: couldn't parse control information from /work/Debian/8.2/packages/libshhopt1_1.1.7-3_i386.deb
[Code] ....
This all seems in accord with the man page, and it's so simple I'm wondering what I'm missing.
I have RHEL running in Virtual Box and my native OS is Win 7. From a purely educational standpoint, I want to be able to access RHEL from Win 7 over SSH. I download putty but don;t know how to make it do what I want. Ideally, I would like to use the linux command prompt at a minimum and preferably access the GUI apps also. IS this possible? I am just trying to explore and expand my linux knowledge.
View 7 Replies View Related