You don't run x windows in the cession. Let say you run init 3 at the prompt and login your acount. Is it possible to run a command that let you open a little screen with graphic interface and that accept the mouse. Exactly the inverse of the console in an X environment.
I'm fairly new to Linux so I'm going to need a step-by-step guide to get me out of this rut. The install of Linux was fine but when I booted up I got this error. VFS: Cannot open root device "302" or unknown-block (3,2) append a correct "root=" boot option;here are the available partitions;
0800 78150744 sda driver:sd 0801 47428608 sda1 <-- this is my Windows partition 0802 30719552 sda2 <-- this is my Linux partition 0b00 1048575 sr0 driver:sr 0b01 1048575 sr1 driver:sr
Kernel panic - not syncing:VFS:Unable to mount root fs on unknown-block (3,2) I guessed from reading this error Lilo isn't pointing to the right partition to boot from? How will I fix this? I read another thread about boot problems on these forums and a guy said to do this:
#mkdir /slacktemp #mount /dev/device /slacktemp #chroot /slacktemp #cd /slacktemp/etc <-- for me it told me that doesn't exist #vi lilo.conf <-- couldn't do nothing and was frozen #lilo -v -t -b /dev/device #lilo -v -b /dev/device
The above solution did not work for me. Can anyone shed a light on a Linux rookie?
I have to work inside two environment. One Windows (local) and one Linux (remote).I've installed the screen linux utility in both.I'm able to open a screen on my windows, then in one tab, I opened a ssh connection to the linux remote and I start another screen.Samplelinux -- |0 linux remote 0| 1 linux remote 1 windows-- |0 linux | 9 windows I can switch between "linux remote 0" and "linux remote 1" using Atl+.This is configured in .screenrc (bindkey "^[0" select 0)How could I switch to "9 windows"?
My website is domaintoolscentral dot com, I want to use PHP inside of my HTML pages but I can't seem to figure it out. I know it has to do with the httpd.conf file or I think it does. I do not want to use a .htacess file.
I turned on my computer and the Ubuntu desktop is flipped upside down and inside out. I can still SSH in and ran a backup which is good but now I need to fix this.
Where should I start? I dont know which logs to start checking or what to do.
is it possible to include an add-on (or more) inside a self-compiled txz package for firefox? Actually I'm trying to build a fully localized version adding UI localization and (possibly) the italian dictionary. The latter is distributed as an .xpi (zip archive) and is supposed to be installed from inside firefox, so I don't know how to include it at compile time or at least before building the txz...
I'm setting my CLASSPATH in /etc/profile.d/jre.sh. In a login shelleverything is fine. In an xterm window, the CLASSPATH consists of two of every intended entry.In jre.sh I am doing aCode:export CLASSPATH=$CLASSPATH:/many/paths/to/jarsSo I'm guessing this is getting run twice in the xterm case. Can someone explain what's going on here and what I should do to remedy this?
I recently installed Lucid Lynx inside my Windows XP using Wubi. When I restart I don't have a boot screen giving me the option to boot into either or, it just boots directly into XP. How do I fix this so I can boot into Lucid?
Got Slackware 12.2 and there's no sound. Ran alsaconf and it finds three 'soundcards' whereas I have only onboard sound. None of the choices achieve anything. Interestingly, Windows detects the sound as coming from 'C-Media AC97' whereas alsaconf doesn't see that, but reports two others:
ATI Technologies Inc. RV 610LE audiodevice Raedon HD 2400 PRO VIA Technologies Inc. VT8233/A/8235/8237 AC97 Audio Controller As well as: (Legacy)
This is my first posting as a Linux Newbie. I have installed Ubuntu 10.04 inside of a MS Virtual PC on my Vista machine. Everything seems to work beautifully and is stable. However, I would like to use a resolution higher than the current maximum of 800x600. I've poked around on the web and have tried various tips. I tried using the xrandr options which added a higher resolution mode, but when I would try to set the output to that resolution, I would get an error message to the effect that I could not exceed the current maximum of 800x600.
I tried to cobble parameter values together and create an xorg.conf file, but every iteration seems to produce a bunch of colorful vertical bars within my Virtual PC window, and I would have to blow away that virtual PC setup and rebuild it (along with reinstalling Ubuntu). As I said, 800x600 is not a show stopper, but I would like to take advantage of the real estate I have with my display. These "fifty-five year old" eyes could benefit from the larger size. FYI, I did take a stab at installing Virtual Box, but got the infamous "blue screen", so I would rather stick with what appears to be a stable virtual PC base.
I sshed to a server a week ago, then ran *screen* and created a few windows in my screen session. I then ran a few programs on those screens. All the programs were running in the background (I run them with &). I did not close or detach from the screen sessions. So I was still connected to those screen sessions from my client machine.
Then, this morning I find my client machine rebooted. When I do screen -ls I find there are no screens available to reattach to. But that is not the worst part. The strange thing is that all my processes (which were running on the server) have disappeared as well, even though they were running in the background. I thought 1) using screen I will be able to re-attach to old screens when my client restarts, 2) If I have sshed to a server and have run programs in the background, restarting the client should not stop those programs (even if I had not used screen).
I am trying to patch linux kernel 2.6.24.7 with drivers for via chrome 9, by guidance of this article:[URL].. the problem appears when I run command: make xconfig I have following errors CHECK qt
I've just noticed something odd with 'su'. When you run 'su' with both the '-' (aka -l) and -c command options like this: "su -l user -c command" it doesn't appear to run /etc/profile before running the specified command even though the -l option is specified. If you run "su -l user" without the -c it does run /etc/profile.
Now, on other linux such as fedora it works as expected and runs both /etc/profile followed by the command specified on the '-c'. I'm fairly sure it used to work this way on Slackware (and every other UNIX I've ever used) too. "su -l root -c env" is a good way to see, as you'll find most the environment variables are missing.
i've been trying to make a decision on which desktop environment to use and i've been using a few over the past week to try to decide which one. I liked gnome 2.x previously but have been really turned off it since it's not supported by Slack and 2.x is no longer even supported by gnome. I tried xfce, since it's gtk2 app as well and i really wanted to like it, i did; but there is just some things that make me wish i was using gnome. Anyways, i was wondering which third party gnome would be best suited for me. I'm using Slackware 13.37 and i want gnome 2.x, not 3.
Pat's old documentation recommended, http://gsb.sf.net http://gware.sf.net
and i checked out them sights, but the last updates seemed to have been years ago.
I am currently on the job of customizing my laptops for different usage areas. I am very new to Linux (~2-3 weeks) and have not yet developed a solid understanding of the purpose of the different desktop environments.This is why I came to you. I assume most DE's can perform the same tasks as any other DE if you tweak stuff enough, but I am currently lost in this wilderness, and would love to hear the strengths and weaknesses for the different DE's so I can settle for something and get good at it... (I'm going to mainly use it for programming, if that's any vital information.
try xface in my slackware(I updated my slackware from 12.0 to 13.0 a few days before). But, i don't know how to configure the xface windows environment like KDE(i used this before, but found it's very slow in my my new slack). I browsed all the information on the slackbook but found nothing. Googled, failed too
(Using Ver. 10.04-lucid lynx) This is because, at random, Gnome environment will have some kind of problem, leaving me with a black screen, like the terminal but not it, where I can enter my password and that's just about all. There seems to be no way to enter the graphical linux environment. I was forced to wipe the hard drive clean twice because of this and both times I reinstalled lucid lynx.
I have been googling around for Java VIDEO tutorial on Linux environment running command lines (on Editor NOT IDE). However most of them found are on Windows environment running IDE. I only found 1 or 2 on Linux environment but the screen/pictures are not clear.
I've recently installed Slackware 13.0 without a hitch (I haven't tweaked much yet), ran adduser, switched to the new account in a second virtual screen, typed in 'startx' and was pleased to see things start up.
Then I discovered the widescreen display was off center, leaving a black bar on the right edge of the screen and the menu button in the lower left corner completely off screen and not visible (even the menu when I was able to click around and pull it up shows only the right edge of the menu box). I have no idea how to properly configure a widescreen and the documentation is a little confusing.
IN 3.5.10 I am able to display the full $PROMPT_COMMAND environment variable in the Konsole title bar. Kind of handy and I did not need to display that information in the $PROMPT variable.
In 4.5.5 I am having trouble figuring out how to make that work correctly. The title bar displays only the directory name rather than the full path and user name.
This is my $PROMPT_COMMAND:
history -a;echo -ne "33]0;${USER}@`uname -n`: ${PWD}07"
All I see in the title bar is:
dirname: bash
I should see:
username@hostname: full path to present working directory
I have a Gateway NV59C09u laptop, I tried running both maverick and the latest beta of natty as live usb's to no avail. It boots fine, but at the first screen the light is so dark that I can't really read anything nor see the mouse pointer, I can just barely make out a window-looking thing. Trying to increase the brightness using my F-keys doesn't do anything.
It's gotta be some kind of graphics related issue, because booting the alternate iso works fine. If I could figure out a way to boot the ubuntu-desktop live image via a different video driver that would probably work, but I'm not sure how to do that (ctrl+alt+f1 does nothing).
When I do #./pdfedit.SlackBuil I get the information in the terminal:
[Code]...
Whether we want to checking PDFedit prepare-core-dev package ... yes Whether we want to checking build PDFedit gui ... yes configure: error: QTDIR environment variable must Be Set
I have just installed Fedora (13) for the first time. It's great ! So thanks to all its developers !
I managed to do many tweaks I wanted to, in no small part thanks to this forum, but here's one that eludes me and my google-fu.
I'd like to customize the login screen (if I grokked correctly, that's gdm). I already saw how to change the background or how to enable automatic login, but what I'd like to do is this :
1. Disable that rather annoying "pong" sound when I select a user,
2. Set a default desktop environment. Gnome seems to be the default environment selected in the drop-down menu, but me, I'd like for it to be XFCE.
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
I just went out and bought a 19" flat screen LCD monitor. Plugged it in and it is not working correctly. When I start the computer the bios info will show up on the screen, then it goes to the screen that let's you choose an O/S if you were to dual boot. After clicking "enter" it will show the first line of the boot then it goes off into horizontal colors then goes black. I have search many different posts and googled but nothing is giving me a hint at this.I changed the xorg.conf to match the refresh rates to match the monitor but that did not work, and did not really think it would considering the point this monitor goes out on me. running: 2.6.27.7-smp 01:00.0 VGA compatible controller:
Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter
when I open a graphical terminal in the GUI, I appear as being the same user who ran X in order to enter the GUI, say user_foo, as said by whoami. But a program I usually use in a text console as user_foo, gets Command not found here. Furthermore, the name of the dir I am in does not appear in the prompt, whereas it does when in the text console.
I guess this has something to do with enheriting the environment, but don't know wht to do for this to happen. How do I open this GUI terminal? I do so by choosing among one of several ones in the DE main menu. When I click the menu entry, the terminal doesn't ask for a password.
What happens is that I resorted to deleting my .kde directory after my kid destroyed my profile where title bar, menu, konsole get broken. After deleting, I login again thus regenerating the .kde directory. To avoid my kid from messing my desktop, I tried to lock it. It does not lock.
It just need a KDE full restart perhaps since when I login the other day, it now works.
I'm updated to Slackware current for almost a month already and have not played a lot on KDE desktop (busy programming stuff).
However, on day I tried to lock the desktop in KDE to avoid the kid from destroying my cool desktop setting, but it didn't lock. Cool, so I tried screen saver and add an option to lock the screen.
When I test screen saver, it displays. But when I wait for 1 minute(I set it that way), it doesn't fire up. Not even after 15 minutes which I think the default.
It usually work before (several months ago) using the lower version of KDE. It is just last Saturday that I noticed it.
I tried to dig the profile management but I could not find anything relevant there.
I've noticed something, and hoped there was a work around.when I write a simple bash script, and run it, if I close the terminal i ran the bash script inside, the bash script stops. What are the solutions for this? Basically I want to run my bash script and close the terminal, keep the bash script running.