Hardware :: HP W1907 19" Flat Screen Slackware 12.1 Black Screen After Lilo Prompt?
Feb 27, 2010
I just went out and bought a 19" flat screen LCD monitor. Plugged it in and it is not working correctly. When I start the computer the bios info will show up on the screen, then it goes to the screen that let's you choose an O/S if you were to dual boot. After clicking "enter" it will show the first line of the boot then it goes off into horizontal colors then goes black. I have search many different posts and googled but nothing is giving me a hint at this.I changed the xorg.conf to match the refresh rates to match the monitor but that did not work, and did not really think it would considering the point this monitor goes out on me. running: 2.6.27.7-smp 01:00.0 VGA compatible controller:
Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter
Just upgraded my system from 13.0 to 13.1 Most things went pretty smoothly, but I tried 'startx' before the post-upgrade/config reboot and the system hung - "time to upgrade my video drivers", I thought. Upgraded to Nvidia 195.36.15*. X works perfectly, and a modprobe shows the 'nvidia' module loaded. So far so good.
However, when I try to use any vesa modes in lilo, I get a blank screen after the BIOS check and the system hangs - even toggling numlock on or off won't work... So I can only boot up in text mode. This makes me unhappy, partially because I like penguins, but also because it is an absolute insult to my new (old) monitor. I thought this could be to do with the nouveau conflicts reported by -current users some days ago, but the respective blacklist file is present so I'm stuck as to what to do... *I've tried 195.36.15, 195.36.24 and the latest 2xx beta drivers. All exhibit the same behaviour.
EDIT - forgot to post my video card specs. It's an 8500gt w/ 256mb, 128-bit DDR3.
the power went off in my house for a split second but it was enough for my computer to die as such linux refuses to boot, i reinstalled ubuntu 3 times now and still nothing.. the only way i can get it to do anything regarding booting is if i have a windows xp install disc in the dvd drive. other than that, bios posts and then i get a pure black screen with a white prompt and it sits there i did however find the boot info script and ran it so here is the results:
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
how to get sound to my flat screen. Here is what i have graphics card (GeForce 8400 GS), ubuntu (9.10), tv (vizio va320e). currently hooked up dvi to hdmi
After updating my Slackware-Current (there was kernel and glibc package updates), I just get a black screen with a blinking "_" in the top-left corner when I logout.
I checked /var/log/kdm.log and found these errors:
Code:
I've found a workaround: uncommenting "TerminateServer=true" in kdmrc.
I'm running Slackware 13.37 64bit on an HP 2945 Laptop. KDE 4.5.5. I have a NVIDIA driver installed (270.41.06) and running KDE at 1200 x 800. I've upgraded to 13.37 about 2 months ago. I started noticing an issue with the windows in KDE pretty much upon start up. If I have multiple windows open and try to maximize a window or drag a corner of the window to a large size, the screen within the windows goes black. Also any menu in the windows goes black. If I resize back down the issue goes away. Or as stated before, if I have only one window open the problem doesn't exist.
HP laptop with Intel graphicsunning Slackware current with a 2.6.38.7-smp kernel.Booting with the "nomodeset" kernel parm works but X gets stuck with a 1024x768 resolution. When booting without, the screen goes black after a few pages scroll by, just at the point where the console switches to a higher resolution. Changing to a different console didn't help, so I blindly log on and type startx, and the screen comes back to life with KDE running at the higher 1366x768 resolution, I try a few apps, the webcam, suspend to RAM, resume, and everything is now working flawlessly so it doesn't look like an X issue.At this point I can change to another console (or exit KDE altogether) and the screen is back on at the higher resolution. Looking at the X log and some dmesg output makes it seem that starting X possibly replaces, reloads or unloads a driver? If this is the case, how can I prevent the conflicting driver from loading in the first place?Quote:
I did a fresh install of Slackware64 13.37. All went well. I download the latest Ati video drivers, 11.4, and build the slackware package. Install, and run aticonfig --initial all good. But when I run startx I only get a black screen
This obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
I can't get the Ubuntu 10.4 Live CD for PPC to work on my old 800 MHz flat screen iMac G4. I believe it's supposed to work, but the installation dies with a magenta screen about a minute after selection of any boot option in the yaboot dialog.I tried all the sensible boot choices and options, all with the same result: some trundling of the CD reader, display of the messages related to the ramdisk, more trundling, then a blank magenta screen and no more trundling. The iMac becomes totally unresponsive: no more messages, can't enter any command shell. I get the impression (complicated story) that it begins to install the X server and then aborts.
This iMac has a PPC G4, 512 MB of working memory, and a GeForce2 MX video card with an nVIDIA chipset and 32 MB of video memory. There seems to be no hardware problem: OS-X 10.3 and OS-9 run just fine including wireless networking.
I'm trying to run Slackware 13.37 64-bit in a VirtualBox virtual machine. My VirtualBox version is 3.2.12. I had to disable compositing to keep the X-Server from reporting a segfault.Now the problem is that on logout from KDE I get a completely black screen. I can switch to a console session and type commands to get the login screen again.
telinit 3 telinit 4
I tried editing "kdmrc" to add the line "TerminateServer=true" but it had no effect on the problem.I had this working with Slackware 13.1 at one time, but I can't seem to get it working properly now even without desktop effects.I'm trying to avoid changing my VirtualBox software since each version seems to just introduce new and different bugs. The 4.X versions are not yet very stable.
i just installed slackware 13.37 which worked fine but when i boot it up it runs a number of lines and then the screen just goes black... i can login as root blindly and start x (i THINK, judging from hdd led)... but screen stays black... its a laptop and closing/opening the lid doesnt work either...
i am dualbooting with slack 13.1 which runs fine... it switches screen res at some point during boot (font is smaller) and i would say that is the point where the screen goes black in 13.37...
I am new to slackware, but not new to linux. I recently installed slackware 13.37, and am enjoying it very much so far. The most annoying problem I currently have is that, after starting X, I cannot switch to a virtual terminal or even end X without having a problem. For instance, from the GUI if I hit ctrl-alt-F1, instead of going to the 1st virtual terminal, the screen fades quickly to black and does not return. I have not been able to make any progress on this problem, so any input would be greatly appreciated.The only thing worth noting really is that I'm using Fluxbox as my default window manager. Other than that I haven't done a lot of modifications to the base system other than installing some basic packages, but I had this problem since booting directly after installation of the os.
Got my Slack running on vostro 1310 for a while now. But just Today... first for what ever reason my wifi stopped to work (at boot time) even though interface was up as usual, driver was loaded, supplicant has not been touched etc. So I wired up a LAN cable and the at boot time I saw an information from eth0 that packet length is 0 and cannot be parsed (great no network at all). Tried to investigate the problem on a different machine, and one of the suggestions I've found was to set router to no security and see if wireless will connect. I thought that it would be a good idea to reboot the machine to attach to the rooter at boot time and no eth0,wlan1 tries to connect to the network and then I get a black screen instead of login window
I installed Slackware 13.1 a little bit ago, played around with it, performed an upgrade with Slackpkg, messed around with some settings, and chose a new theme. I had set the runlevel to 4 and when I rebooted after choosing a new login theme the screen just went black at the point where the login prompt should have appeared. I couldn't even get into the CLI. Using a LiveCD, I set the run level to 3 again and was able to log in, but when I try to start X the screen goes black and freezes again, so I believe my new login theme is the culprit. Is there a way to change to the default login theme from the CLI?
I have just installed slackware. I have done Code: Xorg -configure And chosen kde for init program while installing slackware. But when I type Code: Xorg -config -retro or Code: startx I get black screen with blinking button on monitor and keyboard. Obviously KDE doesn't start.
1. I start the computer and after startx I got black screen, the keyboard is not responding the led of the display is yellow etc. Now I reset the computer, 2. Booting Windoze 3. Choose Restart not Shutdown from Windoze 4. Booting Slack 5. startx works fine, the X server is starting and working great.
I have Radeon 9500. I configured X server with 3D accel over 2500 FPS on glxgears. The same problem persists even with X server VESA configured.
I made a mistake and bought a $50 IBM A50 to use as a media server...Installed Karmic on it and figured out that the video card couldn't handle anything beyond the factory setting of 800:600, something like that...
I have not taken the time to learn about video cards and now I suffer....I found this "solution" EVGA 256-P1-N399-LX GeForce 6200 256MB 64-bit GDDR2 PCI Video Card
Which has mixed reviews on newegg
I want to use this machines( or another) to playback movies on my flat screen. I suppose I need to find out more about my TV as well...
i have an asus radeon x1650xt vga, i can use the latest radeon driver in ubuntu 10.04 and also in the newest fedora but in slackware 13.1 i get the same black screen i used to get with older ubuntu, fedora and other distros. i can only use slackware with the vesa driver, what could be the problem...here is my /var/log/Xorg.0.log
Code: X.Org X Server 1.7.7 Release Date: 2010-05-04
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit: I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
I downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.
I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.
OpenSuse 11.3 with nVidia drivers.I have the screen working fine though it only runs in 1600x1200@75 using the nVidia driver (GTX260 card).When I play a game in full screen mode all seems OK but when I exit the game then I just get the mouse pointer on a black screen.There must be something present since the cursor changes as I move it, normal pointer -> hand over a link etc. It's just that black on black isn't very readable.
I have Ubuntu 10.04 running kernel .26 installed on my Dell Dimension 2350 with 512mb of memory. The problem I have been having is, When I am using the computer mostly Internet stuff for no reason the monitor will go black then on the screen it will be at a terminal screen, kind of like when you start up the computer, I don't remember what is all on it but the last thing in the list was: checking battery state: OK after that the screen will flash in multiple colors and then it goes into a loop of just black screen than a colorful flash and back over to a black screen. the only way I can fix that is by holding down the power button. this will happen mostly on face-book on the games and just on the profile page, but it does happen just checking my gmail or play solitaire it does this around 4-8 times a day.
I've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
