What is the issue with slackware to open a *pps powerpoint file.I use Slack32.13Can't find any application in standard.Is there something in the slackbuils ?Don't want to install the whole Office
View 3 RepliesI need to have a video in a powerpoint like presentation. I make the presentation with Impress, open office, save as a .ppt and when i close it and open it again, the video isn't there.
View 1 Replies View Relatedi wonder if there is an incompatibility or just a config to do, to get the soudn enabled when playing ppt within Open Office
View 4 Replies View RelatedI'm using pptview from the repositories to show a powerpoint file, but when I'm connected to a projector, it insists on showing the show on my laptop screen rather than the projector.
View 1 Replies View RelatedI get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I tried to upgrade my slackware xfce 13.0 >> 13.1. I read "man slackpkg" first, and then I did exactly what I read at the man pages, my system was in init 1 mode.
The mirror I used it was the Greek mirror for 13.1. The command slackpkg upgrade-all was running ok until the "r" letter after that all packages did not upgraded because it was ERROR CHECKSUMS.md5 to all of them. Slackpkg did not upgrade all this packages but just check them and them skip them.
When everything stopped I reboot but at loading time it stops and I have this message: "libuuid.so.1:cannot open shared object file: No such file or directory."
After that I have 2 options to press control-d to reboot or to give root pass and login as root@(none):
After I login I cant connect to internet, I cant shutdown the system only reboot it from cl, I even cant go to init 1 or anything else. I dont know if I can fix the problem but I have to try...
Code:
bash-4.1$ konqueror
konqueror: error while loading shared libraries: libfam.so.0: cannot open shared object file: No such file or directory
I have just installed SABnzb application in my home folder. The executable file is SABnzb.py When I run the command in the Konsole # python SABnzb.py I have this Quote: python: can't open file 'SABnzbd.py': [Errno 2] No such file or directory
View 5 Replies View RelatedI just installed Alien Bob's HandBrake package and am getting a ton of warnings:
Code:
bash-3.1$ ghb
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstmpeg2dec.so': libmpeg2.so.0: cannot open shared object file: No such file or directory
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstsndfile.so': libsndfile.so.1: cannot open shared object file: No such file or directory
[Code]...
I've been building a minimal Slackware system with a small number of packages installed (following this article of ). But now I'm facing a problem with a library call 'libmpfr' when installing the package 'pmount'. I have tried installing libmpfr from source but the installation also REQUIRED libmpfr. Code: error while loading shared libraries: libmpfr.so.1: cannot open shared object file: No such file or directory.The only solution I could come up with is to look for a precompiled libmpfr so that I can install it using installpkg. But nowhere could I find it by now.
View 2 Replies View Relatedapparently .xz files aren't readable by Ark, but I need my computer to be able to read it in order install a package. Does anybody know how or what I can do to allow my computer to read .xz packages?
View 10 Replies View RelatedHow do i per say open a file with like transmission when i am downloading it from the internet it says open with then you click it on firefox and it goes to root. Where do i find the files for opening a program instead of saving and going into the program and opening it that way?
View 4 Replies View RelatedCode: mplayer: error while loading shared libraries: libcdda_interface.so.0: cannot open shared object file: No such file or directory
View 5 Replies View RelatedI'm running Slack 13 and trying to get my CAD suite to get going. But with little luck so far. It's built from source, gotten directly from the project page (unavailable at this time)[URL]. This is what I get when trying to run:
Code:
bash-3.1$ gerbv
gerbv: error while loading shared libraries: libgerbv.so.1: cannot open shared object file: No such file or directory
bash-3.1$ locate libgerbv.so.1
/home/wed/gedagaf/gerbv-2.3.0/src/.libs/libgerbv.so.1
[code]....
I've encrypted the /home partition. I've been successful in doing this by following the instructions here:slackware64-current/README_CRYPT.TXTBut after upgrade to cryptsetup-1.2.0-x86_64, when I boot up I get 'no such file or directory while trying to open /dev/mapper/crypthome'I have to manually type 'cryptsetup luksOpen /dev/sda9 crypthome' and mount each time to get into the encrypted partition.I expect to be prompted for the password on boot but I just get that error, what is wrong?my config files:
/etc/crypttab:
crypthome /dev/sda9
/etc/fstab:
[code]....
I am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
Code:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
[Code]...
I always have a problem in simple user mode when I insert a USB key. Can't mount, can't open with file manager. I'm obliged to open a simultaneous root session, to do what I want to manage the usb key.
In my user manager, I don't know wich group I have to add to this simple user (it's me) so I am allowed to manage the usb key.
Since slackware 13.0 (upgraded to 13.1), I haven't been able to print anything. I can add printers no problem using the cups gui (or whatever). However any print I send to any printer fails because of:
"Unable to open image file for printing!"
I can post the whole error log if that helps, but I can't see much in it. I haven't been able to print for about 6 months, which is getting a bit annoying.
p.s, as a I lazy option I upgraded to the cups in -current, but that didn't help (although I don't think it was a very different version).
After finally getting my wireless/graphics drivers working yesterday (thanks to this forum ) I startx to realize that not a single KDE/Qt application will launch, along with Firefox, or Chrome/Chromium. (I did a full install from the DVD, not deselecting anything, and when I upgraded to -current, I also did the same.)
Ark said:
Quote:
ark: error while loading shared libraries: liblzma.so.0: cannot open shared object file: No such file or directory
but I managed to fix that one by commenting out 'aaa_elflibs' in /etc/slackpkg/blacklist (on a recommendation from #slackware), and running slackpkg upgrade-all again, but that's the only one (afaik) that was fixed. Ark still doesn't work, but it doesn't show that error anymore. When I run it, a box pops up that says "Unable to find Ark's KPart component, please check your installation."
Kate still says:
Quote:
kate: error while loading shared libraries: libkemoticons.so.4: cannot open shared object file: No such file or directory
Now, konsole, firefox, and Chromium's errors are a little different.
Konsole:
Quote:
konsole: symbol lookup error: /usr/lib/libphonon.so.4: undefined symbol: _ZN9QMetaType15registerTypedefEPKci
Firefox and Chrome basically say the same thing
Quote:
/usr/lib/firefox-3.6.13/firefox-bin: symbol lookup error: /usr/lib/mozilla/plugins/skypebuttons.so: undefined symbol: _ZN9QListData11detach_growEPii
again, I am completely baffled here, as I had kate, konsole and ark running before I upgraded to -current.
I wanted to upload a powerpoint presentation to ..... but apparently it needs to be converted to a video format first.Does anybody know of a linux based free software that can help me achieve the purpose please?here seems to be a few on the net but they are for sale. I'm afraid I am not ready to spend for this particular feature at the moment
View 1 Replies View RelatedI was looking for a descent powerpoint presentation software for Linux. I am seriously not bugged up with openoffice presentation tool. I am not looking for Microsoft Office or Apples's iWork.
View 3 Replies View RelatedAll I'm trying to do is ShellExecute a program every time a new slide appears.
I'm using Office 2003 Powerpoint.
I did the following:
1. Tools, Options, Security Options, Macro Security, Security Level= Medium
2. Tools, Options, Macro, VBA Editor:
Code:
Sub OnSlideShowPageChange(ByVal SSW As SlideShowWindow)
MsgBox ("OnSlideShowPageChange")
End Sub
3. File, Save
4. Back to PowerPoint: F5) Slide Show, View Show <= Did NOT see the message box
5. Exit out of Powerpoint, reopen the .ppt file, F5) again <= Still don't see the message box
why isn't "OnSlideShowPageChange" getting invoked when I run the slide show?
I've created a presentation as a series of .png images, one per slide. What is a good way to convert these into a .ppt (PowerPoint) that I can give to some audio-visual person? I'm entirely on Linux, with no Windows or Mac software available.(Or maybe PowerPoint isn't the only game in town for presentation file formats?)
View 4 Replies View RelatedI have started using linux again and the programme that used to come with Suse back in 2003 was called "open office" since this is 2011 and im now using Ubuntu which suits me much better I need a word processor that can support .doc or create files that I can then open and edit with Microsoft word in university. Is there any word processor out there that sounds like what im looking for?
Lastly I also need atleast a PPT viewer to see my lecture slides and a program that can make powerpoint presentations or can be used and edited with Powerpoint would be great for my presentation work.
I have a MS Access database I would love to able to use in OOo. How do I do it
View 2 Replies View RelatedI do a clean install of slackware64 13.1 beta1 with KDE and switch default runlevel to 4 in /etc/inittab.
I try to login in kdm, I always come back to the login....
I try this with default runlevel 3 and an .xinitrc with "ck-launch-session startkde" .. works without problems, so I switch back to default runlevel 4, now i can login and only get the error "Cannot open ConsoleKit session: Unable to open session..."
Here are some logs
syslog
Code:
Code:
I work for a company that makes portable devices running Linux and I was recently asked to make the underlying file system read-only for "security" purposes. Since the distribution is based on LinuxFromScratch, I know that very little writing happens at run time. So, even if the device runs on a usb flash device, I doubt that putting the root file system RO will be that beneficial. I am actually more concerned about a process actually breaking because it cannot open a file in RW mode than a process going rogue and filling the root file system with log files, etc. I'd really like to ear what kind of advantages disadvantages there really is with read-only file-systems.
View 6 Replies View Relatedthere are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory
View 1 Replies View RelatedI downloaded the demo of Penumbra Overture, it is a .sh file (113Mb). I can't open the file. In a terminal I ran chmod +x PenumbraOvertureDemo-2553.sh and then sudo ./PenumbraOvertureDemo-2553.sh and I get an error "./PenumbraOvertureDemo-2553.sh: 2: Syntax error: "(" unexpected" . The quotation marks are my own. Is the file corrupted? One of my lugmates thinks it might be a shar file, but Karmic says that it is a shell script. Another friend says that it is too large to be a shell script. Here is the code:
john@john-laptop:~$ cd /home/john/00
john@john-laptop:~/00$ chmod +x PenumbraOvertureDemo-2553.sh
john@john-laptop:~/00$ sudo ./PenumbraOvertureDemo-2553.sh
[code]....
When running the beta of blender 2.5, I get the following error. blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory In previous versions of ubuntu you could 'apt-get install python2.5' to resolve the issue, but it doesn't appear in any/all of the repositories. where I can get python2.5 for lucid-lynx?
View 1 Replies View Related
