apparently .xz files aren't readable by Ark, but I need my computer to be able to read it in order install a package. Does anybody know how or what I can do to allow my computer to read .xz packages?
View 10 RepliesI get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I tried to upgrade my slackware xfce 13.0 >> 13.1. I read "man slackpkg" first, and then I did exactly what I read at the man pages, my system was in init 1 mode.
The mirror I used it was the Greek mirror for 13.1. The command slackpkg upgrade-all was running ok until the "r" letter after that all packages did not upgraded because it was ERROR CHECKSUMS.md5 to all of them. Slackpkg did not upgrade all this packages but just check them and them skip them.
When everything stopped I reboot but at loading time it stops and I have this message: "libuuid.so.1:cannot open shared object file: No such file or directory."
After that I have 2 options to press control-d to reboot or to give root pass and login as root@(none):
After I login I cant connect to internet, I cant shutdown the system only reboot it from cl, I even cant go to init 1 or anything else. I dont know if I can fix the problem but I have to try...
Code:
bash-4.1$ konqueror
konqueror: error while loading shared libraries: libfam.so.0: cannot open shared object file: No such file or directory
I have just installed SABnzb application in my home folder. The executable file is SABnzb.py When I run the command in the Konsole # python SABnzb.py I have this Quote: python: can't open file 'SABnzbd.py': [Errno 2] No such file or directory
View 5 Replies View RelatedI just installed Alien Bob's HandBrake package and am getting a ton of warnings:
Code:
bash-3.1$ ghb
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstmpeg2dec.so': libmpeg2.so.0: cannot open shared object file: No such file or directory
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstsndfile.so': libsndfile.so.1: cannot open shared object file: No such file or directory
[Code]...
I've been building a minimal Slackware system with a small number of packages installed (following this article of ). But now I'm facing a problem with a library call 'libmpfr' when installing the package 'pmount'. I have tried installing libmpfr from source but the installation also REQUIRED libmpfr. Code: error while loading shared libraries: libmpfr.so.1: cannot open shared object file: No such file or directory.The only solution I could come up with is to look for a precompiled libmpfr so that I can install it using installpkg. But nowhere could I find it by now.
View 2 Replies View RelatedWhat is the issue with slackware to open a *pps powerpoint file.I use Slack32.13Can't find any application in standard.Is there something in the slackbuils ?Don't want to install the whole Office
View 3 Replies View RelatedHow do i per say open a file with like transmission when i am downloading it from the internet it says open with then you click it on firefox and it goes to root. Where do i find the files for opening a program instead of saving and going into the program and opening it that way?
View 4 Replies View RelatedCode: mplayer: error while loading shared libraries: libcdda_interface.so.0: cannot open shared object file: No such file or directory
View 5 Replies View RelatedI'm running Slack 13 and trying to get my CAD suite to get going. But with little luck so far. It's built from source, gotten directly from the project page (unavailable at this time)[URL]. This is what I get when trying to run:
Code:
bash-3.1$ gerbv
gerbv: error while loading shared libraries: libgerbv.so.1: cannot open shared object file: No such file or directory
bash-3.1$ locate libgerbv.so.1
/home/wed/gedagaf/gerbv-2.3.0/src/.libs/libgerbv.so.1
[code]....
I've encrypted the /home partition. I've been successful in doing this by following the instructions here:slackware64-current/README_CRYPT.TXTBut after upgrade to cryptsetup-1.2.0-x86_64, when I boot up I get 'no such file or directory while trying to open /dev/mapper/crypthome'I have to manually type 'cryptsetup luksOpen /dev/sda9 crypthome' and mount each time to get into the encrypted partition.I expect to be prompted for the password on boot but I just get that error, what is wrong?my config files:
/etc/crypttab:
crypthome /dev/sda9
/etc/fstab:
[code]....
I am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
Code:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
[Code]...
I always have a problem in simple user mode when I insert a USB key. Can't mount, can't open with file manager. I'm obliged to open a simultaneous root session, to do what I want to manage the usb key.
In my user manager, I don't know wich group I have to add to this simple user (it's me) so I am allowed to manage the usb key.
Since slackware 13.0 (upgraded to 13.1), I haven't been able to print anything. I can add printers no problem using the cups gui (or whatever). However any print I send to any printer fails because of:
"Unable to open image file for printing!"
I can post the whole error log if that helps, but I can't see much in it. I haven't been able to print for about 6 months, which is getting a bit annoying.
p.s, as a I lazy option I upgraded to the cups in -current, but that didn't help (although I don't think it was a very different version).
After finally getting my wireless/graphics drivers working yesterday (thanks to this forum ) I startx to realize that not a single KDE/Qt application will launch, along with Firefox, or Chrome/Chromium. (I did a full install from the DVD, not deselecting anything, and when I upgraded to -current, I also did the same.)
Ark said:
Quote:
ark: error while loading shared libraries: liblzma.so.0: cannot open shared object file: No such file or directory
but I managed to fix that one by commenting out 'aaa_elflibs' in /etc/slackpkg/blacklist (on a recommendation from #slackware), and running slackpkg upgrade-all again, but that's the only one (afaik) that was fixed. Ark still doesn't work, but it doesn't show that error anymore. When I run it, a box pops up that says "Unable to find Ark's KPart component, please check your installation."
Kate still says:
Quote:
kate: error while loading shared libraries: libkemoticons.so.4: cannot open shared object file: No such file or directory
Now, konsole, firefox, and Chromium's errors are a little different.
Konsole:
Quote:
konsole: symbol lookup error: /usr/lib/libphonon.so.4: undefined symbol: _ZN9QMetaType15registerTypedefEPKci
Firefox and Chrome basically say the same thing
Quote:
/usr/lib/firefox-3.6.13/firefox-bin: symbol lookup error: /usr/lib/mozilla/plugins/skypebuttons.so: undefined symbol: _ZN9QListData11detach_growEPii
again, I am completely baffled here, as I had kate, konsole and ark running before I upgraded to -current.
I have a MS Access database I would love to able to use in OOo. How do I do it
View 2 Replies View RelatedI do a clean install of slackware64 13.1 beta1 with KDE and switch default runlevel to 4 in /etc/inittab.
I try to login in kdm, I always come back to the login....
I try this with default runlevel 3 and an .xinitrc with "ck-launch-session startkde" .. works without problems, so I switch back to default runlevel 4, now i can login and only get the error "Cannot open ConsoleKit session: Unable to open session..."
Here are some logs
syslog
Code:
Code:
I work for a company that makes portable devices running Linux and I was recently asked to make the underlying file system read-only for "security" purposes. Since the distribution is based on LinuxFromScratch, I know that very little writing happens at run time. So, even if the device runs on a usb flash device, I doubt that putting the root file system RO will be that beneficial. I am actually more concerned about a process actually breaking because it cannot open a file in RW mode than a process going rogue and filling the root file system with log files, etc. I'd really like to ear what kind of advantages disadvantages there really is with read-only file-systems.
View 6 Replies View Relatedthere are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory
View 1 Replies View RelatedI downloaded the demo of Penumbra Overture, it is a .sh file (113Mb). I can't open the file. In a terminal I ran chmod +x PenumbraOvertureDemo-2553.sh and then sudo ./PenumbraOvertureDemo-2553.sh and I get an error "./PenumbraOvertureDemo-2553.sh: 2: Syntax error: "(" unexpected" . The quotation marks are my own. Is the file corrupted? One of my lugmates thinks it might be a shar file, but Karmic says that it is a shell script. Another friend says that it is too large to be a shell script. Here is the code:
john@john-laptop:~$ cd /home/john/00
john@john-laptop:~/00$ chmod +x PenumbraOvertureDemo-2553.sh
john@john-laptop:~/00$ sudo ./PenumbraOvertureDemo-2553.sh
[code]....
When running the beta of blender 2.5, I get the following error. blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory In previous versions of ubuntu you could 'apt-get install python2.5' to resolve the issue, but it doesn't appear in any/all of the repositories. where I can get python2.5 for lucid-lynx?
View 1 Replies View RelatedI was looking to download "America's Army" and was doing alright until I hit a slight snag, It had an error while loading libgtk1.2, so I scoured the Internet for a way to fix this and the find command I found just told me it couldn't find the package, this is the first error I got when I tried to uncompress the "America's Army" version I downloaded:
/home/zac/.setup3597: error while loading shared libraries: libgtk-1.2.so.0: can not open shared object file: No such file or directory.
When i open any .pps file with OO.org (impress), it starts a slideshow and it doesn't let me edit the file. If i click on "end slideshow", the program exits.i ran it in a terminal and there's no error messages.[EDITED]Well, i found the answer, just renaming it to ".ppt".
View 2 Replies View RelatedI followed [URL] that thread for installing BitPim on 10.04, but am getting this error:
Quote:
Traceback (most recent call last):
File "/opt/cx_Freeze-3.0.3/initscripts/ConsoleSetLibPath.py", line 35, in <module>
File "src/bp.py", line 20, in <module>
File "src/bp_cli.py", line 21, in <module>
[code]....
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
after updating my system I can't start VirtualBox-OSE anymore. I get the error:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I try to remove and to re-install VirtualBox-OSE again, still the same error. VirtualBox works as root but not from a user account. The installed version is VirtualBox-OSE.i686 3.2.6-2.fc13 @rpmfusion-free-updates
I am trying to run Ansys on Fedora (64bit), but every time I do it gives me this error. "error while loading shared libraries: libXm.so.3: cannot open shared object file: No such file or directory"Please help as I am stuck with this issue for long.
View 6 Replies View RelatedI'm trying to use a software on OpenSuSE 11.3 (64) and am getting an error message similar to the one in the title. I did a bit of background reading on libjpeg.so.62 that the program was asking for. I noticed that I had a file called libjpeg.so.8 in my /usr/lib/ folder. I found a libjpeg.so.62 file online, downloaded it and copied to to my /usr/lib folder, but its not making any difference.
View 1 Replies View RelatedHow can I check and set who can view or open a given folder or file?
View 1 Replies View Related