Slackware :: Namespace Error : Failed To Parse QName 'xml:'
May 12, 2011
My only problem with Slackware 64 13.37 is that Crossover Linux doesn't seem to install correctly. It claims successful installation, but several lines of these errors occur:
Code:
Use of "goto" to jump into a construct is deprecated at /home/x/cxoffice/lib/perl/XML/SAX/PurePerl/Reader/Stream.pm line 56.
/home/x/.local/share/mime/packages/cxassoc-cxgames-0.xml:6: namespace error : Failed to parse QName 'xml:'
[code]....
Then, when I try to restore certain cxoffice "bottles," I get the following messages:
Code:
Unhandled exception
or
Code:
wine: Unimplemented function user32.dll.DialogBoxParamW called at address 0x7b8402f9 (thread 00f2), starting debugger... Everything worked fine in Slackware64 13.1.
View 6 Replies
ADVERTISEMENT
Oct 6, 2010
I have just installed openSUSE 11.3 and enjoy using MonoDevelop , and I tried to use XML Serialization in C# : The Help shows the following code for XML Serialization :
C# Example
// Simple XML serialization
using System;
using System.IO;
using System.Xml.Serialization;
public class MyObject {
[Code]...
but when tried the same code the error was : /home//Projects/xmlTest/Main.cs(14,14): Error CS0234: The type or namespace name `Xml' does not exist in the namespace `System'. Are you missing an assembly reference? (CS0234) (xmlTest)
View 1 Replies
View Related
Nov 5, 2010
what this means? installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... dpkg: parse error, in file '/var/lib/dpkg/status' near line 11756 package 'vinagre': `Depends' field, reference to `libgconf2-4': version contains ` ' I get it while trying to update my computer.
View 2 Replies
View Related
Apr 1, 2011
It seems my laptop (an Acer Aspire One AOA150) runs out of MTRRs at boot. I've done some googling on the problem and read that people recommend turning on MTRR sanitizing to fix it, however, it still occurs. I'm running Arch Linux (but that shouldn't matter). You can see that I have enabled MTRR sanitization here:
[chris@helios ~]$ zgrep 'SANITIZER' /proc/config.gz
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
Here is my relevant system info:
uname -a:
Linux helios 2.6.38-aao-light #1 SMP PREEMPT Fri Apr 1 03:02:37 BST 2011 i686 Intel(R) Atom(TM) CPU N270 @ 1.60GHz GenuineIntel GNU/Linux
dmesg potential warnings:
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.157222] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143)
[code]....
View 2 Replies
View Related
Apr 5, 2010
When I try to save my X configuration file.. it says "Failed to parse existing X config file '/etc/X11/xorg.conf'!"
I've already deleted my current xorg.conf and created a new one using sudo nvidia-xconfig and run NVIDIA X server settings using gksudo nvidia-settings but still can't save..I am using 32-bit Ubuntu 9.10 and my video card is NVIDIA FX 5500..
View 9 Replies
View Related
Feb 17, 2010
With opensuse11.2 I am getting following error while running openGL apps: drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info. I think this is problem with radeon drivers. Is there solution to this?
View 6 Replies
View Related
Feb 5, 2010
since i reformatted my new hard drive i have been having issues saving my config file when i tried to save to x configuration file it says: Failed to parse existing X config file '/etc/X11/xorg.conf'.i used to be able to open the file as root and copy over the old x config with the new one but it wont let me even preview the changes until i click save to x configuration file. anyone know how i can fix this error? i tried uninstalling and that didn't help.
View 2 Replies
View Related
Apr 14, 2010
I have a thread started on the Slackware forum about the possibility of installing Slackware on an older P4 laptop. Well, it installed fine and most things are working, but I am experiencing one problem that I need to solve before I progress to working on other things.
I hope the mods will not consider this a double thread because it is a networking issue and the other thread was started about a different subject, and I thought there might be more networking specialists there (though everyone I meet on the Slack forum is very knowledgeable, this one has not been solved.)
I am trying to connect wireless with an RT2500 chipset, the correct module loads and the machine is connected to the network, but with a "failed" IP address (169.254.167.101). This also occurs with a wired connection. The exact error is:
Code:
err, wlan0: option 43 has zero length
failed to parse packet
It times out then assigns the failed IP address and connects to the network, but of course nothing works.
I use WPA psk and I have another laptop with the same configs and works perfectly with Slackware -current, so I followed the same routine to set this one up. When that didn't work, I backed up the existed /etc/rc.d/rc.inet1 and wpa_supplicant.conf, and copied the working files to the new setup. Same result.
There does not seem to be any information about this error either here on LQ, or on the net. I have certainly never encountered it before.
Because it connects with good signal strength, and because it also occurs with wired connections, I can only assume that it is related to WPA in some way. I have not reset the router because I have a number of other machines connected. All of the other machines work, and this one connects, so it is not hardware related.
View 14 Replies
View Related
Nov 11, 2009
I am trying to connect to our work server (windows), however, without succes In the log I get the message: "Failed to parse server response"
And when I close the vpn connection window I get "there were no valid vpn secrets"
I Use F10 with xfce on an aspire one.
View 2 Replies
View Related
Feb 2, 2011
I have a new server with AMD Opteron (first time, other server has intel) and slackware 13.1 32 bit installed.
kvm (qemu-system-x86_64) did not start with this error:
kvm: vm entry failed with error 0xffffffff
kvm_run returned -22
Got new kernel from slackcurrent (2.6.35.10) and rebuild qemu tools (qemu-kvm from SlackBuild).
Now kvm starts but I have another issue:
The virtual machine (I take a working image from another server) starts, shows the initial lilo message, "Loading linux ....", "BIOS data check succesfull ..." and then hungs with a black screen.
The command line is:
/usr/bin/qemu-system-x86_64 -hda /tmp/elezioni-ter.qcow2 -m 512 -localtime -k it -vnc 10.2.0.39:1
If I add the '-no-kvm' at the command line the vm boots ok.
View 14 Replies
View Related
Jun 14, 2011
Parse error: syntax error, unexpected '@' in C:xampphtdocsminippromail.php on line 8 .......its not recognizing the '@' symbol. heres the code im working with
<?php $receiver = myfriend@ourmail.co.in; $subject = wish; $content = Hi! My dear friend how are you.; $sender = myself@ ourmail.co.in ; $headers = From: $sender; mail($receiver,$subject, $content,$headers); echo Mail has been sent successfully.; ?>
View 1 Replies
View Related
Mar 3, 2010
I am using Gslapt version 0.5.2b with slapt-get 0.10.2c and when I try to update I get this error message.
Code: Failed to download: FTP: couldn't retrieve (RETR failed ) the specified file. I have tried http ones also but get the same message except instead of FTP: it is HTTP:. Is anyone else having this problem? Are the repositories experiencing difficulties? Is my personal system to blame? Am I an idiot?
View 14 Replies
View Related
Mar 10, 2010
when i upgraded to slackware-current few days ago i tried to create packages with src2pkg and i get this:
Checking for Makefile rule: 'install' Okay
Checking support for DESTDIR (or similar) - Found DESTDIR
Installing using DESTDIR - Using:
make DESTDIR=/tmp/xf86-video-intel-2.10.901-i486-1 install
Notice - Possible error running 'make install'
FATAL! Running make install has failed with error: 1
Try using INSTALL_LINE 'make -i install' Exiting...
is it because of i have slackware 32bits i installed src2pkg successfully on slackware 13 but on slackware-current if i remove it and do src2pkg --setup i get error something like cannot live without it every time. when wanting to create src2pkg-helpers.
but i want to know what im doing wrong ?
before i created packages successfully. i execute src2pkg as root
View 14 Replies
View Related
Jul 7, 2011
This is an error I got from VLC Media Player:
Streaming / Transcoding failed:
It seems your FFMPEG (libavcodec) installation lacks the following encoder:
MPEG Audio layer 1/2/3.
If you don't know how to fix this, ask for support from your distribution. This is not an error inside VLC media player. Do not contact the VideoLAN project about this issue.
It said not to contact VideoLAN, but instead the Distro so...here I am. Was there a file I should download in order to fix this? If there is one, where do I place it or run it to stop this error?
View 2 Replies
View Related
May 24, 2010
When using geeqie to browse a directory with .CR2 and .JPG files, the last pair of .CR2/.JPG is not shown in the list (on the left side of the UI). Moreover, after a few operations (PgUp/PgDn, etc.), I get:
Code:
**
ERROR:filedata.c:676:file_data_free: assertion failed: (fd->sidecar_files == NULL)
Aborted
View 1 Replies
View Related
Sep 22, 2010
I have 3 accounts setup on this machine. One is root, one is my own, and one is for my kids. My account and root work fine, but today when I tried to log my kids on, startx fails (it also fails from runlevel4). I have tried creating new accounts and they fail as well. I'm not sure when the issue started, but it's been less than a week I believe. The consistent error which I receive is
Quote:
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config. Fatal server error: Failed to activate core devices.
View 3 Replies
View Related
Mar 31, 2010
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
View 4 Replies
View Related
Jan 20, 2011
I am novice. I am trying to create one email form. But i am getting "Parse error: parse error in F:estwampwwwsendmail.php on line 43"
Code:
<?php
if(isset($_POST['email'])) {
[code]....
View 3 Replies
View Related
Jan 15, 2011
I have installed torcs (using sbopkg) and the dependencies plib, OpenAL, and freealut. On running it I get
Quote:
GLUT: Fatal Error in torcs-bin: failed to create OpenGL rendering context.
I am not sure if it is relevant but this is xorg.conf
Quote:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Tue Jul 28 19:48:57 PDT 2009
Section "ServerLayout"
[code]....
View 9 Replies
View Related
Sep 18, 2010
When I tried to upgrade my xubuntu 10.04 , I got this error
dpkg: parse error, in file '/var/lib/dpkg/available' near line 2 package 'x11proto-core-dev': value for `status' field not allowed in this context E: Sub-process /usr/bin/dpkg returned an error code (2)
View 5 Replies
View Related
Apr 19, 2010
I have a basic HTML file set up which allows my to input some data. I have a MySql database set up behind the scenes with a table for this information to go in. When I click the submit button in my HTML file this PHP file opens and it comes up with "Parse error: parse error in C:wampwwwcomp39xinsert_student.php on line 32"Here is my code I am using in the PHP file:-
<html>
<head>
<title>COMP 39x FInal Year Project - Student Added?</title>
[code]....
View 2 Replies
View Related
Mar 2, 2010
I looked for a solution to this,and found a thread for it ,but I dont know how to do what it says.Here is part of it by the user "cameronol": There is a bug in Ubuntu 9.10 Karmic with the default /etc/X11/xorg.conf involving Nvidia. receive the error"Failed to parse existing X config file '/etc/X11/xorg.conf'.Then he posts:
[Code]...
Then he says to delete the first section with the default screen,and it will be fixed.But HOW do I look for the /etc/X11/xorg.conf file to edit it,and how do I edit it?I am new to ubuntu,but I have learned to use a terminal(I think)It seems to be just like the "run" box on Windows.I did a search for the file,but came up empty.I want to fix this cause every time I restart,I have a low resolution that is impossible to work in.
View 2 Replies
View Related
Nov 22, 2010
I have a system with 2 hard drives (Ubuntu 10.10 and Windows XP) on them. Grub allows me to select which system to boot to.
Ubuntu 10.10 has stopped working (not loading gnome graphical interface) for some reason.
I can boot to a command line (after many errors on screen). When I try the command "gnome-terminal" I get: "Failed to Parse Arguments: Cannot open display:"
View 14 Replies
View Related
May 22, 2010
I successfully installed ubuntu but I cant install its updates, heres the prob:
dpkg: parse error, in file '/var/lib/dpkg/available' near line 19410 package 'initscripts': missing version
View 2 Replies
View Related
Sep 3, 2010
I killed a stalled apt-get safe-upgrade, which left lock-files on my system. I followed this guide to clean it up:
http://ubuntuforums.org/showthread.p...highlight=lock
and have done the following:
sudo rm /var/lib/dpkg/lock
sudo rm -r /tmp/*
now, when I try:
sudo dpkg --configure -a
i get: dpkg: parse error, in file '/var/lib/dpkg/updates/0006' near line 0: newline in field name `#padding'
the file var/lib/dpkg/updates/0006 contains nothing but lines of '#padding'
System: Freshly installed 10.04 64bit, 2.6.32-21-generic
View 2 Replies
View Related
Jul 19, 2011
I'm trying to define a variable, CHAN, by dividing another variable, FREQ, by a number. FREQ is a value from a file (called header.txt). What I think I'm doing with this bit of code is reading a number from header.txt whose location is specified by the head and tails, assigning it to FREQ and then defining CHAN with bc.
Code:
#!/bin/bash
while read FREQ
[code]....
View 2 Replies
View Related
Jan 27, 2011
I'm creating a comment form for a website but when I try to connect the page with a database it gives me a parse error. here are the codes I wrote:
[Code]....
View 1 Replies
View Related
Aug 8, 2010
when i try to use apt an error occurs: dpkg: parse error, in file '/var/lib/dpkg/status' near line 27317 package 'virtualbox-3.0': error in Version string `3.0.4-50677_Debian_lenny': invalid character in revision number E: Sub-process /usr/bin/dpkg returned an error code (2)
i tried to :
1- replace the file status with status-old
2- replace it with all the backups located in /var/backups/
and the same error occurs
View 4 Replies
View Related
Sep 2, 2010
Kindly take a look at the code below :
Code:
#include <stdio.h>
struct test
{
int i;
int j;
[Code]....
why i am getting this error. I know the error is occuring because i have assigned values to obj.i and obj.j outside main(). But i want to know why do that result in an error. From my part i have created an object 'obj' of stucture 'test' and assigned values to its variables.
View 7 Replies
View Related
May 15, 2011
I am playing around with a new chat program and I have errors that I can not figure out. Here is what I am getting.
parse.c:1638: error: dereferencing pointer to incomplete type
parse.c:1638: error: dereferencing pointer to incomplete type
parse.c:1638: error: dereferencing pointer to incomplete type
here is the code:
if (scan->jail_timeout == 0 && scan->location == prison)
{
command_type |= HIGHLIGHT;
tell_player(scan, " After serving your sentence you are flung out"
[code]....
View 6 Replies
View Related
