Since yesterday we need to have oauth authentication to login to Twitter. I have compiled qoauth and then qwit and choqok but I'm not able to use both. I'm having issues with oauth I could'n solve. Qwit gives this message "Error while trying OAuth!" and Choqok "Authorization Error: Timeout on server".
View 11 RepliesIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedI have installed vnc-server on my CentOS 5.6 virtual machine. I can connect to it with a java web browser so it seems to be working. However, I get the following error message when I start, stop or restart the vnc-server process. Quote: Starting VNC server: 1:ken xauth: timeout in locking authority file /root/.xauthkk661q
View 5 Replies View RelatedSomething go wrong with php and Apache, at first, the $GLOBALS array is looking like this
Code:
Array
(
[code]....
One person using our DNS servers reported a very curios problem. When he tries to access [url] he gets a timeout error. I tried loading the site using chrome, firefox and ie8 and I get the same results.
Here is what dig gives me:
If I use google DNS I get the correct response:
Just an FYI for anyone who may be having this particular problem. A short while back, I was trying to attach a picture to a Twitter post, and dropped my network connection. No big deal...connection came back, and things went on. Next time I launched Choqok, it popped up a message saying "Server Error: This method requires authentication". It was puzzling, and didn't appear to impact my use...until I went to send a direct message, and it would give that error and crash. After quitting Choqok, the file (/tmp/ksocket-user/klauncherXXXXXX.slave-socket file) was still present. Deleting that file manually cleared the error up. I've seen this mentioned in a couple of other forums, but none with a solution posted.
If anyone else has that error, and this method resolves it, please let us know. I'm using openSUSE 11.4, but it should apply to any version/distro of Linux using Choqok.
type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 4 Replies View RelatedI'm running sendmail 8.14 which sends out thousands of email. I'm getting several timeout error on only a few particular hosts. What I found is almost all of them are Exim 4.69
maillog shows
--> timeout waiting for input from ..@xxx during client greeting
after several tries, I finally got bounce back with
--> 451 4.4.1 reply: read error from xxx.com.
.. Deferred: Connection timed out with xxx.com.
Message could not be delivered for X day
Message will be deleted from queue
When i search though maillog with all of those error and they all seems to be running Exim and they are different mail domains.
I'm attempting to install Webmin in Endian I download the tar.gz file and ran setup.sh and it says it is installed, however it doesn't let me go to the webpage it says. I get a timeout error. I'm using the current version of endian and webmin.
View 4 Replies View RelatedI have multiple computers set up in my home (self education on networking) with one used as the main machine, and the others set up as a variety of server types. The main machine is running Lucid, as gui based os. The others are all running the server version. NO Domain controller is installed, no DNS server is installed.
ALL of the server machines boot to a login prompt, allow user name and password entry, and then will fail to login with a timeout error. After anywhere from 8-15 tries, the login will eventually succeed. Error also occurs when logging in via ssh.
I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110602 18:28:14 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
[Code]...
When I login into my normal user account under runlevel 3, the following error message is printed to the screen:
Warning: add_groups: Invalid Argument
I'm not sure where this is being generated. I don't see the same error message when I login using root.
Having not used Clive in over a year I went over to [URL]... and downloaded, built, and installed both Clive and URLgrabber. Here is error message when I tried to run Clive,
[code]...
When I start acroread (and as far as I can tell it's only that program), I get the error message
But the program still starts, no problem. Happens with both
I am currently running slackware 12.2 on a 25 GB partition. I like to use slackbuilds, but when I try to compile larger tarballs (like abiword, or a patched version of Ghostscript as I did today) I receive an error-message: 'Not enough space left on device'. I think the size of the partition must be big enough (I never got this message when compiling with Linux From Scratch). I think it has something to do with the size of my /tmp directory, but I don't know how to fix this. Is there a way to solve the problem, so that I could be able to use slackbuild-scripts?
View 4 Replies View Relatedafter install slackware with gnome using gnome slack build it is work fine Except some thing :-
the volume it is not work and get this error ((The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu.
No volume control GStreamer plugins and/or devices found.)) and the System Monitor give me this error when i want check the state of memory and processor ((There was an error executing 'gnome-system-monitor': Failed to execute child process "gnome-system-monitor" (No such file or directory)) and the memory flash not work and give me this error ((Error org.freedesktop.DBus.Error.AccessDenied.))
We had a perfectly working SUSE OES netware server for some months, and wanted to create a new image backup. Using Acronis Backup and Recovery Advanced Server Software. This worked a treat on our SBS 2008 Server. We went to run it for Novell OES and a system lock up occurred and services such as Iprint then disabled. A server restart recovered the server after a few attempts. We then learnt that the server could not write files to an NTFS formatted USB drive. This was the ideal destination to test the backup. However we could not even write a simple file to the drive without an error message about permissions.
We then learnt that Linux needs a package called NTFS-3G to enable NTFS writing permissions. This did fix the writing issues. We attempted to run another back up which again failed, bringing down the server. We again attempted to reboot the server this time we fail to get to the graphical user login. At the suse Linux Enterprise boot screen we select "boot from hard disc". Which fails immediately with "GDM could not write a new authorisation entry to disk...Error no space left on drive". When the boot eventually continues, a number of things fail with the same message about "No space left on device".
The next message starts "Could not start the X server due to some internal error."
Further to the above, starting "recovery" instead, the checks of partition fail and it seems obvious that the partition definitions have become corrupted. In the expert partion manager the lines for partitions seem correct except that there are no entries for 'mount point' and 'mount by' columns. Trying to edit these lines does not appear to allow entries for mount point or mount by - they are disabled. It seems likely the server is not mounting some partitions at boot which is why the kernel thinks the server is full. Is there some simple way we can use say fdisk to repair the partition definition without loosing anything of the server OS and data ?
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies View RelatedOur websever, Linux Debian with mysql, apache2, php 5 went down this saturday. Now this monday morning i must find out why this happened. I am looking for the the correct log files. We know that the server was available by using ping so it is (was) an application failure. We know that the our apache support team had changed the php to improve performance to apc.shm_size=192M (a couple a weeks ago) because couple a weeks ago we got a "Unable to allocate memory for pool" error message. Our server is running on a Vmware Server version 3 as virtual machine with sufficient CPU and RAM resources. Where and which log files must be checked to avoid future download times (it is our Company web page!!!!)
View 5 Replies View Related[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
I have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies View RelatedI'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies View RelatedI'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies View RelatedWhen I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies View RelatedGreetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedStarted slackpkg upgrade-up and went to bed. Woke up to find the power had gone out during the night. The computer booted up, but displayed a message that said something to the effect of, "Error occurred during root file system check. You will be given the option of doing maintenance......"I can get to a command prompt, but regardless of what I do a message pops saying it can't find libblkid.so.1
View 14 Replies View RelatedI installed fedora 11 and configured xdsl(pppoe). I then performed an upgrade and installed some apps. Internet still worked before the restart.After that even though i could activate the device, i cannot view websites. I get a server not found error message. I have tried using both firefox and konqueror. Internet works in windowsIs this due to the upgrade? If so which upgrade would have caused the error?How do i resolve it
View 4 Replies View RelatedMy redhat advance server got error no.15 message
View 1 Replies View RelatedI have configured a Nagios server which is working well with all king of clients. But when I added a new windows machine to monitor, it gives a error message "connection refused". I have set everything as prior machines.
Now, I just wanted to know the process by which we can check if server is able to communicate with the client's NSclient daemon. In Linux, we simply issue "./check_nrpe -H hostname" and if ok, it gives the NRPE version which indicates the status ok.
I am trying to share files between Windows XP machine, ubuntu server, debian server and ubuntu desktop. But mainly between ubuntu server and Windows XP computer.I also like to learn samba, because probably I could do all this with ftp server as well.I set up and configured samba following the instruction on Online Ubuntu Server Guide.But when I run the command:sudo /etc/init.d/samba restartI get:bash: /etc/init.d/samba: No such a file or directory I don't know what is wrong?
View 9 Replies View Related