Slackware :: Installing The Eee-control On 13.1?

Nov 2, 2010

is it possible install on slackware ?

[URL]

View 4 Replies


ADVERTISEMENT

Slackware :: Thinkpad T500 Fan Control - Way To Control ?

Jun 2, 2010

I have had my thinkpad for just a few short months and, it must be that we are heading into summer, but I am starting to finally run into some overheating issues especially when compiling software for awhile, i.e. kernel.

My question would be, "Is it best to let the built in thermal management take care of the issue, and I just need to know what to tweak, or to put on a script solution such as the tp-fancontrol script?

The computer takes about 5-10 minutes to overheat and the message I get in /var/log/messages is "logger: ACPI group thermal_zone / action THM1 is not defined" then it shuts down.

So, any pointers in the right direction would be appreciated.

I am running slackware-current x86_64 on a Lenovo Thinkpad T500.

View 8 Replies View Related

Slackware :: GSB Volume Control

Jun 9, 2010

I've installed 13.1 and the new GSB. I like it a lot (better than old versions), but the volume applet doesn't work.I did some reading and apparently this is due to a conflict between the GNOME people and the Pulse Audio people. So I was wondering if it was at all possible to use the xfce volume applet.

View 10 Replies View Related

Slackware :: Volume Control In KDE

Feb 18, 2010

Newbie slackware user here, I'm having some issues getting keyboard volume control to work properly.I recently fixed my network adapter problem and I managed to get flash player installed despite my minimal knowledge of linux and slackware, but there's yet another small glitch that I can't fix.When I'm logged in as root, keyboard volume controls work perfectly, mute mutes the audio + increases the percentage, - decreases the percentage, etc.However, when I'm logged in as another user and I try to use keyboard volume controls, the bar will pop up in the middle of the screen, but it will be stuck at 0% no matter that I do. (Sound still plays though, it seems that volume is at 100% while the bar in the middle reads 0%).

View 1 Replies View Related

Software :: Installing Tcng For Traffic Control

Mar 21, 2011

tcng for linux traffic control. I have done all the steps necessary including compiling a QoS ready kernel and still receiving the same error while trying to ./configure

[Code]...

I definitely have bison installed, and I've also tried other packages involving YACC root@mikeypc:/usr/src/tcng# which yacc /usr/bin/yacc which then leads to bison

View 1 Replies View Related

Slackware :: Chassis Fan At Max - No Speed Control?

Oct 4, 2010

I got a new computer and got it running Slackware64-current. It's motherboard is an ASUS M4A88TD-M and it's processor is an AMD Phenom II x4 965. I decided to get some chassis fans to improve it's thermal performance. But, since I started the computer after installing the new fan (only one of the 3 I got) the fan's speed is at max and it's very noisy. I'd like Slackware to control it's speed according to temperatures from lm-sensors. Output of # sensors-detect can be found here. Kernel is stock -current 2.6.33.4. Output of # lspci is here.

Code:
gtl@coruscant:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.31 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.34 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +5.08 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.03 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 2170 RPM (min = 600 RPM)
CHASSIS FAN Speed:3409 RPM (min = 600 RPM)
CPU Temperature: +40.0C (high = +60.0C, crit = +95.0C)
MB Temperature: +32.0C (high = +45.0C, crit = +75.0C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +0.0C (high = +70.0C, crit = +99.5C)

View 2 Replies View Related

Slackware :: Control Which Windows Take Up What Space?

Jan 15, 2010

I started using DWM for my Window Manager really just for the hell of simplicity (I'm an obsessive minimalist) anyways... I can use seamonkey but I do like Firefox more but for some reason it does not load. If from a terminal I type firefox is just simply doesn't load, brings up no errors or anything.

Also, is there a way to control which windows take up what space???

View 1 Replies View Related

Slackware :: Can't Get Control Software To Work

Jan 3, 2011

I'm trying to get a Sans Digital raid set up for Slackware.It uses Highpoint Rocketraid control card. I downloaded and built the module for the driver and finally got it to work with an initrd.The raid is set up and mounts to /media/disk1. The drive seems to be working fine.The problem I'm having is I can't get the control software to work. Neither CLI or WebGui. Has anyone made this work with Slackware?

View 7 Replies View Related

Slackware :: Mp3blaster Volume Control ?

May 3, 2011

I am using Slackware 13.0 quite out of the box, normally I can change volume for every app using alsamixer. As my laptop is a little bit old working in X uses a lot of resources I have been searching for more and more console based apps. With good results until now.

I started using mp3blaster to listen to music. Great app and all. Only problem I have got is that I have difficulty controlling the volume for it. When in alsamixer I can mute the master channel an control Pcm in small increments so that I can speak about control. When using mp3blaster I have got no control whatsoever. Cant mute the vol channel nor can I control the Pcm2 channel in any way.

My questions are: How do I control the volume in mp3blaster? Why do I have Pcm2 instead of Pcm in mp3blaster? What other info would be needed for anyone to push me in the right direction to solve this problem?

View 2 Replies View Related

OpenSUSE :: After Installing KDE Gnome Lost Its Control Over Fonts?

Apr 5, 2011

I recently installed KDE (I was using GNOME). After that, I found for gnome applications, KDE font settings is applied even when I log in using GNOME. Whatever I do in appearance-fonts, all gnome applications follow the settings from KDE Personal Settings. (Application Appearance -> Fonts)

I lost all the subpixel hinting, and I finally just found out that if I set it in KDE Personal Settings it actually affects gnome applications. (I'm in GNOME now)

View 6 Replies View Related

Slackware :: Cannot Control Brightness Settings On Vaio - 13.37

May 11, 2011

I just finished installing Slackware64 13.37 on my Sony Vaio PCG-7153L, and I'm having issues controlling the LCD brightness of the laptop. It still has the stock Slack kernel 2.6.37.6 SMP The brightness controls worked on Fedora 12-14, as well as the Ubuntu 10.04 live disc. I checked /proc/acpi/, but there's nothing in there to control brightness. I reloaded the sony_laptop kernel module, and from dmesg I get:

Code:

sony-laptop: brightness ignored, must be controlled by ACPI video driver From the Ubuntu bug [URL] and the Red Hat bug [URL] it looks like they've already dealt with this problem. However, as I said earlier, my laptop worked fine with Fedora 12-14.I know Slackware does minimal fiddling with the kernel, so I'm thinking this might be an upstream kernel bug...

View 8 Replies View Related

Slackware :: Changing KDE Fonts Without The KDE Control Center?

Nov 16, 2009

when running XFCE, changing the font in qtconfig fails to change fonts in KDE apps such as ktorrent and koffice. This is rather annoying because default KDE fonts are excessively large and blurry on my monitor. Is there any way to force KDE apps to obey qtconfig settings?

View 2 Replies View Related

Slackware :: Control Network Bandwidth Used By Applications?

Jan 18, 2011

I'm looking for a tool to control network bandwidth (per application i.e. totem), something like trickle (a userspace bandwidth shaper).Trickle is a bit outdated, latest ver. 1.0.6 (2003), and it won't compile under -current. There's a slackbuild available, dated 2004.

Quote:
$ make
gcc -DHAVE_CONFIG_H -I. -I. -I. -Wall -Icompat -g -O2 -c trickle.c

[code]...

View 4 Replies View Related

Slackware :: Microphone Control Vanished From Mixer

Aug 6, 2010

Slackware 12.1 on Acer Aspire 5710 laptop.Intel HDA audio.There used to be a mixer control for microphone (or 'Mic'). A few months ago it vanished. The microphone works, but is at a fixed level and always with annoying playback through the speakers. I cannot change the recording level as there is no mixer control.

View 4 Replies View Related

Slackware :: Volume Control Not Work With 940gml?

Jun 2, 2011

I can't change the volume of sound under KDE or XFCE, only mute works, but GnomeSlackBuild, on my notebook. the chipset is 940gml. I saw some post said recompile or reconfigure the ALSA would .

View 4 Replies View Related

Slackware :: Brightness Control Screen Bars Do Not Show Up

Feb 18, 2010

I have searched online with no success. The brightness control is working fine on my laptop. Problem is that the bars don't get rendered on screen. Instead I get like a static white line on screen everytime I press the brightness control. On boot however, I can see the correct bars. It is once I start my xsession, the bars do not show up. Here are my specs:

Slackware 13
Xorg Radeon driver
kernel 2.6.29.8

View 2 Replies View Related

Slackware :: Control Local X Session From Remote Computer?

Dec 31, 2010

I have a slack 64 13.1 box, that I want to be able to control the monitor of from my laptop. Here's the scenario: I can already control the music remotely via X forwarding banshee to my laptop (banshee shows up on the laptop and music comes out on the desktop). Now I want to be able to open a movie on the desktop's display via the laptop.

Now googling this comes up with solutions for X forwarding, but I don't want it to forward X I want it to display on the desktop.

View 3 Replies View Related

Slackware :: Remote PC Control 101: How To Setup Gmail Remotely

Mar 21, 2011

I have never tried to do anything 'remotely'.My 87 year old uncle lives in British Columbia, Canada and I live in Quebec, Canada.Here is what I would like to try to do:

I would like to connect to his PC from my PC and then set up a Gmail email account for him. I think that I am saying that I would like to be 'as if' I were sitting in front of his PC at his house.If this is possible, what software do I need on my Slackware PC to connect to his Windows PC? What software does he need on his PC?

View 6 Replies View Related

General :: Installing Slackware On IDE Hard Rive Boot From Slackware DVD?

Jan 23, 2010

I try to install Slackware to my IDE hard drive and boot first from Slackware DVD. After I loaded huge.s kernel, and tried to partition the hard drive using fdisk by entering "fdisk /dev/hda", I found out that the partition size is max to 3 Gigs instead of 80 Gigs.

I think the kernel is looking at my boot disk, which is around 3 Gigs. How can I make so that it looks at my IDE drive instead at my boot drive? Is there any manual that shows me how to install Linux from scratch this means I want to wipe out all my hard disk and install Slackware Linux there?

View 2 Replies View Related

Slackware :: Installing NVIDIA 256.53 Driver In Slackware 13.1 - Unable To Get It Moved

Oct 9, 2010

I started a thread asking for advice in the hardware forum. I didn't want to post a duplicate thread, but I was unable to get it moved here, so I'm kindly asking you slackers to help me install the aforementioned driver.

View 1 Replies View Related

Ubuntu Installation :: Installing 2 Version But Want To Maintain Grub Control To First Distro?

Jul 1, 2010

I currently have 10.04 installed as my primary OS. I also have windows 7 and Ubuntu 10.10 Alpha installed. I would like to be able to play around with the 10.10 without any risk of damaging my 10.04 install. However, it seems grub2 control was transfered to 10.10. How do I return control to my original distro?

View 2 Replies View Related

Slackware :: System Hang At 'Control Center>Peripherals>Display'?

Sep 23, 2010

spent endless time trying to get multiple monitors going and have had a bit of success -- got two showing just fine. However, when I try to access the page I mention in the title, Slackware hangs hard -- only the red button will get me out. This is recent. I had dual monitors going before and that didn't happen, I think one monitor was at 800x600 and the other at some wide screeen rez. Anyway all by itself the 800x600 decided to go to 1024x768. Now, note that it all shows fine, no issues of any kind on the monitors themselves, xrandr works

View 4 Replies View Related

Slackware :: Installing New Software On Slackware 13 X64 / Especially Python

Mar 26, 2010

I'm now up and running on slackware 13 x64. I have noticed that the version of Python installed was 2.6.2 but there were a lot of bug fixes between this and 2.6.5. What is the best way to get 2.6.5 running on my machine. Do I have to install from source or is anybody aware of any packages that have been released?

Again, I'm not too familiar with package management systems on Slackware as I have always installed from source but this became a bit of a bind recently as updating software to newer versions involved a lot of hard work. Can anybody give me an ideas on the packaging systems available, the best ones to use, and where I can find information about the packages related to the package managers?

View 9 Replies View Related

Slackware :: Installing 13.1 Over Windows XP - Run Slackware And Slackware Only

Dec 19, 2010

I have been given the task to install slackware 13.1 over windows. I have downloaded and copied slackware 13.1 on to a disk, and rebooted the computer, but i am not getting what all the tutorials have shown. I have been looking for tutorials that specifically instruct me as to how to install slackware 13.1 on to a windows xp. I am not trying to dual run I just simply want to run slackware and slackware only.

View 5 Replies View Related

Slackware :: USB Headset - Volume Control On Them Stopped Working - Sound Works - Microphone Doesn't

Oct 29, 2010

When I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".

I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.

Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.

Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.

When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.

Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.

Code:

View 1 Replies View Related

Slackware :: Installing A VM Slackware On RHEL5.5?

Oct 11, 2010

When i install slackware12 on xen,no matter in http or ftp,there is always a error as follows.

[root@lx xen]# virt-install --prompt
What is the name of your virtual machine? slk
How much RAM should be allocated (in megabytes)? 1024
What would you like to use as the disk (file path)? /xen/slk
How large would you like the disk (/xen/slk) to be (in gigabytes)? 10
What is the install URL? http://10.1.71.247/slk

[Code]...

View 1 Replies View Related

Slackware :: Installing Alsa On Slackware?

May 11, 2010

How should I go about installing alsa and making it start on boot?

View 14 Replies View Related

Slackware :: Installing Flash In Slackware 13?

Jan 23, 2010

I'm trying to install the latest version of Flash in Slackware 13 on a 32 bit machine. Adobe seems to have rpm and deb installers, but there's no TXZ. Normally, tar.gz wouldn't be a problem, but the package they have there only contains a shared library. No installation script, no readme, no nothing. Further, the SlackBuild is for an outdated version, and the installation doesn't work.

View 11 Replies View Related

Slackware :: Installing Msttcorefonts In Slackware-13?

Feb 18, 2010

I have a problem with the cyrillic and writing in Bulgarian in text files (In the Pidgin I have not problem). I saw that if I install the windows fonts this will resolve the problem, but I can't find slackware package and even source package.

View 4 Replies View Related

Slackware :: Installing Slackware 13.1 X86_64?

Oct 2, 2010

I have just been forced into upgrading my mother board and cpu so now own a x86 cpu and was thinking i would give the x86_64 Slackware a try. I realize that i need to do a reinstall but can i save my /home partition? Will that save my settings or am i asking for problems? I assume i can just drop all of my config files into the new install as well.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved