OpenSUSE Install :: Fresh Install Of 11.3 Won't Start

Aug 20, 2010

I downloaded the iso from the webpage and used the live cd option. From there I chose install and proceeded to install the OS. Everything went fine and I got a message that the system would need to restart without the live cd. I saw the chameleon with the white growing line under (which seemed to run to it's completion) and then I came to a screen mostly white with three option buttons in the bottom right corner and my mouse with the waiting symbol spinning in the middle of the screen. Basicly the symbols stops spinning after a little while and the system hangs. I have tried starting in fail safe mode and run level 3 with the same result. My laptop is a MSI GX740

Edit: I have tried both ubuntu and mint earlier today and those Live CDs wouldn't even start. Also I am using the CD size Gnome ISO. Maybe some of the content on the dvd iso would provide support for my HW?

View 9 Replies


ADVERTISEMENT

OpenSUSE Install :: Fresh Install + Update & Reboot = Unable To Open Session?

Sep 14, 2010

I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again

View 1 Replies View Related

OpenSUSE Install :: Fresh Install 11.4 Blocks At Splash Screen On Reboot

Jun 30, 2011

I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.

Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.

Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.

I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.

Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.

So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.

View 4 Replies View Related

Fedora Installation :: X Doesn't Start On Fresh Install (x64)

Jul 31, 2009

I just downloaded the F11 x64 DVD iso, and I when I try to install it, after the media check screen, Anaconda starts it load, but it says "X failed to start, falling back to text mode" (or something like that).
The install goes through (in text mode), and all that gets installed is the basic environment.

My specs:
- AMD X2 Phenom II 550 Callisto
- 4gb DDR2 800 memory
- 1tb Samsung SATA / 100gb Western Digital SATA
- 2x XFX Geforce 9600gt 1gb
- ASRock K10N780SLIX3-WIFI motherboard

I've tried Ubuntu x86 on the same system, but I was having issues with it, so I decided to try FC11 instead.

View 7 Replies View Related

OpenSUSE Install :: Better To Update Current Setup Or Do A Fresh Install Of 11.3?

Jul 31, 2010

I am looking to update from 11.1 to 11.3. My question is would it be better to update my current setup, or do a fresh install of 11.3? I was never able to get 11.2 to install no matter what I tried so I gave up on it and went back to my tried and true 11.1. What is the best way for me to get 11.3 on my computer?

View 4 Replies View Related

OpenSUSE Install :: After A Fresh Install Of 11.4 X-system Comes Up With The Wrong Screensize

Mar 15, 2011

After a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?

View 8 Replies View Related

OpenSUSE Install :: Disable Win 7 Dual Boot And Do A Fresh Install?

Apr 16, 2011

I have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!

I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.

For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?

Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?

How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.

By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.

View 4 Replies View Related

Debian Installation :: Fresh Jessie Install - Cinnamon Can't Start

Sep 17, 2014

I recently have started playing with various distros (Mostly just Zorin and Debian) and have been trying to find a GUI I can actually comfortably use without wanting to punch my screen. This lead me to cinnamon which looks like something I could actually use.

I performed a fresh installation of Debian Jessie without the desktop environment and print server (System Utilities or whatever that option is called was left checked) and after the system installed and booted I proceeded to login as the root and install cinnamon. Unfortunately afterwards my system would be nothing but a black screen with a box saying that cinnamon had crashed and was running in fallback mode.

However if I let a fresh installation install the default GUI of xfce and then perform the cinnamon installation, cinnamon will install and run. My question is why doesn't a clean install with cinnamon work but installing cinnamon after another gui does? I don't get any apparent error messages beyond cinnamon crashing and I'm still fairly new to Linux.

View 11 Replies View Related

Ubuntu :: Xorg Fails To Start On Fresh Install With 2x GTX285?

Sep 1, 2010

Xorg fails to start on fresh install with 2x GTX285

View 3 Replies View Related

Ubuntu :: Mono Fails To Install / Uninstall - Start Fresh?

Jan 13, 2011

Specifically, libgtk2.0-cil, seems to be giving me a world of trouble.
I tried to install mono so that I could use an application. When it went to install libgtk2.0-cil, everything broke. I've tried to reinstall, purge, remove, and each time it fails. I've gone through a few iterations of trying to get things to remove cleanly to start fresh, so there are a few packages that are dependent on libgtk2.0-cil causing issues as well.. but thats to be expected. code...

I tried, and cannot locate the files it notes; `/usr/share/cli-common/packages.d/policy.2.6.gtk-dotnet.installcligac. I tried to create them real quick with touch, it removes what I make but still does not uninstall and still gives the err.

Can anyone offer assistance on removing this so that I can start fresh?

View 2 Replies View Related

Ubuntu :: Cups Does Not Start On A Fresh Natty Install On A Samsung N150?

May 14, 2011

Code:
sudo /etc/init.d/cups restart
results in

[code]....

View 1 Replies View Related

OpenSUSE Install :: Overlapping Partitions With Fresh Opensuse 11.3 Install

Aug 4, 2010

After a fresh install of opensuse 11.3 x86_64, using a NET install CD, I noticed that the boot disk layout has overlapping partitions. I've noticed one other post that mentioned this at the very end. Is this a known problem already? Or is there something I'm missing that makes this okay?

View 9 Replies View Related

OpenSUSE Install :: No XServer After Fresh 11.2 Install

Apr 18, 2010

after the install with kde selected i get a command line however typing startx tells me no startx installed, startkde says "$DISPLAY is not set or cannot connect to the X server."

hwinfo --gfxcard says
Hardware Class: graphics card
Model: "Trident Microsystems 9910"
Vendor: pci 0x1023 "Trident Microsystems Inc."
Device: pci 0x9910 "9910"
SubVendor: pci 0x1179 "Toshiba America Info Systems"
SubDevice: pci 0x0001
Revision: 0x63

laptop is a tecra 8200 and the graphics card is actually "Trident Microsystems CyberBlade XP" not sure of that is the problem or what to do about the whole thing

View 9 Replies View Related

OpenSUSE Install :: Update After Fresh Re-Install

Jul 15, 2011

I had to reinstall OpenSUSE after I reorganized my hard Drive partitions... I was trying to update the system when I encountered an ERROR: Problem connecting to a software origin There was a (possibly temporary) problem connecting to a software origins. DETAILS File"/repodata/repomd xml' not found on medium [URL] My repositories too seem all right.

View 8 Replies View Related

OpenSUSE Install :: Fresh Install Of KDE

Jul 10, 2010

My Thinkpad is set up with ext4 for / and, as an unformatted leftover from the last update, /home is setup with ext 3. I intended, as always to leave /home alone, reformat / and do a fresh install. One this occasion though I am wondering whether to bite the bullet and reformat /home as well and do a complete fresh install all around. Other than the advantages of ext 4 over 3, is there any advantage to occasionally cleaning out KDE and doing it fresh?

View 1 Replies View Related

OpenSUSE Hardware :: SMTP 1 CPU Instead Of 4/8 (fresh Install)

May 19, 2011

Just moved from 11.3 to 11.4. I have an Intel DX58SO MB with an I7 cpu. Upgrade failed, so did a fresh install from the dvd media. For what ever reason, it did not detect multiple cpu's and I am running on 1! ??? What is going on, and how do I fix this? I'm suspecting a bug at this point, but will hold off until I can get some validation, or input.

cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6

[code]....

View 9 Replies View Related

OpenSUSE Install :: Does A Fresh MBR Contain Generic Code

Jan 13, 2010

If I low level formatted a drive, then created a partition table, and installed Linuxes with their bootloaders *only* on their root partitions, would the one with the bootable flag set boot?

To put it another way; does the process of creating a partition table using Linux tools put generic code in the MBR?

View 9 Replies View Related

OpenSUSE Install :: Almost No Sound After Fresh Installation / What Is Going On?

Sep 11, 2010

Following some problems of kernel upgrade, I have resinstalled my system. I now have some issues with sound. CD are recognized and played but no sound is coming out of my speakers (tested with amarok and caffeine). Same thing on .....: I see the video and get no sound.

However, I can hear the test sound form Configure Desktop / Multimedia

Any clue about what is going on?

View 8 Replies View Related

OpenSUSE Multimedia :: No Sound After 11.3 Fresh Install

Aug 12, 2010

I have a fresh install of openSUSE 11.3 (gnome) on my Dell Opxiplex380--but no sound... The hardware works because I can swap a Windows SATA HD into the CPU and test it. My alsa-info file is here: [URL]...

[code]....

View 9 Replies View Related

OpenSUSE Multimedia :: No Sound In Fresh 11.4 Install

Mar 10, 2011

Just installed OpenSUSE 11.4, and so far I love everything about it, the only thing that's not working is the sound. I have my sound card setup in YaST -> Sound like I always have, and it recognizes it as M-Audio Delta Audiophile 24/96. I also installed alsa-tools-gui to get Envy24Control for ICE1712 chipsets, and I unmuted all the outputs, and raised the DAC volume. My speakers are on, and all the cables check out. Here is all my multimedia information:

[Code]....

View 9 Replies View Related

OpenSUSE Install :: Boot 11.4 On Dualboot Nvdia G7600 Based System - Fresh Install "system Console Stolen At Line"

Apr 22, 2011

I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).

I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.

Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1

View 9 Replies View Related

OpenSUSE :: Update Error On Suse 11.3 (fresh Install)?

Jan 6, 2011

I have installed Suse 11.3 on my computer yesterday but since then I have been trying to update it but unable to do so. Everytime I try I get this error message: "system management is locked by the application with pid 6953 (usr/sbin/packagekitd). close this appliaction before trying again."

View 8 Replies View Related

OpenSUSE :: Plasma Hangs After Login On A Fresh Install?

Apr 19, 2011

I installed openSUSE 11.4 today and I have a problem. After login, KDE Plasma hangs for about 30sec and I can't do anything. The keyboard and the mouse are working, but if I click, I don't get any response only after about 30sec.

This is a fresh install, 32bit, I'm using only the Oss, Non-Oss and update repositories and the system is up to date.

I have an nvidia 9500M GS graphics card, first I thought it is a driver bug, but I tried both the stable 260.19.44 and the latest 270.41.03 drivers, and was no difference.

I made an another user to try with a clean kde, but the same happened.

I have nothing in my Autostart directory, and I cleaned also the /etc/xdg/autostart dir, leaving there only the pulseaudio related files.

View 5 Replies View Related

OpenSUSE Install :: Login Failed After Fresh Installation?

Jun 2, 2010

I have tried to install openSuse several times and the same problem would persistRight after installation, when the prompt to log in shows up, I enter a username and a password, but it says that login failed. I am sure I type in the correct data as I have written down the username and the password I register during the installation.Also, after the installation finishes, the computer restarts automatically, though instead of restarting it goes into a mode similar to stand by. The screen is blank and the media buttons of the keyboard are lit, but nothing happens, so I just restart manually. Could this have something to do with it

View 2 Replies View Related

OpenSUSE Network :: Fresh Install Hostname Wrong

Nov 17, 2010

Just completed a fresh netinstall of OpenSUSE. This machine previously had a Ubuntu install on it, but I was having all sorts of issues and decided I required a fresh start. The install itself went acceptably, although I ended up manually fixing GRUB.Now the system is running, I've got a ridiculous problem, in that I'm still seeing the old hostname- It used to be ubuntu-server, but should now be unimatrix-001.Checked both the obvious places (/etc/HOSTNAME & YaST), but the correct hostname is in both of them.

View 5 Replies View Related

OpenSUSE Wireless :: BCM 4322 On Fresh 11.2 Install, Not Working?

Nov 13, 2009

Newbie here, but I'll attempt to display all the information requested in lwfinger's sticky:

/sbin/lspci yields:
Code:
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN

[code]...

View 9 Replies View Related

OpenSUSE Wireless :: Fresh 11.2 Install - Wifi And Dhcp?

Dec 23, 2009

I just did a fresh install of 11.2 on my Thinkpad (previously running 11.1) and am having trouble with getting wifi to work properly. My wireless will not connect reliably. Sometimes it connects after reboot but then drops and will not reconnect. Below in line 4 of the status query you can see that it says DHCP4 client NOT running.

ifstatus wlan0 wlan0 device: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) DHCP4 client NOT running wlan0 is up 5: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:13:02:4e:66:38 brd ff:ff:ff:ff:ff:ff
Configured IPv4 routes for interface wlan0:
default 192.168.1.1 - -

[Code]...

View 9 Replies View Related

OpenSUSE Install :: Update Start But Would Stop Right In The Middle And Refuse To Install Pulseaudio(...) Package

Jun 18, 2010

I have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.

I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.

I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.

View 9 Replies View Related

OpenSUSE Hardware :: 11.3 Fresh Install From DVD Did Not Recognize Internal Bluetooth

Jul 28, 2010

When I tried to upgrade via DVD I had numerous problems and most of them were fixed by installing with automatic configuration. My laptop is a Pavilion dv2000. I added on the bluetooth 2.1 Internal module and it worked perfect in 11.2.

Anyway, bluez won't start and the bluetooth hardware is not recognized by USB.

View 1 Replies View Related

OpenSUSE Install :: Installing Fresh Or Upgrading Open Suse 11.1 To 11.2?

Feb 24, 2010

My question to the community is should I preform a fresh install of OpenSuSe 11.2 or upgrade my current version of OpenSuSe 11.1? As of current I just use my system to surf the web check, email and Basic Business needs. The specs of my Laptop are:

OS Information
OS: Linux 2.6.25.20-0.4-default i686
Current user: jraglin@Jada
System: openSUSE 11.1 (i586)
KDE: 3.5.9 "release 49.1"

[Code]...

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved