Ubuntu :: No GUI On Fresh 10.04 Install
Nov 6, 2010
I just performed my first (successful?) Ubuntu installation. The installation process seemed to go fine, and I selected "Ubuntu Desktop" when asked which set of packages I wanted to install. I assumed this was a standard choice.
After the installation finished, the system rebooted and brought me to a login prompt.I'll mention at this point that I have SOME prior experience with Linux systems, but I'm by no means an expert, and I'm new to Ubuntu. I logged in and tried startx, only to be informed that it was not installed. Having performed a network install, I have internet access on the machine, so I tried "sudo apt-get install xinit" which seemed to work, but now when I run startx, my window shrinks to a portion of my monitor size, the colours invert (black prompt on a white background) and the system locks up. I'm assuming this is some sort of video driver issue, and could probably explore further, but I figured I'd ask some experts first.
View 2 Replies
ADVERTISEMENT
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Jun 30, 2011
I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
View 4 Replies
View Related
Jul 31, 2010
I am looking to update from 11.1 to 11.3. My question is would it be better to update my current setup, or do a fresh install of 11.3? I was never able to get 11.2 to install no matter what I tried so I gave up on it and went back to my tried and true 11.1. What is the best way for me to get 11.3 on my computer?
View 4 Replies
View Related
Mar 15, 2011
After a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?
View 8 Replies
View Related
Apr 16, 2011
I have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!
I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.
For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?
Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?
How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.
By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.
View 4 Replies
View Related
May 3, 2010
I'm running Win XP 64 bit and ubuntu 9.10 as a dual boot. I also have the CD for Ubuntu 10.04. My question is, I want to do a fresh install and would prefer it to install over 9.10. Is this what will happen or will it want to install as a 3 way boot??
View 2 Replies
View Related
Jul 26, 2010
I installed ubuntu some weeks ago, then had to install compiz and other stuff like nvidia-current myself...now when i do a fresh install, it's there which means some files are saved.. how do i stop that, and make a 100% fresh install?
View 3 Replies
View Related
Feb 11, 2010
Every times, after a fresh install of ubuntu karmic, i use update manager for to get all possible updates and regularly on reboot i have a filesystem check with immediate reboot.P.s. I tried also to divide the updates, but in this way happens even twice.
View 4 Replies
View Related
Mar 20, 2010
I just installed ubuntu 9.10 on my computer and it just freezes without me doing anything.If i open my computer and leave it like that it will freeze after 5 mins or so.
View 8 Replies
View Related
May 29, 2010
I upgraded to 10.04, upgrade went fine but now I have lots of problems.My wireless internet is extremely slow, its as if I am on dail up.My Rogers Rocket stick that used to work perfectly is now not connecting to the internet wich is a huge problem for me.Flash player now dont work either and Mozilla thinks its not even installed.I cant change the time and date, it tells me I have to unlock to change the Time but when I click on unlock nothing happens.Who knows what else is not working either.
I am not impressed at all with 10.04, my laptop and Netbook used to work perfectly before the upgrade and now I have tons of problems.What can I do to fix my problems or will a fresh install work better
View 7 Replies
View Related
Jun 24, 2010
I messed up an install of Ubuntu (tis all part of the learning process) and I was wondering if I could install a fresh copy over the top of the old one?Would it remove everything like themes, programs and drivers and stuff?
View 9 Replies
View Related
Jun 30, 2010
I have just installed Kubuntu 10.04, but can't login into it. I enter correct user/pass, then it tries to go into KDE, but suddenly drop back to login window.The same situation with failsafeX.A olso tried different users and several times reinstalled Kubuntu.
Here is my "~/.xsession-errors"
Xsession: X session started for metrofun at Wed Jun 30 20:04:22 EEST 2010
konsole(1091)/kdeui (kdelibs): Attempt to use QAction "change-profile" with KXMLGUIFactory!
x-terminal-emulator: ../../src/xcb_io.c:385: _XAllocID: Assertion `ret !=
[Code]....
View 3 Replies
View Related
Sep 15, 2010
I just installed Ubuntu 10.04.1 LTS i386 on my desktop after not having it on there for while then decided to do a clean install on my laptop, which had 10.04, but I had screwed a few things up on it... (and a fresh install is always nice
Anyway, no big deal, just kinda weird: Whenever I google something that I had just googled before on my desktop (ie, a program or something that I had installed, and wanted to install on my laptop also), the link for the result is purple, as if I had already visited that link. But I know I haven't because this is a completely fresh install, I reformatted and everything. The only thing I can think of is that somehow the history/clicked links got transferred to the live CD from my desktop, as I used the same disc for both installs, but this seems a bit improbable imo.
EDIT: I just realized that I did NOT use the same disc for both installs, I couldn't find the original so I burned the .iso onto another one for my laptop install....
View 4 Replies
View Related
Oct 5, 2010
I have a >5 year old laptop, running Maverick (Ubuntu 10.10) but I need to do a clean install since the video driver is all screwed. The laptop is without USB boot option in BIOS. The CD drive is physically removed.
The HD partitions are
/dev/sda1 (ext4) 15gb mounted as /
/dev/sda2 (extended)
/dev/sda5 (linux-swap) 2gb
/deb/sda6 (ext4) 20gb mounted as /home
How can I do a fresh install??
View 1 Replies
View Related
Apr 18, 2010
after the install with kde selected i get a command line however typing startx tells me no startx installed, startkde says "$DISPLAY is not set or cannot connect to the X server."
hwinfo --gfxcard says
Hardware Class: graphics card
Model: "Trident Microsystems 9910"
Vendor: pci 0x1023 "Trident Microsystems Inc."
Device: pci 0x9910 "9910"
SubVendor: pci 0x1179 "Toshiba America Info Systems"
SubDevice: pci 0x0001
Revision: 0x63
laptop is a tecra 8200 and the graphics card is actually "Trident Microsystems CyberBlade XP" not sure of that is the problem or what to do about the whole thing
View 9 Replies
View Related
Aug 20, 2010
I downloaded the iso from the webpage and used the live cd option. From there I chose install and proceeded to install the OS. Everything went fine and I got a message that the system would need to restart without the live cd. I saw the chameleon with the white growing line under (which seemed to run to it's completion) and then I came to a screen mostly white with three option buttons in the bottom right corner and my mouse with the waiting symbol spinning in the middle of the screen. Basicly the symbols stops spinning after a little while and the system hangs. I have tried starting in fail safe mode and run level 3 with the same result. My laptop is a MSI GX740
Edit: I have tried both ubuntu and mint earlier today and those Live CDs wouldn't even start. Also I am using the CD size Gnome ISO. Maybe some of the content on the dvd iso would provide support for my HW?
View 9 Replies
View Related
Jul 15, 2011
I had to reinstall OpenSUSE after I reorganized my hard Drive partitions... I was trying to update the system when I encountered an ERROR: Problem connecting to a software origin There was a (possibly temporary) problem connecting to a software origins. DETAILS File"/repodata/repomd xml' not found on medium [URL] My repositories too seem all right.
View 8 Replies
View Related
Jun 2, 2011
Just tried to install gnucash on a fresh install of 13.37. ALL dependencies are installed, with no errors from any. The gnucash slackbuild dies with a message that says "gnome.h, no such file or directory". All I can find is that it is and very old dependency of gnome.
View 9 Replies
View Related
Mar 19, 2010
I just built my PC and loaded ubuntu on it. When the ubuntu desktop comes up everything looks ok. but when I click on any of the drop down menus, or anything else for that matter, the computer freezes immediately. I,ve tried copying the iso boot file to a new cd and reloading ubuntu but the problem remains. I've also tried removing one of the two ram sticks but again, the problem remains.
PC specs:
Intel dh55hc board
Intel i3 cpu 3ghz
2 Corsair 2gb RAM sticks
750 western digital HD
Sony lightscribe DVD drive
View 9 Replies
View Related
Mar 20, 2010
I have an old Dell desktop that normally runs XP. It has 512mb of ram and I think its a Pentium processor. From what I understood Linux is a simpler, and more stable and efficient OS so I figured I'd give it a shot. First I tried the Wubi installer and got nothing but error messages after the install and it kept freezing and eventually just wouldn't boot at all. So then I tried the full install from disc. Better at first. I soon discovered all the customizable themes and went a little nuts trying to make one user exactly like W7 and the other exactly like OSX leapord just for fun.
I noticed significant slow downs and after some research I came to find that it was taxing my old graphics card. So I setup a user with no changes, still really slow. Then I deleted and reinstalled and I'm now using the bare bones UI. Its still really, really slow. I get lots of mouse drag and just now it took about 7 seconds for the applications window to drop down and 35 seconds to open the home folder. Also about 10 seconds for right click window to drop down.
I'm trying and I really want to like Ubuntu but as of now I'm finding it unusable for even the most basic of computing. I realize my computer is old but xp still runs like gangbusters. So maybe Ubuntu is designed for more modern hardware and more ram, am I screwed? I was looking forward to playing around really customizing my GUI but more importantly I was planning on putting on my girlfriends laptop with similar specs. Her computer needs a reformat but she doesn't have the XP disc. As it stands her XP is still much more usable even with all the viruses then Linux is as a fresh install on my desktop. I don't want to delete xp and end up with a slower linux.
View 9 Replies
View Related
Mar 24, 2010
After a fresh install of Karmic, I am trying to restore thunderbird's emails. I tried to just replace the whole folder but this did not work.
View 9 Replies
View Related
May 6, 2010
I'm hoping someone can point me in the right direction. I've tried Google searching and searching this forum, but haven't found something similar to my issue. Yesterday, I installed 10.04 off of the live CD onto my Toshiba Satellite A45-S250 laptop (P4 2.8, 1GB RAM).
The main problem is: -if the computer sits idle for more than about 5 minutes, the display will freeze. Image stays on screen, but the computer appears to be non responsive to all input.
-I thought it was a screen saver at first, but it happens even with the screen saver disabled. -I can still SSH into the machine from my desktop computer. I get a normal prompt, and it seems to be working fine from the shell. This is how I have been restarting or shutting down the machine after a freeze.
Secondary issues (that may help diagnose the problem):Even when this laptop appears to be functioning normally (pre-freeze), I cannot switch to any virtual terminals. Well, I can, but when I get there, something is not right. The text does not display properly. It sort of strobes on and off near the top right hand of the screen. -On shutdown, I get a weird colorful displays of what I can best describe as "static". The closing splash screen may just blink on for a second. Other than that the screen stays black until the machine shuts down.
-I've run versions of Ubuntu going back to Breezy on this machine, mostly without issue, and it has been a full time Ubuntu machine since the release of 8.04. These symptoms all appear to be related to video / display.
View 9 Replies
View Related
May 8, 2010
I just installed the latest version, updated it and everything, but I can't get my sound to work. I have an onboard sound card, and a Soundblaster too.
Here are the lspci results:
Quote:
And the aplay -l results:
Quote:
I'd like to be able to get my Soundblaster to work, cause I plan on dual booting with WinXp, but if the only way is the onboard way, I'm cool with it.
View 5 Replies
View Related
May 26, 2010
I have just made a fresh install of Ubuntu 10.04 on my laptop which was already running on windows 7. The installation itself was ok, however, after the restart in the end it did not want to load anything. I get just a blank screen. I am not much of a linux expert, so all I could do is start thee computer via a live cd and see what is there. And it looks normal - windows is intact, new linux partitions are there, GRUB is also there. What should I do? Reinstalling everything is not a proper solution...
View 9 Replies
View Related
Jun 8, 2010
I have a new 500GB disk, with a partition with Windows XP, one with Windows 7, one for Ubuntu 10.04, one for /Home and one for swap. The systems were installed in that order. But after finishing with the Ubuntu installation, removing the CD from the drive and restarting, GRUB never showed up, and the system went straight to the Windows OS selector; the one prompting to start Windows 7 or an "Earlier version of Windows". So I can't get to Ubuntu, even though it seems it installed just fine.
As a note: just after the installation process ends and it shows the "remove CD" message, it spilled out a list of I/O errors in some sr0 device or something. But I just installed the same Ubuntu on a friend's computer and it showed a similar error list, yet his system works just fine... However, he doesn't have Windows 7, thus no OS selection screen other than GRUB. I didn't want to rush into editing the MBR or re-installing GRUB before I knew I had to do that.
View 9 Replies
View Related
Jun 23, 2010
I tried Intrepid on this computer a few years back, and remember sweating over my computer for days trying to get the sound to work, before eventually giving up and going back to Windows. Now I figured I'd give it a second go. 100% fresh install, Lucid Lynx. I was hoping maybe the new version would have fixed whatever I was having trouble with before. No such luck. Have checked that nothing is muted, in the tray icon and in alsamixer and in a bunch of others. Have made sure that I'm in all the proper groups.
"aplay -l" gives me:
**** List of PLAYBACK Hardware Devices ****
card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4]
Subdevices: 1/1
[code]....
View 5 Replies
View Related
Aug 16, 2010
So apparently RAID configurations on desktops are pretty much worthless using the motherboard�s internal hardware and BIOS settings. How reliable is the Ubuntu SoftwareRAID? I have 3 HDD�s one that I install Ubuntu on and the other two are in a RAID 1 setup strictly for data backup. Will SoftwareRAID be able to pick up where it left off if for some reason I need to do a fresh install of Ubuntu or will I risk losing the data on the RAID 1 drives? I wasn�t sure about this since SoftwareRAID is obviously software driven and not hardware driven.
View 9 Replies
View Related
Sep 4, 2010
After a fresh Ubuntu 10.04 install, no internet for some reasons.
Here is what I have in ECT/network/interfaces
Here is the results of sudo dhclient:
No working leases in persistent database sleeping.
View 9 Replies
View Related
Sep 16, 2010
I just installed Ubuntu 10.04 on an older machine for the sole purpose of using it to run XBMC. Everything was fine until I plugged in some speakers and began having issues. The sound, system wide, is not working. It is onboard sound AC97 (rev 60). I have done some reading on the Internet but have yet to have any success fixing this issue. Not that it should matter, but the speakers are Logitech G51. Below is the output that, if I understand correct, shows the audio device is recognized.
desktop:~/Desktop$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: V8237 [VIA 8237], device 0: VIA 8237 [VIA 8237]
Subdevices: 3/4
Subdevice #0: subdevice #0
[Code]...
edit: I also checked the BIOS settings to ensure the device isn't disabled. However, the only two options are "auto" and "disabled" has anyone had this issue?
View 1 Replies
View Related
