Ok downloaded the SlackBuild script to install flash. I download the the files to go with it and ran the script. The script creates a .tgz in my tmp folder and I install it. After I install it I close out of my browser and re-open to check flash and every website I goto tells me flash is not installed I am a little confoobared with this?
View 6 RepliesYou may know that there was a security release for Adobe Flash Plugin for Linux x86 but not for x86_64. There has been a development:
See : http://labs.adobe.com/downloads/flashplayer10.html
It works fine here. I have a Multilib Slack 13.1 stable.
How do I get Adobe Flash Player installed in Debian 6.0.0 (Squeeze?) I went to a couple of sites and tried typing into terminal what they suggested but to no avail. One of the commands had the sideways wavy line in it, but I do not have that key on my Toshiba L-455 Satellite laptop. Could anyone please asist me in getting Adobe Flash Player or the plug in installed.
View 3 Replies View RelatedJust been trying to install flash player for playing vids etc via facebook and getting the msg of "Flash Player needs to be installed".
However when trying to install it via
sudo apt-get install adobe-flashplugin
I get the msg of "package not available, but is referred to by another package". Tried to get it through APT and get "adobe-flashplugin" is virtual. Also tried deb and get this error msg "Error: Wrong architecture 'i386'.
Running Lucid Server with desktop installed as well on BenQ Joybook S42 Laptop.
I am having trouble with adobe flash player 10 in ubuntu 8.10 using firefox 3, I installed it from packages but every time I go to look at a video or what ever I get flash player not installed
I installed it again and read the details when it was completed and although it said the install was succesfull this was at the end (Sha256sum mismatch install_flash player_10_linux.tar.gz plugins not installed
/install_flash_player_10_linux.tar.gz
Is it possible to play flash without flash-player installed? I heard that SWF file and flash player itself may be included into one EXE file.
View 3 Replies View Relatedi'vejust installed flash player 10 using adobe-release-i386-1.0-1.noarch.rpm of the net
now where does yum install this to? how can i link Opera 9 to the plugin?
I have installed flashplayer to my fedora and tried to watch videos which need flashplayer but it wont start. Its seems like my system have installed flashplayer but can't find plugin from mozilla. Tried to check if plugin exists but no. Tried to install it again but no.. same problem again.
View 3 Replies View RelatedI installed Flash Player, But when I go to play a video or something it says I still have to install it so go back to adobe to install but says it is already installed. Ubuntu v.9
View 4 Replies View RelatedI installed flash player for my daughter and lost all my icons. I did " sudo gnome - panel restart and got them back , All but the wireless icon and I do not have a clue how to get it back. I also need to know how to get my pc to see the ubuntu os on the same network and how to view its traffic as part to police what my daughter is doing.
View 1 Replies View RelatedI can see that it installed correctly but it doesn't work.how to get flash to work right on Firefox in CentOS?
View 2 Replies View RelatedCode:
checking for a BSD-compatible install... /bin/ginstall -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
[Code]....
while trying to install mpd via SBo this error keeps occurring . I am still new to linux and do not know where the 'config.log' would be.
I have installed the latest version of flash player and watching videos on ..... and other live streaming pages should work, but when i select a video it keeps loading with out playing the video or showing any progress in the loading bar. and i dont have any problems with my internet connection
View 1 Replies View RelatedI am absolute beginner with ubuntu. I have been trying to download and install flash player with little success. I have downloaded it and according to system it is installed. However when I am on the internet and want to listen to the radio I get a message saying I need to install flash player.
View 9 Replies View Relatedhave fedora12 use to be able to view videos on all sites, no espn no you tube have adobe flash player installed seem to happen acouple of months ago
View 1 Replies View Relatedtrying to compile heartbeat on slack64, anybody has checked this? and/or solved?
View 8 Replies View RelatedIt's not that i use it for fun or entertainment... so, I had never noticed this...
yesterday I wanted to watch a ..... video, and no sound...
Sound ctrl works alright in my Kde 4.3.x, lspci is fine... i guess i may be missing a driver or something. code...
Try any quicktime site... apple trailers etc. I've tried:
mplayerplugin that comes with Slack 13
mplayerplugin svn compiled from source, with Seamonkey
vlc plugin for firefox
One of two things always happens: it "loads" forever, or it crashes the browser. I don't understand. The kicker is that LOCALLY played mov files do seem to work (download some here [URL])! Which makes no sense.
I went to watch a short little clip on ..... and it said I needed flash 10 so I downloaded that and the problem is, is that when I tar the file there was only one other file in the tarball which was libflashplayer.so. Would I need to download the source for that and the slackbuild if its got one. I am having difficulty trying to download anything it says to select a mirror and go from there but how do you uncomment a mirror? I cant even update my computer. I am using slackware 13.1 64 bit.
View 14 Replies View RelatedI have a fairly fresh install of Slackware and I just installed the flash plugin for Firefox. After installing the flash plugin, I'm able to view videos, but I'm unable to hear any sound.
- Pidgin also does not play sound
- Amarok plays sound fine
- Other KDE system event sounds play fine (i.e. starting and leaving X)
- I used alsaconf to configure my sound as it wasn't working right after the Slackware install
Adobe Flash Player remains the security problems black hole. Are there open source alternatives, which are good in replacement for it?
View 13 Replies View RelatedUsing Pentium4, snd_hda_intel, Codec Realtek ALC880, slackware64 13.1, No Gnome, firefox3.6.8 with flashplayer. Is is possible to replace Flashplayer with mplayerplug-in? Followed this a ubuntu tutorial:[URL]..community/SoundTroubleshooting to identify Sound Device using:
Code:
$wget -O alsa-info.sh http://alsa-project.org/alsa-info.sh && bash ./alsa-info.sh Tested sound by running gxine wizard which set it up as a plugin. Also ran mplayer but there was no wizard for firefox plugin both play sound. Used slackpkg to download mplayerplugin and pkgtool to install it. Where is mplayerplugin suposed to be installed? ***Found Mplayerplug-in... Pkgtool installed it right into Tools -> Addons-> Plugins intoo firefox... So i am going to disable Flashplayer and see what happens Thought I had to mannually configure it?
[Code]...
I just installed Adobe Flash Player 10 and it says it's installed, when I go to firefox and Epiphany it still has flash player 9, Ive quited the browsers and everything Ive uninstalled/reinstalled still no luck.
View 9 Replies View RelatedI have an odd problem with a computer I just set up. It is slack64 with Alien Bob's multilib packages. When I have the gtk+2-compat package installed I can no longer see any printers in firefox. I get error messages showing that it is trying to use the 32bit gtk+2 stuff. If I uninstall the gtk+2-compat package the printers show up as they should in firefox. I do not have this problem on my own slackware64/multilib system.
View 3 Replies View RelatedHow to install flash player and eclipse on Slackware 13.1 ?
View 2 Replies View RelatedMy flash player has stopped playing back audio on a particular TV show recording. Movie is fine but no audio. It's fine with every other movie. However, I notice I can play that same tv show in windows, which has to discount a problem with the station or their movie files. The slack package used to play this tv TV program until recently.
Code:
[URL]
Do you think reinstalling the package would fix it?
i.e.
Code:
slackpkg remove flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz
then
Code:
slackpkg install flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz
i was having severe problems under slackware64-current with the adobe flash player plugin for firefox. browsing and watching videos on videos was a pain in the neck with the player crashing when opening a couple of tabs, and constant lockups for several seconds while the plugin wrapper that was running it was taking one cpu core for itself.
it seems the problem stems from a recent change in glibc that modified the memcpy implementation and caused a bit of havok in some packages. i'm guessing it's the same change (or a similar one) that caused problems with sysklogd and iptraf, among others, with strcpy and overlapping strings. remember the patches:
[url]
[url]
strictly speaking, those are problems in the program source code, but most people seem to think it's a bad idea to provide a memcpy that doesn't work for overlapping strings. a bit of discussion can be found here, with a few priceless comments by torvalds:
[url]
it seems the source code for the flash player plugin probably contains this bug, as manually modifying the libflashplayer.so binary to replace memcpy calls with memmove calls fixes the problems. at least it clearly did for me.
a quick recipe can be extracted from that bugzilla entry and one of its attachments.
for example:
code:
that should modify the binary in place provided it's located at ~/.mozilla/plugins. the resulting binary is not distributable but the recipe is.
Can anybody tell me how to compile Kid3 without the TunePimp, Musicbrainz, and MP4 cruft? I don't feel like descending into dependency hell for the sake of stuff I'll never use. In KDE3 I could just execute ./configure with a bunch of --without statements. With KDE4 it just says to run cmake . and then make. For the life of me I can't figure out the way to handle this.
View 4 Replies View RelatedI just finished an install of Slack64 current and it's crashing when I try to start up KDE. I tried setting the VESA framebuffer to 'normal' in /etc/lilo.conf, but no dice.
Here's the log file: [URL]
GFX Card: Radeon HD 6850 (yeah I know.. this is probably the source of the conflict)
I'm using Slackware64 with multilib (AlienBob) and i can't compile 32bit programs; 64bit programs do compile (tried helloworld). I read the tutorial and folowed it step by step setting my paths right (32dev.sh) and changing libsuffix="64" to libsufix="" from the slackbuild script.
In the attached config.log in the core test section there is this line that i find interesting
Code...
Why is it reading specs from lib64? code...