Ubuntu :: Change From 24 Hour Clock?
Apr 2, 2010No clue how to change the 24 hour clock format in Lubuntu 10.04 Beta.
View 6 Replies
ADVERTISEMENT
Ubuntu :: Change The Digital Clock Panel Applet To 12 Hour Time?
May 17, 2011I want to know how to change the Digital Clock panel applet to 12 hour time because the default is 24 hour.
View 4 Replies View RelatedFedora :: KDE Panel Clock To Display In 12 Hour Not 24 Hour Format?
Mar 24, 2010I recently decided to try KDE4 and would like the change the clock on the panel to display 12 hour format and not the default 24hour format but i can not find where to change this option currently the clock looks like the attached picture. Gnome has this option and I would like to see it in KDE if it exists in the default clock. I am willing to replace the default KDE clock with a seperate widget if one exists for this.
View 1 Replies View RelatedUbuntu :: How Do I Change Time To 12-hour Instead Of 24-hour
Jun 17, 2011I just switched over to Lubuntu, and so far, it's been great.It's rendering quite well with my laptop, even though the fan is constantly running.I've had some small annoyances that I haven't been able to figure out. How do I get the power button and/or other related actions to the 'start' menu? Is there a way to drag and drop applets like in Ubuntu? How do I setup default brightness like in Ubuntu? How do I change the time to normal US time (12 hour instead of 24 hour)How do I change the time to a 12-hour instead of 24-hour?Is there a software center?
View 2 Replies View RelatedDebian :: Clock Always Set One Hour Behind?
Nov 20, 2010After daylight savings time, my squeeze installation's clock failed to adjust. I've tried to change this in the bios, but it always resets itself.
Is there a way to force-change the time?
General :: NTP Clock Jump One Hour At 12:00 AM?
May 20, 2011Yesterday I configured an NTP Server, and synched a sever with my NTP Server. Now some how my Client clock jumped one hour ahead at 12:00 AM, while HW Clock and NTP Server Clock remained.
Code:
cat /etc/sysconfig/clock
# The ZONE parameter is only evaluated by system-config-date.
# The timezone of the system is defined by the contents of /etc/localtime.
ZONE="Asia/Karachi"
[Code]....
Ubuntu :: System Clock Suddenly Losing 1min Per Hour?
Jun 1, 2010Today I updated a bunch of packages, rebooted. I run lucid 10.04 x86_64, originally Xubuntu but now gnome since I cannot make xfce4-panel tasklist behave with compiz. Anyway, by the end of the day my clock was 10min off. If I use ntpdate at about 10min intervals I see things like:
$ sudo ntpdate time.xxx.xxx.de 1 Jun 18:37:02 ntpdate[9734]: step time server xxx.xxx.xxx.xxx offset 10.043055 sec
I have deleted /etc/adjtime and touch'd a blank file to no avail.
Is this problem serious? Is it likely software or hardware? Is running an ntp daemon the right solution or would it be masking a new software or hardware problem that appeared today?
Fedora :: Get F13 To Show A 24 Hour Clock In The Upper Right Hand?
Sep 21, 2010How to I get F13 to show a 24 hour clock in the upper right hand where the time is displayed? I am using the default desktop so I guess that's gnome.
View 2 Replies View RelatedGeneral :: No 12 Hour Format Available In Gnome Clock (UK English)
Sep 2, 2010Very simple question but very frustrating as none of the other threads/bug reports/whatever have had quite the same problem. I want gnome clock to display the time in 12 hour format. The suggested solution is something like right-click the clock -> Preferences and somewhere there will be an option to choose 12/24 hour time. Problem is I don't have that option.
The help has a note that 12 hour time "is not shown if your session language does not use the 12 hour clock" but this really shouldn't be a problem? My language/locale/city, everything I can think of, it's all some variation of en_GB, UK English, Brisbane, Australia: all places which should allow the option of 12 hour clock! So why don't I have that option?
Software :: Cron Clock Is An Hour Off To System Time
Mar 31, 2010I have cron jobs running and the timing is critical, because I'm running Nessus scans on production servers. If I hit them at the wrong time, I'm toast. But when I check the cron log, I see that it is an hour off. Here is the output for the command "clock":
Wed 31 Mar 2010 03:01:26 PM CDT -0.257677 seconds
And this is the tail of the cron log:
Mar 31 16:00:01 nes-001 CROND[8790]: (root) CMD (/Nessus/Targets/NessusScriptDataCenterScan.test)
Mar 31 16:01:02 nes-001 CROND[8822]: (root) CMD (run-parts /etc/cron.hourly)
Mar 31 16:01:02 nes-001 run-parts(/etc/cron.hourly)[8822]: starting 0anacron
Mar 31 16:01:02 nes-001 anacron[8832]: Anacron started on 2010-03-31
Mar 31 16:01:02 nes-001 anacron[8832]: Normal exit (0 jobs run)
Mar 31 16:01:02 nes-001 run-parts(/etc/cron.hourly)[8834]: finished 0anacron
Cron thinks it is 4:00 p.m., but it's really 3:00 p.m. How do I tell Cron what time it is? (Stopping and restarting the crond service did not change it.)
Slackware :: 13.1 - NTP Daemon Don't Start Automatically And My Clock Is An Hour Late
Mar 29, 2011I use Slackware64 13.1 and this Sunday the hour change and ntp daemon don't start automatically and my clock is an hour late. It's normal or a bug?
View 20 Replies View RelatedSlackware :: Starting KTTSD Failed - How To Set Clock To 12 Hour Format
Aug 5, 2010If I set the clock to speak the time, I get this when it tries: starting kttsd failed. I've looked at the various posts, but haven't yet found an actual solution. I've tried to run kttsmgr, but for some reason the "run" dialog doesn't seem to do anything - no error, nothing. Type kttsmgr, press enter since there is not obvious other way to execute the command, and nothing happens.
Is this a module that does not come with KDE? And I give - I can't find time format anywhere. How do you change the clock that appears in the lower right corner to 12 hour instead of what appears to be default 24 hour? I don't see it in "Digital Clock Settings", and I don't see it in System Settings - Date & Time. This is a clean install of slackware 13.1, and whatever version of KDE comes with it.
OpenSUSE :: Switch Over From A 24 Hour To A 12 Hour Format?
Aug 5, 2010I need to change the time displayed in the task bar from a 24 hour clock to a 12 hour format. I could not find the relevant settings in OpenSuse 11.2 and same is the case for 11.3 as well.
how to make the change? I have tried System Settings ---> Computer Administration ---> Date & Time; but I was not able to make the desired change.
Similarly, I have a digital clock widget that shows GMT + 5.5 hours and I need to change that to 12 hour format as well.
General :: Ubuntu Clock Is Wrong / Can't Change It
Sep 20, 2011I have a strange problem with my Ubuntu Natty virtual machine running under VirtualBox on OSX.One day last week, my clock on the top bar in Gnome stopped displaying the correct time (I'm not running Unity). I'm on GMT, so right now it should be 9:31, but it's showing 3:31, so I think it's something to do with TimeZones. If I go into the date and time applet, the time is initially wrong but after a second sets itself to the correct GMT Time. The timezone is correclty set as London and it makes no difference if I unlock and set it again or select manual or automatic from internet time.
From a bash prompt, the "date" command shows: "Tue Sep 20 03:33:35 CDT 2011".If I run "sudo dpkg-reconfigure tzdata" I am correctly set as London. Upon exiting the commnand I'm shown the correct London time, but then typing "date" again shows the CDT time again.The clock is correct in OSX. This has been working fine for a month or two - I think it stopped working after an update last week. Any ideas?
Ubuntu :: 10.10 Clock Is In Military Time - How To Change The Setting
Nov 6, 2010In Kubuntu 10.10, the clock is set to military time. I shouldn't have to do the math just to look at the clock. There is no setting anywhere to change it to normal time.
View 8 Replies View RelatedDebian Multimedia :: Change Clock To A Digital One?
Nov 9, 2010how can i change my clock to a digital one? I'm running Debian Sid with E17.
View 14 Replies View RelatedUbuntu :: Change The System Clock So It Shows The Stardate Instead Of The Month, Day And Year?
May 21, 2010on the mac there is a piece of software to change the system clock so it shows the stardate instead of the month, day and year. Is there something like that for Ubuntu? I think it would be pretty cool to have a star trek themed desktop
View 9 Replies View RelatedUbuntu :: Unable To Change Natty Clock Settings In Unity Menu Bar?
Apr 27, 2011I recently upgraded my clean install Ubuntu Studio 10.10 64bit to Natty 11.04 and whilst everything is working well (except for having no plymouth boot splash - but I'm looking into this) I have noticed that when I log in to the "Ubuntu" desktop (with the Unity launcher and Menu bar in the top panel) I can't seem to change how the time and date is displayed. It seems to be stuck showing 24 hour time only with no date no matter which setting I select in the 'Clock' tab of 'Time & Date Settings' menu.
The clock applet works perfectly when I log into the 'Ubuntu Classic' desktop and I am able to display the date and weather ok.
I have a laptop which I upgraded from Ubuntu 10.10 64bit to 11.04 as well and it doesn't have the same issue.
I thought it might have been a rouge Gconf setting so I dumped my entire gconf using
Code:
gconftool-2 --dump / > ~/Desktop/allgconf.entries
then restarted into recovery and removed my ~/.gconf folder entirely, rebooted again and logged back on. Apart from losing some settings like Evolution and Networking, which I reloaded, and my theme going back to the default theme, the problem still exists.
General :: How To Change Default Position Of Cairo Clock
Feb 8, 2010I am using ubuntu. I have Cairo clock on my startup list, but after logging in cairo-clock appears on left top corner, but as it is the position reserved for computer, my home, mounted volumes etc. So I want to change default position of cairo-clock to left but there is no such option in the preferences of cairo-clock. My cairo-clock version is cairo-clock 0.3.4. Can I edit any config file of cairo-clock.
View 1 Replies View RelatedGeneral :: OpenSUSE 11.1: Change Digital Clock To 12hrs?
Feb 3, 2009openSUSE 11.1: change digital clock to 12hrs?
View 6 Replies View RelatedSlackware :: Change The Font For The Digital Clock, And KDE Was Frozen?
May 24, 2010Updated from KDE 4.3.5, saw memory consumption dropped a little bit, speed increased by a few percent. But when I added a widget to the panel, I could not see the widget. And when I double-clicked the same widget in the widget list (intending to remove it -- if it is a T' flip-flop), the widget was still on the panel, alive, and hidden.
Then I gave up, and wanted to change the font for the digital clock, and KDE was frozen. Ctrl-Alt-Backspace worked, fortunately. I think for my workshop presentation next week, I'd better use xfce.
Fedora :: 12 - Sudoers File - Change The Option In The Clock Options
Nov 20, 2009My clock needs to be set to usa time with am and pm But I don't see any option to select that? So I read online that I need to edit /etc/adjtime and change it from UTC to LOCAL
Problem is when I'm in the terminal it tells me I'm not in the sudoers file? So how do I fix my clock? its insane that I cant change the option in the clock options, and its also nuts that even though I created a root password I can't seem to just sudo and change it?
Debian :: Change Clock Type In Industrial Ximian Gnome Window
Sep 25, 2010I've Lenny with Gnome installed. Under System -> Administration -> Login Window -> Local, I have Industrial Ximian Gnome theme. How to change clock type from 12 to 24 in the Industrial Ximian Gnome window?
View 4 Replies View RelatedUbuntu :: Conky Clock And Top Panel Clock Not In Sync
May 27, 2011I'm using a very simple conky script to diplay the date and time on my desktop. I've noticed that he conky clock is a few seconds early compared to the time displayed in the right hand side of the top panel (Natty). I guess both displays are based on the same "internal" time, so I'm left wondering how this could happen, and how to sync back the clocks.
It seems that Conky is in sync with the system date, while the panel clock is 2 seconds late (on my system). Checked with while true; do date; sleep 0.1; done
Ubuntu :: Possible To Have Clock In Center Of Task Bar Centered Clock In U11.04?
Aug 2, 2011Just curious as to if it is possible to have the clock in the center of the task bar centered clock in Ubuntu 11.04?
View 1 Replies View RelatedHardware :: Interface To A Quartz Clock That Can Be Used For A TOD Clock?
May 2, 2011Does anyone know of an interface to a quartz clock that can be used for a TOD clock?? I want to interface it to an Arduino board. Can be GPIO or USB.
View 1 Replies View RelatedCentOS 5 :: Get Rid Of Virtual Clock And Use Physical Clock?
Sep 2, 2011I had cloned a centos 5.6 installation from virtualbox virtual machine to physical box. Everything work fine. However, the time showing in os using date command differs from bios time by roughly 4 hours. I am running ntp services which sync the time with another centos server on the network. It appears that some services are using virtual clock and some use physical clock. How do I get rid of virtual clock and only use physical clock?
View 1 Replies View RelatedUbuntu :: How To Get Python Script To Run Every Hour
Nov 23, 2010I have a python script that I would like to run every hour regardless of whether I am logged in. I have tried putting a link to the script in cron.hourly, however, it does not run.
View 9 Replies View RelatedUbuntu :: Black Screen After 1 Hour?
Jul 12, 2011why did i have every time a black screen after 1 hour and can do nothing any more. But the music that play with rhytmbox is playing good.No energy saving only screen saver that must be active after 10 min non activitie on pc
View 3 Replies View RelatedUbuntu Networking :: Internet Disconnects Every 2 Hour?
Apr 17, 2010My internet disconnect mabe every second hour and I have to restart the Ubuntu to get internet again. This started to happen when I bought a new wireless card called NETGEAR WG311v3. The live CD didnt have the drivers for it so I had to download XP drivers and install it with ndisrwapper.
So my question is how do I fix it? Do other network drivers crash with my current one? If so how can I see wish one to remove?
Note that my card works fine with XP on same computer.