Slackware :: Unable To Boot After Install Of NetSecL?
Mar 2, 2010
I downloaded NetSecL today to try it out and see what it contains. At first I tried installing it to USB, which after reboot gave me a kernel panic. So I tried installing to my spare laptop, dedicated for testing. Installation went flawless, no errors whatsoever, but when I rebooted the strangest thing happened.
Half of my screen was filled with 07 07 07 and nothing else. No errors on screen, nothing. Not even the LILO boot screen, which I got when booting from USB (just before the kernel panic).
I've used this particular laptop (HP Compaq NX7010) lots of times with a variety of OS and LiveCD, just to try and test, and never have I seen this before.
what this strange behaviour is? I tried installing another OS but got the same behaviour, so I booted from GParted LiveCD, formatted the disk and created a new partition table. After that I was able to install whatever OS I wanted (except the NetSecL).
View 6 Replies
ADVERTISEMENT
Nov 1, 2010
I've a multiboot machine and I recently installed Slackware64-13.1 on sda33. I added menu entry in SUSE boot loader and configured menu list as per [URL].. it returns GrUB error 15. Here is my menu list entry for Slackware -
Code:
###Don't change this comment - YaST2 identifier: Original name: other###
title Slackware64-13.1
root (hd0,32)
kernel /boot/vmlinuz root=/dev/sda33 ro hdd=scsi
savedefault
[Code]...
View 15 Replies
View Related
Feb 17, 2011
I am a slackware 13.1 user , and for the first time today I tried to use slackpkg to update my chromium ( I did everything by hand before ), but unfortunately it did something .... while it was prompting everything it was doing , I saw it removing all my main utilities such as exec, grep, sh .... After the operation completed , I was unable to run anything , everything I clicked on generated the message ( I dont actually remember clearly ) KDE/init/ ' unable to open terminal' Now that I rebooted my system , I get the following error :
++ Kernel Panic - Not syncing : no init found , Try passing init = option to kernel.
Ive looked up some forums and the ways they suggest does not work.
View 4 Replies
View Related
Jul 18, 2011
I'm trying to install Puppy 525 on my Slackware 13.37 PC as a dual-boot using LILO. Puppy is living, all on it's own, in sda6, a 6 GiB partition. It got there by using the Puppy Universal Installer and selecting a 'Full' install, not a 'Frugal' install. I cannot find 'LILO' type instructions, only 'GRUB' type instructions.
Has anyone succeeded in doing a hard drive install of Puppy with the LILO boot loader?
Edit: I'll probably regret it, but I used Puppy's GRUB installer.
View 17 Replies
View Related
May 26, 2010
I had a perfectly working basic 13.0 install on hda4; I installed 13.1 on hda1 and added lilo with an entry for each using expert mode during setup but now neither will boot from this lilo (both try but fail along the way; 13.0 comes up with some errors about sda and 13.1 screen turns black and does nothing) During the 13.0 startup it seemed to use the 13.1 kernel as there was a penguin in the top left instead of the "cat wearing a mask" image that usually shows when it boots.
I think 13.1 installed perfectly and the screen going black is another issue (I don't know why I think that but I just feel it did, it gets further along in boot up)I've managed to get 13.0 back up and bootable by chrooting in and reinstalling lilo but strangely I had to go into its lilo.conf and change sda4 back to hda4 (before this install it had been hda4 and I can't understand why it had changed) I'm running an advent 7101 laptop and have had 12.2 and 13.0 dual booting previously.
View 2 Replies
View Related
Sep 11, 2010
i got a problem in my laptop so i moved the hdd from a laptop to another one like it slack worked but win 7 didn't so i booted slack moved my files from the windows partition to the slack one the i formated the windows sector now i can't go to the Slackware and boot it and i have my files in the /home/root/Desktop so i did try to boot a live cd but i can't access to this file.
View 1 Replies
View Related
Nov 16, 2009
Sometimes, when I need to affect some quick changes on my box, I boot up in runlevel 1 by adding "single" to my kernel line in the Grub menu. I use Grub because I also have Vista+RHEL+CentOS for operational reasons and then Slack for everything else.Since I upgraded to Slack13 I noticed that this was not working. I assumed that it was because I had installed on a encrypted LV, so I tried it on VirtualBox installs. I tried both on GRUB and LILO on the Virtual Slack. I tried both the 32 and 64 bit versions. It does not work.
View 10 Replies
View Related
Jul 4, 2010
I have been given a new old computer, Asus K8N-E with a 2GHz AMD Athlon 64.OpenBSD and Debian works like a charm. But with Slackware 13.1, LILO won't be installed properly. There are two disks: a 10GB ATA-drive with the system and a 250GB SATA-drive as a data repository.
Apparently the computer insists that the SATA is the first disk. Subsequently the bootable partition is not on the first disk and disables LILO to be installed. This is when I try to install LILO to a partition. When it is installed to MBR, it says something about overlapping and can't boot.
View 10 Replies
View Related
Apr 16, 2010
Just grabbed Slackware64-current and installed on my laptop. Also put Alien Bob's multilib on.need it for my Absoft fortran compiler.The problem I'm having is that VirtualBox-3.1.6 doesn't install. I've looked at other problems on the list related to this and I don't think that any of the ones that I've seen applies to my situation. My feeling is that there is an incompatibility problem with gcc. The stock kernel was compiled with gcc-4.4.3 which comes with Slackware64-current. However, Bob's multilib backdates this to gcc-4.3.3. So, when the Virtualbox installation procedure runs it sees a kernel compiled with a version of gcc that is different from the one that is currently installed and chokes. recompile the kernel with the current gcc. Haven't done a kernel compile in a long time though and I'd like to get it right. So, my question is "Is the stock .config file in the linux source folder the one used to configure the default kernel?". I like the stock kernel and would like to recompile with all the bells 'n whistles in the stock kernel.
View 14 Replies
View Related
Aug 18, 2010
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
View 4 Replies
View Related
Apr 12, 2011
I have macbook pro,coare 2 duo 64 bit processor so i downloaded slackware13.1 64 bit but before installing it,i wanted to try it on virtual machine but it is giving me error "this kernel requires an x86-64 cpu,but only detected an i686 cpu. unable to boot-please use a kernel appropriate for your cpu". I checked my machine is 64bit.what should i do now to get slack up and running.
View 3 Replies
View Related
Oct 4, 2010
Just installed slackware 13.0 32bits using the usb-based netinstall. Did a minimal cli install and unchecked bash (since I wanted to use tcsh on this particular OS). But now on first boot it tells me that it shows an error message indicating "unable to identify tty name" and won't let me login (I'm using the root account since I haven't yet set up additional users). My question is, is the error happening because I unselected bash during installation? If so, is there any config file that I can modify to get it to recognize tcsh and let me log in? or if that isn't the problem, where do I set then the tty name?
View 4 Replies
View Related
Mar 23, 2011
I have a brand new Slackware 13.1 x64 installation, and I'm having problems with slapt-get.
I'm unable to upgrade existing packages or install new ones. The output in terminal is:
Code:
bash-4.1# slapt-get -i tar
Reading Package Lists... Done
The following NEW packages will be installed:
tar
[Code]....
Worth mentioning also, I managed to install Gnome from [URL] without any problems immediately prior to this error message starting to appear.
I've been using Debian and Ubuntu derivatives for the last couple of years, so I'm comfortable using the terminal and possibly doing some more advanced stuff.
View 4 Replies
View Related
Apr 6, 2011
I've successfully downloaded openSUSE-11.4(64-bit) ISO image from the openSUSE site,and burned the ISO image successfully into 2 DVD's separately using Nero(ver.7) But I am unable to boot up from the DVD. When I pop in the DVD into my DVD-writer,a few seconds go by with the blinking cursor,and eventually boots off to Windows.The BIOS setting of my machine has been enabled to boot from CD/DVD first before HDD. No error messages are shown while I try to boot. The burned ISO image file is O.K. as it gets successfully verified after writing on the DVD. The image file {openSUSE-11.4 (64-bit)}being 4.29GB in size
View 1 Replies
View Related
Jul 5, 2010
I am installing slackware 13.1 from USB. This will NOT be a dual-boot system.The install appears to work correctly installing to /dev/sda2 (/dev/sda1 is my swap)However I get an error when installing to the LILO to the MBR, root, or even to a floppy drive (I tried all 3 multiple times with no luck)My issues comes when LILO is installing.
After a couple of video warnings I get the following:
Warning: Device 0x0010 inconsistent partition table
CHS address in PT: 15:12:12 --> LBA(230465)
[code]...
View 6 Replies
View Related
Dec 27, 2010
Before i would to say sorry because my bad English,
i have install slackware 13.1 with no problem,but the problem is that i reboot after finish install.
in the middle it's stop booting and can't continue...
View 8 Replies
View Related
May 25, 2011
I have just installed Slackware 13.37 onto /dev/sda1 I during Setup refused to install Lillo. That's a VERY old program
and I can't see why anyone is messing with it these days. So now all I can boot from is a USB memory stick. This is a problem, because it is slow and I have another OS on /dev/sda3 which I would like to have the option to boot. I need boot manager like Grub to boot from the hard drive /dev/sda.I've always had the installing operating system do this automatically, and I expected Slackware 13.37 would act like them other modern distributions, but no such luck.
View 10 Replies
View Related
Oct 24, 2010
Running openSUSE 13.1, and want to dual boot with Slackware to satisfy a long-held curiosity. However, I'm not sure how to proceed with partitioning; at the moment I have about 20gb for openSUSE root, a swap partition and the rest of the 320gb disk is home. Do I just need to add a root partition for Slackware, or are things more complicated than that?
View 1 Replies
View Related
Jun 26, 2011
I'm trying a Windows XP / Slack 13.37 dual-boot install and I wouldn't like to use grub. Then, at first I chose XP and after that LEET, but there was a twice lilo problems. Now I'd like to know:
1)During install what to reply during "Pick Mount Points for /dev/sda1" step, if I use NTFS Windows filesystem?
2)Is NTFS suitable in a XP/Slack dual boot schemes or FAT is in fact better?
View 5 Replies
View Related
Jun 20, 2010
I haven't used Slackware before but I used Ubuntu which I dual-booted with Windows XP.
Now I want to dual-boot Windows XP with Slackware. How do I install Slackware on top of my Windows?
My laptop is a ThinkPad my Windows is XP Pro SP3.
View 9 Replies
View Related
Mar 23, 2011
I need to evaluate PostBooks, an accounting packages that's 32-bit only,needs PostgreSQL and I only have Slackware 64-bit boxes available, I don't really want to install multilib, so I'm thinking VirtualBox for a quick and dirty (got the DVD, got 32-bit, got PostgreSQL, what the heck). Then I got to wondering -- before I screw something up, do you write to the virtual drive MBR or is there a better way?
View 2 Replies
View Related
Apr 4, 2010
I am hoping to find some-one to help me install Slackware on a USB hard-drive and get it to boot. I get it installed just fine, except, when I go to boot into it, I get a kernel-panic --error message. I am sure its the kernel and that I need to some-how set up a initrd, however, I am a little rusty these days and can not quite seem how to do it. I have a Western Digital Passport external (USB) hard-drive. I will joy-in all help, and, I'll keep looking.
View 2 Replies
View Related
Jan 23, 2011
I downloaded slackware disk 1 to 3 via torrent.Now I have 3 nice .rar files which I have uncompressed, and these two accompanying each:slackware-13.1-install.iso.ascslackware-13.1-install.iso.md5I'm running Windows XP, and have nero.The two above files appear to be image files but nero doesn't think so, and I can neither find any other image file to make my install boot cd.I read the other stickied forum topic "So you wan to be a slacker..." which seems to say I should be on the look out for these files:
cdromiso.iso
cdromiso.md5
View 2 Replies
View Related
Jan 22, 2010
I've got Ubuntu installed on my computer but my brothers want Windows XP back. I have the XP disks but when I reboot the computer and it says Boot from CD press any key. I press any key and it doesn't boot, Ubuntu just loads. I tried to change the Bios by pressing F12 but when I get in the menu it won't let me choose. I press the up and down arrows and nothing works. How can I install using the XP disks?
View 4 Replies
View Related
Jul 9, 2010
2nd and 3rd might be linux kernel problems but may help someone else so I included here.1st -- run level 4, /etc/rc.d/rc.4 and xdm -nodaemonJust installed 13.1 on an odd system, including building a new kernel.One thing I do is have the system boot to a command prompt and then run /etc/rc.d/rc.4 to start XBut I found that the rc.4 uses xdm -nodaemon flag and it was causing problems so I removed and all is pretty good. I still see some odd behavior with the virtual ttys sometimes.2nd -- when building a new kernel, I found I need the device-mapper butcouldn't tell if that was a linux kernel issue or something to do with lilo, I didn't want and don't need multiple disk devices like for LVM or MD so I didn't plan to have this enabled.3rd -- CONFIG_EXT4_USE_FOR_EXT23 When that kernel config option was selected and I have only an EXT4 filesystem, the filesystem was mounted as an EXT2, even though the kernel had no EXT2 feature. /etc/fstab specified EXT4 but the mount command showed EXT2. A silent problem that could leave an unpleasant surprise since EXT2 hos no journaling.4th -- I had to run lilo -C by hand in a virtual tty before finishing the install. This was what I had to do when installing 13.0 on different hardware. It seems that the lilo part of the install needs some sorting out.
View 9 Replies
View Related
Jan 19, 2010
I have just install both fedora 12 and slackware 13 on my laptop I did not install lilo because fedora uses grub I am able to use slackware by using the the DVD and booting from the command prompt I have attached my grub .conf file also when i boot from cd the command is as follows
[Code]...
View 16 Replies
View Related
Feb 20, 2010
I'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
View 4 Replies
View Related
Jan 17, 2009
Just installed a fresh copy of F10. After install, when I boot It goes through a screen where it shows 3 bars loading. Once the last bar (white) is finished, and fedora 10 becomes white, nothing happens. If i press any key, it will give me a msg saying something along the lines of "reading contents of drive vol000 this make take a while". I rebooted after 2 hours. When i came back, I waited 8 hours.
View 4 Replies
View Related
Nov 9, 2010
I am unable to boot the xen kernel but can boot the desktop kernel. The machine boots and the last message I see is:
(Xen) Created cpupool 0 with Scheduler SMP Credit Scheduler (Credit)
After this the screen just turns into a random mess. It looks like graphics memory is pointing at a area of memory filled with random data. The computer actually boots but the display is unusable and the keyboard fails (num lock doesn't work). I can cleanly halt by pressing the power button and waiting for disk activity to stop. After reading several other threads I've tried various combinations of vga=mode-0x0f00 and nomodeset but the result is always the same. I've set the vga mode to 0x0f00 as I actually get to see up to the "Created cpupool...." in this mode. The system boots without any issues with opensuse 11.2.
I'm using a gigabyte GA-Q35M motherboard and the output from lspci is:
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02) .....
View 7 Replies
View Related
Nov 14, 2010
I recently installed ubuntu on my netbook (asus eee PC). The problem is, when I restarted the computer and got to the overview on what to boot and chose Windows 2000/xp/vista etc etc sda1, I am not able to boot into windows. There is just a blinking underline _ <- like that in the top left corner. And nothing happens. I cannot risk to lose my files that are on the windows partition. What can I do?
View 6 Replies
View Related
