Slackware :: Install A Boot Manager For 13.37?
May 25, 2011
I have just installed Slackware 13.37 onto /dev/sda1 I during Setup refused to install Lillo. That's a VERY old program
and I can't see why anyone is messing with it these days. So now all I can boot from is a USB memory stick. This is a problem, because it is slow and I have another OS on /dev/sda3 which I would like to have the option to boot. I need boot manager like Grub to boot from the hard drive /dev/sda.I've always had the installing operating system do this automatically, and I expected Slackware 13.37 would act like them other modern distributions, but no such luck.
View 10 Replies
ADVERTISEMENT
Oct 4, 2010
I have been trying to install a different window manager on Slackware. I have downloaded from here [URL].. And I have followed this guide to install wmii [URL].. Now when I follow the same patter, I get this error:
Quote:
root@sslf:/home/sslf/Essential# ./wmii
bash: ./wmii: is a directory
root@sslf:/home/sslf/Essential# ./wmii/wmii.SlackBuild
tar: /home/sslf/Essential/wmii-3.6.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
root@sslf:/home/sslf/Essential#
View 14 Replies
View Related
Feb 18, 2011
I don't think that the KDE Partition Manager works well on my PC. When I have used it, it often says that there was some sort of error; details escape me. But, if I do the exact same thing with Parted Magic Live CD, I get no errors. SlackBuilds has gparted with 6 dependencies. If I use sbopkg, do I select the last dependency first, the second to last dependency second and so on, or does order matter? Finally, and I am embarrassed to ask this in a Slackware forum but, is there an easier way to get a different partition manager? Is there a better partition manager?
View 6 Replies
View Related
May 28, 2011
I have problem with my new distro and fluxbox. So I installed a slackware 13.37 with fluxbox, this is my first time with slack and fluxbox
I dont know how to install some netowrk manager and configure it in fluxbox I need wifi.
View 14 Replies
View Related
Mar 8, 2011
I've been using KVM with great results on Slackware but one thing about Xen 4 that appeals to me is VGA and PCI passthru. I did try to install the Xen Slackbuild some time ago but failed. I'm afraid I can't remember why now. As far as I remember the Slackbuild was just out a day or so, so perhaps there were unresolved issues in the early days. How is Xen now? Does it run as well as KVM, for HVM as well as PV guests? Does virt-manager allow you to create Xen VMs or just KVM VMs? I'm very happy with KVM on Slackware (and Xen on NetBSD) but as I say, the Xen 4 release has some enticing features which pretty much do away with dual- and multi-booting. Full-throttle graphics in a VM?
View 2 Replies
View Related
Jul 18, 2011
I'm trying to install Puppy 525 on my Slackware 13.37 PC as a dual-boot using LILO. Puppy is living, all on it's own, in sda6, a 6 GiB partition. It got there by using the Puppy Universal Installer and selecting a 'Full' install, not a 'Frugal' install. I cannot find 'LILO' type instructions, only 'GRUB' type instructions.
Has anyone succeeded in doing a hard drive install of Puppy with the LILO boot loader?
Edit: I'll probably regret it, but I used Puppy's GRUB installer.
View 17 Replies
View Related
Jan 7, 2010
I had my motherboard fail and had to do a replacement. The motherboard I got has a feature (I don't think I can shut off) that lets you select what drive you want to boot off of. I have XP installed on the first drive and openSUSE 11.1 on the second drive. I am running openSUSE 11.2 with KDE 3.5 and I simply dropped my drives onto this new motherboard. I can boot up (Linux) just fine but am having other issues with my mouse. I am thinking of Updating to openSUSE 11.2 and the current KDE version.
Should I just update to 11.2 or do a new install. I have LOTS of data in my home directory I really don't want to lose and have a partition for data as well that is pretty full. I don't want to lose this stuff. What should I do about Grub with this BIOS that lets you pick which drive to boot off of? Put Grub in the MBR of the drive with openSUSE on it and nuke the MBR of the XP drive?
View 9 Replies
View Related
Jan 27, 2011
When I installed fedora I told the installation routine to use the free hard disk space. I had 98gb of free space. After the installation I look under the MyComputer icon checked the free space which is 45gb. Well I have a hard time believing that I have used half of 98gb already. There must be something going on here.Also.. With regards to the boot manager. It made Fedora the default OS. While I don't really have a problem with that is there a way to change it so that my other OS is the default? I use two operating systems and sometimes one week I'm using one primarily and then things will change.
View 5 Replies
View Related
Jul 21, 2010
Previous installation (11.1) left boot manager intact and I had three options on menu. Windoze, OS/2 and Opensuse. They all worked and if I selected Opensuse I then got a Grub boot screen with normal options from which I could start opensuse as usual.
New installation of 11.3 I selected MBR option but think I must have left grub as the boot method. I now boot into the grub screen but if I select OS/2 there is only Windoze left on menu and no OS/2.
What should I use to put back the booting to how it was? Can I use opensuse program to do it or should I use OS/2 partition manager?
View 1 Replies
View Related
Mar 14, 2011
i'm currently using windows vista and want to boot ubuntu10.10 from my usb drive but my BIOS doesn't support it.
View 3 Replies
View Related
Feb 13, 2011
I am very happy to announce that today I succeeded to install full Slackware ARM on the pandaboard: URL...I did the following:
* sd with 2 partitions, one (vfat) for bootloaders (MLO, u-boot.bin) and uImage and the other one (ext2) for minirootfs
* copy xloader (MLO), uboot and uImage from Angstrom distro on the first partition
* copy Slackware ARM minirootfs on the second partition with Angstrom modules in the usual path (/lib/modules/...)
* boot in ARMedslack
* install all the others packages via NFS
I had to make some changes to configuration files as indicated here:URL...The next step is to build a kernel and modules for omap4 by myself and use them instead of the Angstrom ones.One question: is there any kind of package manager, such as slap-get, sbopkg, etc. for Slackware ARM? If not, can I use the SlackBuilds from slackbuilds.org? How to modify them?
View 6 Replies
View Related
Jun 2, 2010
my Windows partition and the future Suse partition will be on different HDDs, so this should ease things a bit. Suse is on HDD 2 and Windows on HDD 1 HDD 2 will be the default Master drive, so I want GRUB to give me to option to boot either on Suse, either on Windows 7 I want to keep Windows 7 boot manager intact. I.E. If I switch HDD 1 to the Master drive, it will boot directly into Win 7.
What I wanted to do is:
Unplugg Windows drive
Install Suse
Replugg Windows drive and manually add the entry to GRUB
if I keep them both plugged, Linux will not touch HDD 1 MBR?
View 9 Replies
View Related
Mar 14, 2011
i'm currently using windows vista and want to boot opensuse11.4 from my usb drive but my BIOS doesn't support it. please explain steps to install it on vista hard-disk,i'm getting confused following steps posted on theris website
View 4 Replies
View Related
Apr 22, 2010
I cannot get package installer, either Synaptic, Ubuntu Center, sodo aptitude install or plain double clicking on .deb files I have already downloaded on my PC to work.I get this:dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.When I do(even after a clear)sudo dpkg --configure. Ubuntu goes and tries to mess up with my boot configuration. wtf does installing a package have to do with messing up my lilo? I get this regardless of how I try to install the package and it makes no sense(ok, If I do this graphically, I get the same errors from a widget window)
View 2 Replies
View Related
Jul 5, 2010
I am installing slackware 13.1 from USB. This will NOT be a dual-boot system.The install appears to work correctly installing to /dev/sda2 (/dev/sda1 is my swap)However I get an error when installing to the LILO to the MBR, root, or even to a floppy drive (I tried all 3 multiple times with no luck)My issues comes when LILO is installing.
After a couple of video warnings I get the following:
Warning: Device 0x0010 inconsistent partition table
CHS address in PT: 15:12:12 --> LBA(230465)
[code]...
View 6 Replies
View Related
Dec 27, 2010
Before i would to say sorry because my bad English,
i have install slackware 13.1 with no problem,but the problem is that i reboot after finish install.
in the middle it's stop booting and can't continue...
View 8 Replies
View Related
Oct 24, 2010
Running openSUSE 13.1, and want to dual boot with Slackware to satisfy a long-held curiosity. However, I'm not sure how to proceed with partitioning; at the moment I have about 20gb for openSUSE root, a swap partition and the rest of the 320gb disk is home. Do I just need to add a root partition for Slackware, or are things more complicated than that?
View 1 Replies
View Related
Jun 26, 2011
I'm trying a Windows XP / Slack 13.37 dual-boot install and I wouldn't like to use grub. Then, at first I chose XP and after that LEET, but there was a twice lilo problems. Now I'd like to know:
1)During install what to reply during "Pick Mount Points for /dev/sda1" step, if I use NTFS Windows filesystem?
2)Is NTFS suitable in a XP/Slack dual boot schemes or FAT is in fact better?
View 5 Replies
View Related
Jun 20, 2010
I haven't used Slackware before but I used Ubuntu which I dual-booted with Windows XP.
Now I want to dual-boot Windows XP with Slackware. How do I install Slackware on top of my Windows?
My laptop is a ThinkPad my Windows is XP Pro SP3.
View 9 Replies
View Related
Mar 23, 2011
I need to evaluate PostBooks, an accounting packages that's 32-bit only,needs PostgreSQL and I only have Slackware 64-bit boxes available, I don't really want to install multilib, so I'm thinking VirtualBox for a quick and dirty (got the DVD, got 32-bit, got PostgreSQL, what the heck). Then I got to wondering -- before I screw something up, do you write to the virtual drive MBR or is there a better way?
View 2 Replies
View Related
Apr 4, 2010
I am hoping to find some-one to help me install Slackware on a USB hard-drive and get it to boot. I get it installed just fine, except, when I go to boot into it, I get a kernel-panic --error message. I am sure its the kernel and that I need to some-how set up a initrd, however, I am a little rusty these days and can not quite seem how to do it. I have a Western Digital Passport external (USB) hard-drive. I will joy-in all help, and, I'll keep looking.
View 2 Replies
View Related
Mar 2, 2010
I downloaded NetSecL today to try it out and see what it contains. At first I tried installing it to USB, which after reboot gave me a kernel panic. So I tried installing to my spare laptop, dedicated for testing. Installation went flawless, no errors whatsoever, but when I rebooted the strangest thing happened.
Half of my screen was filled with 07 07 07 and nothing else. No errors on screen, nothing. Not even the LILO boot screen, which I got when booting from USB (just before the kernel panic).
I've used this particular laptop (HP Compaq NX7010) lots of times with a variety of OS and LiveCD, just to try and test, and never have I seen this before.
what this strange behaviour is? I tried installing another OS but got the same behaviour, so I booted from GParted LiveCD, formatted the disk and created a new partition table. After that I was able to install whatever OS I wanted (except the NetSecL).
View 6 Replies
View Related
Mar 4, 2011
How to boot from iso in Virtual Manager manager I know I can create new machine to boot from it. but I just want to know if there is something like "change boot device" "boot using iso image" in virtual machine manager
View 1 Replies
View Related
Jan 23, 2011
I downloaded slackware disk 1 to 3 via torrent.Now I have 3 nice .rar files which I have uncompressed, and these two accompanying each:slackware-13.1-install.iso.ascslackware-13.1-install.iso.md5I'm running Windows XP, and have nero.The two above files appear to be image files but nero doesn't think so, and I can neither find any other image file to make my install boot cd.I read the other stickied forum topic "So you wan to be a slacker..." which seems to say I should be on the look out for these files:
cdromiso.iso
cdromiso.md5
View 2 Replies
View Related
Jul 9, 2010
2nd and 3rd might be linux kernel problems but may help someone else so I included here.1st -- run level 4, /etc/rc.d/rc.4 and xdm -nodaemonJust installed 13.1 on an odd system, including building a new kernel.One thing I do is have the system boot to a command prompt and then run /etc/rc.d/rc.4 to start XBut I found that the rc.4 uses xdm -nodaemon flag and it was causing problems so I removed and all is pretty good. I still see some odd behavior with the virtual ttys sometimes.2nd -- when building a new kernel, I found I need the device-mapper butcouldn't tell if that was a linux kernel issue or something to do with lilo, I didn't want and don't need multiple disk devices like for LVM or MD so I didn't plan to have this enabled.3rd -- CONFIG_EXT4_USE_FOR_EXT23 When that kernel config option was selected and I have only an EXT4 filesystem, the filesystem was mounted as an EXT2, even though the kernel had no EXT2 feature. /etc/fstab specified EXT4 but the mount command showed EXT2. A silent problem that could leave an unpleasant surprise since EXT2 hos no journaling.4th -- I had to run lilo -C by hand in a virtual tty before finishing the install. This was what I had to do when installing 13.0 on different hardware. It seems that the lilo part of the install needs some sorting out.
View 9 Replies
View Related
Jan 19, 2010
I have just install both fedora 12 and slackware 13 on my laptop I did not install lilo because fedora uses grub I am able to use slackware by using the the DVD and booting from the command prompt I have attached my grub .conf file also when i boot from cd the command is as follows
[Code]...
View 16 Replies
View Related
Feb 20, 2010
I'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
View 4 Replies
View Related
Jan 5, 2011
I just received my Slackware 13.1 & the 'Official Guide to Slackware Linux' book. I know that there is a big learning curve to use Slackware and that is why I purchased it - according to Distrowatch, "...if you learn Slackware, you learn Linux!" But, while I am 'learning Linux', I would still like to have a linux distro installed that would be more of a 'no-brainer'.
So the question is, which distro should I install first, Slackware or say, OpenSuse? I know that if I were going to dual-boot with XP, that XP should be installed first - does order matter for 2 linux distros too? Also, are there any points to remember to do during the installation processes so that I end up with a working, dual-boot computer?
View 7 Replies
View Related
Mar 16, 2010
After a fresh install of Ubuntu 9.10-64bit I don't have Hardware Manager, Update Manager or Software Resources just to name a few.I tried sudo apt-get update & sudo apt-get upgrade & everything is up to date.
View 9 Replies
View Related
Jan 6, 2010
In light of my previous achievement in wireless networking, I've decided to create a larger issue for myself to solve. Which hopefully I can get some help with. Because my system is totally kisspoped up, for those of you who get what that means. I was trying to install GRUB via the .txz package and it created a mirrored image of the /boot folder. Which for some reason contained the / folder. Which in turn held /boot and all the other folders / is expected to contain.
Now, trying to remove the extra /boot folder proved difficult, but once I finally was able to figure it out, I remembered I could removepkg and that would probably mend the situation. However, I was already 20-something percent through moving the files to trash. Now when I checked /, /boot was gone from there. Along with various other folders. SO! Apparently the /tmp/boot folder created was in reality the /boot folder, albeit in the wrong place and having the wrong contents. Somehow, one folder existed as two different versions of itself at the same point in time. Much as a Time Lord might. Deleting one made the other vanish with it.
Good news:I removed it via Thunar and it should be in the root user's trash /home and some other folders had yet to be trashed when I hit cancel, so I can still use some things Bad news:I never ran X as root, so I don't know if it HAS a trash folder I can only use things already started up because the binaries are gone, but the configuration files in /home are still there (although /usr/bin remains)
Ideally, there would be a big UNDO button somewhere in this long row of function keys. Reasonably, there should be some kind of restoration tool. Realistically, I think I'm going to have to reinstall the system, which wasn't easy in the first place due to my faulty disc bay which detects discs at will.
View 6 Replies
View Related
