Ubuntu Servers :: System Hangs When Get Higher Resolution Than 640x480?
May 17, 2010
I have just installed Ubuntu Server 10.04. With Version 8.04 I had no problem to change the resolution from 640x480 to 1440x900 (console, no GUI installed). With 10.04, it does not work, the only resolution that works is 640x480. I have tried the following:
Changed: GRUB_GFXMODE=1440x900
Result: Success, Grub comes up with 1440x900, but when booting, the resolution changes to 640x480
Changed: GRUB_GFXPAYLOAD_LINUX=1440x900
Result: Booting -> blank screen > automatic reboot
Changed: GRUB_GFXPAYLOAD_LINUX=keep
[Code]...
View 5 Replies
ADVERTISEMENT
Jan 2, 2010
My Ubuntu can not go any higher then 640x480. I have found out what the problem is. The monitor has broken down (firmware or some thing) but still works fine in Windows. How do i know this ? Well a few mouths ago i was on Windows Me and one day it booted up saying that it is installing a default driver for the screen , so i let it do and after it did that it would never use the VA702 driver. Also the resolution could get higher then 1280x1024(this is the screens biggest res). A other mouth later i installed Windows XP and when using it i tried to install the VA702 driver but it did not work so i had to manually install it which worked but did not get correct resolutions e.g. could go higher than the monitor is meant to go. Now in Ubuntu can't go higher then 640x480. How can i fix this ?
Screen : ViewSonic VA702
Graphics Card : Winfast My Vivo A170 Geforce 4 MX 440 AGP 4x 64MB DDR
Ubuntu:9.10
View 2 Replies
View Related
May 24, 2010
Resolution won't go higher than 640x480 with a TV
View 1 Replies
View Related
May 24, 2010
I have a FX 5200 and a 26" TV with VGA input which supports 1330x760. No problem with this in Windows, but in Ubuntu, as soon as I install nvidia drivers (175) resolution goes 640x480.
I've tried editing xorg.conf in several different ways, but resolution didn't change, maybe I was doing it the wrong way.
PD: 10.04 Lucid Lynx fresh install
View 1 Replies
View Related
Feb 8, 2011
am just coming from a clean install of Lucid Server x64 on a desktop configuration. No problems really but for one.With no GUI installed -something I wish to remain as is- I am having difficulties browsing through bash due to low resolution. So the question is: "how can I go to a higher screen resolution?"
View 8 Replies
View Related
Dec 7, 2009
I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies
View Related
Nov 8, 2010
İ have nvidia fx 5200. when i was install my driver resolution stack at 640x480 and i cant change to 1024x768.
View 1 Replies
View Related
Feb 10, 2010
I am test driving Ubuntu 9.04 (Desktop) - the screen resolution always pops up as 800 x 600 - Preference Display tells me there is a different graphics driver (which I have installed) and set to 1280 X 800 which then works till I re-boot. I changed it in NVIDIA X Server Settings. When I try to save to X configuration I get a message "Unable to create new X config backup file '/etc/X11/xorg.conf.backup'." - which I presume is because I am not in superuser mode - how do I set up a superuser account (is this even possible?) or is there a nioce simple way for a real newbie to fix this?
View 3 Replies
View Related
Aug 12, 2009
I am running fedora 11 live cd on a work computer waiting on a new harddrive. Ran knoppix and Gos 3.1 fine. they start at 800x600 but can relatively easily be changed to much better but fedora likes this really low resolution on the monitor 640x480. In Gos I unhide screens and graphics and change it there but fedora doesn't seem to have this basic setting utility. Where is it in fedora or its equivilant. The basic monitor setting only offers the 1 option and even this box is not fully visible, ok and cancel are cut off at the bottom. Going back to Gos for now, though someone managed to crash it while surfing the net. mATX Via chipset p4m800 s3 unichrome graphics. linux loads vesa drivers instead of s3 unichrome drivers.
View 1 Replies
View Related
Aug 25, 2010
I have on old Thinkpad T42 with the Mobility Radeon 7500 graphics chip. It used to work like a charm with the open source radeon driver, until KMS came along. It had no problems except for fullscreen being always black. I thought this is because I have an old card, and used 'nomodeset' in the kernel line, which strangely cranked up the memory usage and made the system choppier, but I managed. Today I was testing the use of an external monitor at home, and found out not only that it only works properly with KMS enabled, but fullscreen games work like a charm (e.g. DOSBox, which I use a lot).
After experimenting a bit, I found out that on the internal display (LCD), 640x480 produces a black screen, while others work as expected. so i set dosbox to use 800x600 as the fullscreen resolution, and it works. The problem is that there are a lot of games (and apps) that I use which provide no configuration options to set the resolution, so I end up with a black screen (when I'm using the internal display, of course). Bottom line: I'm not asking for anyone to fix my problems from a distance, basically blindfolded.
View 7 Replies
View Related
Jun 14, 2010
I am a first time user and recently installed 9.10 from a LiveCd then immediately upgraded to 10.04 LTS. I had no black screen problem, but my resolution is stuck at 640x480 with no other options. I upgraded my driver to NVIDIA-Linux-x86_64-195.36.31 and the resolution remains the same. I have a Geforce GTS 250 and an Acer H233H capable of 1920x1080_75.
My XFile:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Jun 3 09:41:37 PDT 2010
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package .....
I have tried entering a CVT generated modeline to the xorg file but it did nothing.
View 2 Replies
View Related
Jan 10, 2011
Just upgraded from Etch and now I'm stuck at 640x480 resolution. Xorg.conf doesn't show any display modes, and xrandr gives the only resolution as 640x480. The laptop is a Toshiba Tecra 730XCDT. I know its a doorstop, but 800x600 worked fine under Etch. Anyone know how to to change it back? It's really hard to look at right now.
View 3 Replies
View Related
Apr 23, 2009
I've finally managed to get the nvidia driver on my Lenny box. However I've now found that I can't change resolution from 640x480, the nvidia panel shows this and 320x240 as the only resolution. The layout shows "hidden as under 600 pixels" If I go to gnome screen resolutions it only shows 640x480. If I plug a second monitor in it won't detect it.
I'm using NVIDIA-Linux-x86-180.51-pkg1.run, older versions appear not to work with Lenny crashing x on boot. How to change resolution on the nvidia in Lenny?
View 5 Replies
View Related
Sep 7, 2010
I made a total reinstall of Slack 13.1 the other day and all went seemingly well. After a lot of experimenting and deciding I wanted the disk partitioned differently, a reinstall felt about right. But when I started X the resolution was all too low. xorg.conf was adjusted with the properties of my screen (GDM 4011P). Once upon a time, the Xorg config-tool would ask me my opinion, but now it flashes by and I have to live with what it comes up with.
The nVidia driver was installed (legacy for GeForce 3). I know the config is read, because it fails parsing if I have kHz with the sync-figures. But it otherwise disregard my wish to run at 1280x1024. In XFCE I can run the nVidia configuration tool, but it offers only auto, 320x240 or 640x480. The screen is too small for me to click "ok" on several occasions. The machine is capable of 64bit, 2GHz. But I installed the 32bit version of 13.1, it has 1,5GB RAM.
View 8 Replies
View Related
Jun 13, 2009
Just installed 5.3 into a VMWare image.
In System > Preferences > Screen Resolution I only get 640x480 option.
How do I get 1024 x 768?
View 2 Replies
View Related
Oct 20, 2010
I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !
I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).
View 9 Replies
View Related
Feb 10, 2010
I am RHEL 5. I just installed it and when i try to config display it how only two resolution by default 640x480,800x600.No other resolution option is shown. I tried by editing xorg.conf but of no use.
View 2 Replies
View Related
Apr 27, 2010
I use slackware 13.0 64bit and VGA EN9400GT, I have two monitor samsung that is: SNX(CRT-0) && 943SNX(CRT-1) series, i had try setting it in nvidia X server settings but the resolution as CRT-1 only have 2 options that is: 640x480 & 320x240. this is my xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Mar 12 02:13:46 PST 2010
[Code]....
View 14 Replies
View Related
Jan 23, 2010
I have a fujitsu siemens monitor C776 (built by Hansol E17CL)
FC12 can't autodetect it
If I go system -> preferences -> display the button: detect monitor does not work
I can't change resolution which is stopped at 640x480:
View 1 Replies
View Related
Jan 8, 2010
I'm trying to make get a higher resolution when I use Ctrl+Alt+F2, I've looked up in other forums but apparently 9.10 changed its methods to fixing your desired resolution. I've tried other ways of changing it but I get an error when I boot in to the system, I have Ubuntu 9.10 64-bit, a GeForce 8800m GTS, the highest my screen can go is 1440x900.
View 9 Replies
View Related
Jul 2, 2010
I have just done a clean install of 10.04 and cannot for the life of me set the resolution higher then 800x600 When I go to change the resolution I am greeted with a unknown monitor.
lspci | grep -i vga
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
Here is the Xorg config file I have configured
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
[Code].....
View 4 Replies
View Related
Jan 1, 2011
I've changed my operating system from Vista to Linux Ubuntu 10.10. Now I stand in front of the problem to change the screen resolution. The current resolution is 800x600.How can I change to a higher resolution?
View 7 Replies
View Related
Mar 3, 2010
I am having a major problem in a new Karmic install. Big rationalisation. Kicked out a lot of machines in favour of Virtual machines. Installed Karmic. Machine has dual 22" wide screen monitors, max res 1680 x 1050. Karmic installed at maximum 800 x 600 and will not go above that. I have looked for xorg.conf and cannot find one anywhere. I have tried the randr as shown by Sharaq but when I try to set the higher resolution it gives message saying maximum size is 800 x 600. I have downloaded the proprietory drivers from Radeon and tried to run them. The installer runs but I cannot get to the 'Continue' button because it is off the bottom of my screen so I cannot set up the drivers. I suspect I am going to have the same problem with the Lucid install I did yesterday. Earlier releases never gave me this issue so why now?
Why is the initial resolution so low?
View 8 Replies
View Related
May 7, 2010
I have been on Ubuntu for a total of about 1 hour now, as I have finally made the switch from Windows. So far so good, but I do have some learning to do. First off, when I got Ubuntu 10.04 installed, everything worked great! Video lagged a little however. No biggy. The next time I booted up, it asked if I wanted to install video card drivers. I thought this is why my video was lagging, so I said yes. It then automatically installed my nvidia card drivers.
Then when I rebooted, I was greeted with a 640x480 screen resolution. When I go to System->Preferences->Monitors, I am given a warning that says: "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics drivers vendor's tool instead?"
Regardless if I hit "yes" or "no" I am brought to windows that should allow me to change resolutions. However, the only resolutions I can choose are 640x480 and 320x240. I know my "monitor" can support higher resolutions as I was running it at higher resolutions before the switch to Ubuntu. (I put monitor in quotes, as I am using a large rear projection T.V. as my monitor). How I can get a higher resolution?
View 4 Replies
View Related
Sep 18, 2010
I installed Ubuntu on two seperate boxes and one of them switched itself to a higher screen resolution than the other somehow. I prefer the newer screen resolution but don't know how to switch the other box to that resolution.
View 3 Replies
View Related
Mar 29, 2010
I'd like a distribution with KDE.
I've tried Kubuntu, but I don't get any higher screen resolution than 640*480. The graphics adapter that seems to get me in trouble is an Intel based one.
I'm open to other OS'es that uses KDE -I just need to be able to use Kdenlive.
View 5 Replies
View Related
Jan 1, 2011
I have installed Ubuntu 10.10 as a virtual machine under my Win7 windows. Everything is OK except that I can not get resolution higher than 800*600. Actually there are two options in Display Settings Menu 800*600 and 640*480. But my laptop has 15.4 inch monitor so its normal resolution is 1280*800.
View 3 Replies
View Related
Jan 10, 2010
I have a problem with the screen resolution in that most of the time it defaults to 800 x 600. However on occasions when I switch on the resolution increases however just today when it happened after typing in my password it refused to log me in.
Before anyone asks my password is in lower case and the NUMLOCK is off and I know I'm not mis-typing it.
here's the strange bit, when I reset the computer and the resolution goes back to 800 x 600 it then accepts my password. go figure!
View 1 Replies
View Related
Dec 6, 2010
I have what I think is a pretty eay question. I'm trying to set the screen resolution of my new 10.10 installation to 1920x1080. The monitor only supports up to 1024x768, but i would like more area. I've done this before but I forgot how i did it. In the end the screen spilled off to the sides and when I ran my cursor over to that section it would disply it. I have a feeling that i need to edit my xorg.conf file, but my nvidia drive has some new mode types and i figured I'd ask before making random changes.
below is my xorg.conf file.
UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
[Code]...
View 2 Replies
View Related
Mar 5, 2011
I recently installed Ubuntu 10.04 in my computer, I ran update manager and installed all the actualization but and I can not set the screen resolution higher than 800x600; I have windows XP installed in another partition and the screen resolution can get to 1028x1024 at 85 hz. I have a Pentium 4, 2.20 ghz, 1gb ram, and the video card is a SiS (Silicone Integrated Systems) 300/305/630/540/730 32 Mb.
View 4 Replies
View Related
